Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Stephen Barber | 594 | 14.95% | 1 | 1.11% |
Tzung-Bi Shih | 587 | 14.77% | 22 | 24.44% |
Simon Glass | 439 | 11.05% | 3 | 3.33% |
Vic Yang | 386 | 9.71% | 1 | 1.11% |
Gwendal Grignou | 269 | 6.77% | 6 | 6.67% |
Javier Martinez Canillas | 242 | 6.09% | 3 | 3.33% |
Guenter Roeck | 230 | 5.79% | 2 | 2.22% |
Shawn Nematbakhsh | 179 | 4.50% | 2 | 2.22% |
Prashant Malani | 153 | 3.85% | 11 | 12.22% |
Andrew Bresticker | 126 | 3.17% | 3 | 3.33% |
Enrico Granata | 126 | 3.17% | 2 | 2.22% |
Bill Richardson | 97 | 2.44% | 5 | 5.56% |
Brian Norris | 94 | 2.37% | 5 | 5.56% |
Patryk Duda | 84 | 2.11% | 2 | 2.22% |
Enric Balletbò i Serra | 78 | 1.96% | 7 | 7.78% |
Neil Armstrong | 75 | 1.89% | 1 | 1.11% |
Vincent Palatin | 61 | 1.53% | 1 | 1.11% |
Evan Green | 31 | 0.78% | 1 | 1.11% |
Tomeu Vizoso | 28 | 0.70% | 1 | 1.11% |
Samuel Ortiz | 17 | 0.43% | 1 | 1.11% |
Raul E Rangel | 17 | 0.43% | 2 | 2.22% |
Stephen Boyd | 16 | 0.40% | 1 | 1.11% |
Evan Benn | 15 | 0.38% | 2 | 2.22% |
Joseph Lo | 13 | 0.33% | 1 | 1.11% |
Doug Anderson | 9 | 0.23% | 1 | 1.11% |
Thierry Escande | 4 | 0.10% | 1 | 1.11% |
Lee Jones | 3 | 0.08% | 1 | 1.11% |
Colin Ian King | 1 | 0.03% | 1 | 1.11% |
Total | 3974 | 90 |
// SPDX-License-Identifier: GPL-2.0 // ChromeOS EC communication protocol helper functions // // Copyright (C) 2015 Google, Inc #include <linux/delay.h> #include <linux/device.h> #include <linux/module.h> #include <linux/platform_data/cros_ec_commands.h> #include <linux/platform_data/cros_ec_proto.h> #include <linux/slab.h> #include <asm/unaligned.h> #include "cros_ec_trace.h" #define EC_COMMAND_RETRIES 50 static const int cros_ec_error_map[] = { [EC_RES_INVALID_COMMAND] = -EOPNOTSUPP, [EC_RES_ERROR] = -EIO, [EC_RES_INVALID_PARAM] = -EINVAL, [EC_RES_ACCESS_DENIED] = -EACCES, [EC_RES_INVALID_RESPONSE] = -EPROTO, [EC_RES_INVALID_VERSION] = -ENOPROTOOPT, [EC_RES_INVALID_CHECKSUM] = -EBADMSG, [EC_RES_IN_PROGRESS] = -EINPROGRESS, [EC_RES_UNAVAILABLE] = -ENODATA, [EC_RES_TIMEOUT] = -ETIMEDOUT, [EC_RES_OVERFLOW] = -EOVERFLOW, [EC_RES_INVALID_HEADER] = -EBADR, [EC_RES_REQUEST_TRUNCATED] = -EBADR, [EC_RES_RESPONSE_TOO_BIG] = -EFBIG, [EC_RES_BUS_ERROR] = -EFAULT, [EC_RES_BUSY] = -EBUSY, [EC_RES_INVALID_HEADER_VERSION] = -EBADMSG, [EC_RES_INVALID_HEADER_CRC] = -EBADMSG, [EC_RES_INVALID_DATA_CRC] = -EBADMSG, [EC_RES_DUP_UNAVAILABLE] = -ENODATA, }; static int cros_ec_map_error(uint32_t result) { int ret = 0; if (result != EC_RES_SUCCESS) { if (result < ARRAY_SIZE(cros_ec_error_map) && cros_ec_error_map[result]) ret = cros_ec_error_map[result]; else ret = -EPROTO; } return ret; } static int prepare_tx(struct cros_ec_device *ec_dev, struct cros_ec_command *msg) { struct ec_host_request *request; u8 *out; int i; u8 csum = 0; if (msg->outsize + sizeof(*request) > ec_dev->dout_size) return -EINVAL; out = ec_dev->dout; request = (struct ec_host_request *)out; request->struct_version = EC_HOST_REQUEST_VERSION; request->checksum = 0; request->command = msg->command; request->command_version = msg->version; request->reserved = 0; request->data_len = msg->outsize; for (i = 0; i < sizeof(*request); i++) csum += out[i]; /* Copy data and update checksum */ memcpy(out + sizeof(*request), msg->data, msg->outsize); for (i = 0; i < msg->outsize; i++) csum += msg->data[i]; request->checksum = -csum; return sizeof(*request) + msg->outsize; } static int prepare_tx_legacy(struct cros_ec_device *ec_dev, struct cros_ec_command *msg) { u8 *out; u8 csum; int i; if (msg->outsize > EC_PROTO2_MAX_PARAM_SIZE) return -EINVAL; out = ec_dev->dout; out[0] = EC_CMD_VERSION0 + msg->version; out[1] = msg->command; out[2] = msg->outsize; csum = out[0] + out[1] + out[2]; for (i = 0; i < msg->outsize; i++) csum += out[EC_MSG_TX_HEADER_BYTES + i] = msg->data[i]; out[EC_MSG_TX_HEADER_BYTES + msg->outsize] = csum; return EC_MSG_TX_PROTO_BYTES + msg->outsize; } static int cros_ec_xfer_command(struct cros_ec_device *ec_dev, struct cros_ec_command *msg) { int ret; int (*xfer_fxn)(struct cros_ec_device *ec, struct cros_ec_command *msg); if (ec_dev->proto_version > 2) xfer_fxn = ec_dev->pkt_xfer; else xfer_fxn = ec_dev->cmd_xfer; if (!xfer_fxn) { /* * This error can happen if a communication error happened and * the EC is trying to use protocol v2, on an underlying * communication mechanism that does not support v2. */ dev_err_once(ec_dev->dev, "missing EC transfer API, cannot send command\n"); return -EIO; } trace_cros_ec_request_start(msg); ret = (*xfer_fxn)(ec_dev, msg); trace_cros_ec_request_done(msg, ret); return ret; } static int cros_ec_wait_until_complete(struct cros_ec_device *ec_dev, uint32_t *result) { struct { struct cros_ec_command msg; struct ec_response_get_comms_status status; } __packed buf; struct cros_ec_command *msg = &buf.msg; struct ec_response_get_comms_status *status = &buf.status; int ret = 0, i; msg->version = 0; msg->command = EC_CMD_GET_COMMS_STATUS; msg->insize = sizeof(*status); msg->outsize = 0; /* Query the EC's status until it's no longer busy or we encounter an error. */ for (i = 0; i < EC_COMMAND_RETRIES; ++i) { usleep_range(10000, 11000); ret = cros_ec_xfer_command(ec_dev, msg); if (ret == -EAGAIN) continue; if (ret < 0) return ret; *result = msg->result; if (msg->result != EC_RES_SUCCESS) return ret; if (ret == 0) { ret = -EPROTO; break; } if (!(status->flags & EC_COMMS_STATUS_PROCESSING)) return ret; } if (i >= EC_COMMAND_RETRIES) ret = -EAGAIN; return ret; } static int cros_ec_send_command(struct cros_ec_device *ec_dev, struct cros_ec_command *msg) { int ret = cros_ec_xfer_command(ec_dev, msg); if (msg->result == EC_RES_IN_PROGRESS) ret = cros_ec_wait_until_complete(ec_dev, &msg->result); return ret; } /** * cros_ec_prepare_tx() - Prepare an outgoing message in the output buffer. * @ec_dev: Device to register. * @msg: Message to write. * * This is used by all ChromeOS EC drivers to prepare the outgoing message * according to different protocol versions. * * Return: number of prepared bytes on success or negative error code. */ int cros_ec_prepare_tx(struct cros_ec_device *ec_dev, struct cros_ec_command *msg) { if (ec_dev->proto_version > 2) return prepare_tx(ec_dev, msg); return prepare_tx_legacy(ec_dev, msg); } EXPORT_SYMBOL(cros_ec_prepare_tx); /** * cros_ec_check_result() - Check ec_msg->result. * @ec_dev: EC device. * @msg: Message to check. * * This is used by ChromeOS EC drivers to check the ec_msg->result for * EC_RES_IN_PROGRESS and to warn about them. * * The function should not check for furthermore error codes. Otherwise, * it would break the ABI. * * Return: -EAGAIN if ec_msg->result == EC_RES_IN_PROGRESS. Otherwise, 0. */ int cros_ec_check_result(struct cros_ec_device *ec_dev, struct cros_ec_command *msg) { switch (msg->result) { case EC_RES_SUCCESS: return 0; case EC_RES_IN_PROGRESS: dev_dbg(ec_dev->dev, "command 0x%02x in progress\n", msg->command); return -EAGAIN; default: dev_dbg(ec_dev->dev, "command 0x%02x returned %d\n", msg->command, msg->result); return 0; } } EXPORT_SYMBOL(cros_ec_check_result); /* * cros_ec_get_host_event_wake_mask * * Get the mask of host events that cause wake from suspend. * * @ec_dev: EC device to call * @msg: message structure to use * @mask: result when function returns 0. * * LOCKING: * the caller has ec_dev->lock mutex, or the caller knows there is * no other command in progress. */ static int cros_ec_get_host_event_wake_mask(struct cros_ec_device *ec_dev, uint32_t *mask) { struct cros_ec_command *msg; struct ec_response_host_event_mask *r; int ret, mapped; msg = kzalloc(sizeof(*msg) + sizeof(*r), GFP_KERNEL); if (!msg) return -ENOMEM; msg->command = EC_CMD_HOST_EVENT_GET_WAKE_MASK; msg->insize = sizeof(*r); ret = cros_ec_send_command(ec_dev, msg); if (ret < 0) goto exit; mapped = cros_ec_map_error(msg->result); if (mapped) { ret = mapped; goto exit; } if (ret == 0) { ret = -EPROTO; goto exit; } r = (struct ec_response_host_event_mask *)msg->data; *mask = r->mask; ret = 0; exit: kfree(msg); return ret; } static int cros_ec_get_proto_info(struct cros_ec_device *ec_dev, int devidx) { struct cros_ec_command *msg; struct ec_response_get_protocol_info *info; int ret, mapped; ec_dev->proto_version = 3; if (devidx > 0) ec_dev->max_passthru = 0; msg = kzalloc(sizeof(*msg) + sizeof(*info), GFP_KERNEL); if (!msg) return -ENOMEM; msg->command = EC_CMD_PASSTHRU_OFFSET(devidx) | EC_CMD_GET_PROTOCOL_INFO; msg->insize = sizeof(*info); ret = cros_ec_send_command(ec_dev, msg); /* * Send command once again when timeout occurred. * Fingerprint MCU (FPMCU) is restarted during system boot which * introduces small window in which FPMCU won't respond for any * messages sent by kernel. There is no need to wait before next * attempt because we waited at least EC_MSG_DEADLINE_MS. */ if (ret == -ETIMEDOUT) ret = cros_ec_send_command(ec_dev, msg); if (ret < 0) { dev_dbg(ec_dev->dev, "failed to check for EC[%d] protocol version: %d\n", devidx, ret); goto exit; } mapped = cros_ec_map_error(msg->result); if (mapped) { ret = mapped; goto exit; } if (ret == 0) { ret = -EPROTO; goto exit; } info = (struct ec_response_get_protocol_info *)msg->data; switch (devidx) { case CROS_EC_DEV_EC_INDEX: ec_dev->max_request = info->max_request_packet_size - sizeof(struct ec_host_request); ec_dev->max_response = info->max_response_packet_size - sizeof(struct ec_host_response); ec_dev->proto_version = min(EC_HOST_REQUEST_VERSION, fls(info->protocol_versions) - 1); ec_dev->din_size = info->max_response_packet_size + EC_MAX_RESPONSE_OVERHEAD; ec_dev->dout_size = info->max_request_packet_size + EC_MAX_REQUEST_OVERHEAD; dev_dbg(ec_dev->dev, "using proto v%u\n", ec_dev->proto_version); break; case CROS_EC_DEV_PD_INDEX: ec_dev->max_passthru = info->max_request_packet_size - sizeof(struct ec_host_request); dev_dbg(ec_dev->dev, "found PD chip\n"); break; default: dev_dbg(ec_dev->dev, "unknown passthru index: %d\n", devidx); break; } ret = 0; exit: kfree(msg); return ret; } static int cros_ec_get_proto_info_legacy(struct cros_ec_device *ec_dev) { struct cros_ec_command *msg; struct ec_params_hello *params; struct ec_response_hello *response; int ret, mapped; ec_dev->proto_version = 2; msg = kzalloc(sizeof(*msg) + max(sizeof(*params), sizeof(*response)), GFP_KERNEL); if (!msg) return -ENOMEM; msg->command = EC_CMD_HELLO; msg->insize = sizeof(*response); msg->outsize = sizeof(*params); params = (struct ec_params_hello *)msg->data; params->in_data = 0xa0b0c0d0; ret = cros_ec_send_command(ec_dev, msg); if (ret < 0) { dev_dbg(ec_dev->dev, "EC failed to respond to v2 hello: %d\n", ret); goto exit; } mapped = cros_ec_map_error(msg->result); if (mapped) { ret = mapped; dev_err(ec_dev->dev, "EC responded to v2 hello with error: %d\n", msg->result); goto exit; } if (ret == 0) { ret = -EPROTO; goto exit; } response = (struct ec_response_hello *)msg->data; if (response->out_data != 0xa1b2c3d4) { dev_err(ec_dev->dev, "EC responded to v2 hello with bad result: %u\n", response->out_data); ret = -EBADMSG; goto exit; } ec_dev->max_request = EC_PROTO2_MAX_PARAM_SIZE; ec_dev->max_response = EC_PROTO2_MAX_PARAM_SIZE; ec_dev->max_passthru = 0; ec_dev->pkt_xfer = NULL; ec_dev->din_size = EC_PROTO2_MSG_BYTES; ec_dev->dout_size = EC_PROTO2_MSG_BYTES; dev_dbg(ec_dev->dev, "falling back to proto v2\n"); ret = 0; exit: kfree(msg); return ret; } /* * cros_ec_get_host_command_version_mask * * Get the version mask of a given command. * * @ec_dev: EC device to call * @msg: message structure to use * @cmd: command to get the version of. * @mask: result when function returns 0. * * @return 0 on success, error code otherwise * * LOCKING: * the caller has ec_dev->lock mutex or the caller knows there is * no other command in progress. */ static int cros_ec_get_host_command_version_mask(struct cros_ec_device *ec_dev, u16 cmd, u32 *mask) { struct ec_params_get_cmd_versions *pver; struct ec_response_get_cmd_versions *rver; struct cros_ec_command *msg; int ret, mapped; msg = kmalloc(sizeof(*msg) + max(sizeof(*rver), sizeof(*pver)), GFP_KERNEL); if (!msg) return -ENOMEM; msg->version = 0; msg->command = EC_CMD_GET_CMD_VERSIONS; msg->insize = sizeof(*rver); msg->outsize = sizeof(*pver); pver = (struct ec_params_get_cmd_versions *)msg->data; pver->cmd = cmd; ret = cros_ec_send_command(ec_dev, msg); if (ret < 0) goto exit; mapped = cros_ec_map_error(msg->result); if (mapped) { ret = mapped; goto exit; } if (ret == 0) { ret = -EPROTO; goto exit; } rver = (struct ec_response_get_cmd_versions *)msg->data; *mask = rver->version_mask; ret = 0; exit: kfree(msg); return ret; } /** * cros_ec_query_all() - Query the protocol version supported by the * ChromeOS EC. * @ec_dev: Device to register. * * Return: 0 on success or negative error code. */ int cros_ec_query_all(struct cros_ec_device *ec_dev) { struct device *dev = ec_dev->dev; u32 ver_mask; int ret; /* First try sending with proto v3. */ if (!cros_ec_get_proto_info(ec_dev, CROS_EC_DEV_EC_INDEX)) { /* Check for PD. */ cros_ec_get_proto_info(ec_dev, CROS_EC_DEV_PD_INDEX); } else { /* Try querying with a v2 hello message. */ ret = cros_ec_get_proto_info_legacy(ec_dev); if (ret) { /* * It's possible for a test to occur too early when * the EC isn't listening. If this happens, we'll * test later when the first command is run. */ ec_dev->proto_version = EC_PROTO_VERSION_UNKNOWN; dev_dbg(ec_dev->dev, "EC query failed: %d\n", ret); return ret; } } devm_kfree(dev, ec_dev->din); devm_kfree(dev, ec_dev->dout); ec_dev->din = devm_kzalloc(dev, ec_dev->din_size, GFP_KERNEL); if (!ec_dev->din) { ret = -ENOMEM; goto exit; } ec_dev->dout = devm_kzalloc(dev, ec_dev->dout_size, GFP_KERNEL); if (!ec_dev->dout) { devm_kfree(dev, ec_dev->din); ret = -ENOMEM; goto exit; } /* Probe if MKBP event is supported */ ret = cros_ec_get_host_command_version_mask(ec_dev, EC_CMD_GET_NEXT_EVENT, &ver_mask); if (ret < 0 || ver_mask == 0) { ec_dev->mkbp_event_supported = 0; } else { ec_dev->mkbp_event_supported = fls(ver_mask); dev_dbg(ec_dev->dev, "MKBP support version %u\n", ec_dev->mkbp_event_supported - 1); } /* Probe if host sleep v1 is supported for S0ix failure detection. */ ret = cros_ec_get_host_command_version_mask(ec_dev, EC_CMD_HOST_SLEEP_EVENT, &ver_mask); ec_dev->host_sleep_v1 = (ret == 0 && (ver_mask & EC_VER_MASK(1))); /* Get host event wake mask. */ ret = cros_ec_get_host_event_wake_mask(ec_dev, &ec_dev->host_event_wake_mask); if (ret < 0) { /* * If the EC doesn't support EC_CMD_HOST_EVENT_GET_WAKE_MASK, * use a reasonable default. Note that we ignore various * battery, AC status, and power-state events, because (a) * those can be quite common (e.g., when sitting at full * charge, on AC) and (b) these are not actionable wake events; * if anything, we'd like to continue suspending (to save * power), not wake up. */ ec_dev->host_event_wake_mask = U32_MAX & ~(EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_CLOSED) | EC_HOST_EVENT_MASK(EC_HOST_EVENT_AC_DISCONNECTED) | EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY_LOW) | EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY_CRITICAL) | EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY) | EC_HOST_EVENT_MASK(EC_HOST_EVENT_PD_MCU) | EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY_STATUS)); /* * Old ECs may not support this command. Complain about all * other errors. */ if (ret != -EOPNOTSUPP) dev_err(ec_dev->dev, "failed to retrieve wake mask: %d\n", ret); } ret = 0; exit: return ret; } EXPORT_SYMBOL(cros_ec_query_all); /** * cros_ec_cmd_xfer() - Send a command to the ChromeOS EC. * @ec_dev: EC device. * @msg: Message to write. * * Call this to send a command to the ChromeOS EC. This should be used instead * of calling the EC's cmd_xfer() callback directly. This function does not * convert EC command execution error codes to Linux error codes. Most * in-kernel users will want to use cros_ec_cmd_xfer_status() instead since * that function implements the conversion. * * Return: * >0 - EC command was executed successfully. The return value is the number * of bytes returned by the EC (excluding the header). * =0 - EC communication was successful. EC command execution results are * reported in msg->result. The result will be EC_RES_SUCCESS if the * command was executed successfully or report an EC command execution * error. * <0 - EC communication error. Return value is the Linux error code. */ int cros_ec_cmd_xfer(struct cros_ec_device *ec_dev, struct cros_ec_command *msg) { int ret; mutex_lock(&ec_dev->lock); if (ec_dev->proto_version == EC_PROTO_VERSION_UNKNOWN) { ret = cros_ec_query_all(ec_dev); if (ret) { dev_err(ec_dev->dev, "EC version unknown and query failed; aborting command\n"); mutex_unlock(&ec_dev->lock); return ret; } } if (msg->insize > ec_dev->max_response) { dev_dbg(ec_dev->dev, "clamping message receive buffer\n"); msg->insize = ec_dev->max_response; } if (msg->command < EC_CMD_PASSTHRU_OFFSET(CROS_EC_DEV_PD_INDEX)) { if (msg->outsize > ec_dev->max_request) { dev_err(ec_dev->dev, "request of size %u is too big (max: %u)\n", msg->outsize, ec_dev->max_request); mutex_unlock(&ec_dev->lock); return -EMSGSIZE; } } else { if (msg->outsize > ec_dev->max_passthru) { dev_err(ec_dev->dev, "passthru rq of size %u is too big (max: %u)\n", msg->outsize, ec_dev->max_passthru); mutex_unlock(&ec_dev->lock); return -EMSGSIZE; } } ret = cros_ec_send_command(ec_dev, msg); mutex_unlock(&ec_dev->lock); return ret; } EXPORT_SYMBOL(cros_ec_cmd_xfer); /** * cros_ec_cmd_xfer_status() - Send a command to the ChromeOS EC. * @ec_dev: EC device. * @msg: Message to write. * * Call this to send a command to the ChromeOS EC. This should be used instead of calling the EC's * cmd_xfer() callback directly. It returns success status only if both the command was transmitted * successfully and the EC replied with success status. * * Return: * >=0 - The number of bytes transferred. * <0 - Linux error code */ int cros_ec_cmd_xfer_status(struct cros_ec_device *ec_dev, struct cros_ec_command *msg) { int ret, mapped; ret = cros_ec_cmd_xfer(ec_dev, msg); if (ret < 0) return ret; mapped = cros_ec_map_error(msg->result); if (mapped) { dev_dbg(ec_dev->dev, "Command result (err: %d [%d])\n", msg->result, mapped); ret = mapped; } return ret; } EXPORT_SYMBOL(cros_ec_cmd_xfer_status); static int get_next_event_xfer(struct cros_ec_device *ec_dev, struct cros_ec_command *msg, struct ec_response_get_next_event_v1 *event, int version, uint32_t size) { int ret; msg->version = version; msg->command = EC_CMD_GET_NEXT_EVENT; msg->insize = size; msg->outsize = 0; ret = cros_ec_cmd_xfer_status(ec_dev, msg); if (ret > 0) { ec_dev->event_size = ret - 1; ec_dev->event_data = *event; } return ret; } static int get_next_event(struct cros_ec_device *ec_dev) { struct { struct cros_ec_command msg; struct ec_response_get_next_event_v1 event; } __packed buf; struct cros_ec_command *msg = &buf.msg; struct ec_response_get_next_event_v1 *event = &buf.event; const int cmd_version = ec_dev->mkbp_event_supported - 1; memset(msg, 0, sizeof(*msg)); if (ec_dev->suspended) { dev_dbg(ec_dev->dev, "Device suspended.\n"); return -EHOSTDOWN; } if (cmd_version == 0) return get_next_event_xfer(ec_dev, msg, event, 0, sizeof(struct ec_response_get_next_event)); return get_next_event_xfer(ec_dev, msg, event, cmd_version, sizeof(struct ec_response_get_next_event_v1)); } static int get_keyboard_state_event(struct cros_ec_device *ec_dev) { u8 buffer[sizeof(struct cros_ec_command) + sizeof(ec_dev->event_data.data)]; struct cros_ec_command *msg = (struct cros_ec_command *)&buffer; msg->version = 0; msg->command = EC_CMD_MKBP_STATE; msg->insize = sizeof(ec_dev->event_data.data); msg->outsize = 0; ec_dev->event_size = cros_ec_cmd_xfer_status(ec_dev, msg); ec_dev->event_data.event_type = EC_MKBP_EVENT_KEY_MATRIX; memcpy(&ec_dev->event_data.data, msg->data, sizeof(ec_dev->event_data.data)); return ec_dev->event_size; } /** * cros_ec_get_next_event() - Fetch next event from the ChromeOS EC. * @ec_dev: Device to fetch event from. * @wake_event: Pointer to a bool set to true upon return if the event might be * treated as a wake event. Ignored if null. * @has_more_events: Pointer to bool set to true if more than one event is * pending. * Some EC will set this flag to indicate cros_ec_get_next_event() * can be called multiple times in a row. * It is an optimization to prevent issuing a EC command for * nothing or wait for another interrupt from the EC to process * the next message. * Ignored if null. * * Return: negative error code on errors; 0 for no data; or else number of * bytes received (i.e., an event was retrieved successfully). Event types are * written out to @ec_dev->event_data.event_type on