Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Jonathan Cameron | 1996 | 74.78% | 1 | 6.67% |
Lukas Wunner | 596 | 22.33% | 10 | 66.67% |
Li Ming | 67 | 2.51% | 1 | 6.67% |
Sebastian Andrzej Siewior | 7 | 0.26% | 1 | 6.67% |
Patrick Mochel | 2 | 0.07% | 1 | 6.67% |
Greg Kroah-Hartman | 1 | 0.04% | 1 | 6.67% |
Total | 2669 | 15 |
// SPDX-License-Identifier: GPL-2.0 /* * Data Object Exchange * PCIe r6.0, sec 6.30 DOE * * Copyright (C) 2021 Huawei * Jonathan Cameron <Jonathan.Cameron@huawei.com> * * Copyright (C) 2022 Intel Corporation * Ira Weiny <ira.weiny@intel.com> */ #define dev_fmt(fmt) "DOE: " fmt #include <linux/bitfield.h> #include <linux/delay.h> #include <linux/jiffies.h> #include <linux/mutex.h> #include <linux/pci.h> #include <linux/pci-doe.h> #include <linux/workqueue.h> #include "pci.h" #define PCI_DOE_PROTOCOL_DISCOVERY 0 /* Timeout of 1 second from 6.30.2 Operation, PCI Spec r6.0 */ #define PCI_DOE_TIMEOUT HZ #define PCI_DOE_POLL_INTERVAL (PCI_DOE_TIMEOUT / 128) #define PCI_DOE_FLAG_CANCEL 0 #define PCI_DOE_FLAG_DEAD 1 /* Max data object length is 2^18 dwords */ #define PCI_DOE_MAX_LENGTH (1 << 18) /** * struct pci_doe_mb - State for a single DOE mailbox * * This state is used to manage a single DOE mailbox capability. All fields * should be considered opaque to the consumers and the structure passed into * the helpers below after being created by pci_doe_create_mb(). * * @pdev: PCI device this mailbox belongs to * @cap_offset: Capability offset * @prots: Array of protocols supported (encoded as long values) * @wq: Wait queue for work item * @work_queue: Queue of pci_doe_work items * @flags: Bit array of PCI_DOE_FLAG_* flags */ struct pci_doe_mb { struct pci_dev *pdev; u16 cap_offset; struct xarray prots; wait_queue_head_t wq; struct workqueue_struct *work_queue; unsigned long flags; }; struct pci_doe_protocol { u16 vid; u8 type; }; /** * struct pci_doe_task - represents a single query/response * * @prot: DOE Protocol * @request_pl: The request payload * @request_pl_sz: Size of the request payload (bytes) * @response_pl: The response payload * @response_pl_sz: Size of the response payload (bytes) * @rv: Return value. Length of received response or error (bytes) * @complete: Called when task is complete * @private: Private data for the consumer * @work: Used internally by the mailbox * @doe_mb: Used internally by the mailbox */ struct pci_doe_task { struct pci_doe_protocol prot; const __le32 *request_pl; size_t request_pl_sz; __le32 *response_pl; size_t response_pl_sz; int rv; void (*complete)(struct pci_doe_task *task); void *private; /* initialized by pci_doe_submit_task() */ struct work_struct work; struct pci_doe_mb *doe_mb; }; static int pci_doe_wait(struct pci_doe_mb *doe_mb, unsigned long timeout) { if (wait_event_timeout(doe_mb->wq, test_bit(PCI_DOE_FLAG_CANCEL, &doe_mb->flags), timeout)) return -EIO; return 0; } static void pci_doe_write_ctrl(struct pci_doe_mb *doe_mb, u32 val) { struct pci_dev *pdev = doe_mb->pdev; int offset = doe_mb->cap_offset; pci_write_config_dword(pdev, offset + PCI_DOE_CTRL, val); } static int