Contributors: 9
| Author |
Tokens |
Token Proportion |
Commits |
Commit Proportion |
| David A. Schleef |
426 |
73.45% |
1 |
4.00% |
| H Hartley Sweeten |
107 |
18.45% |
10 |
40.00% |
| Bill Pemberton |
25 |
4.31% |
7 |
28.00% |
| Arun Thomas |
14 |
2.41% |
1 |
4.00% |
| Anders Blomdell |
3 |
0.52% |
1 |
4.00% |
| Greg Kroah-Hartman |
2 |
0.34% |
2 |
8.00% |
| Alexander A. Klimov |
1 |
0.17% |
1 |
4.00% |
| Ravishankar Karkala Mallikarjunayya |
1 |
0.17% |
1 |
4.00% |
| Ian Abbott |
1 |
0.17% |
1 |
4.00% |
| Total |
580 |
|
25 |
|
// SPDX-License-Identifier: GPL-2.0+
/*
* comedi/drivers/dt2817.c
* Hardware driver for Data Translation DT2817
*
* COMEDI - Linux Control and Measurement Device Interface
* Copyright (C) 1998 David A. Schleef <ds@schleef.org>
*/
/*
* Driver: dt2817
* Description: Data Translation DT2817
* Author: ds
* Status: complete
* Devices: [Data Translation] DT2817 (dt2817)
*
* A very simple digital I/O card. Four banks of 8 lines, each bank
* is configurable for input or output. One wonders why it takes a
* 50 page manual to describe this thing.
*
* The driver (which, btw, is much less than 50 pages) has 1 subdevice
* with 32 channels, configurable in groups of 8.
*
* Configuration options:
* [0] - I/O port base base address
*/
#include <linux/module.h>
#include <linux/comedi/comedidev.h>
#define DT2817_CR 0
#define DT2817_DATA 1
static int dt2817_dio_insn_config(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
unsigned int chan = CR_CHAN(insn->chanspec);
unsigned int oe = 0;
unsigned int mask;
int ret;
if (chan < 8)
mask = 0x000000ff;
else if (chan < 16)
mask = 0x0000ff00;
else if (chan < 24)
mask = 0x00ff0000;
else
mask = 0xff000000;
ret = comedi_dio_insn_config(dev, s, insn, data, mask);
if (ret)
return ret;
if (s->io_bits & 0x000000ff)
oe |= 0x1;
if (s->io_bits & 0x0000ff00)
oe |= 0x2;
if (s->io_bits & 0x00ff0000)
oe |= 0x4;
if (s->io_bits & 0xff000000)
oe |= 0x8;
outb(oe, dev->iobase + DT2817_CR);
return insn->n;
}
static int dt2817_dio_insn_bits(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
unsigned long iobase = dev->iobase + DT2817_DATA;
unsigned int mask;
unsigned int val;
mask = comedi_dio_update_state(s, data);
if (mask) {
if (mask & 0x000000ff)
outb(s->state & 0xff, iobase + 0);
if (mask & 0x0000ff00)
outb((s->state >> 8) & 0xff, iobase + 1);
if (mask & 0x00ff0000)
outb((s->state >> 16) & 0xff, iobase + 2);
if (mask & 0xff000000)
outb((s->state >> 24) & 0xff, iobase + 3);
}
val = inb(iobase + 0);
val |= (inb(iobase + 1) << 8);
val |= (inb(iobase + 2) << 16);
val |= (inb(iobase + 3) << 24);
data[1] = val;
return insn->n;
}
static int dt2817_attach(struct comedi_device *dev, struct comedi_devconfig *it)
{
int ret;
struct comedi_subdevice *s;
ret = comedi_request_region(dev, it->options[0], 0x5);
if (ret)
return ret;
ret = comedi_alloc_subdevices(dev, 1);
if (ret)
return ret;
s = &dev->subdevices[0];
s->n_chan = 32;
s->type = COMEDI_SUBD_DIO;
s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
s->range_table = &range_digital;
s->maxdata = 1;
s->insn_bits = dt2817_dio_insn_bits;
s->insn_config = dt2817_dio_insn_config;
s->state = 0;
outb(0, dev->iobase + DT2817_CR);
return 0;
}
static struct comedi_driver dt2817_driver = {
.driver_name = "dt2817",
.module = THIS_MODULE,
.attach = dt2817_attach,
.detach = comedi_legacy_detach,
};
module_comedi_driver(dt2817_driver);
MODULE_AUTHOR("Comedi https://www.comedi.org");
MODULE_DESCRIPTION("Comedi low-level driver");
MODULE_LICENSE("GPL");