success. */ int cros_ec_get_next_event(struct cros_ec_device *ec_dev, bool *wake_event, bool *has_more_events) { u8 event_type; u32 host_event; int ret; u32 ver_mask; /* * Default value for wake_event. * Wake up on keyboard event, wake up for spurious interrupt or link * error to the EC. */ if (wake_event) *wake_event = true; /* * Default value for has_more_events. * EC will raise another interrupt if AP does not process all events * anyway. */ if (has_more_events) *has_more_events = false; if (!ec_dev->mkbp_event_supported) return get_keyboard_state_event(ec_dev); ret = get_next_event(ec_dev); /* * -ENOPROTOOPT is returned when EC returns EC_RES_INVALID_VERSION. * This can occur when EC based device (e.g. Fingerprint MCU) jumps to * the RO image which doesn't support newer version of the command. In * this case we will attempt to update maximum supported version of the * EC_CMD_GET_NEXT_EVENT. */ if (ret == -ENOPROTOOPT) { dev_dbg(ec_dev->dev, "GET_NEXT_EVENT returned invalid version error.\n"); ret = cros_ec_get_host_command_version_mask(ec_dev, EC_CMD_GET_NEXT_EVENT, &ver_mask); if (ret < 0 || ver_mask == 0) /* * Do not change the MKBP supported version if we can't * obtain supported version correctly. Please note that * calling EC_CMD_GET_NEXT_EVENT returned * EC_RES_INVALID_VERSION which means that the command * is present. */ return -ENOPROTOOPT; ec_dev->mkbp_event_supported = fls(ver_mask); dev_dbg(ec_dev->dev, "MKBP support version changed to %u\n", ec_dev->mkbp_event_supported - 1); /* Try to get next event with new MKBP support version set. */ ret = get_next_event(ec_dev); } if (ret <= 0) return ret; if (has_more_events) *has_more_events = ec_dev->event_data.event_type & EC_MKBP_HAS_MORE_EVENTS; ec_dev->event_data.event_type &= EC_MKBP_EVENT_TYPE_MASK; if (wake_event) { event_type = ec_dev->event_data.event_type; host_event = cros_ec_get_host_event(ec_dev); /* * Sensor events need to be parsed by the sensor sub-device. * Defer them, and don't report the wakeup here. */ if (event_type == EC_MKBP_EVENT_SENSOR_FIFO) { *wake_event = false; } else if (host_event) { /* rtc_update_irq() already handles wakeup events. */ if (host_event & EC_HOST_EVENT_MASK(EC_HOST_EVENT_RTC)) *wake_event = false; /* Masked host-events should not count as wake events. */ if (!(host_event & ec_dev->host_event_wake_mask)) *wake_event = false; } } return ret; } EXPORT_SYMBOL(cros_ec_get_next_event); /** * cros_ec_get_host_event() - Return a mask of event set by the ChromeOS EC. * @ec_dev: Device to fetch event from. * * When MKBP is supported, when the EC raises an interrupt, we collect the * events raised and call the functions in the ec notifier. This function * is a helper to know which events are raised. * * Return: 0 on error or non-zero bitmask of one or more EC_HOST_EVENT_*. */ u32 cros_ec_get_host_event(struct cros_ec_device *ec_dev) { u32 host_event; if (!ec_dev->mkbp_event_supported) return 0; if (ec_dev->event_data.event_type != EC_MKBP_EVENT_HOST_EVENT) return 0; if (ec_dev->event_size != sizeof(host_event)) { dev_warn(ec_dev->dev, "Invalid host event size\n"); return 0; } host_event = get_unaligned_le32(&ec_dev->event_data.data.host_event); return host_event; } EXPORT_SYMBOL(cros_ec_get_host_event); /** * cros_ec_check_features() - Test for the presence of EC features * * @ec: EC device, does not have to be connected directly to the AP, * can be daisy chained through another device. * @feature: