Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Beniamino Galvani | 850 | 81.18% | 1 | 5.56% |
Neil Armstrong | 84 | 8.02% | 2 | 11.11% |
Heiner Kallweit | 51 | 4.87% | 5 | 27.78% |
Sean Young | 27 | 2.58% | 5 | 27.78% |
Alex Deryskyba | 20 | 1.91% | 1 | 5.56% |
Javier Martinez Canillas | 7 | 0.67% | 1 | 5.56% |
Andi Shyti | 3 | 0.29% | 1 | 5.56% |
caihuoqing | 3 | 0.29% | 1 | 5.56% |
Uwe Kleine-König | 2 | 0.19% | 1 | 5.56% |
Total | 1047 | 18 |
// SPDX-License-Identifier: GPL-2.0 /* * Driver for Amlogic Meson IR remote receiver * * Copyright (C) 2014 Beniamino Galvani <b.galvani@gmail.com> */ #include <linux/device.h> #include <linux/err.h> #include <linux/interrupt.h> #include <linux/io.h> #include <linux/module.h> #include <linux/of_platform.h> #include <linux/platform_device.h> #include <linux/spinlock.h> #include <linux/bitfield.h> #include <media/rc-core.h> #define DRIVER_NAME "meson-ir" /* valid on all Meson platforms */ #define IR_DEC_LDR_ACTIVE 0x00 #define IR_DEC_LDR_IDLE 0x04 #define IR_DEC_LDR_REPEAT 0x08 #define IR_DEC_BIT_0 0x0c #define IR_DEC_REG0 0x10 #define IR_DEC_FRAME 0x14 #define IR_DEC_STATUS 0x18 #define IR_DEC_REG1 0x1c /* only available on Meson 8b and newer */ #define IR_DEC_REG2 0x20 #define REG0_RATE_MASK GENMASK(11, 0) #define DECODE_MODE_NEC 0x0 #define DECODE_MODE_RAW 0x2 /* Meson 6b uses REG1 to configure the mode */ #define REG1_MODE_MASK GENMASK(8, 7) #define REG1_MODE_SHIFT 7 /* Meson 8b / GXBB use REG2 to configure the mode */ #define REG2_MODE_MASK GENMASK(3, 0) #define REG2_MODE_SHIFT 0 #define REG1_TIME_IV_MASK GENMASK(28, 16) #define REG1_IRQSEL_MASK GENMASK(3, 2) #define REG1_IRQSEL_NEC_MODE 0 #define REG1_IRQSEL_RISE_FALL 1 #define REG1_IRQSEL_FALL 2 #define REG1_IRQSEL_RISE 3 #define REG1_RESET BIT(0) #define REG1_ENABLE BIT(15) #define STATUS_IR_DEC_IN BIT(8) #define MESON_TRATE 10 /* us */ struct meson_ir { void __iomem *reg; struct rc_dev *rc; spinlock_t lock; }; static void meson_ir_set_mask(struct meson_ir *ir, unsigned int reg, u32 mask, u32 value) { u32 data; data = readl(ir->reg + reg); data &= ~mask; data |= (value & mask); writel(data, ir->reg + reg); } static irqreturn_t meson_ir_irq(int irqno, void *dev_id) { struct meson_ir *ir = dev_id; u32 duration, status; struct ir_raw_event rawir = {}; spin_lock(&ir->lock); duration = readl_relaxed(ir->reg + IR_DEC_REG1); duration = FIELD_GET(REG1_TIME_IV_MASK, duration); rawir.duration = duration * MESON_TRATE; status = readl_relaxed(ir->reg + IR_DEC_STATUS); rawir.pulse = !!(status & STATUS_IR_DEC_IN); ir_raw_event_store_with_timeout(ir->rc, &rawir); spin_unlock(&ir->lock); return IRQ_HANDLED; } static int meson_ir_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct device_node *node = dev->of_node; const char *map_name; struct meson_ir *ir; int irq, ret; ir = devm_kzalloc(dev, sizeof(struct meson_ir), GFP_KERNEL); if (!ir) return -ENOMEM; ir->reg = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(ir->reg)) return PTR_ERR(ir->reg); irq = platform_get_irq(pdev, 0); if (irq < 0) return irq; ir->rc = devm_rc_allocate_device(dev, RC_DRIVER_IR_RAW); if (!ir->rc) { dev_err(dev, "failed to allocate rc device\n"); return -ENOMEM; } ir->rc->priv = ir; ir->rc->device_name = DRIVER_NAME; ir->rc->input_phys = DRIVER_NAME "/input0"; ir->rc->input_id.bustype = BUS_HOST; map_name = of_get_property(node, "linux,rc-map-name", NULL); ir->rc->map_name = map_name ? map_name : RC_MAP_EMPTY; ir->rc->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER; ir->rc->rx_resolution = MESON_TRATE; ir->rc->min_timeout = 1; ir->rc->timeout = IR_DEFAULT_TIMEOUT; ir->rc->max_timeout = 10 * IR_DEFAULT_TIMEOUT; ir->rc->driver_name = DRIVER_NAME; spin_lock_init(&ir->lock); platform_set_drvdata(pdev, ir); ret = devm_rc_register_device(dev, ir->rc); if (ret) { dev_err(dev, "failed to register rc device\n"); return ret; } ret = devm_request_irq(dev, irq, meson_ir_irq, 0, NULL, ir); if (ret) { dev_err(dev, "failed to request irq\n"); return ret; } /* Reset the decoder */ meson_ir_set_mask(ir, IR_DEC_REG1, REG1_RESET, REG1_RESET); meson_ir_set_mask(ir, IR_DEC_REG1, REG1_RESET, 0); /* Set general operation mode (= raw/software decoding) */ if (of_device_is_compatible(node, "amlogic,meson6-ir")) meson_ir_set_mask(ir, IR_DEC_REG1, REG1_MODE_MASK, FIELD_PREP(REG1_MODE_MASK, DECODE_MODE_RAW)); else meson_ir_set_mask(ir, IR_DEC_REG2, REG2_MODE_MASK, FIELD_PREP(REG2_MODE_MASK, DECODE_MODE_RAW)); /* Set rate */ meson_ir_set_mask(ir, IR_DEC_REG0, REG0_RATE_MASK, MESON_TRATE - 1); /* IRQ on rising and falling edges */ meson_ir_set_mask(ir, IR_DEC_REG1, REG1_IRQSEL_MASK, FIELD_PREP(REG1_IRQSEL_MASK, REG1_IRQSEL_RISE_FALL)); /* Enable the decoder */ meson_ir_set_mask(ir, IR_DEC_REG1, REG1_ENABLE, REG1_ENABLE); dev_info(dev, "receiver initialized\n"); return 0; } static void meson_ir_remove(struct platform_device *pdev) { struct meson_ir *ir = platform_get_drvdata(pdev); unsigned long flags; /* Disable the decoder */ spin_lock_irqsave(&ir->lock, flags); meson_ir_set_mask(ir, IR_DEC_REG1, REG1_ENABLE, 0); spin_unlock_irqrestore(&ir->lock, flags); } static void meson_ir_shutdown(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct device_node *node = dev->of_node; struct meson_ir *ir = platform_get_drvdata(pdev); unsigned long flags; spin_lock_irqsave(&ir->lock, flags); /* * Set operation mode to NEC/hardware decoding to give * bootloader a chance to power the system back on */ if (of_device_is_compatible(node, "amlogic,meson6-ir")) meson_ir_set_mask(ir, IR_DEC_REG1, REG1_MODE_MASK, DECODE_MODE_NEC << REG1_MODE_SHIFT); else meson_ir_set_mask(ir, IR_DEC_REG2, REG2_MODE_MASK, DECODE_MODE_NEC << REG2_MODE_SHIFT); /* Set rate to default value */ meson_ir_set_mask(ir, IR_DEC_REG0, REG0_RATE_MASK, 0x13); spin_unlock_irqrestore(&ir->lock, flags); } static const struct of_device_id meson_ir_match[] = { { .compatible = "amlogic,meson6-ir" }, { .compatible = "amlogic,meson8b-ir" }, { .compatible = "amlogic,meson-gxbb-ir" }, { }, }; MODULE_DEVICE_TABLE(of, meson_ir_match); static struct platform_driver meson_ir_driver = { .probe = meson_ir_probe, .remove_new = meson_ir_remove, .shutdown = meson_ir_shutdown, .driver = { .name = DRIVER_NAME, .of_match_table = meson_ir_match, }, }; module_platform_driver(meson_ir_driver); MODULE_DESCRIPTION("Amlogic Meson IR remote receiver driver"); MODULE_AUTHOR("Beniamino Galvani <b.galvani@gmail.com>"); MODULE_LICENSE("GPL v2");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1