Contributors: 11
| Author |
Tokens |
Token Proportion |
Commits |
Commit Proportion |
| Hannes Reinecke |
534 |
58.11% |
4 |
19.05% |
| Michael Christie |
301 |
32.75% |
3 |
14.29% |
| Chandra Seetharaman |
36 |
3.92% |
2 |
9.52% |
| Christoph Hellwig |
33 |
3.59% |
5 |
23.81% |
| Gustavo A. R. Silva |
4 |
0.44% |
1 |
4.76% |
| Paul Gortmaker |
3 |
0.33% |
1 |
4.76% |
| Thomas Gleixner |
2 |
0.22% |
1 |
4.76% |
| Bart Van Assche |
2 |
0.22% |
1 |
4.76% |
| Linus Torvalds (pre-git) |
2 |
0.22% |
1 |
4.76% |
| Linus Torvalds |
1 |
0.11% |
1 |
4.76% |
| Hillf Danton |
1 |
0.11% |
1 |
4.76% |
| Total |
919 |
|
21 |
|
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Basic HP/COMPAQ MSA 1000 support. This is only needed if your HW cannot be
* upgraded.
*
* Copyright (C) 2006 Red Hat, Inc. All rights reserved.
* Copyright (C) 2006 Mike Christie
* Copyright (C) 2008 Hannes Reinecke <hare@suse.de>
*/
#include <linux/slab.h>
#include <linux/module.h>
#include <scsi/scsi.h>
#include <scsi/scsi_dbg.h>
#include <scsi/scsi_eh.h>
#include <scsi/scsi_dh.h>
#define HP_SW_NAME "hp_sw"
#define HP_SW_TIMEOUT (60 * HZ)
#define HP_SW_RETRIES 3
#define HP_SW_PATH_UNINITIALIZED -1
#define HP_SW_PATH_ACTIVE 0
#define HP_SW_PATH_PASSIVE 1
struct hp_sw_dh_data {
int path_state;
int retries;
int retry_cnt;
struct scsi_device *sdev;
};
static int hp_sw_start_stop(struct hp_sw_dh_data *);
/*
* tur_done - Handle TEST UNIT READY return status
* @sdev: sdev the command has been sent to
* @errors: blk error code
*
* Returns SCSI_DH_DEV_OFFLINED if the sdev is on the passive path
*/
static int tur_done(struct scsi_device *sdev, struct hp_sw_dh_data *h,
struct scsi_sense_hdr *sshdr)
{
int ret = SCSI_DH_IO;
switch (sshdr->sense_key) {
case UNIT_ATTENTION:
ret = SCSI_DH_IMM_RETRY;
break;
case NOT_READY:
if (sshdr->asc == 0x04 && sshdr->ascq == 2) {
/*
* LUN not ready - Initialization command required
*
* This is the passive path
*/
h->path_state = HP_SW_PATH_PASSIVE;
ret = SCSI_DH_OK;
break;
}
fallthrough;
default:
sdev_printk(KERN_WARNING, sdev,
"%s: sending tur failed, sense %x/%x/%x\n",
HP_SW_NAME, sshdr->sense_key, sshdr->asc,
sshdr->ascq);
break;
}
return ret;
}
/*
* hp_sw_tur - Send TEST UNIT READY
* @sdev: sdev command should be sent to
*
* Use the TEST UNIT READY command to determine
* the path state.
*/
static int hp_sw_tur(struct scsi_device *sdev, struct hp_sw_dh_data *h)
{
unsigned char cmd[6] = { TEST_UNIT_READY };
struct scsi_sense_hdr sshdr;
int ret = SCSI_DH_OK, res;
blk_opf_t opf = REQ_OP_DRV_IN | REQ_FAILFAST_DEV |
REQ_FAILFAST_TRANSPORT | REQ_FAILFAST_DRIVER;
const struct scsi_exec_args exec_args = {
.sshdr = &sshdr,
};
retry:
res = scsi_execute_cmd(sdev, cmd, opf, NULL, 0, HP_SW_TIMEOUT,
HP_SW_RETRIES, &exec_args);
if (res) {
if (scsi_sense_valid(&sshdr))
ret = tur_done(sdev, h, &sshdr);
else {
sdev_printk(KERN_WARNING, sdev,
"%s: sending tur failed with %x\n",
HP_SW_NAME, res);
ret = SCSI_DH_IO;
}
} else {
h->path_state = HP_SW_PATH_ACTIVE;
ret = SCSI_DH_OK;
}
if (ret == SCSI_DH_IMM_RETRY)
goto retry;
return ret;
}
/*
* hp_sw_start_stop - Send START STOP UNIT command
* @sdev: sdev command should be sent to
*
* Sending START STOP UNIT activates the SP.
