| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Linus Torvalds | 3903 | 60.73% | 2 | 2.02% |
| Greg Kroah-Hartman | 420 | 6.53% | 7 | 7.07% |
| Linus Torvalds (pre-git) | 368 | 5.73% | 27 | 27.27% |
| Joe Perches | 365 | 5.68% | 1 | 1.01% |
| Bartlomiej Zolnierkiewicz | 310 | 4.82% | 4 | 4.04% |
| Alan Stern | 305 | 4.75% | 9 | 9.09% |
| Matthew Dharm | 290 | 4.51% | 22 | 22.22% |
| Boaz Harrosh | 257 | 4.00% | 5 | 5.05% |
| Alan Cox | 105 | 1.63% | 1 | 1.01% |
| Akinobu Mita | 18 | 0.28% | 1 | 1.01% |
| Al Viro | 15 | 0.23% | 3 | 3.03% |
| Maciej Grela | 14 | 0.22% | 1 | 1.01% |
| Pete Zaitcev | 9 | 0.14% | 1 | 1.01% |
| Christoph Hellwig | 7 | 0.11% | 1 | 1.01% |
| Felipe Balbi | 7 | 0.11% | 2 | 2.02% |
| Lin Ma | 6 | 0.09% | 1 | 1.01% |
| Matthias Maennich | 5 | 0.08% | 1 | 1.01% |
| Huajun Li | 5 | 0.08% | 1 | 1.01% |
| Kris Borer | 4 | 0.06% | 1 | 1.01% |
| Colin Ian King | 4 | 0.06% | 2 | 2.02% |
| Steven Cole | 3 | 0.05% | 1 | 1.01% |
| Oliver Neukum | 2 | 0.03% | 1 | 1.01% |
| Ian Munsie | 2 | 0.03% | 1 | 1.01% |
| Lucas De Marchi | 1 | 0.02% | 1 | 1.01% |
| Rusty Russell | 1 | 0.02% | 1 | 1.01% |
| Yannick Guerrini | 1 | 0.02% | 1 | 1.01% |
| Total | 6427 | 99 |
// SPDX-License-Identifier: GPL-2.0+ /* * Transport & Protocol Driver for In-System Design, Inc. ISD200 ASIC * * Current development and maintenance: * (C) 2001-2002 Björn Stenberg (bjorn@haxx.se) * * Developed with the assistance of: * (C) 2002 Alan Stern <stern@rowland.org> * * Initial work: * (C) 2000 In-System Design, Inc. (support@in-system.com) * * The ISD200 ASIC does not natively support ATA devices. The chip * does implement an interface, the ATA Command Block (ATACB) which provides * a means of passing ATA commands and ATA register accesses to a device. * * History: * * 2002-10-19: Removed the specialized transfer routines. * (Alan Stern <stern@rowland.harvard.edu>) * 2001-02-24: Removed lots of duplicate code and simplified the structure. * (bjorn@haxx.se) * 2002-01-16: Fixed endianness bug so it works on the ppc arch. * (Luc Saillard <luc@saillard.org>) * 2002-01-17: All bitfields removed. * (bjorn@haxx.se) */ /* Include files */ #include <linux/jiffies.h> #include <linux/errno.h> #include <linux/module.h> #include <linux/slab.h> #include <linux/ata.h> #include <linux/hdreg.h> #include <linux/scatterlist.h> #include <scsi/scsi.h> #include <scsi/scsi_cmnd.h> #include <scsi/scsi_device.h> #include "usb.h" #include "transport.h" #include "protocol.h" #include "debug.h" #include "scsiglue.h" #define DRV_NAME "ums-isd200" MODULE_DESCRIPTION("Driver for In-System Design, Inc. ISD200 ASIC"); MODULE_AUTHOR("Björn Stenberg <bjorn@haxx.se>"); MODULE_LICENSE("GPL"); MODULE_IMPORT_NS(USB_STORAGE); static int isd200_Initialization(struct us_data *us); /* * The table of devices */ #define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ vendorName, productName, useProtocol, useTransport, \ initFunction, flags) \ { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ .driver_info = (flags) } static struct usb_device_id isd200_usb_ids[] = { # include "unusual_isd200.h" { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, isd200_usb_ids); #undef UNUSUAL_DEV /* * The flags table */ #define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ vendor_name, product_name, use_protocol, use_transport, \ init_function, Flags) \ { \ .vendorName = vendor_name, \ .productName = product_name, \ .useProtocol = use_protocol, \ .useTransport = use_transport, \ .initFunction = init_function, \ } static struct us_unusual_dev isd200_unusual_dev_list[] = { # include "unusual_isd200.h" { } /* Terminating entry */ }; #undef UNUSUAL_DEV /* Timeout defines (in Seconds) */ #define ISD200_ENUM_BSY_TIMEOUT 35 #define ISD200_ENUM_DETECT_TIMEOUT 30 #define ISD200_DEFAULT_TIMEOUT 30 /* device flags */ #define DF_ATA_DEVICE 0x0001 #define DF_MEDIA_STATUS_ENABLED 0x0002 #define DF_REMOVABLE_MEDIA 0x0004 /* capability bit definitions */ #define CAPABILITY_DMA 0x01 #define CAPABILITY_LBA 0x02 /* command_setX bit definitions */ #define COMMANDSET_REMOVABLE 0x02 #define COMMANDSET_MEDIA_STATUS 0x10 /* ATA Vendor Specific defines */ #define ATA_ADDRESS_DEVHEAD_STD 0xa0 #define ATA_ADDRESS_DEVHEAD_LBA_MODE 0x40 #define ATA_ADDRESS_DEVHEAD_SLAVE 0x10 /* Action Select bits */ #define ACTION_SELECT_0 0x01 #define ACTION_SELECT_1 0x02 #define ACTION_SELECT_2 0x04 #define ACTION_SELECT_3 0x08 #define ACTION_SELECT_4 0x10 #define ACTION_SELECT_5 0x20 #define ACTION_SELECT_6 0x40 #define ACTION_SELECT_7 0x80 /* Register Select bits */ #define REG_ALTERNATE_STATUS 0x01 #define REG_DEVICE_CONTROL 0x01 #define REG_ERROR 0x02 #define REG_FEATURES 0x02 #define REG_SECTOR_COUNT 0x04 #define REG_SECTOR_NUMBER 0x08 #define REG_CYLINDER_LOW 0x10 #define REG_CYLINDER_HIGH 0x20 #define REG_DEVICE_HEAD 0x40 #define REG_STATUS 0x80 #define REG_COMMAND 0x80 /* ATA registers offset definitions */ #define ATA_REG_ERROR_OFFSET 1 #define ATA_REG_LCYL_OFFSET 4 #define ATA_REG_HCYL_OFFSET 5 #define ATA_REG_STATUS_OFFSET 7 /* ATA error definitions not in <linux/hdreg.h> */ #define ATA_ERROR_MEDIA_CHANGE 0x20 /* ATA command definitions not in <linux/hdreg.h> */ #define ATA_COMMAND_GET_MEDIA_STATUS 0xDA #define ATA_COMMAND_MEDIA_EJECT 0xED /* ATA drive control definitions */ #define ATA_DC_DISABLE_INTERRUPTS 0x02 #define ATA_DC_RESET_CONTROLLER 0x04 #define ATA_DC_REENABLE_CONTROLLER 0x00 /* * General purpose return codes */ #define ISD200_ERROR -1 #define ISD200_GOOD 0 /* * Transport return codes */ #define ISD200_TRANSPORT_GOOD 0 /* Transport good, command good */ #define ISD200_TRANSPORT_FAILED 1 /* Transport good, command failed */ #define ISD200_TRANSPORT_ERROR 2 /* Transport bad (i.e. device dead) */ /* driver action codes */ #define ACTION_READ_STATUS 0 #define ACTION_RESET 1 #define ACTION_REENABLE 2 #define ACTION_SOFT_RESET 3 #define ACTION_ENUM 4 #define ACTION_IDENTIFY 5 /* * ata_cdb struct */ union ata_cdb { struct { unsigned char SignatureByte0; unsigned char SignatureByte1; unsigned char ActionSelect; unsigned char RegisterSelect; unsigned char TransferBlockSize; unsigned char WriteData3F6; unsigned char WriteData1F1; unsigned char WriteData1F2; unsigned char WriteData1F3; unsigned char WriteData1F4; unsigned char WriteData1F5; unsigned char WriteData1F6; unsigned char WriteData1F7; unsigned char Reserved[3]; } generic; struct { unsigned char SignatureByte0; unsigned char SignatureByte1; unsigned char ActionSelect; unsigned char RegisterSelect; unsigned char TransferBlockSize; unsigned char AlternateStatusByte; unsigned char ErrorByte; unsigned char SectorCountByte; unsigned char SectorNumberByte; unsigned char CylinderLowByte; unsigned char CylinderHighByte; unsigned char DeviceHeadByte; unsigned char StatusByte; unsigned char Reserved[3]; } read; struct { unsigned char SignatureByte0; unsigned char SignatureByte1; unsigned char ActionSelect; unsigned char RegisterSelect; unsigned char TransferBlockSize; unsigned char DeviceControlByte; unsigned char FeaturesByte; unsigned char SectorCountByte; unsigned char SectorNumberByte; unsigned char CylinderLowByte; unsigned char CylinderHighByte; unsigned char DeviceHeadByte; unsigned char CommandByte; unsigned char Reserved[3]; } write; }; /* * Inquiry data structure. This is the data returned from the target * after it receives an inquiry. * * This structure may be extended by the number of bytes specified * in the field AdditionalLength. The defined size constant only * includes fields through ProductRevisionLevel. */ /* * DeviceType field */ #define DIRECT_ACCESS_DEVICE 0x00 /* disks */ #define DEVICE_REMOVABLE 0x80 struct inquiry_data { unsigned char DeviceType; unsigned char DeviceTypeModifier; unsigned char Versions; unsigned char Format; unsigned char AdditionalLength; unsigned char Reserved[2]; unsigned char Capability; unsigned char VendorId[8]; unsigned char ProductId[16]; unsigned char ProductRevisionLevel[4]; unsigned char VendorSpecific[20]; unsigned char Reserved3[40]; } __attribute__ ((packed)); /* * INQUIRY data buffer size */ #define INQUIRYDATABUFFERSIZE 36 /* * ISD200 CONFIG data struct */ #define ATACFG_TIMING 0x0f #define ATACFG_ATAPI_RESET 0x10 #define ATACFG_MASTER 0x20 #define ATACFG_BLOCKSIZE 0xa0 #define ATACFGE_LAST_LUN 0x07 #define ATACFGE_DESC_OVERRIDE 0x08 #define ATACFGE_STATE_SUSPEND 0x10 #define ATACFGE_SKIP_BOOT 0x20 #define ATACFGE_CONF_DESC2 0x40 #define ATACFGE_INIT_STATUS 0x80 #define CFG_CAPABILITY_SRST 0x01 struct isd200_config { unsigned char EventNotification; unsigned char ExternalClock; unsigned char ATAInitTimeout; unsigned char ATAConfig; unsigned char ATAMajorCommand; unsigned char ATAMinorCommand; unsigned char ATAExtraConfig; unsigned char Capability; }__attribute__ ((packed)); /* * ISD200 driver information struct */ struct isd200_info { struct inquiry_data InquiryData; u16 *id; struct isd200_config ConfigData; unsigned char *RegsBuf; unsigned char ATARegs[8]; unsigned char DeviceHead; unsigned char DeviceFlags; /* maximum number of LUNs supported */ unsigned char MaxLUNs; unsigned char cmnd[MAX_COMMAND_SIZE]; struct scsi_cmnd srb; struct scatterlist sg; }; /* * Read Capacity Data - returned in Big Endian format */ struct read_capacity_data { __be32 LogicalBlockAddress; __be32 BytesPerBlock; }; /* * Read Block Limits Data - returned in Big Endian format * This structure returns the maximum and minimum block * size for a TAPE device. */ struct read_block_limits { unsigned char Reserved; unsigned char BlockMaximumSize[3]; unsigned char BlockMinimumSize[2]; }; /* * Sense Data Format */ #define SENSE_ERRCODE 0x7f #define SENSE_ERRCODE_VALID 0x80 #define SENSE_FLAG_SENSE_KEY 0x0f #define SENSE_FLAG_BAD_LENGTH 0x20 #define SENSE_FLAG_END_OF_MEDIA 0x40 #define SENSE_FLAG_FILE_MARK 0x80 struct sense_data { unsigned char ErrorCode; unsigned char SegmentNumber; unsigned char Flags; unsigned char Information[4]; unsigned char AdditionalSenseLength; unsigned char CommandSpecificInformation[4]; unsigned char AdditionalSenseCode; unsigned char AdditionalSenseCodeQualifier; unsigned char FieldReplaceableUnitCode; unsigned char SenseKeySpecific[3]; } __attribute__ ((packed)); /* * Default request sense buffer size */ #define SENSE_BUFFER_SIZE 18 /*********************************************************************** * Helper routines ***********************************************************************/ /************************************************************************** * isd200_build_sense * * Builds an artificial sense buffer to report the results of a * failed command. * * RETURNS: * void */ static void isd200_build_sense(struct us_data *us, struct scsi_cmnd *srb) { struct isd200_info *info = (struct isd200_info *)us->extra; struct sense_data *buf = (struct sense_data *) &srb->sense_buffer[0]; unsigned char error = info->ATARegs[ATA_REG_ERROR_OFFSET]; if(error & ATA_ERROR_MEDIA_CHANGE) { buf->ErrorCode = 0x70 | SENSE_ERRCODE_VALID; buf->AdditionalSenseLength = 0xb; buf->Flags = UNIT_ATTENTION; buf->AdditionalSenseCode = 0; buf->AdditionalSenseCodeQualifier = 0; } else if (error & ATA_MCR) { buf->ErrorCode = 0x70 | SENSE_ERRCODE_VALID; buf->AdditionalSenseLength = 0xb; buf->Flags = UNIT_ATTENTION; buf->AdditionalSenseCode = 0; buf->AdditionalSenseCodeQualifier = 0; } else if (error & ATA_TRK0NF) { buf->ErrorCode = 0x70 | SENSE_ERRCODE_VALID; buf->AdditionalSenseLength = 0xb; buf->Flags = NOT_READY; buf->AdditionalSenseCode = 0; buf->AdditionalSenseCodeQualifier = 0; } else if (error & ATA_UNC) { buf->ErrorCode = 0x70 | SENSE_ERRCODE_VALID; buf->AdditionalSenseLength = 0xb; buf->Flags = DATA_PROTECT; buf->AdditionalSenseCode = 0; buf->AdditionalSenseCodeQualifier = 0; } else { buf->ErrorCode = 0; buf->AdditionalSenseLength = 0; buf->Flags = 0; buf->AdditionalSenseCode = 0; buf->AdditionalSenseCodeQualifier = 0; } } /*********************************************************************** * Transport routines ***********************************************************************/ /************************************************************************** * isd200_set_srb(), isd200_srb_set_bufflen() * * Two helpers to facilitate in initialization of scsi_cmnd structure * Will need to change when struct scsi_cmnd changes */ static void isd200_set_srb(struct isd200_info *info, enum dma_data_direction dir, void* buff, unsigned bufflen) { struct scsi_cmnd *srb = &info->srb; if (buff) sg_init_one(&info->sg, buff, bufflen); srb->sc_data_direction = dir; srb->sdb.table.sgl = buff ? &info->sg : NULL; srb->sdb.length = bufflen; srb->sdb.table.nents = buff ? 1 : 0; } static void isd200_srb_set_bufflen(struct scsi_cmnd *srb, unsigned bufflen) { srb->sdb.length = bufflen; } /************************************************************************** * isd200_action * * Routine for sending commands to the isd200 * * RETURNS: * ISD status code */ static int isd200_action( struct us_data *us, int action, void* pointer, int value ) { union ata_cdb ata; /* static to prevent this large struct being placed on the valuable stack */ static struct scsi_device srb_dev; struct isd200_info *info = (struct isd200_info *)us->extra; struct scsi_cmnd *srb = &info->srb; int status; memset(&ata, 0, sizeof(ata)); memcpy(srb->cmnd, info->cmnd, MAX_COMMAND_SIZE); srb->device = &srb_dev; ata.generic.SignatureByte0 = info->ConfigData.ATAMajorCommand; ata.generic.SignatureByte1 = info->ConfigData.ATAMinorCommand; ata.generic.TransferBlockSize = 1; switch ( action ) { case ACTION_READ_STATUS: usb_stor_dbg(us, " isd200_action(READ_STATUS)\n"); ata.generic.ActionSelect = ACTION_SELECT_0|ACTION_SELECT_2; ata.generic.RegisterSelect = REG_CYLINDER_LOW | REG_CYLINDER_HIGH | REG_STATUS | REG_ERROR; isd200_set_srb(info, DMA_FROM_DEVICE, pointer, value); break; case ACTION_ENUM: usb_stor_dbg(us, " isd200_action(ENUM,0x%02x)\n", value); ata.generic.ActionSelect = ACTION_SELECT_1|ACTION_SELECT_2| ACTION_SELECT_3|ACTION_SELECT_4| ACTION_SELECT_5; ata.generic.RegisterSelect = REG_DEVICE_HEAD; ata.write.DeviceHeadByte = value; isd200_set_srb(info, DMA_NONE, NULL, 0); break; case ACTION_RESET: usb_stor_dbg(us, " isd200_action(RESET)\n"); ata.generic.ActionSelect = ACTION_SELECT_1|ACTION_SELECT_2| ACTION_SELECT_3|ACTION_SELECT_4; ata.generic.RegisterSelect = REG_DEVICE_CONTROL; ata.write.DeviceControlByte = ATA_DC_RESET_CONTROLLER; isd200_set_srb(info, DMA_NONE, NULL, 0); break; case ACTION_REENABLE: usb_stor_dbg(us, " isd200_action(REENABLE)\n"); ata.generic.ActionSelect = ACTION_SELECT_1|ACTION_SELECT_2| ACTION_SELECT_3|ACTION_SELECT_4; ata.generic.RegisterSelect = REG_DEVICE_CONTROL; ata.write.DeviceControlByte = ATA_DC_REENABLE_CONTROLLER; isd200_set_srb(info, DMA_NONE, NULL, 0); break; case ACTION_SOFT_RESET: usb_stor_dbg(us, " isd200_action(SOFT_RESET)\n"); ata.generic.ActionSelect = ACTION_SELECT_1|ACTION_SELECT_5; ata.generic.RegisterSelect = REG_DEVICE_HEAD | REG_COMMAND; ata.write.DeviceHeadByte = info->DeviceHead; ata.write.CommandByte = ATA_CMD_DEV_RESET; isd200_set_srb(info, DMA_NONE, NULL, 0); break; case ACTION_IDENTIFY: usb_stor_dbg(us, " isd200_action(IDENTIFY)\n"); ata.generic.RegisterSelect = REG_COMMAND; ata.write.CommandByte = ATA_CMD_ID_ATA; isd200_set_srb(info, DMA_FROM_DEVICE, info->id, ATA_ID_WORDS * 2); break; default: usb_stor_dbg(us, "Error: Undefined action %d\n", action); return ISD200_ERROR; } memcpy(srb->cmnd, &ata, sizeof(ata.generic)); srb->cmd_len = sizeof(ata.generic); status = usb_stor_Bulk_transport(srb, us); if (status == USB_STOR_TRANSPORT_GOOD) status = ISD200_GOOD; else { usb_stor_dbg(us, " isd200_action(0x%02x) error: %d\n", action, status); status = ISD200_ERROR; /* need to reset device here */ } return status; } /************************************************************************** * isd200_read_regs * * Read ATA Registers * * RETURNS: * ISD status code */ static int isd200_read_regs( struct us_data *us ) { struct isd200_info *info = (struct isd200_info *)us->extra; int retStatus = ISD200_GOOD; int transferStatus; usb_stor_dbg(us, "Entering isd200_IssueATAReadRegs\n"); transferStatus = isd200_action( us, ACTION_READ_STATUS, info->RegsBuf, sizeof(info->ATARegs) ); if (transferStatus != ISD200_TRANSPORT_GOOD) { usb_stor_dbg(us, " Error reading ATA registers\n"); retStatus = ISD200_ERROR; } else { memcpy(info->ATARegs, info->RegsBuf, sizeof(info->ATARegs)); usb_stor_dbg(us, " Got