Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Mayulong | 1306 | 81.42% | 1 | 5.88% |
Mauro Carvalho Chehab | 248 | 15.46% | 10 | 58.82% |
Christophe Jaillet | 35 | 2.18% | 1 | 5.88% |
Dan Carpenter | 6 | 0.37% | 1 | 5.88% |
Yue haibing | 4 | 0.25% | 1 | 5.88% |
Juan Antonio Aldea-Armenteros | 2 | 0.12% | 1 | 5.88% |
Uwe Kleine-König | 2 | 0.12% | 1 | 5.88% |
Colin Ian King | 1 | 0.06% | 1 | 5.88% |
Total | 1604 | 17 |
// SPDX-License-Identifier: GPL-2.0 #include <linux/delay.h> #include <linux/err.h> #include <linux/interrupt.h> #include <linux/io.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/of.h> #include <linux/platform_device.h> #include <linux/seq_file.h> #include <linux/slab.h> #include <linux/spmi.h> /* * SPMI register addr */ #define SPMI_CHANNEL_OFFSET 0x0300 #define SPMI_SLAVE_OFFSET 0x20 #define SPMI_APB_SPMI_CMD_BASE_ADDR 0x0100 #define SPMI_APB_SPMI_WDATA0_BASE_ADDR 0x0104 #define SPMI_APB_SPMI_WDATA1_BASE_ADDR 0x0108 #define SPMI_APB_SPMI_WDATA2_BASE_ADDR 0x010c #define SPMI_APB_SPMI_WDATA3_BASE_ADDR 0x0110 #define SPMI_APB_SPMI_STATUS_BASE_ADDR 0x0200 #define SPMI_APB_SPMI_RDATA0_BASE_ADDR 0x0204 #define SPMI_APB_SPMI_RDATA1_BASE_ADDR 0x0208 #define SPMI_APB_SPMI_RDATA2_BASE_ADDR 0x020c #define SPMI_APB_SPMI_RDATA3_BASE_ADDR 0x0210 #define SPMI_PER_DATAREG_BYTE 4 /* * SPMI cmd register */ #define SPMI_APB_SPMI_CMD_EN BIT(31) #define SPMI_APB_SPMI_CMD_TYPE_OFFSET 24 #define SPMI_APB_SPMI_CMD_LENGTH_OFFSET 20 #define SPMI_APB_SPMI_CMD_SLAVEID_OFFSET 16 #define SPMI_APB_SPMI_CMD_ADDR_OFFSET 0 /* Command Opcodes */ enum spmi_controller_cmd_op_code { SPMI_CMD_REG_ZERO_WRITE = 0, SPMI_CMD_REG_WRITE = 1, SPMI_CMD_REG_READ = 2, SPMI_CMD_EXT_REG_WRITE = 3, SPMI_CMD_EXT_REG_READ = 4, SPMI_CMD_EXT_REG_WRITE_L = 5, SPMI_CMD_EXT_REG_READ_L = 6, SPMI_CMD_REG_RESET = 7, SPMI_CMD_REG_SLEEP = 8, SPMI_CMD_REG_SHUTDOWN = 9, SPMI_CMD_REG_WAKEUP = 10, }; /* * SPMI status register */ #define SPMI_APB_TRANS_DONE BIT(0) #define SPMI_APB_TRANS_FAIL BIT(2) /* Command register fields */ #define SPMI_CONTROLLER_CMD_MAX_BYTE_COUNT 16 /* Maximum number of support PMIC peripherals */ #define SPMI_CONTROLLER_TIMEOUT_US 1000 #define SPMI_CONTROLLER_MAX_TRANS_BYTES 16 struct spmi_controller_dev { struct spmi_controller *controller; struct device *dev; void __iomem *base; spinlock_t lock; u32 channel; }; static int spmi_controller_wait_for_done(struct device *dev, struct spmi_controller_dev *ctrl_dev, void __iomem *base, u8 sid, u16 addr) { u32 timeout = SPMI_CONTROLLER_TIMEOUT_US; u32 status, offset; offset = SPMI_APB_SPMI_STATUS_BASE_ADDR; offset += SPMI_CHANNEL_OFFSET * ctrl_dev->channel + SPMI_SLAVE_OFFSET * sid; do { status = readl(base + offset); if (status & SPMI_APB_TRANS_DONE) { if (status & SPMI_APB_TRANS_FAIL) { dev_err(dev, "%s: transaction failed (0x%x)\n", __func__, status); return -EIO; } dev_dbg(dev, "%s: status 0x%x\n", __func__, status); return 0; } udelay(1); } while (timeout--); dev_err(dev, "%s: timeout, status 0x%x\n", __func__, status); return -ETIMEDOUT; } static int spmi_read_cmd(struct spmi_controller *ctrl, u8 opc, u8 slave_id, u16 slave_addr, u8 *__buf, size_t bc) { struct spmi_controller_dev *spmi_controller = dev_get_drvdata(&ctrl->dev); u32 chnl_ofst = SPMI_CHANNEL_OFFSET * spmi_controller->channel; unsigned long flags; u8 *buf = __buf; u32 cmd, data; int rc; u8 op_code, i; if (bc > SPMI_CONTROLLER_MAX_TRANS_BYTES) { dev_err(&ctrl->dev, "spmi_controller supports 1..