*/
static int hp_sw_start_stop(struct hp_sw_dh_data *h)
{
unsigned char cmd[6] = { START_STOP, 0, 0, 0, 1, 0 };
struct scsi_sense_hdr sshdr;
struct scsi_device *sdev = h->sdev;
int res, rc = SCSI_DH_OK;
int retry_cnt = HP_SW_RETRIES;
blk_opf_t opf = REQ_OP_DRV_IN | REQ_FAILFAST_DEV |
REQ_FAILFAST_TRANSPORT | REQ_FAILFAST_DRIVER;
const struct scsi_exec_args exec_args = {
.sshdr = &sshdr,
};
retry:
res = scsi_execute_cmd(sdev, cmd, opf, NULL, 0, HP_SW_TIMEOUT,
HP_SW_RETRIES, &exec_args);
if (res) {
if (!scsi_sense_valid(&sshdr)) {
sdev_printk(KERN_WARNING, sdev,
"%s: sending start_stop_unit failed, "
"no sense available\n", HP_SW_NAME);
return SCSI_DH_IO;
}
switch (sshdr.sense_key) {
case NOT_READY:
if (sshdr.asc == 0x04 && sshdr.ascq == 3) {
/*
* LUN not ready - manual intervention required
*
* Switch-over in progress, retry.
*/
if (--retry_cnt)
goto retry;
rc = SCSI_DH_RETRY;
break;
}
fallthrough;
default:
sdev_printk(KERN_WARNING, sdev,
"%s: sending start_stop_unit failed, "
"sense %x/%x/%x\n", HP_SW_NAME,
sshdr.sense_key, sshdr.asc, sshdr.ascq);
rc = SCSI_DH_IO;
}
}
return rc;
}
static blk_status_t hp_sw_prep_fn(struct scsi_device *sdev, struct request *req)
{
struct hp_sw_dh_data *h = sdev->handler_data;
if (h->path_state != HP_SW_PATH_ACTIVE) {
req->rq_flags |= RQF_QUIET;
return BLK_STS_IOERR;
}
return BLK_STS_OK;
}
/*
* hp_sw_activate - Activate a path
* @sdev: sdev on the path to be activated
*
* The HP Active/Passive firmware is pretty simple;
* the passive path reports NOT READY with sense codes
* 0x04/0x02; a START STOP UNIT command will then
* activate the passive path (and deactivate the
* previously active one).
*/
static int hp_sw_activate(struct scsi_device *sdev,
activate_complete fn, void *data)
{
int ret = SCSI_DH_OK;
struct hp_sw_dh_data *h = sdev->handler_data;
ret = hp_sw_tur(sdev, h);
if (ret == SCSI_DH_OK && h->path_state == HP_SW_PATH_PASSIVE)
ret = hp_sw_start_stop(h);
if (fn)
fn(data, ret);
return 0;
}
static int hp_sw_bus_attach(struct scsi_device *sdev)
{
struct hp_sw_dh_data *h;
int ret;
h = kzalloc(sizeof(*h), GFP_KERNEL);
if (!h)
return SCSI_DH_NOMEM;
h->path_state = HP_SW_PATH_UNINITIALIZED;
h->retries = HP_SW_RETRIES;
h->sdev = sdev;
ret = hp_sw_tur(sdev, h);
if (ret != SCSI_DH_OK)
goto failed;
if (h->path_state == HP_SW_PATH_UNINITIALIZED) {
ret = SCSI_DH_NOSYS;
goto failed;
}
sdev_printk(KERN_INFO, sdev, "%s: attached to %s path\n",
HP_SW_NAME, h->path_state == HP_SW_PATH_ACTIVE?
"active":"passive");
sdev->handler_data = h;
return SCSI_DH_OK;
failed:
kfree(h);
return ret;
}
static void hp_sw_bus_detach( struct scsi_device *sdev )
{
kfree(sdev->handler_data);
sdev->handler_data = NULL;
}
static struct scsi_device_handler hp_sw_dh = {
.name = HP_SW_NAME,
.module = THIS_MODULE,
.attach = hp_sw_bus_attach,
.detach = hp_sw_bus_detach,
.activate = hp_sw_activate,
.prep_fn = hp_sw_prep_fn,
};
static int __init hp_sw_init(void)
{
return scsi_register_device_handler(&hp_sw_dh);
}
static void __exit hp_sw_exit(void)
{
scsi_unregister_device_handler(&hp_sw_dh);
}
module_init(hp_sw_init);
module_exit(hp_sw_exit);
MODULE_DESCRIPTION("HP Active/Passive driver");
MODULE_AUTHOR("Mike Christie <michaelc@cs.wisc.edu");
MODULE_LICENSE("GPL");