ATA Register[ATA_REG_ERROR_OFFSET] = 0x%x\n", info->ATARegs[ATA_REG_ERROR_OFFSET]); } return retStatus; } /************************************************************************** * Invoke the transport and basic error-handling/recovery methods * * This is used by the protocol layers to actually send the message to * the device and receive the response. */ static void isd200_invoke_transport( struct us_data *us, struct scsi_cmnd *srb, union ata_cdb *ataCdb ) { int need_auto_sense = 0; int transferStatus; int result; /* send the command to the transport layer */ memcpy(srb->cmnd, ataCdb, sizeof(ataCdb->generic)); srb->cmd_len = sizeof(ataCdb->generic); transferStatus = usb_stor_Bulk_transport(srb, us); /* * if the command gets aborted by the higher layers, we need to * short-circuit all other processing */ if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) { usb_stor_dbg(us, "-- command was aborted\n"); goto Handle_Abort; } switch (transferStatus) { case USB_STOR_TRANSPORT_GOOD: /* Indicate a good result */ srb->result = SAM_STAT_GOOD; break; case USB_STOR_TRANSPORT_NO_SENSE: usb_stor_dbg(us, "-- transport indicates protocol failure\n"); srb->result = SAM_STAT_CHECK_CONDITION; return; case USB_STOR_TRANSPORT_FAILED: usb_stor_dbg(us, "-- transport indicates command failure\n"); need_auto_sense = 1; break; case USB_STOR_TRANSPORT_ERROR: usb_stor_dbg(us, "-- transport indicates transport error\n"); srb->result = DID_ERROR << 16; /* Need reset here */ return; default: usb_stor_dbg(us, "-- transport indicates unknown error\n"); srb->result = DID_ERROR << 16; /* Need reset here */ return; } if ((scsi_get_resid(srb) > 0) && !((srb->cmnd[0] == REQUEST_SENSE) || (srb->cmnd[0] == INQUIRY) || (srb->cmnd[0] == MODE_SENSE) || (srb->cmnd[0] == LOG_SENSE) || (srb->cmnd[0] == MODE_SENSE_10))) { usb_stor_dbg(us, "-- unexpectedly short transfer\n"); need_auto_sense = 1; } if (need_auto_sense) { result = isd200_read_regs(us); if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) { usb_stor_dbg(us, "-- auto-sense aborted\n"); goto Handle_Abort; } if (result == ISD200_GOOD) { isd200_build_sense(us, srb); srb->result = SAM_STAT_CHECK_CONDITION; /* If things are really okay, then let's show that */ if ((srb->sense_buffer[2] & 0xf) == 0x0) srb->result = SAM_STAT_GOOD; } else { srb->result = DID_ERROR << 16; /* Need reset here */ } } /* * Regardless of auto-sense, if we _know_ we have an error * condition, show that in the result code */ if (transferStatus == USB_STOR_TRANSPORT_FAILED) srb->result = SAM_STAT_CHECK_CONDITION; return; /* * abort processing: the bulk-only transport requires a reset * following an abort */ Handle_Abort: srb->result = DID_ABORT << 16; /* permit the reset transfer to take place */ clear_bit(US_FLIDX_ABORTING, &us->dflags); /* Need reset here */ } #ifdef CONFIG_USB_STORAGE_DEBUG static void isd200_log_config(struct us_data *us, struct isd200_info *info) { usb_stor_dbg(us, " Event Notification: 0x%x\n", info->ConfigData.EventNotification); usb_stor_dbg(us, " External Clock: 0x%x\n", info->ConfigData.ExternalClock); usb_stor_dbg(us, " ATA Init Timeout: 0x%x\n", info->ConfigData.ATAInitTimeout); usb_stor_dbg(us, " ATAPI Command Block Size: 0x%x\n", (info->ConfigData.ATAConfig & ATACFG_BLOCKSIZE) >> 6); usb_stor_dbg(us, " Master/Slave Selection: 0x%x\n", info->ConfigData.ATAConfig & ATACFG_MASTER); usb_stor_dbg(us, " ATAPI Reset: 0x%x\n", info->ConfigData.ATAConfig & ATACFG_ATAPI_RESET); usb_stor_dbg(us, " ATA Timing: 0x%x\n", info->ConfigData.ATAConfig & ATACFG_TIMING); usb_stor_dbg(us, " ATA Major Command: 0x%x\n", info->ConfigData.ATAMajorCommand); usb_stor_dbg(us, " ATA Minor Command: 0x%x\n", info->ConfigData.ATAMinorCommand); usb_stor_dbg(us, " Init Status: 0x%x\n", info->ConfigData.ATAExtraConfig & ATACFGE_INIT_STATUS); usb_stor_dbg(us, " Config Descriptor 2: 0x%x\n", info->ConfigData.ATAExtraConfig & ATACFGE_CONF_DESC2); usb_stor_dbg(us, " Skip Device Boot: 0x%x\n", info->ConfigData.ATAExtraConfig & ATACFGE_SKIP_BOOT); usb_stor_dbg(us, " ATA 3 State Suspend: 0x%x\n", info->ConfigData.ATAExtraConfig & ATACFGE_STATE_SUSPEND); usb_stor_dbg(us, " Descriptor Override: 0x%x\n", info->ConfigData.ATAExtraConfig & ATACFGE_DESC_OVERRIDE); usb_stor_dbg(us, " Last LUN Identifier: 0x%x\n", info->ConfigData.ATAExtraConfig & ATACFGE_LAST_LUN); usb_stor_dbg(us, " SRST Enable: 0x%x\n", info->ConfigData.ATAExtraConfig & CFG_CAPABILITY_SRST); } #endif /************************************************************************** * isd200_write_config * * Write the ISD200 Configuration data * * RETURNS: * ISD status code */ static int isd200_write_config( struct us_data *us ) { struct isd200_info *info = (struct isd200_info *)us->extra; int retStatus = ISD200_GOOD; int result; #ifdef CONFIG_USB_STORAGE_DEBUG usb_stor_dbg(us, "Entering isd200_write_config\n"); usb_stor_dbg(us, " Writing the following ISD200 Config Data:\n"); isd200_log_config(us, info); #endif /* let's send the command via the control pipe */ result = usb_stor_ctrl_transfer( us, us->send_ctrl_pipe, 0x01, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, 0x0000, 0x0002, (void *) &info->ConfigData, sizeof(info->ConfigData)); if (result >= 0) { usb_stor_dbg(us, " ISD200 Config Data was written successfully\n"); } else { usb_stor_dbg(us, " Request to write ISD200 Config Data failed!