pci_doe_abort(struct pci_doe_mb *doe_mb) { struct pci_dev *pdev = doe_mb->pdev; int offset = doe_mb->cap_offset; unsigned long timeout_jiffies; pci_dbg(pdev, "[%x] Issuing Abort\n", offset); timeout_jiffies = jiffies + PCI_DOE_TIMEOUT; pci_doe_write_ctrl(doe_mb, PCI_DOE_CTRL_ABORT); do { int rc; u32 val; rc = pci_doe_wait(doe_mb, PCI_DOE_POLL_INTERVAL); if (rc) return rc; pci_read_config_dword(pdev, offset + PCI_DOE_STATUS, &val); /* Abort success! */ if (!FIELD_GET(PCI_DOE_STATUS_ERROR, val) && !FIELD_GET(PCI_DOE_STATUS_BUSY, val)) return 0; } while (!time_after(jiffies, timeout_jiffies)); /* Abort has timed out and the MB is dead */ pci_err(pdev, "[%x] ABORT timed out\n", offset); return -EIO; } static int pci_doe_send_req(struct pci_doe_mb *doe_mb, struct pci_doe_task *task) { struct pci_dev *pdev = doe_mb->pdev; int offset = doe_mb->cap_offset; size_t length, remainder; u32 val; int i; /* * Check the DOE busy bit is not set. If it is set, this could indicate * someone other than Linux (e.g. firmware) is using the mailbox. Note * it is expected that firmware and OS will negotiate access rights via * an, as yet to be defined, method. */ pci_read_config_dword(pdev, offset + PCI_DOE_STATUS, &val); if (FIELD_GET(PCI_DOE_STATUS_BUSY, val)) return -EBUSY; if (FIELD_GET(PCI_DOE_STATUS_ERROR, val)) return -EIO; /* Length is 2 DW of header + length of payload in DW */ length = 2 + DIV_ROUND_UP(task->request_pl_sz, sizeof(__le32)); if (length > PCI_DOE_MAX_LENGTH) return -EIO; if (length == PCI_DOE_MAX_LENGTH) length = 0; /* Write DOE Header */ val = FIELD_PREP(PCI_DOE_DATA_OBJECT_HEADER_1_VID, task->prot.vid) | FIELD_PREP(PCI_DOE_DATA_OBJECT_HEADER_1_TYPE, task->prot.type); pci_write_config_dword(pdev, offset + PCI_DOE_WRITE, val); pci_write_config_dword(pdev, offset + PCI_DOE_WRITE, FIELD_PREP(PCI_DOE_DATA_OBJECT_HEADER_2_LENGTH, length)); /* Write payload */ for (i = 0; i < task->request_pl_sz / sizeof(__le32); i++) pci_write_config_dword(pdev, offset + PCI_DOE_WRITE, le32_to_cpu(task->request_pl[i])); /* Write last payload dword */ remainder = task->request_pl_sz % sizeof(__le32); if (remainder) { val = 0; memcpy(&val, &task->request_pl[i], remainder); le32_to_cpus(&val); pci_write_config_dword(pdev, offset + PCI_DOE_WRITE, val); } pci_doe_write_ctrl(doe_mb, PCI_DOE_CTRL_GO); return 0; } static bool pci_doe_data_obj_ready(struct pci_doe_mb *doe_mb) { struct pci_dev *pdev = doe_mb->pdev; int offset = doe_mb->cap_offset; u32 val; pci_read_config_dword(pdev, offset + PCI_DOE_STATUS, &val); if (FIELD_GET(PCI_DOE_STATUS_DATA_OBJECT_READY, val)) return true; return false; } static int pci_doe_recv_resp(struct pci_doe_mb *doe_mb, struct pci_doe_task *task) { size_t length, payload_length, remainder, received; struct pci_dev *pdev = doe_mb->pdev; int offset = doe_mb->cap_offset; int i = 0; u32 val; /* Read the first dword to get the protocol */ pci_read_config_dword(pdev, offset + PCI_DOE_READ, &val); if ((FIELD_GET(PCI_DOE_DATA_OBJECT_HEADER_1_VID, val) != task->prot.vid) || (FIELD_GET(PCI_DOE_DATA_OBJECT_HEADER_1_TYPE, val) != task->prot.type)) { dev_err_ratelimited(&pdev->dev, "[%x] expected [VID, Protocol] = [%04x, %02x], got [%04x, %02x]\n", doe_mb->cap_offset, task->prot.vid, task->prot.type, FIELD_GET(PCI_DOE_DATA_OBJECT_HEADER_1_VID, val), FIELD_GET(PCI_DOE_DATA_OBJECT_HEADER_1_TYPE, val)); return -EIO; } pci_write_config_dword(pdev, offset + PCI_DOE_READ, 0); /* Read the second dword to get the length */ pci_read_config_dword(pdev, offset + PCI_DOE_READ, &val); pci_write_config_dword(pdev, offset + PCI_DOE_READ, 0); length = FIELD_GET(PCI_DOE_DATA_OBJECT_HEADER_2_LENGTH, val); /* A value of 0x0 indicates max data object length */ if (!length) length = PCI_DOE_MAX_LENGTH; if (length < 2) return -EIO; /* First 2 dwords have already been read */ length -= 2; received = task->response_pl_sz; payload_length = DIV_ROUND_UP(task->response_pl_sz, sizeof(__le32)); remainder = task->response_pl_sz % sizeof(__le32); /* remainder signifies number of data bytes in last payload dword */ if (!remainder) remainder = sizeof(__le32); if (length < payload_length) { received = length * sizeof(__le32); payload_length = length; remainder = sizeof(__le32); } if (payload_length) { /* Read all payload dwords except the last */ for (; i < payload_length - 1; i++) { pci_read_config_dword(pdev, offset + PCI_DOE_READ, &val); task->response_pl[i] = cpu_to_le32(val); pci_write_config_dword(pdev, offset + PCI_DOE_READ, 0); } /* Read last payload dword */ pci_read_config_dword(pdev, offset + PCI_DOE_READ, &val); cpu_to_le32s(&val); memcpy(&task->response_pl[i], &val, remainder); /* Prior to the last ack, ensure Data Object Ready */ if (!pci_doe_data_obj_ready(doe_mb)) return -EIO; pci_write_config_dword(pdev, offset + PCI_DOE_READ, 0); i++; } /* Flush excess length */ for (; i < length; i++) { pci_read_config_dword(pdev, offset + PCI_DOE_READ, &val); pci_write_config_dword(pdev, offset + PCI_DOE_READ, 0); } /* Final error check to pick up on any since Data Object Ready */ pci_read_config_dword(pdev, offset + PCI_DOE_STATUS, &val); if (FIELD_GET(PCI_DOE_STATUS_ERROR, val)) return -EIO; return received; } static void signal_task_complete(struct pci_doe_task *task, int rv) { task->rv = rv; task->complete(task); destroy_work_on_stack(&task->work); } static void signal_task_abort(struct pci_doe_task *task, int rv) { struct pci_doe_mb *doe_mb = task->doe_mb; struct pci_dev *pdev = doe_mb->pdev; if (pci_doe_abort(doe_mb)) { /* * If the device can't process an abort; set the mailbox dead * - no more submissions */ pci_err(pdev, "[%x] Abort failed marking mailbox dead\n", doe_mb->cap_offset); set_bit(PCI_DOE_FLAG_DEAD, &doe_mb->flags); } signal_task_complete(task, rv); } static void doe_statemachine_work(struct work_struct *work) { struct pci_doe_task *task = container_of(work, struct pci_doe_task, work); struct pci_doe_mb *doe_mb = task->doe_mb; struct pci_dev *pdev = doe_mb->pdev; int offset = doe_mb->cap_offset; unsigned long timeout_jiffies; u32 val; int rc; if (test_bit(PCI_DOE_FLAG_DEAD, &doe_mb->flags)) { signal_task_complete(task, -EIO); return; } /* Send request */ rc = pci_doe_send_req(doe_mb, task); if (rc) { /* * The specification does not provide