Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Julien Panis | 1246 | 99.76% | 1 | 33.33% |
Dan Carpenter | 2 | 0.16% | 1 | 33.33% |
Uwe Kleine-König | 1 | 0.08% | 1 | 33.33% |
Total | 1249 | 3 |
// SPDX-License-Identifier: GPL-2.0 /* * I2C access driver for TI TPS6594/TPS6593/LP8764 PMICs * * Copyright (C) 2023 BayLibre Incorporated - https://www.baylibre.com/ */ #include <linux/crc8.h> #include <linux/i2c.h> #include <linux/module.h> #include <linux/mod_devicetable.h> #include <linux/of_device.h> #include <linux/regmap.h> #include <linux/mfd/tps6594.h> static bool enable_crc; module_param(enable_crc, bool, 0444); MODULE_PARM_DESC(enable_crc, "Enable CRC feature for I2C interface"); DECLARE_CRC8_TABLE(tps6594_i2c_crc_table); static int tps6594_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) { int ret = i2c_transfer(adap, msgs, num); if (ret == num) return 0; else if (ret < 0) return ret; else return -EIO; } static int tps6594_i2c_reg_read_with_crc(struct i2c_client *client, u8 page, u8 reg, u8 *val) { struct i2c_msg msgs[2]; u8 buf_rx[] = { 0, 0 }; /* I2C address = I2C base address + Page index */ const u8 addr = client->addr + page; /* * CRC is calculated from every bit included in the protocol * except the ACK bits from the target. Byte stream is: * - B0: (I2C_addr_7bits << 1) | WR_bit, with WR_bit = 0 * - B1: reg * - B2: (I2C_addr_7bits << 1) | RD_bit, with RD_bit = 1 * - B3: val * - B4: CRC from B0-B1-B2-B3 */ u8 crc_data[] = { addr << 1, reg, addr << 1 | 1, 0 }; int ret; /* Write register */ msgs[0].addr = addr; msgs[0].flags = 0; msgs[0].len = 1; msgs[0].buf = ® /* Read data and CRC */ msgs[1].addr = msgs[0].addr; msgs[1].flags = I2C_M_RD; msgs[1].len = 2; msgs[1].buf = buf_rx; ret = tps6594_i2c_transfer(client->adapter, msgs, 2); if (ret < 0) return ret; crc_data[sizeof(crc_data) - 1] = *val = buf_rx[0]; if (buf_rx[1] != crc8(tps6594_i2c_crc_table, crc_data, sizeof(crc_data), CRC8_INIT_VALUE)) return -EIO; return ret; } static int tps6594_i2c_reg_write_with_crc(struct i2c_client *client, u8 page, u8 reg, u8 val) { struct i2c_msg msg; u8 buf[] = { reg, val, 0 }; /* I2C address = I2C base address + Page index */ const u8 addr = client->addr + page; /* * CRC is calculated from every bit included in the protocol * except the ACK bits from the target. Byte stream is: * - B0: (I2C_addr_7bits << 1) | WR_bit, with WR_bit = 0 * - B1: reg * - B2: val * - B3: CRC from B0-B1-B2 */ const u8 crc_data[] = { addr << 1, reg, val }; /* Write register, data and CRC */ msg.addr = addr; msg.flags = client->flags & I2C_M_TEN; msg.len = sizeof(buf); msg.buf = buf; buf[msg.len - 1] = crc8(tps6594_i2c_crc_table, crc_data, sizeof(crc_data), CRC8_INIT_VALUE); return tps6594_i2c_transfer(client->adapter, &msg, 1); } static int tps6594_i2c_read(void *context, const void *reg_buf, size_t reg_size, void *val_buf, size_t val_size) { struct i2c_client *client = context; struct tps6594 *tps = i2c_get_clientdata(client); struct i2c_msg msgs[2]; const u8 *reg_bytes = reg_buf; u8 *val_bytes = val_buf; const u8 page = reg_bytes[1]; u8 reg = reg_bytes[0]; int ret = 0; int i; if (tps->use_crc) { /* * Auto-increment feature does not support CRC protocol. * Converts the bulk read operation into a series