\n"); retStatus = ISD200_ERROR; } usb_stor_dbg(us, "Leaving isd200_write_config %08X\n", retStatus); return retStatus; } /************************************************************************** * isd200_read_config * * Reads the ISD200 Configuration data * * RETURNS: * ISD status code */ static int isd200_read_config( struct us_data *us ) { struct isd200_info *info = (struct isd200_info *)us->extra; int retStatus = ISD200_GOOD; int result; usb_stor_dbg(us, "Entering isd200_read_config\n"); /* read the configuration information from ISD200. Use this to */ /* determine what the special ATA CDB bytes are. */ result = usb_stor_ctrl_transfer( us, us->recv_ctrl_pipe, 0x02, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, 0x0000, 0x0002, (void *) &info->ConfigData, sizeof(info->ConfigData)); if (result >= 0) { usb_stor_dbg(us, " Retrieved the following ISD200 Config Data:\n"); #ifdef CONFIG_USB_STORAGE_DEBUG isd200_log_config(us, info); #endif } else { usb_stor_dbg(us, " Request to get ISD200 Config Data failed!\n"); retStatus = ISD200_ERROR; } usb_stor_dbg(us, "Leaving isd200_read_config %08X\n", retStatus); return retStatus; } /************************************************************************** * isd200_atapi_soft_reset * * Perform an Atapi Soft Reset on the device * * RETURNS: * NT status code */ static int isd200_atapi_soft_reset( struct us_data *us ) { int retStatus = ISD200_GOOD; int transferStatus; usb_stor_dbg(us, "Entering isd200_atapi_soft_reset\n"); transferStatus = isd200_action( us, ACTION_SOFT_RESET, NULL, 0 ); if (transferStatus != ISD200_TRANSPORT_GOOD) { usb_stor_dbg(us, " Error issuing Atapi Soft Reset\n"); retStatus = ISD200_ERROR; } usb_stor_dbg(us, "Leaving isd200_atapi_soft_reset %08X\n", retStatus); return retStatus; } /************************************************************************** * isd200_srst * * Perform an SRST on the device * * RETURNS: * ISD status code */ static int isd200_srst( struct us_data *us ) { int retStatus = ISD200_GOOD; int transferStatus; usb_stor_dbg(us, "Entering isd200_SRST\n"); transferStatus = isd200_action( us, ACTION_RESET, NULL, 0 ); /* check to see if this request failed */ if (transferStatus != ISD200_TRANSPORT_GOOD) { usb_stor_dbg(us, " Error issuing SRST\n"); retStatus = ISD200_ERROR; } else { /* delay 10ms to give the drive a chance to see it */ msleep(10); transferStatus = isd200_action( us, ACTION_REENABLE, NULL, 0 ); if (transferStatus != ISD200_TRANSPORT_GOOD) { usb_stor_dbg(us, " Error taking drive out of reset\n"); retStatus = ISD200_ERROR; } else { /* delay 50ms to give the drive a chance to recover after SRST */ msleep(50); } } usb_stor_dbg(us, "Leaving isd200_srst %08X\n", retStatus); return retStatus; } /************************************************************************** * isd200_try_enum * * Helper function for isd200_manual_enum(). Does ENUM and READ_STATUS * and tries to analyze the status registers * * RETURNS: * ISD status code */ static int isd200_try_enum(struct us_data *us, unsigned char master_slave, int detect ) { int status = ISD200_GOOD; unsigned long endTime; struct isd200_info *info = (struct isd200_info *)us->extra; unsigned char *regs = info->RegsBuf; int recheckAsMaster = 0; if ( detect ) endTime = jiffies + ISD200_ENUM_DETECT_TIMEOUT * HZ; else endTime = jiffies + ISD200_ENUM_BSY_TIMEOUT * HZ; /* loop until we detect !BSY or timeout */ while(1) { status = isd200_action( us, ACTION_ENUM, NULL, master_slave ); if ( status != ISD200_GOOD ) break; status = isd200_action( us, ACTION_READ_STATUS, regs, 8 ); if ( status != ISD200_GOOD ) break; if (!detect) { if (regs[ATA_REG_STATUS_OFFSET] & ATA_BUSY) { usb_stor_dbg(us, " %s status is still BSY, try again...\n", master_slave == ATA_ADDRESS_DEVHEAD_STD ? "Master" : "Slave"); } else { usb_stor_dbg(us, " %s status !BSY, continue with next operation\n", master_slave == ATA_ADDRESS_DEVHEAD_STD ? "Master" : "Slave"); break; } } /* check for ATA_BUSY and */ /* ATA_DF (workaround ATA Zip drive) and */ /* ATA_ERR (workaround for Archos CD-ROM) */ else if (regs[ATA_REG_STATUS_OFFSET] & (ATA_BUSY | ATA_DF | ATA_ERR)) { usb_stor_dbg(us, " Status indicates it is not ready, try again...\n"); } /* check for DRDY, ATA devices set DRDY after SRST */ else if (regs[ATA_REG_STATUS_OFFSET] & ATA_DRDY) { usb_stor_dbg(us, " Identified ATA device\n"); info->DeviceFlags |= DF_ATA_DEVICE; info->DeviceHead = master_slave; break; } /* * check Cylinder High/Low to * determine if it is an ATAPI device */ else if (regs[ATA_REG_HCYL_OFFSET] == 0xEB && regs[ATA_REG_LCYL_OFFSET] == 0x14) { /* * It seems that the RICOH * MP6200A CD/RW drive will * report itself okay as a * slave when it is really a * master. So this check again * as a master device just to * make sure it doesn't report * itself okay as a master also */ if ((master_slave & ATA_ADDRESS_DEVHEAD_SLAVE) && !recheckAsMaster) { usb_stor_dbg(us, " Identified ATAPI device as slave. Rechecking again as master\n"); recheckAsMaster = 1; master_slave = ATA_ADDRESS_DEVHEAD_STD; } else { usb_stor_dbg(us, " Identified ATAPI device\n"); info->DeviceHead = master_slave; status = isd200_atapi_soft_reset(us); break; } } else { usb_stor_dbg(us, " Not ATA, not ATAPI - Weird\n"); break; } /* check for timeout on this request */ if (time_after_eq(jiffies, endTime)) { if (!detect) usb_stor_dbg(us, " BSY check timeout, just continue with next operation...\n"); else usb_stor_dbg(us, " Device detect timeout!