Contributors: 29
| Author |
Tokens |
Token Proportion |
Commits |
Commit Proportion |
| Ben Dooks |
1265 |
72.70% |
7 |
14.00% |
| Jingoo Han |
170 |
9.77% |
5 |
10.00% |
| Manjunath Goudar |
89 |
5.11% |
4 |
8.00% |
| Linus Torvalds |
43 |
2.47% |
2 |
4.00% |
| Sergio Prado |
32 |
1.84% |
1 |
2.00% |
| Rob Herring |
27 |
1.55% |
1 |
2.00% |
| Deepak Saxena |
15 |
0.86% |
1 |
2.00% |
| Russell King |
13 |
0.75% |
2 |
4.00% |
| Randy Dunlap |
9 |
0.52% |
1 |
2.00% |
| Thierry Reding |
9 |
0.52% |
1 |
2.00% |
| Kay Sievers |
8 |
0.46% |
2 |
4.00% |
| David Brownell |
6 |
0.34% |
2 |
4.00% |
| Greg Kroah-Hartman |
6 |
0.34% |
2 |
4.00% |
| Aleksey Gorelov |
5 |
0.29% |
1 |
2.00% |
| Alan Stern |
5 |
0.29% |
1 |
2.00% |
| Linus Torvalds (pre-git) |
5 |
0.29% |
3 |
6.00% |
| Tomasz Figa |
4 |
0.23% |
1 |
2.00% |
| Sylvain Munaut |
4 |
0.23% |
1 |
2.00% |
| Florian Fainelli |
3 |
0.17% |
1 |
2.00% |
| Eric Lescouet |
3 |
0.17% |
1 |
2.00% |
| Laurent Pinchart |
3 |
0.17% |
1 |
2.00% |
| Uwe Kleine-König |
3 |
0.17% |
2 |
4.00% |
| Peter Chen |
3 |
0.17% |
1 |
2.00% |
| Sebastian Andrzej Siewior |
3 |
0.17% |
1 |
2.00% |
| Sergei Shtylyov |
2 |
0.11% |
1 |
2.00% |
| Ahmed S. Darwish |
2 |
0.11% |
1 |
2.00% |
| Arnd Bergmann |
1 |
0.06% |
1 |
2.00% |
| Yong Zhang |
1 |
0.06% |
1 |
2.00% |
| Alexey Dobriyan |
1 |
0.06% |
1 |
2.00% |
| Total |
1740 |
|
50 |
|
// SPDX-License-Identifier: GPL-1.0+
/*
* OHCI HCD (Host Controller Driver) for USB.
*
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
* (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
* (C) Copyright 2002 Hewlett-Packard Company
*
* USB Bus Glue for Samsung S3C2410
*
* Written by Christopher Hoover <ch@hpl.hp.com>
* Based on fragments of previous driver by Russell King et al.
*
* Modified for S3C2410 from ohci-sa1111.c, ohci-omap.c and ohci-lh7a40.c
* by Ben Dooks, <ben@simtec.co.uk>
* Copyright (C) 2004 Simtec Electronics
*
* Thanks to basprog@mail.ru for updates to newer kernels
*
* This file is licenced under the GPL.
