Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Matti Vaittinen | 777 | 99.74% | 3 | 60.00% |
Uwe Kleine-König | 1 | 0.13% | 1 | 20.00% |
Julia Lawall | 1 | 0.13% | 1 | 20.00% |
Total | 779 | 5 |
// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2021 ROHM Semiconductors * * ROHM BD9576MUF and BD9573MUF PMIC driver */ #include <linux/i2c.h> #include <linux/interrupt.h> #include <linux/ioport.h> #include <linux/irq.h> #include <linux/mfd/core.h> #include <linux/mfd/rohm-bd957x.h> #include <linux/mfd/rohm-generic.h> #include <linux/module.h> #include <linux/of_device.h> #include <linux/regmap.h> #include <linux/types.h> enum { BD957X_REGULATOR_CELL, BD957X_WDT_CELL, }; /* * Due to the BD9576MUF nasty IRQ behaviour we don't always populate IRQs. * These will be added to regulator resources only if IRQ information for the * PMIC is populated in device-tree. */ static const struct resource bd9576_regulator_irqs[] = { DEFINE_RES_IRQ_NAMED(BD9576_INT_THERM, "bd9576-temp"), DEFINE_RES_IRQ_NAMED(BD9576_INT_OVD, "bd9576-ovd"), DEFINE_RES_IRQ_NAMED(BD9576_INT_UVD, "bd9576-uvd"), }; static struct mfd_cell bd9573_mfd_cells[] = { [BD957X_REGULATOR_CELL] = { .name = "bd9573-regulator", }, [BD957X_WDT_CELL] = { .name = "bd9576-wdt", }, }; static struct mfd_cell bd9576_mfd_cells[] = { [BD957X_REGULATOR_CELL] = { .name = "bd9576-regulator", }, [BD957X_WDT_CELL] = { .name = "bd9576-wdt", }, }; static const struct regmap_range volatile_ranges[] = { regmap_reg_range(BD957X_REG_SMRB_ASSERT, BD957X_REG_SMRB_ASSERT), regmap_reg_range(BD957X_REG_PMIC_INTERNAL_STAT, BD957X_REG_PMIC_INTERNAL_STAT), regmap_reg_range(BD957X_REG_INT_THERM_STAT, BD957X_REG_INT_THERM_STAT), regmap_reg_range(BD957X_REG_INT_OVP_STAT, BD957X_REG_INT_SYS_STAT), regmap_reg_range(BD957X_REG_INT_MAIN_STAT, BD957X_REG_INT_MAIN_STAT), }; static const struct regmap_access_table volatile_regs = { .yes_ranges = &volatile_ranges[0], .n_yes_ranges = ARRAY_SIZE(volatile_ranges), }; static struct regmap_config bd957x_regmap = { .reg_bits = 8, .val_bits = 8, .volatile_table = &volatile_regs, .max_register = BD957X_MAX_REGISTER, .cache_type = REGCACHE_RBTREE, }; static struct regmap_irq bd9576_irqs[] = { REGMAP_IRQ_REG(BD9576_INT_THERM, 0, BD957X_MASK_INT_MAIN_THERM), REGMAP_IRQ_REG(BD9576_INT_OVP, 0, BD957X_MASK_INT_MAIN_OVP), REGMAP_IRQ_REG(BD9576_INT_SCP, 0, BD957X_MASK_INT_MAIN_SCP), REGMAP_IRQ_REG(BD9576_INT_OCP, 0, BD957X_MASK_INT_MAIN_OCP), REGMAP_IRQ_REG(BD9576_INT_OVD, 0, BD957X_MASK_INT_MAIN_OVD), REGMAP_IRQ_REG(BD9576_INT_UVD, 0, BD957X_MASK_INT_MAIN_UVD), REGMAP_IRQ_REG(BD9576_INT_UVP, 0, BD957X_MASK_INT_MAIN_UVP), REGMAP_IRQ_REG(BD9576_INT_SYS, 0, BD957X_MASK_INT_MAIN_SYS), }; static struct regmap_irq_chip bd9576_irq_chip = { .name = "bd9576_irq", .irqs = &bd9576_irqs[0], .num_irqs = ARRAY_SIZE(bd9576_irqs), .status_base = BD957X_REG_INT_MAIN_STAT, .mask_base = BD957X_REG_INT_MAIN_MASK, .ack_base = BD957X_REG_INT_MAIN_STAT, .init_ack_masked = true, .num_regs = 1, .irq_reg_stride = 1, }; static int bd957x_i2c_probe(struct i2c_client *i2c) { int ret; struct regmap *regmap; struct mfd_cell *cells; int num_cells; unsigned long chip_type; struct irq_domain *domain; bool usable_irqs; chip_type = (unsigned long)of_device_get_match_data(&i2c->dev); switch (chip_type) { case ROHM_CHIP_TYPE_BD9576: cells = bd9576_mfd_cells; num_cells = ARRAY_SIZE(bd9576_mfd_cells); usable_irqs = !!i2c->irq; break; case ROHM_CHIP_TYPE_BD9573: cells = bd9573_mfd_cells; num_cells = ARRAY_SIZE(bd9573_mfd_cells); /* * BD9573 only supports fatal IRQs which we can not handle * because SoC is going to lose the power. */ usable_irqs = false; break; default: dev_err(&i2c->dev, "Unknown device type"); return -EINVAL; } regmap = devm_regmap_init_i2c(i2c, &bd957x_regmap); if (IS_ERR(regmap)) return dev_err_probe(&i2c->dev, PTR_ERR(regmap), "Failed to initialize Regmap\n"); /* * BD9576 behaves badly. It kepts IRQ line asserted for the whole * duration of detected HW condition (like over temperature). So we * don't require IRQ to be populated. * If IRQ information is not given, then we mask all IRQs and do not * provide IRQ resources to regulator driver - which then just omits * the notifiers. */ if (usable_irqs) { struct regmap_irq_chip_data *irq_data; struct mfd_cell *regulators; regulators = &bd9576_mfd_cells[BD957X_REGULATOR_CELL]; regulators->resources = bd9576_regulator_irqs; regulators->num_resources = ARRAY_SIZE(bd9576_regulator_irqs); ret = devm_regmap_add_irq_chip(&i2c->dev, regmap, i2c->irq, IRQF_ONESHOT, 0, &bd9576_irq_chip, &irq_data); if (ret) return dev_err_probe(&i2c->dev, ret, "Failed to add IRQ chip\n"); domain = regmap_irq_get_domain(irq_data); } else { ret = regmap_update_bits(regmap, BD957X_REG_INT_MAIN_MASK, BD957X_MASK_INT_ALL, BD957X_MASK_INT_ALL); if (ret) return ret; domain = NULL; } ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_AUTO, cells, num_cells, NULL, 0, domain); if (ret) dev_err_probe(&i2c->dev, ret, "Failed to create subdevices\n"); return ret; } static const struct of_device_id bd957x_of_match[] = { { .compatible = "rohm,bd9576", .data = (void *)ROHM_CHIP_TYPE_BD9576, }, { .compatible = "rohm,bd9573", .data = (void *)ROHM_CHIP_TYPE_BD9573, }, { }, }; MODULE_DEVICE_TABLE(of, bd957x_of_match); static struct i2c_driver bd957x_drv = { .driver = { .name = "rohm-bd957x", .of_match_table = bd957x_of_match, }, .probe = bd957x_i2c_probe, }; module_i2c_driver(bd957x_drv); MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>"); MODULE_DESCRIPTION("ROHM BD9576MUF and BD9573MUF Power Management IC driver"); MODULE_LICENSE("GPL");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1