\n"); break; } } return status; } /************************************************************************** * isd200_manual_enum * * Determines if the drive attached is an ATA or ATAPI and if it is a * master or slave. * * RETURNS: * ISD status code */ static int isd200_manual_enum(struct us_data *us) { struct isd200_info *info = (struct isd200_info *)us->extra; int retStatus = ISD200_GOOD; usb_stor_dbg(us, "Entering isd200_manual_enum\n"); retStatus = isd200_read_config(us); if (retStatus == ISD200_GOOD) { int isslave; /* master or slave? */ retStatus = isd200_try_enum( us, ATA_ADDRESS_DEVHEAD_STD, 0); if (retStatus == ISD200_GOOD) retStatus = isd200_try_enum( us, ATA_ADDRESS_DEVHEAD_SLAVE, 0); if (retStatus == ISD200_GOOD) { retStatus = isd200_srst(us); if (retStatus == ISD200_GOOD) /* ata or atapi? */ retStatus = isd200_try_enum( us, ATA_ADDRESS_DEVHEAD_STD, 1); } isslave = (info->DeviceHead & ATA_ADDRESS_DEVHEAD_SLAVE) ? 1 : 0; if (!(info->ConfigData.ATAConfig & ATACFG_MASTER)) { usb_stor_dbg(us, " Setting Master/Slave selection to %d\n", isslave); info->ConfigData.ATAConfig &= 0x3f; info->ConfigData.ATAConfig |= (isslave<<6); retStatus = isd200_write_config(us); } } usb_stor_dbg(us, "Leaving isd200_manual_enum %08X\n", retStatus); return(retStatus); } static void isd200_fix_driveid(u16 *id) { #ifndef __LITTLE_ENDIAN # ifdef __BIG_ENDIAN int i; for (i = 0; i < ATA_ID_WORDS; i++) id[i] = __le16_to_cpu(id[i]); # else # error "Please fix <asm/byteorder.h>" # endif #endif } static void isd200_dump_driveid(struct us_data *us, u16 *id) { usb_stor_dbg(us, " Identify Data Structure:\n"); usb_stor_dbg(us, " config = 0x%x\n", id[ATA_ID_CONFIG]); usb_stor_dbg(us, " cyls = 0x%x\n", id[ATA_ID_CYLS]); usb_stor_dbg(us, " heads = 0x%x\n", id[ATA_ID_HEADS]); usb_stor_dbg(us, " track_bytes = 0x%x\n", id[4]); usb_stor_dbg(us, " sector_bytes = 0x%x\n", id[5]); usb_stor_dbg(us, " sectors = 0x%x\n", id[ATA_ID_SECTORS]); usb_stor_dbg(us, " serial_no[0] = 0x%x\n", *(char *)&id[ATA_ID_SERNO]); usb_stor_dbg(us, " buf_type = 0x%x\n", id[20]); usb_stor_dbg(us, " buf_size = 0x%x\n", id[ATA_ID_BUF_SIZE]); usb_stor_dbg(us, " ecc_bytes = 0x%x\n", id[22]); usb_stor_dbg(us, " fw_rev[0] = 0x%x\n", *(char *)&id[ATA_ID_FW_REV]); usb_stor_dbg(us, " model[0] = 0x%x\n", *(char *)&id[ATA_ID_PROD]); usb_stor_dbg(us, " max_multsect = 0x%x\n", id[ATA_ID_MAX_MULTSECT] & 0xff); usb_stor_dbg(us, " dword_io = 0x%x\n", id[ATA_ID_DWORD_IO]); usb_stor_dbg(us, " capability = 0x%x\n", id[ATA_ID_CAPABILITY] >> 8); usb_stor_dbg(us, " tPIO = 0x%x\n", id[ATA_ID_OLD_PIO_MODES] >> 8); usb_stor_dbg(us, " tDMA = 0x%x\n", id[ATA_ID_OLD_DMA_MODES] >> 8); usb_stor_dbg(us, " field_valid = 0x%x\n", id[ATA_ID_FIELD_VALID]); usb_stor_dbg(us, " cur_cyls = 0x%x\n", id[ATA_ID_CUR_CYLS]); usb_stor_dbg(us, " cur_heads = 0x%x\n", id[ATA_ID_CUR_HEADS]); usb_stor_dbg(us, " cur_sectors = 0x%x\n", id[ATA_ID_CUR_SECTORS]); usb_stor_dbg(us, " cur_capacity = 0x%x\n", ata_id_u32(id, 57)); usb_stor_dbg(us, " multsect = 0x%x\n", id[ATA_ID_MULTSECT] & 0xff); usb_stor_dbg(us, " lba_capacity = 0x%x\n", ata_id_u32(id, ATA_ID_LBA_CAPACITY)); usb_stor_dbg(us, " command_set_1 = 0x%x\n", id[ATA_ID_COMMAND_SET_1]); usb_stor_dbg(us, " command_set_2 = 0x%x\n", id[ATA_ID_COMMAND_SET_2]); } /************************************************************************** * isd200_get_inquiry_data * * Get inquiry data * * RETURNS: * ISD status code */ static int isd200_get_inquiry_data( struct us_data *us ) { struct isd200_info *info = (struct isd200_info *)us->extra; int retStatus = ISD200_GOOD; u16 *id = info->id; usb_stor_dbg(us, "Entering isd200_get_inquiry_data\n"); /* set default to Master */ info->DeviceHead = ATA_ADDRESS_DEVHEAD_STD; /* attempt to manually enumerate this device */ retStatus = isd200_manual_enum(us); if (retStatus == ISD200_GOOD) { int transferStatus; /* check for an ATA device */ if (info->DeviceFlags & DF_ATA_DEVICE) { /* this must be an ATA device */ /* perform an ATA Command Identify */ transferStatus = isd200_action( us, ACTION_IDENTIFY, id, ATA_ID_WORDS * 2); if (transferStatus != ISD200_TRANSPORT_GOOD) { /* Error issuing ATA Command Identify */ usb_stor_dbg(us, " Error issuing ATA Command Identify\n"); retStatus = ISD200_ERROR; } else { /* ATA Command Identify successful */ int i; __be16 *src; __u16 *dest; isd200_fix_driveid(id); isd200_dump_driveid(us, id); memset(&info->InquiryData, 0, sizeof(info->InquiryData)); /* Standard IDE interface only supports disks */ info->InquiryData.DeviceType = DIRECT_ACCESS_DEVICE; /* The length must be at least 36 (5 + 31) */ info->InquiryData.AdditionalLength = 0x1F; if (id[ATA_ID_COMMAND_SET_1] & COMMANDSET_MEDIA_STATUS) { /* set the removable bit */ info->InquiryData.DeviceTypeModifier = DEVICE_REMOVABLE; info->DeviceFlags |= DF_REMOVABLE_MEDIA; } /* Fill in vendor identification fields */ src = (__be16 *)&id[ATA_ID_PROD]; dest = (__u16*)info->InquiryData.VendorId; for (i = 0; i < 4; i++) dest[i] = be16_to_cpu(src[i]); src = (__be16 *)&id[ATA_ID_PROD + 8/2]; dest = (__u16*)info->InquiryData.ProductId; for (i=0;i<8;i++) dest[i] = be16_to_cpu(src[i]); src = (__be16 *)&id[ATA_ID_FW_REV]; dest = (__u16*)info->InquiryData.ProductRevisionLevel; for (i=0;i<2;i++) dest[i] = be16_to_cpu(src[i]); /* determine if it supports Media Status Notification */ if (id[ATA_ID_COMMAND_SET_2] & COMMANDSET_MEDIA_STATUS) { usb_stor_dbg(us, " Device supports Media Status Notification\n"); /* * Indicate that it is enabled, even * though it is not. * This allows the