*/
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/platform_data/usb-ohci-s3c2410.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>
#include "ohci.h"
#define valid_port(idx) ((idx) == 1 || (idx) == 2)
/* clock device associated with the hcd */
#define DRIVER_DESC "OHCI S3C2410 driver"
static struct clk *clk;
static struct clk *usb_clk;
static struct hc_driver __read_mostly ohci_s3c2410_hc_driver;
/* forward definitions */
static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc);
/* conversion functions */
static struct s3c2410_hcd_info *to_s3c2410_info(struct usb_hcd *hcd)
{
return dev_get_platdata(hcd->self.controller);
}
static void s3c2410_start_hc(struct platform_device *dev, struct usb_hcd *hcd)
{
struct s3c2410_hcd_info *info = dev_get_platdata(&dev->dev);
dev_dbg(&dev->dev, "s3c2410_start_hc:\n");
clk_prepare_enable(usb_clk);
mdelay(2); /* let the bus clock stabilise */
clk_prepare_enable(clk);
if (info != NULL) {
info->hcd = hcd;
info->report_oc = s3c2410_hcd_oc;
if (info->enable_oc != NULL)
(info->enable_oc)(info, 1);
}
}
static void s3c2410_stop_hc(struct platform_device *dev)
{
struct s3c2410_hcd_info *info = dev_get_platdata(&dev->dev);
dev_dbg(&dev->dev, "s3c2410_stop_hc:\n");
if (info != NULL) {
info->report_oc = NULL;
info->hcd = NULL;
if (info->enable_oc != NULL)
(info->enable_oc)(info, 0);
}
clk_disable_unprepare(clk);
clk_disable_unprepare(usb_clk);
}
/* ohci_s3c2410_hub_status_data
*
* update the status data from the hub with anything that
* has been detected by our system
*/
static int
ohci_s3c2410_hub_status_data(struct usb_hcd *hcd, char *buf)
{
struct s3c2410_hcd_info *info = to_s3c2410_info(hcd);
struct s3c2410_hcd_port *port;
int orig;
int portno;
orig = ohci_hub_status_data(hcd, buf);
if (info == NULL)
return orig;
port = &info->port[0];
/* mark any changed port as changed */
for (portno = 0; portno < 2; port++, portno++) {
if (port->oc_changed == 1 &&
port->flags & S3C_HCDFLG_USED) {
dev_dbg(hcd->self.controller,
"oc change on port %d\n", portno);
if (orig < 1)
orig = 1;
buf[0] |= 1<<(portno+1);
}
}
return orig;
}
/* s3c2410_usb_set_power
*
* configure the power on a port, by calling the platform device
* routine registered with the platform device
*/
static void s3c2410_usb_set_power(struct s3c2410_hcd_info *info,
int port, int to)
{
if (info == NULL)
return;
if (info->power_control != NULL) {
info->port[port-1].power = to;
(info->power_control)(port-1, to);
}
}
/* ohci_s3c2410_hub_control
*
* look at control requests to the hub, and see if we need
* to take any action or over-ride the results from the
* request.
*/
static int ohci_s3c2410_hub_control(
struct usb_hcd *hcd,
u16 typeReq,
u16 wValue,
u16 wIndex,
char *buf,
u16 wLength)
{
struct s3c2410_hcd_info *info = to_s3c2410_info(hcd);
struct usb_hub_descriptor *desc;
int ret = -EINVAL;
u32 *data = (u32 *)buf;
dev_dbg(hcd->self.controller,
"s3c2410_hub_control(%p,0x%04x,0x%04x,0x%04x,%p,%04x)\n",
hcd, typeReq, wValue, wIndex, buf, wLength);
/* if we are only an humble host without any special capabilities
* process the request straight away and exit */
if (info == NULL) {
ret = ohci_hub_control(hcd, typeReq, wValue,
wIndex, buf, wLength);
goto out;
}
/* check the request to see if it needs handling */
switch (typeReq) {
case SetPortFeature:
if (wValue == USB_PORT_FEAT_POWER) {