of single read operations. */ for (i = 0 ; ret == 0 && i < val_size ; i++) ret = tps6594_i2c_reg_read_with_crc(client, page, reg + i, val_bytes + i); return ret; } /* Write register: I2C address = I2C base address + Page index */ msgs[0].addr = client->addr + page; msgs[0].flags = 0; msgs[0].len = 1; msgs[0].buf = ® /* Read data */ msgs[1].addr = msgs[0].addr; msgs[1].flags = I2C_M_RD; msgs[1].len = val_size; msgs[1].buf = val_bytes; return tps6594_i2c_transfer(client->adapter, msgs, 2); } static int tps6594_i2c_write(void *context, const void *data, size_t count) { struct i2c_client *client = context; struct tps6594 *tps = i2c_get_clientdata(client); struct i2c_msg msg; const u8 *bytes = data; u8 *buf; const u8 page = bytes[1]; const u8 reg = bytes[0]; int ret = 0; int i; if (tps->use_crc) { /* * Auto-increment feature does not support CRC protocol. * Converts the bulk write operation into a series of single write operations. */ for (i = 0 ; ret == 0 && i < count - 2 ; i++) ret = tps6594_i2c_reg_write_with_crc(client, page, reg + i, bytes[i + 2]); return ret; } /* Setup buffer: page byte is not sent */ buf = kzalloc(--count, GFP_KERNEL); if (!buf) return -ENOMEM; buf[0] = reg; for (i = 0 ; i < count - 1 ; i++) buf[i + 1] = bytes[i + 2]; /* Write register and data: I2C address = I2C base address + Page index */ msg.addr = client->addr + page; msg.flags = client->flags & I2C_M_TEN; msg.len = count; msg.buf = buf; ret = tps6594_i2c_transfer(client->adapter, &msg, 1); kfree(buf); return ret; } static const struct regmap_config tps6594_i2c_regmap_config = { .reg_bits = 16, .val_bits = 8, .max_register = TPS6594_REG_DWD_FAIL_CNT_REG, .volatile_reg = tps6594_is_volatile_reg, .read = tps6594_i2c_read, .write = tps6594_i2c_write, }; static const struct of_device_id tps6594_i2c_of_match_table[] = { { .compatible = "ti,tps6594-q1", .data = (void *)TPS6594, }, { .compatible = "ti,tps6593-q1", .data = (void *)TPS6593, }, { .compatible = "ti,lp8764-q1", .data = (void *)LP8764, }, {} }; MODULE_DEVICE_TABLE(of, tps6594_i2c_of_match_table); static int tps6594_i2c_probe(struct i2c_client *client) { struct device *dev = &client->dev; struct tps6594 *tps; const struct of_device_id *match; tps = devm_kzalloc(dev, sizeof(*tps), GFP_KERNEL); if (!tps) return -ENOMEM; i2c_set_clientdata(client, tps); tps->dev = dev; tps->reg = client->addr; tps->irq = client->irq; tps->regmap = devm_regmap_init(dev, NULL, client, &tps6594_i2c_regmap_config); if (IS_ERR(tps->regmap)) return dev_err_probe(dev, PTR_ERR(tps->regmap), "Failed to init regmap\n"); match = of_match_device(tps6594_i2c_of_match_table, dev); if (!match) return dev_err_probe(dev, -EINVAL, "Failed to find matching chip ID\n"); tps->chip_id = (unsigned long)match->data; crc8_populate_msb(tps6594_i2c_crc_table, TPS6594_CRC8_POLYNOMIAL); return tps6594_device_init(tps, enable_crc); } static struct i2c_driver tps6594_i2c_driver = { .driver = { .name = "tps6594", .of_match_table = tps6594_i2c_of_match_table, }, .probe = tps6594_i2c_probe, }; module_i2c_driver(tps6594_i2c_driver); MODULE_AUTHOR("Julien Panis <jpanis@baylibre.com>"); MODULE_DESCRIPTION("TPS6594 I2C Interface Driver"); MODULE_LICENSE("GPL");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1