One of ec_feature_code bit. * * Call this function to test whether the ChromeOS EC supports a feature. * * Return: true if supported, false if not (or if an error was encountered). */ bool cros_ec_check_features(struct cros_ec_dev *ec, int feature) { struct ec_response_get_features *features = &ec->features; int ret; if (features->flags[0] == -1U && features->flags[1] == -1U) { /* features bitmap not read yet */ ret = cros_ec_cmd(ec->ec_dev, 0, EC_CMD_GET_FEATURES + ec->cmd_offset, NULL, 0, features, sizeof(*features)); if (ret < 0) { dev_warn(ec->dev, "cannot get EC features: %d\n", ret); memset(features, 0, sizeof(*features)); } dev_dbg(ec->dev, "EC features %08x %08x\n", features->flags[0], features->flags[1]); } return !!(features->flags[feature / 32] & EC_FEATURE_MASK_0(feature)); } EXPORT_SYMBOL_GPL(cros_ec_check_features); /** * cros_ec_get_sensor_count() - Return the number of MEMS sensors supported. * * @ec: EC device, does not have to be connected directly to the AP, * can be daisy chained through another device. * Return: < 0 in case of error. */ int cros_ec_get_sensor_count(struct cros_ec_dev *ec) { /* * Issue a command to get the number of sensor reported. * If not supported, check for legacy mode. */ int ret, sensor_count; struct ec_params_motion_sense *params; struct ec_response_motion_sense *resp; struct cros_ec_command *msg; struct cros_ec_device *ec_dev = ec->ec_dev; u8 status; msg = kzalloc(sizeof(*msg) + max(sizeof(*params), sizeof(*resp)), GFP_KERNEL); if (!msg) return -ENOMEM; msg->version = 1; msg->command = EC_CMD_MOTION_SENSE_CMD + ec->cmd_offset; msg->outsize = sizeof(*params); msg->insize = sizeof(*resp); params = (struct ec_params_motion_sense *)msg->data; params->cmd = MOTIONSENSE_CMD_DUMP; ret = cros_ec_cmd_xfer_status(ec->ec_dev, msg); if (ret < 0) { sensor_count = ret; } else { resp = (struct ec_response_motion_sense *)msg->data; sensor_count = resp->dump.sensor_count; } kfree(msg); /* * Check legacy mode: Let's find out if sensors are accessible * via LPC interface. */ if (sensor_count < 0 && ec->cmd_offset == 0 && ec_dev->cmd_readmem) { ret = ec_dev->cmd_readmem(ec_dev, EC_MEMMAP_ACC_STATUS, 1, &status); if (ret >= 0 && (status & EC_MEMMAP_ACC_STATUS_PRESENCE_BIT)) { /* * We have 2 sensors, one in the lid, one in the base. */ sensor_count = 2; } else { /* * EC uses LPC interface and no sensors are presented. */ sensor_count = 0; } } return sensor_count; } EXPORT_SYMBOL_GPL(cros_ec_get_sensor_count); /** * cros_ec_cmd - Send a command to the EC. * * @ec_dev: EC device * @version: EC command version * @command: EC command * @outdata: EC command output data * @outsize: Size of outdata * @indata: EC command input data * @insize: Size of indata * * Return: >= 0 on success, negative error number on failure. */ int cros_ec_cmd(struct cros_ec_device *ec_dev, unsigned int version, int command, void *outdata, size_t outsize, void *indata, size_t insize) { struct cros_ec_command *msg; int ret; msg = kzalloc(sizeof(*msg) + max(insize, outsize), GFP_KERNEL); if (!msg) return -ENOMEM; msg->version = version; msg->command = command; msg->outsize = outsize; msg->insize = insize; if (outsize) memcpy(msg->data, outdata, outsize); ret = cros_ec_cmd_xfer_status(ec_dev, msg); if (ret < 0) goto error; if (insize) memcpy(indata, msg->data, insize); error: kfree(msg); return ret; } EXPORT_SYMBOL_GPL(cros_ec_cmd);
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1