dev_dbg(hcd->self.controller, "SetPortFeat: POWER\n");
s3c2410_usb_set_power(info, wIndex, 1);
goto out;
}
break;
case ClearPortFeature:
switch (wValue) {
case USB_PORT_FEAT_C_OVER_CURRENT:
dev_dbg(hcd->self.controller,
"ClearPortFeature: C_OVER_CURRENT\n");
if (valid_port(wIndex)) {
info->port[wIndex-1].oc_changed = 0;
info->port[wIndex-1].oc_status = 0;
}
goto out;
case USB_PORT_FEAT_OVER_CURRENT:
dev_dbg(hcd->self.controller,
"ClearPortFeature: OVER_CURRENT\n");
if (valid_port(wIndex))
info->port[wIndex-1].oc_status = 0;
goto out;
case USB_PORT_FEAT_POWER:
dev_dbg(hcd->self.controller,
"ClearPortFeature: POWER\n");
if (valid_port(wIndex)) {
s3c2410_usb_set_power(info, wIndex, 0);
return 0;
}
}
break;
}
ret = ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
if (ret)
goto out;
switch (typeReq) {
case GetHubDescriptor:
/* update the hub's descriptor */
desc = (struct usb_hub_descriptor *)buf;
if (info->power_control == NULL)
return ret;
dev_dbg(hcd->self.controller, "wHubCharacteristics 0x%04x\n",
desc->wHubCharacteristics);
/* remove the old configurations for power-switching, and
* over-current protection, and insert our new configuration
*/
desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_LPSM);
desc->wHubCharacteristics |= cpu_to_le16(
HUB_CHAR_INDV_PORT_LPSM);
if (info->enable_oc) {
desc->wHubCharacteristics &= ~cpu_to_le16(
HUB_CHAR_OCPM);
desc->wHubCharacteristics |= cpu_to_le16(
HUB_CHAR_INDV_PORT_OCPM);
}
dev_dbg(hcd->self.controller, "wHubCharacteristics after 0x%04x\n",
desc->wHubCharacteristics);
return ret;
case GetPortStatus:
/* check port status */
dev_dbg(hcd->self.controller, "GetPortStatus(%d)\n", wIndex);
if (valid_port(wIndex)) {
if (info->port[wIndex-1].oc_changed)
*data |= cpu_to_le32(RH_PS_OCIC);
if (info->port[wIndex-1].oc_status)
*data |= cpu_to_le32(RH_PS_POCI);
}
}
out:
return ret;
}
/* s3c2410_hcd_oc
*
* handle an over-current report
*/
static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc)
{
struct s3c2410_hcd_port *port;
unsigned long flags;
int portno;
if (info == NULL)
return;
port = &info->port[0];
local_irq_save(flags);
for (portno = 0; portno < 2; port++, portno++) {
if (port_oc & (1<<portno) &&
port->flags & S3C_HCDFLG_USED) {
port->oc_status = 1;
port->oc_changed = 1;
/* ok, once over-current is detected,
the port needs to be powered down */
s3c2410_usb_set_power(info, portno+1, 0);
}
}
local_irq_restore(flags);
}
/* may be called without controller electrically present */
/* may be called with controller, bus, and devices active */
/*
* ohci_hcd_s3c2410_remove - shutdown processing for HCD
* @dev: USB Host Controller being removed
*
* Context: task context, might sleep
*
* Reverses the effect of ohci_hcd_3c2410_probe(), first invoking
* the HCD's stop() method. It is always called from a thread
* context, normally "rmmod", "apmd", or something similar.
*/
static void
ohci_hcd_s3c2410_remove(struct platform_device *dev)
{
struct usb_hcd *hcd = platform_get_drvdata(dev);
usb_remove_hcd(hcd);
s3c2410_stop_hc(dev);
usb_put_hcd(hcd);
}
/*
* ohci_hcd_s3c2410_probe - initialize S3C2410-based HCDs
* @dev: USB Host Controller to be probed
*
* Context: task context, might sleep
*
* Allocates basic resources for this USB host controller, and
* then invokes the start() method for the HCD associated with it
* through the hotplug entry's driver_data.