lock/unlock of the * media to work correctly. */ info->DeviceFlags |= DF_MEDIA_STATUS_ENABLED; } else info->DeviceFlags &= ~DF_MEDIA_STATUS_ENABLED; } } else { /* * this must be an ATAPI device * use an ATAPI protocol (Transparent SCSI) */ us->protocol_name = "Transparent SCSI"; us->proto_handler = usb_stor_transparent_scsi_command; usb_stor_dbg(us, "Protocol changed to: %s\n", us->protocol_name); /* Free driver structure */ us->extra_destructor(info); kfree(info); us->extra = NULL; us->extra_destructor = NULL; } } usb_stor_dbg(us, "Leaving isd200_get_inquiry_data %08X\n", retStatus); return(retStatus); } /************************************************************************** * isd200_scsi_to_ata * * Translate SCSI commands to ATA commands. * * RETURNS: * 1 if the command needs to be sent to the transport layer * 0 otherwise */ static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us, union ata_cdb * ataCdb) { struct isd200_info *info = (struct isd200_info *)us->extra; u16 *id = info->id; int sendToTransport = 1; unsigned char sectnum, head; unsigned short cylinder; unsigned long lba; unsigned long blockCount; unsigned char senseData[8] = { 0, 0, 0, 0, 0, 0, 0, 0 }; memset(ataCdb, 0, sizeof(union ata_cdb)); /* SCSI Command */ switch (srb->cmnd[0]) { case INQUIRY: usb_stor_dbg(us, " ATA OUT - INQUIRY\n"); /* copy InquiryData */ usb_stor_set_xfer_buf((unsigned char *) &info->InquiryData, sizeof(info->InquiryData), srb); srb->result = SAM_STAT_GOOD; sendToTransport = 0; break; case MODE_SENSE: usb_stor_dbg(us, " ATA OUT - SCSIOP_MODE_SENSE\n"); /* Initialize the return buffer */ usb_stor_set_xfer_buf(senseData, sizeof(senseData), srb); if (info->DeviceFlags & DF_MEDIA_STATUS_ENABLED) { ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand; ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand; ataCdb->generic.TransferBlockSize = 1; ataCdb->generic.RegisterSelect = REG_COMMAND; ataCdb->write.CommandByte = ATA_COMMAND_GET_MEDIA_STATUS; isd200_srb_set_bufflen(srb, 0); } else { usb_stor_dbg(us, " Media Status not supported, just report okay\n"); srb->result = SAM_STAT_GOOD; sendToTransport = 0; } break; case TEST_UNIT_READY: usb_stor_dbg(us, " ATA OUT - SCSIOP_TEST_UNIT_READY\n"); if (info->DeviceFlags & DF_MEDIA_STATUS_ENABLED) { ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand; ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand; ataCdb->generic.TransferBlockSize = 1; ataCdb->generic.RegisterSelect = REG_COMMAND; ataCdb->write.CommandByte = ATA_COMMAND_GET_MEDIA_STATUS; isd200_srb_set_bufflen(srb, 0); } else { usb_stor_dbg(us, " Media Status not supported, just report okay\n"); srb->result = SAM_STAT_GOOD; sendToTransport = 0; } break; case READ_CAPACITY: { unsigned long capacity; struct read_capacity_data readCapacityData; usb_stor_dbg(us, " ATA OUT - SCSIOP_READ_CAPACITY\n"); if (ata_id_has_lba(id)) capacity = ata_id_u32(id, ATA_ID_LBA_CAPACITY) - 1; else capacity = (id[ATA_ID_HEADS] * id[ATA_ID_CYLS] * id[ATA_ID_SECTORS]) - 1; readCapacityData.LogicalBlockAddress = cpu_to_be32(capacity); readCapacityData.BytesPerBlock = cpu_to_be32(0x200); usb_stor_set_xfer_buf((unsigned char *) &readCapacityData, sizeof(readCapacityData), srb); srb->result = SAM_STAT_GOOD; sendToTransport = 0; } break; case READ_10: usb_stor_dbg(us, " ATA OUT - SCSIOP_READ\n"); lba = be32_to_cpu(*(__be32 *)&srb->cmnd[2]); blockCount = (unsigned long)srb->cmnd[7]<<8 | (unsigned long)srb->cmnd[8]; if (ata_id_has_lba(id)) { sectnum = (unsigned char)(lba); cylinder = (unsigned short)(lba>>8); head = ATA_ADDRESS_DEVHEAD_LBA_MODE | (unsigned char)(lba>>24 & 0x0F); } else { sectnum = (u8)((lba % id[ATA_ID_SECTORS]) + 1); cylinder = (u16)(lba / (id[ATA_ID_SECTORS] * id[ATA_ID_HEADS])); head = (u8)((lba / id[ATA_ID_SECTORS]) % id[ATA_ID_HEADS]); } ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand; ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand; ataCdb->generic.TransferBlockSize = 1; ataCdb->generic.RegisterSelect = REG_SECTOR_COUNT | REG_SECTOR_NUMBER | REG_CYLINDER_LOW | REG_CYLINDER_HIGH | REG_DEVICE_HEAD | REG_COMMAND; ataCdb->write.SectorCountByte = (unsigned char)blockCount; ataCdb->write.SectorNumberByte = sectnum; ataCdb->write.CylinderHighByte = (unsigned char)(cylinder>>8); ataCdb->write.CylinderLowByte = (unsigned char)cylinder; ataCdb->write.DeviceHeadByte = (head | ATA_ADDRESS_DEVHEAD_STD); ataCdb->write.CommandByte = ATA_CMD_PIO_READ; break; case WRITE_10: usb_stor_dbg(us, " ATA OUT - SCSIOP_WRITE\n"); lba = be32_to_cpu(*(__be32 *)&srb->cmnd[2]); blockCount = (unsigned long)srb->cmnd[7]<<8 | (unsigned long)srb->cmnd[8]; if (ata_id_has_lba(id)) { sectnum = (unsigned char)(lba); cylinder = (unsigned short)(lba>>8); head = ATA_ADDRESS_DEVHEAD_LBA_MODE | (unsigned char)(lba>>24 & 0x0F); } else { sectnum = (u8)((lba % id[ATA_ID_SECTORS]) + 1); cylinder = (u16)(lba / (id[ATA_ID_SECTORS] * id[ATA_ID_HEADS])); head = (u8)((lba / id[ATA_ID_SECTORS]) % id[ATA_ID_HEADS]); } ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand; ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand; ataCdb->generic.TransferBlockSize = 1; ataCdb->generic.RegisterSelect = REG_SECTOR_COUNT | REG_SECTOR_NUMBER | REG_CYLINDER_LOW | REG_CYLINDER_HIGH | REG_DEVICE_HEAD | REG_COMMAND; ataCdb->write.SectorCountByte = (unsigned char)blockCount; ataCdb->write.SectorNumberByte = sectnum; ataCdb->write.CylinderHighByte = (unsigned char)(cylinder>>8); ataCdb->write.CylinderLowByte = (unsigned char)cylinder; ataCdb->write.DeviceHeadByte = (head | ATA_ADDRESS_DEVHEAD_STD); ataCdb->write.CommandByte = ATA_CMD_PIO_WRITE; break; case ALLOW_MEDIUM_REMOVAL: usb_stor_dbg(us, " ATA OUT - SCSIOP_MEDIUM_REMOVAL\n"); if (info->DeviceFlags & DF_REMOVABLE_MEDIA) { usb_stor_dbg(us, " srb->cmnd[4] = 0x%X\n", srb->cmnd[4]); ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand; ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand; ataCdb->generic.TransferBlockSize = 1; ataCdb->generic.RegisterSelect = REG_COMMAND; ataCdb->write.CommandByte = (srb->cmnd[4] & 0x1) ? ATA_CMD_MEDIA_LOCK : ATA_CMD_MEDIA_UNLOCK; isd200_srb_set_bufflen(srb, 0); } else { usb_stor_dbg(us, " Not removable media, just report okay\n"); srb->result = SAM_STAT_GOOD; sendToTransport = 0; } break; case START_STOP: usb_stor_dbg(us, " ATA OUT - SCSIOP_START_STOP_UNIT\n"); usb_stor_dbg(us, " srb->cmnd[4] = 0x%X\n", srb->cmnd[4]); if ((srb->cmnd[4] & 0x3) == 0x2) { usb_stor_dbg(us, " Media Eject\n"); ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand; ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand; ataCdb->generic.TransferBlockSize = 0; ataCdb->generic.RegisterSelect = REG_COMMAND; ataCdb->write.CommandByte = ATA_COMMAND_MEDIA_EJECT; } else if ((srb->cmnd[4] & 0x3) == 0x1) { usb_stor_dbg(us, " Get Media Status\n"); ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand; ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand; ataCdb->generic.TransferBlockSize = 1; ataCdb->generic.RegisterSelect = REG_COMMAND; ataCdb->write.CommandByte = ATA_COMMAND_GET_MEDIA_STATUS; isd200_srb_set_bufflen(srb, 0); } else { usb_stor_dbg(us, " Nothing to do, just report okay\n"); srb->result = SAM_STAT_GOOD; sendToTransport = 0; } break; default: usb_stor_dbg(us, "Unsupported SCSI command - 0x%X\n", srb->cmnd[0]); srb->result = DID_ERROR << 16; sendToTransport = 0; break; } return(sendToTransport); } /************************************************************************** * isd200_free_info * * Frees the driver structure. */ static void isd200_free_info_ptrs(void *info_) { struct isd200_info *info = (struct isd200_info *) info_; if (info) { kfree(info->id); kfree(info->RegsBuf); kfree(info->srb.sense_buffer); } } /************************************************************************** * isd200_init_info * * Allocates (if necessary) and initializes the driver structure. * * RETURNS: * error status code */ static int isd200_init_info(struct us_data *us) { struct isd200_info *info; info = kzalloc(sizeof(struct isd200_info), GFP_KERNEL); if (!info) return -ENOMEM; info->id = kzalloc(ATA_ID_WORDS * 2, GFP_KERNEL); info->RegsBuf = kmalloc(sizeof(info->ATARegs), GFP_KERNEL); info->srb.sense_buffer = kmalloc(SCSI_SENSE_BUFFERSIZE, GFP_KERNEL); if (!info->id || !info->RegsBuf || !info->srb.sense_buffer) { isd200_free_info_ptrs(info); kfree(info); return -ENOMEM; } us->extra = info; us->extra_destructor = isd200_free_info_ptrs; return 0; } /************************************************************************** * Initialization for the ISD200 */ static int isd200_Initialization(struct us_data *us) { usb_stor_dbg(us, "ISD200 Initialization...\n"); /* Initialize ISD200 info struct */ if (isd200_init_info(us) == ISD200_ERROR) { usb_stor_dbg(us, "ERROR Initializing ISD200 Info struct\n"); } else { /* Get device specific data */ if (isd200_get_inquiry_data(us) != ISD200_GOOD) usb_stor_dbg(us, "ISD200 Initialization Failure\n"); else usb_stor_dbg(us, "ISD200 Initialization complete\n"); } return 0; } /************************************************************************** * Protocol and Transport for the ISD200 ASIC * * This protocol and transport are for ATA devices connected to an ISD200 * ASIC. An ATAPI device that is connected as a slave device will be * detected in the driver initialization function and the protocol will * be changed to an ATAPI protocol (Transparent SCSI). * */ static void isd200_ata_command(struct scsi_cmnd *srb, struct us_data *us) { int sendToTransport, orig_bufflen; union ata_cdb ataCdb; /* Make sure driver was initialized */ if (us->extra == NULL) { usb_stor_dbg(us, "ERROR Driver not initialized\n"); srb->result = DID_ERROR << 16; return; } scsi_set_resid(srb, 0); /* scsi_bufflen might change in protocol translation to ata */ orig_bufflen = scsi_bufflen(srb); sendToTransport = isd200_scsi_to_ata(srb, us, &ataCdb); /* send the command to the transport layer */ if (sendToTransport) isd200_invoke_transport(us, srb, &ataCdb); isd200_srb_set_bufflen(srb, orig_bufflen); } static struct scsi_host_template isd200_host_template; static int isd200_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct us_data *us; int result; result = usb_stor_probe1(&us, intf, id, (id - isd200_usb_ids) + isd200_unusual_dev_list, &isd200_host_template); if (result) return result; us->protocol_name = "ISD200 ATA/ATAPI"; us->proto_handler = isd200_ata_command; result = usb_stor_probe2(us); return result; } static struct usb_driver isd200_driver = { .name = DRV_NAME, .probe = isd200_probe, .disconnect = usb_stor_disconnect, .suspend = usb_stor_suspend, .resume = usb_stor_resume, .reset_resume = usb_stor_reset_resume, .pre_reset = usb_stor_pre_reset, .post_reset = usb_stor_post_reset, .id_table = isd200_usb_ids, .soft_unbind = 1, .no_dynamic_id = 1, }; module_usb_stor_driver(isd200_driver, isd200_host_template, DRV_NAME);
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1