any guidance on how to * resolve conflicting requests from other entities. * Furthermore, it is likely that busy will not be detected * most of the time. Flag any detection of status busy with an * error. */ if (rc == -EBUSY) dev_err_ratelimited(&pdev->dev, "[%x] busy detected; another entity is sending conflicting requests\n", offset); signal_task_abort(task, rc); return; } timeout_jiffies = jiffies + PCI_DOE_TIMEOUT; /* Poll for response */ retry_resp: pci_read_config_dword(pdev, offset + PCI_DOE_STATUS, &val); if (FIELD_GET(PCI_DOE_STATUS_ERROR, val)) { signal_task_abort(task, -EIO); return; } if (!FIELD_GET(PCI_DOE_STATUS_DATA_OBJECT_READY, val)) { if (time_after(jiffies, timeout_jiffies)) { signal_task_abort(task, -EIO); return; } rc = pci_doe_wait(doe_mb, PCI_DOE_POLL_INTERVAL); if (rc) { signal_task_abort(task, rc); return; } goto retry_resp; } rc = pci_doe_recv_resp(doe_mb, task); if (rc < 0) { signal_task_abort(task, rc); return; } signal_task_complete(task, rc); } static void pci_doe_task_complete(struct pci_doe_task *task) { complete(task->private); } static int pci_doe_discovery(struct pci_doe_mb *doe_mb, u8 *index, u16 *vid, u8 *protocol) { u32 request_pl = FIELD_PREP(PCI_DOE_DATA_OBJECT_DISC_REQ_3_INDEX, *index); __le32 request_pl_le = cpu_to_le32(request_pl); __le32 response_pl_le; u32 response_pl; int rc; rc = pci_doe(doe_mb, PCI_VENDOR_ID_PCI_SIG, PCI_DOE_PROTOCOL_DISCOVERY, &request_pl_le, sizeof(request_pl_le), &response_pl_le, sizeof(response_pl_le)); if (rc < 0) return rc; if (rc != sizeof(response_pl_le)) return -EIO; response_pl = le32_to_cpu(response_pl_le); *vid = FIELD_GET(PCI_DOE_DATA_OBJECT_DISC_RSP_3_VID, response_pl); *protocol = FIELD_GET(PCI_DOE_DATA_OBJECT_DISC_RSP_3_PROTOCOL, response_pl); *index = FIELD_GET(PCI_DOE_DATA_OBJECT_DISC_RSP_3_NEXT_INDEX, response_pl); return 0; } static void *pci_doe_xa_prot_entry(u16 vid, u8 prot) { return xa_mk_value((vid << 8) | prot); } static int pci_doe_cache_protocols(struct pci_doe_mb *doe_mb) { u8 index = 0; u8 xa_idx = 0; do { int rc; u16 vid; u8 prot; rc = pci_doe_discovery(doe_mb, &index, &vid, &prot); if (rc) return rc; pci_dbg(doe_mb->pdev, "[%x] Found protocol %d vid: %x prot: %x\n", doe_mb->cap_offset, xa_idx, vid, prot); rc = xa_insert(&doe_mb->prots, xa_idx++, pci_doe_xa_prot_entry(vid, prot), GFP_KERNEL); if (rc) return rc; } while (index); return 0; } static void pci_doe_cancel_tasks(struct pci_doe_mb *doe_mb) { /* Stop all pending work items from starting */ set_bit(PCI_DOE_FLAG_DEAD, &doe_mb->flags); /* Cancel an in progress work item, if necessary */ set_bit(PCI_DOE_FLAG_CANCEL, &doe_mb->flags); wake_up(&doe_mb->wq); } /** * pci_doe_create_mb() - Create a DOE mailbox object * * @pdev: PCI device to create the DOE mailbox for * @cap_offset: Offset of the DOE mailbox * * Create a single mailbox object to manage the mailbox protocol at the * cap_offset specified. * * RETURNS: created mailbox object on success * ERR_PTR(-errno) on failure */ static struct pci_doe_mb *pci_doe_create_mb(struct pci_dev *pdev, u16 cap_offset) { struct pci_doe_mb *doe_mb; int rc; doe_mb = kzalloc(sizeof(*doe_mb), GFP_KERNEL); if (!doe_mb) return ERR_PTR(-ENOMEM); doe_mb->pdev = pdev; doe_mb->cap_offset = cap_offset; init_waitqueue_head(&doe_mb->wq); xa_init(&doe_mb->prots); doe_mb->work_queue = alloc_ordered_workqueue("%s %s DOE [%x]", 0, dev_bus_name(&pdev->dev), pci_name(pdev), doe_mb->cap_offset); if (!doe_mb->work_queue) { pci_err(pdev, "[%x] failed to allocate work queue\n", doe_mb->cap_offset); rc = -ENOMEM; goto err_free; } /* Reset the mailbox by issuing an abort */ rc = pci_doe_abort(doe_mb); if (rc) { pci_err(pdev, "[%x] failed to reset mailbox with abort command : %d\n", doe_mb->cap_offset, rc); goto err_destroy_wq; } /* * The state machine and the mailbox should be in sync now; * Use the mailbox to query protocols. */ rc = pci_doe_cache_protocols(doe_mb); if (rc) { pci_err(pdev, "[%x] failed to cache protocols : %d\n", doe_mb->cap_offset, rc); goto err_cancel; } return doe_mb; err_cancel: pci_doe_cancel_tasks(doe_mb); xa_destroy(&doe_mb->prots); err_destroy_wq: destroy_workqueue(doe_mb->work_queue); err_free: kfree(doe_mb); return ERR_PTR(rc); } /** * pci_doe_destroy_mb() - Destroy a DOE mailbox object * * @doe_mb: DOE mailbox * * Destroy all internal data structures created for the DOE mailbox. */ static void pci_doe_destroy_mb(struct pci_doe_mb *doe_mb) { pci_doe_cancel_tasks(doe_mb); xa_destroy(&doe_mb->prots); destroy_workqueue(doe_mb->work_queue); kfree(doe_mb); } /** * pci_doe_supports_prot() - Return if the DOE instance supports the given * protocol * @doe_mb: DOE mailbox capability to query * @vid: Protocol Vendor ID * @type: Protocol type * * RETURNS: True if the DOE mailbox supports the protocol specified */ static bool pci_doe_supports_prot(struct pci_doe_mb *doe_mb, u16 vid, u8 type) { unsigned long index; void *entry; /* The discovery protocol must always be supported */ if (vid == PCI_VENDOR_ID_PCI_SIG && type == PCI_DOE_PROTOCOL_DISCOVERY) return true; xa_for_each(&doe_mb->prots, index, entry) if (entry == pci_doe_xa_prot_entry(vid, type)) return true; return false; } /** * pci_doe_submit_task() - Submit a task to be processed by the state machine * * @doe_mb: DOE mailbox capability to submit to * @task: task to be queued * * Submit a DOE task (request/response) to the DOE mailbox to be processed. * Returns upon queueing the task object. If the queue is full this function * will sleep until there is room in the queue. * * task->complete will be called when the state machine is done processing this * task. * * @task must be allocated on the stack. * * Excess data will be discarded. * * RETURNS: 0 when task has been successfully queued, -ERRNO on error */ static int pci_doe_submit_task(struct pci_doe_mb *doe_mb, struct pci_doe_task *task) { if (!pci_doe_supports_prot(doe_mb, task->prot.vid, task->prot.type)) return -EINVAL; if (test_bit(PCI_DOE_FLAG_DEAD, &doe_mb->flags)) return -EIO; task->doe_mb = doe_mb; INIT_WORK_ONSTACK(&task->work, doe_statemachine_work); queue_work(doe_mb->work_queue, &task->work); return 0; } /** * pci_doe() - Perform Data Object Exchange * * @doe_mb: DOE Mailbox * @vendor: Vendor ID * @type: Data