*/
static int ohci_hcd_s3c2410_probe(struct platform_device *dev)
{
struct usb_hcd *hcd = NULL;
struct s3c2410_hcd_info *info = dev_get_platdata(&dev->dev);
int retval, irq;
s3c2410_usb_set_power(info, 1, 1);
s3c2410_usb_set_power(info, 2, 1);
hcd = usb_create_hcd(&ohci_s3c2410_hc_driver, &dev->dev, "s3c24xx");
if (hcd == NULL)
return -ENOMEM;
hcd->rsrc_start = dev->resource[0].start;
hcd->rsrc_len = resource_size(&dev->resource[0]);
hcd->regs = devm_ioremap_resource(&dev->dev, &dev->resource[0]);
if (IS_ERR(hcd->regs)) {
retval = PTR_ERR(hcd->regs);
goto err_put;
}
clk = devm_clk_get(&dev->dev, "usb-host");
if (IS_ERR(clk)) {
dev_err(&dev->dev, "cannot get usb-host clock\n");
retval = PTR_ERR(clk);
goto err_put;
}
usb_clk = devm_clk_get(&dev->dev, "usb-bus-host");
if (IS_ERR(usb_clk)) {
dev_err(&dev->dev, "cannot get usb-bus-host clock\n");
retval = PTR_ERR(usb_clk);
goto err_put;
}
irq = platform_get_irq(dev, 0);
if (irq < 0) {
retval = irq;
goto err_put;
}
s3c2410_start_hc(dev, hcd);
retval = usb_add_hcd(hcd, irq, 0);
if (retval != 0)
goto err_ioremap;
device_wakeup_enable(hcd->self.controller);
return 0;
err_ioremap:
s3c2410_stop_hc(dev);
err_put:
usb_put_hcd(hcd);
return retval;
}
/*-------------------------------------------------------------------------*/
#ifdef CONFIG_PM
static int ohci_hcd_s3c2410_drv_suspend(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct platform_device *pdev = to_platform_device(dev);
bool do_wakeup = device_may_wakeup(dev);
int rc = 0;
rc = ohci_suspend(hcd, do_wakeup);
if (rc)
return rc;
s3c2410_stop_hc(pdev);
return rc;
}
static int ohci_hcd_s3c2410_drv_resume(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct platform_device *pdev = to_platform_device(dev);
s3c2410_start_hc(pdev, hcd);
ohci_resume(hcd, false);
return 0;
}
#else
#define ohci_hcd_s3c2410_drv_suspend NULL
#define ohci_hcd_s3c2410_drv_resume NULL
#endif
static const struct dev_pm_ops ohci_hcd_s3c2410_pm_ops = {
.suspend = ohci_hcd_s3c2410_drv_suspend,
.resume = ohci_hcd_s3c2410_drv_resume,
};
static const struct of_device_id ohci_hcd_s3c2410_dt_ids[] = {
{ .compatible = "samsung,s3c2410-ohci" },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, ohci_hcd_s3c2410_dt_ids);
static struct platform_driver ohci_hcd_s3c2410_driver = {
.probe = ohci_hcd_s3c2410_probe,
.remove_new = ohci_hcd_s3c2410_remove,
.shutdown = usb_hcd_platform_shutdown,
.driver = {
.name = "s3c2410-ohci",
.pm = &ohci_hcd_s3c2410_pm_ops,
.of_match_table = ohci_hcd_s3c2410_dt_ids,
},
};
static int __init ohci_s3c2410_init(void)
{
if (usb_disabled())
return -ENODEV;
ohci_init_driver(&ohci_s3c2410_hc_driver, NULL);
/*
* The Samsung HW has some unusual quirks, which require
* Sumsung-specific workarounds. We override certain hc_driver
* functions here to achieve that. We explicitly do not enhance
* ohci_driver_overrides to allow this more easily, since this
* is an unusual case, and we don't want to encourage others to
* override these functions by making it too easy.
*/
ohci_s3c2410_hc_driver.hub_status_data = ohci_s3c2410_hub_status_data;
ohci_s3c2410_hc_driver.hub_control = ohci_s3c2410_hub_control;
return platform_driver_register(&ohci_hcd_s3c2410_driver);
}
module_init(ohci_s3c2410_init);
static void __exit ohci_s3c2410_cleanup(void)
{
platform_driver_unregister(&ohci_hcd_s3c2410_driver);
}
module_exit(ohci_s3c2410_cleanup);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:s3c2410-ohci");