%d bytes per trans, but:%zu requested\n", SPMI_CONTROLLER_MAX_TRANS_BYTES, bc); return -EINVAL; } switch (opc) { case SPMI_CMD_READ: op_code = SPMI_CMD_REG_READ; break; case SPMI_CMD_EXT_READ: op_code = SPMI_CMD_EXT_REG_READ; break; case SPMI_CMD_EXT_READL: op_code = SPMI_CMD_EXT_REG_READ_L; break; default: dev_err(&ctrl->dev, "invalid read cmd 0x%x\n", opc); return -EINVAL; } cmd = SPMI_APB_SPMI_CMD_EN | (op_code << SPMI_APB_SPMI_CMD_TYPE_OFFSET) | ((bc - 1) << SPMI_APB_SPMI_CMD_LENGTH_OFFSET) | ((slave_id & 0xf) << SPMI_APB_SPMI_CMD_SLAVEID_OFFSET) | /* slvid */ ((slave_addr & 0xffff) << SPMI_APB_SPMI_CMD_ADDR_OFFSET); /* slave_addr */ spin_lock_irqsave(&spmi_controller->lock, flags); writel(cmd, spmi_controller->base + chnl_ofst + SPMI_APB_SPMI_CMD_BASE_ADDR); rc = spmi_controller_wait_for_done(&ctrl->dev, spmi_controller, spmi_controller->base, slave_id, slave_addr); if (rc) goto done; for (i = 0; bc > i * SPMI_PER_DATAREG_BYTE; i++) { data = readl(spmi_controller->base + chnl_ofst + SPMI_SLAVE_OFFSET * slave_id + SPMI_APB_SPMI_RDATA0_BASE_ADDR + i * SPMI_PER_DATAREG_BYTE); data = be32_to_cpu((__be32 __force)data); if ((bc - i * SPMI_PER_DATAREG_BYTE) >> 2) { memcpy(buf, &data, sizeof(data)); buf += sizeof(data); } else { memcpy(buf, &data, bc % SPMI_PER_DATAREG_BYTE); buf += (bc % SPMI_PER_DATAREG_BYTE); } } done: spin_unlock_irqrestore(&spmi_controller->lock, flags); if (rc) dev_err(&ctrl->dev, "spmi read wait timeout op:0x%x slave_id:%d slave_addr:0x%x bc:%zu\n", opc, slave_id, slave_addr, bc + 1); else dev_dbg(&ctrl->dev, "%s: id:%d slave_addr:0x%x, read value: %*ph\n", __func__, slave_id, slave_addr, (int)bc, __buf); return rc; } static int spmi_write_cmd(struct spmi_controller *ctrl, u8 opc, u8 slave_id, u16 slave_addr, const u8 *__buf, size_t bc) { struct spmi_controller_dev *spmi_controller = dev_get_drvdata(&ctrl->dev); u32 chnl_ofst = SPMI_CHANNEL_OFFSET * spmi_controller->channel; const u8 *buf = __buf; unsigned long flags; u32 cmd, data; int rc; u8 op_code, i; if (bc > SPMI_CONTROLLER_MAX_TRANS_BYTES) { dev_err(&ctrl->dev, "spmi_controller supports 1..%d bytes per trans, but:%zu requested\n", SPMI_CONTROLLER_MAX_TRANS_BYTES, bc); return -EINVAL; } switch (opc) { case SPMI_CMD_WRITE: op_code = SPMI_CMD_REG_WRITE; break; case SPMI_CMD_EXT_WRITE: op_code = SPMI_CMD_EXT_REG_WRITE; break; case SPMI_CMD_EXT_WRITEL: op_code = SPMI_CMD_EXT_REG_WRITE_L; break; default: dev_err(&ctrl->dev, "invalid write cmd 0x%x\n", opc); return -EINVAL; } cmd = SPMI_APB_SPMI_CMD_EN | (op_code << SPMI_APB_SPMI_CMD_TYPE_OFFSET) | ((bc - 1) << SPMI_APB_SPMI_CMD_LENGTH_OFFSET) | ((slave_id & 0xf) << SPMI_APB_SPMI_CMD_SLAVEID_OFFSET) | ((slave_addr & 0xffff) << SPMI_APB_SPMI_CMD_ADDR_OFFSET); /* Write data to FIFOs */ spin_lock_irqsave(&spmi_controller->lock, flags); for (i = 0; bc > i * SPMI_PER_DATAREG_BYTE; i++) { data = 0; if ((bc - i * SPMI_PER_DATAREG_BYTE) >> 2) { memcpy(&data, buf, sizeof(data)); buf += sizeof(data); } else { memcpy(&data, buf, bc % SPMI_PER_DATAREG_BYTE); buf += (bc % SPMI_PER_DATAREG_BYTE); } writel((u32 __force)cpu_to_be32(data), spmi_controller->base + chnl_ofst + SPMI_APB_SPMI_WDATA0_BASE_ADDR + SPMI_PER_DATAREG_BYTE * i); } /* Start the transaction */ writel(cmd, spmi_controller->base + chnl_ofst + SPMI_APB_SPMI_CMD_BASE_ADDR); rc = spmi_controller_wait_for_done(&ctrl->dev, spmi_controller, spmi_controller->base, slave_id, slave_addr); spin_unlock_irqrestore(&spmi_controller->lock, flags); if (rc) dev_err(&ctrl->dev, "spmi write wait timeout op:0x%x slave_id:%d slave_addr:0x%x bc:%zu\n", opc, slave_id, slave_addr, bc); else dev_dbg(&ctrl->dev, "%s: id:%d slave_addr:0x%x, wrote value: %*ph\n", __func__, slave_id, slave_addr, (int)bc, __buf); return rc; } static int spmi_controller_probe(struct platform_device *pdev) { struct spmi_controller_dev *spmi_controller; struct spmi_controller *ctrl; struct resource *iores; int ret; ctrl = spmi_controller_alloc(&pdev->dev, sizeof(*spmi_controller)); if (!ctrl) { dev_err(&pdev->dev, "can not allocate spmi_controller data\n"); return -ENOMEM; } spmi_controller = spmi_controller_get_drvdata(ctrl); spmi_controller->controller = ctrl; iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!iores) { dev_err(&pdev->dev, "can not get resource!\n"); ret = -EINVAL; goto err_put_controller; } spmi_controller->base = devm_ioremap(&pdev->dev, iores->start, resource_size(iores)); if (!spmi_controller->base) { dev_err(&pdev->dev, "can not remap base addr!\n"); ret = -EADDRNOTAVAIL; goto err_put_controller; } ret = of_property_read_u32(pdev->dev.of_node, "hisilicon,spmi-channel", &spmi_controller->channel); if (ret) { dev_err(&pdev->dev, "can not get channel\n"); ret = -ENODEV; goto err_put_controller; } platform_set_drvdata(pdev, spmi_controller); dev_set_drvdata(&ctrl->dev, spmi_controller); spin_lock_init(&spmi_controller->lock); ctrl->nr = spmi_controller->channel; ctrl->dev.parent = pdev->dev.parent; ctrl->dev.of_node = of_node_get(pdev->dev.of_node); /* Callbacks */ ctrl->read_cmd = spmi_read_cmd; ctrl->write_cmd = spmi_write_cmd; ret = spmi_controller_add(ctrl); if (ret) { dev_err(&pdev->dev, "spmi_controller_add failed with error %d!\n", ret); goto err_put_controller; } return 0; err_put_controller: spmi_controller_put(ctrl); return ret; } static void spmi_del_controller(struct platform_device *pdev) { struct spmi_controller *ctrl = platform_get_drvdata(pdev); spmi_controller_remove(ctrl); spmi_controller_put(ctrl); } static const struct of_device_id spmi_controller_match_table[] = { { .compatible = "hisilicon,kirin970-spmi-controller", }, {} }; MODULE_DEVICE_TABLE(of, spmi_controller_match_table); static struct platform_driver spmi_controller_driver = { .probe = spmi_controller_probe, .remove_new = spmi_del_controller, .driver = { .name = "hisi_spmi_controller", .of_match_table = spmi_controller_match_table, }, }; static int __init spmi_controller_init(void) { return platform_driver_register(&spmi_controller_driver); } postcore_initcall(spmi_controller_init); static void __exit spmi_controller_exit(void) { platform_driver_unregister(&spmi_controller_driver); } module_exit(spmi_controller_exit); MODULE_LICENSE("GPL v2"); MODULE_VERSION("1.0"); MODULE_ALIAS("platform:spmi_controller");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1