Object Type * @request: Request payload * @request_sz: Size of request payload (bytes) * @response: Response payload * @response_sz: Size of response payload (bytes) * * Submit @request to @doe_mb and store the @response. * The DOE exchange is performed synchronously and may therefore sleep. * * Payloads are treated as opaque byte streams which are transmitted verbatim, * without byte-swapping. If payloads contain little-endian register values, * the caller is responsible for conversion with cpu_to_le32() / le32_to_cpu(). * * For convenience, arbitrary payload sizes are allowed even though PCIe r6.0 * sec 6.30.1 specifies the Data Object Header 2 "Length" in dwords. The last * (partial) dword is copied with byte granularity and padded with zeroes if * necessary. Callers are thus relieved of using dword-sized bounce buffers. * * RETURNS: Length of received response or negative errno. * Received data in excess of @response_sz is discarded. * The length may be smaller than @response_sz and the caller * is responsible for checking that. */ int pci_doe(struct pci_doe_mb *doe_mb, u16 vendor, u8 type, const void *request, size_t request_sz, void *response, size_t response_sz) { DECLARE_COMPLETION_ONSTACK(c); struct pci_doe_task task = { .prot.vid = vendor, .prot.type = type, .request_pl = request, .request_pl_sz = request_sz, .response_pl = response, .response_pl_sz = response_sz, .complete = pci_doe_task_complete, .private = &c, }; int rc; rc = pci_doe_submit_task(doe_mb, &task); if (rc) return rc; wait_for_completion(&c); return task.rv; } EXPORT_SYMBOL_GPL(pci_doe); /** * pci_find_doe_mailbox() - Find Data Object Exchange mailbox * * @pdev: PCI device * @vendor: Vendor ID * @type: Data Object Type * * Find first DOE mailbox of a PCI device which supports the given protocol. * * RETURNS: Pointer to the DOE mailbox or NULL if none was found. */ struct pci_doe_mb *pci_find_doe_mailbox(struct pci_dev *pdev, u16 vendor, u8 type) { struct pci_doe_mb *doe_mb; unsigned long index; xa_for_each(&pdev->doe_mbs, index, doe_mb) if (pci_doe_supports_prot(doe_mb, vendor, type)) return doe_mb; return NULL; } EXPORT_SYMBOL_GPL(pci_find_doe_mailbox); void pci_doe_init(struct pci_dev *pdev) { struct pci_doe_mb *doe_mb; u16 offset = 0; int rc; xa_init(&pdev->doe_mbs); while ((offset = pci_find_next_ext_capability(pdev, offset, PCI_EXT_CAP_ID_DOE))) { doe_mb = pci_doe_create_mb(pdev, offset); if (IS_ERR(doe_mb)) { pci_err(pdev, "[%x] failed to create mailbox: %ld\n", offset, PTR_ERR(doe_mb)); continue; } rc = xa_insert(&pdev->doe_mbs, offset, doe_mb, GFP_KERNEL); if (rc) { pci_err(pdev, "[%x] failed to insert mailbox: %d\n", offset, rc); pci_doe_destroy_mb(doe_mb); } } } void pci_doe_destroy(struct pci_dev *pdev) { struct pci_doe_mb *doe_mb; unsigned long index; xa_for_each(&pdev->doe_mbs, index, doe_mb) pci_doe_destroy_mb(doe_mb); xa_destroy(&pdev->doe_mbs); } void pci_doe_disconnected(struct pci_dev *pdev) { struct pci_doe_mb *doe_mb; unsigned long index; xa_for_each(&pdev->doe_mbs, index, doe_mb) pci_doe_cancel_tasks(doe_mb); }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1