Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Eugeniy Paltsev | 1534 | 98.97% | 1 | 14.29% |
Yue haibing | 6 | 0.39% | 1 | 14.29% |
Rob Herring | 4 | 0.26% | 2 | 28.57% |
Michael Turquette | 3 | 0.19% | 1 | 14.29% |
Thomas Gleixner | 2 | 0.13% | 1 | 14.29% |
Lars-Peter Clausen | 1 | 0.06% | 1 | 14.29% |
Total | 1550 | 7 |
// SPDX-License-Identifier: GPL-2.0-only /* * Synopsys AXS10X SDP Generic PLL clock driver * * Copyright (C) 2017 Synopsys */ #include <linux/platform_device.h> #include <linux/module.h> #include <linux/clk-provider.h> #include <linux/delay.h> #include <linux/err.h> #include <linux/device.h> #include <linux/io.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/slab.h> /* PLL registers addresses */ #define PLL_REG_IDIV 0x0 #define PLL_REG_FBDIV 0x4 #define PLL_REG_ODIV 0x8 /* * Bit fields of the PLL IDIV/FBDIV/ODIV registers: * ________________________________________________________________________ * |31 15| 14 | 13 | 12 |11 6|5 0| * |-------RESRVED------|-NOUPDATE-|-BYPASS-|-EDGE-|--HIGHTIME--|--LOWTIME--| * |____________________|__________|________|______|____________|___________| * * Following macros determine the way of access to these registers * They should be set up only using the macros. * reg should be an u32 variable. */ #define PLL_REG_GET_LOW(reg) \ (((reg) & (0x3F << 0)) >> 0) #define PLL_REG_GET_HIGH(reg) \ (((reg) & (0x3F << 6)) >> 6) #define PLL_REG_GET_EDGE(reg) \ (((reg) & (BIT(12))) ? 1 : 0) #define PLL_REG_GET_BYPASS(reg) \ (((reg) & (BIT(13))) ? 1 : 0) #define PLL_REG_GET_NOUPD(reg) \ (((reg) & (BIT(14))) ? 1 : 0) #define PLL_REG_GET_PAD(reg) \ (((reg) & (0x1FFFF << 15)) >> 15) #define PLL_REG_SET_LOW(reg, value) \ { reg |= (((value) & 0x3F) << 0); } #define PLL_REG_SET_HIGH(reg, value) \ { reg |= (((value) & 0x3F) << 6); } #define PLL_REG_SET_EDGE(reg, value) \ { reg |= (((value) & 0x01) << 12); } #define PLL_REG_SET_BYPASS(reg, value) \ { reg |= (((value) & 0x01) << 13); } #define PLL_REG_SET_NOUPD(reg, value) \ { reg |= (((value) & 0x01) << 14); } #define PLL_REG_SET_PAD(reg, value) \ { reg |= (((value) & 0x1FFFF) << 15); } #define PLL_LOCK BIT(0) #define PLL_ERROR BIT(1) #define PLL_MAX_LOCK_TIME 100 /* 100 us */ struct axs10x_pll_cfg { u32 rate; u32 idiv; u32 fbdiv; u32 odiv; }; static const struct axs10x_pll_cfg arc_pll_cfg[] = { { 33333333, 1, 1, 1 }, { 50000000, 1, 30, 20 }, { 75000000, 2, 45, 10 }, { 90000000, 2, 54, 10 }, { 100000000, 1, 30, 10 }, { 125000000, 2, 45, 6 }, {} }; static const struct axs10x_pll_cfg pgu_pll_cfg[] = { { 25200000, 1, 84, 90 }, { 50000000, 1, 100, 54 }, { 74250000, 1, 44, 16 }, {} }; struct axs10x_pll_clk { struct clk_hw hw; void __iomem *base; void __iomem *lock; const struct axs10x_pll_cfg *pll_cfg; struct device *dev; }; static inline void axs10x_pll_write(struct axs10x_pll_clk *clk, u32 reg, u32 val) { iowrite32(val, clk->base + reg); } static inline u32 axs10x_pll_read(struct axs10x_pll_clk *clk, u32 reg) { return ioread32(clk->base + reg); } static inline struct axs10x_pll_clk *to_axs10x_pll_clk(struct clk_hw *hw) { return container_of(hw, struct axs10x_pll_clk, hw); } static inline u32 axs10x_div_get_value(u32 reg) { if (PLL_REG_GET_BYPASS(reg)) return 1; return PLL_REG_GET_HIGH(reg) + PLL_REG_GET_LOW(reg); } static inline u32 axs10x_encode_div(unsigned int id, int upd) { u32 div = 0; PLL_REG_SET_LOW(div, (id % 2 == 0) ? id >> 1 : (id >> 1) + 1); PLL_REG_SET_HIGH(div, id >> 1); PLL_REG_SET_EDGE(div, id % 2); PLL_REG_SET_BYPASS(div, id == 1 ? 1 : 0); PLL_REG_SET_NOUPD(div, upd == 0 ? 1 : 0); return div; } static unsigned long axs10x_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) { u64 rate; u32 idiv, fbdiv, odiv; struct axs10x_pll_clk *clk = to_axs10x_pll_clk(hw); idiv = axs10x_div_get_value(axs10x_pll_read(clk, PLL_REG_IDIV)); fbdiv = axs10x_div_get_value(axs10x_pll_read(clk, PLL_REG_FBDIV)); odiv = axs10x_div_get_value(axs10x_pll_read(clk, PLL_REG_ODIV)); rate = (u64)parent_rate * fbdiv; do_div(rate, idiv * odiv); return rate; } static long axs10x_pll_round_rate(struct clk_hw *hw, unsigned long rate, unsigned long *prate) { int i; long best_rate; struct axs10x_pll_clk *clk = to_axs10x_pll_clk(hw); const struct axs10x_pll_cfg *pll_cfg = clk->pll_cfg; if (pll_cfg[0].rate == 0) return -EINVAL; best_rate = pll_cfg[0].rate; for (i = 1; pll_cfg[i].rate != 0; i++) { if (abs(rate - pll_cfg[i].rate) < abs(rate - best_rate)) best_rate = pll_cfg[i].rate; } return best_rate; } static int axs10x_pll_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate) { int i; struct axs10x_pll_clk *clk = to_axs10x_pll_clk(hw); const struct axs10x_pll_cfg *pll_cfg = clk->pll_cfg; for (i = 0; pll_cfg[i].rate != 0; i++) { if (pll_cfg[i].rate == rate) { axs10x_pll_write(clk, PLL_REG_IDIV, axs10x_encode_div(pll_cfg[i].idiv, 0)); axs10x_pll_write(clk, PLL_REG_FBDIV, axs10x_encode_div(pll_cfg[i].fbdiv, 0)); axs10x_pll_write(clk, PLL_REG_ODIV, axs10x_encode_div(pll_cfg[i].odiv, 1)); /* * Wait until CGU relocks and check error status. * If after timeout CGU is unlocked yet return error */ udelay(PLL_MAX_LOCK_TIME); if (!(ioread32(clk->lock) & PLL_LOCK)) return -ETIMEDOUT; if (ioread32(clk->lock) & PLL_ERROR) return -EINVAL; return 0; } } dev_err(clk->dev, "invalid rate=%ld, parent_rate=%ld\n", rate, parent_rate); return -EINVAL; } static const struct clk_ops axs10x_pll_ops = { .recalc_rate = axs10x_pll_recalc_rate, .round_rate = axs10x_pll_round_rate, .set_rate = axs10x_pll_set_rate, }; static int axs10x_pll_clk_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; const char *parent_name; struct axs10x_pll_clk *pll_clk; struct clk_init_data init = { }; int ret; pll_clk = devm_kzalloc(dev, sizeof(*pll_clk), GFP_KERNEL); if (!pll_clk) return -ENOMEM; pll_clk->base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(pll_clk->base)) return PTR_ERR(pll_clk->base); pll_clk->lock = devm_platform_ioremap_resource(pdev, 1); if (IS_ERR(pll_clk->lock)) return PTR_ERR(pll_clk->lock); init.name = dev->of_node->name; init.ops = &axs10x_pll_ops; parent_name = of_clk_get_parent_name(dev->of_node, 0); init.parent_names = &parent_name; init.num_parents = 1; pll_clk->hw.init = &init; pll_clk->dev = dev; pll_clk->pll_cfg = of_device_get_match_data(dev); if (!pll_clk->pll_cfg) { dev_err(dev, "No OF match data provided\n"); return -EINVAL; } ret = devm_clk_hw_register(dev, &pll_clk->hw); if (ret) { dev_err(dev, "failed to register %s clock\n", init.name); return ret; } return devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get, &pll_clk->hw); } static void __init of_axs10x_pll_clk_setup(struct device_node *node) { const char *parent_name; struct axs10x_pll_clk *pll_clk; struct clk_init_data init = { }; int ret; pll_clk = kzalloc(sizeof(*pll_clk), GFP_KERNEL); if (!pll_clk) return; pll_clk->base = of_iomap(node, 0); if (!pll_clk->base) { pr_err("failed to map pll div registers\n"); goto err_free_pll_clk; } pll_clk->lock = of_iomap(node, 1); if (!pll_clk->lock) { pr_err("failed to map pll lock register\n"); goto err_unmap_base; } init.name = node->name; init.ops = &axs10x_pll_ops; parent_name = of_clk_get_parent_name(node, 0); init.parent_names = &parent_name; init.num_parents = parent_name ? 1 : 0; pll_clk->hw.init = &init; pll_clk->pll_cfg = arc_pll_cfg; ret = clk_hw_register(NULL, &pll_clk->hw); if (ret) { pr_err("failed to register %pOFn clock\n", node); goto err_unmap_lock; } ret = of_clk_add_hw_provider(node, of_clk_hw_simple_get, &pll_clk->hw); if (ret) { pr_err("failed to add hw provider for %pOFn clock\n", node); goto err_unregister_clk; } return; err_unregister_clk: clk_hw_unregister(&pll_clk->hw); err_unmap_lock: iounmap(pll_clk->lock); err_unmap_base: iounmap(pll_clk->base); err_free_pll_clk: kfree(pll_clk); } CLK_OF_DECLARE(axs10x_pll_clock, "snps,axs10x-arc-pll-clock", of_axs10x_pll_clk_setup); static const struct of_device_id axs10x_pll_clk_id[] = { { .compatible = "snps,axs10x-pgu-pll-clock", .data = &pgu_pll_cfg}, { } }; MODULE_DEVICE_TABLE(of, axs10x_pll_clk_id); static struct platform_driver axs10x_pll_clk_driver = { .driver = { .name = "axs10x-pll-clock", .of_match_table = axs10x_pll_clk_id, }, .probe = axs10x_pll_clk_probe, }; builtin_platform_driver(axs10x_pll_clk_driver); MODULE_AUTHOR("Vlad Zakharov <vzakhar@synopsys.com>"); MODULE_DESCRIPTION("Synopsys AXS10X SDP Generic PLL Clock Driver"); MODULE_LICENSE("GPL v2");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1