Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
William Breathitt Gray | 1561 | 98.42% | 18 | 85.71% |
Linus Walleij | 17 | 1.07% | 1 | 4.76% |
David Howells | 6 | 0.38% | 1 | 4.76% |
Thomas Gleixner | 2 | 0.13% | 1 | 4.76% |
Total | 1586 | 21 |
// SPDX-License-Identifier: GPL-2.0-only /* * GPIO driver for the ACCES 104-DIO-48E series * Copyright (C) 2016 William Breathitt Gray * * This driver supports the following ACCES devices: 104-DIO-48E and * 104-DIO-24E. */ #include <linux/bits.h> #include <linux/device.h> #include <linux/err.h> #include <linux/i8254.h> #include <linux/ioport.h> #include <linux/irq.h> #include <linux/isa.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/regmap.h> #include <linux/spinlock.h> #include <linux/types.h> #include "gpio-i8255.h" MODULE_IMPORT_NS(I8255); #define DIO48E_EXTENT 16 #define MAX_NUM_DIO48E max_num_isa_dev(DIO48E_EXTENT) static unsigned int base[MAX_NUM_DIO48E]; static unsigned int num_dio48e; module_param_hw_array(base, uint, ioport, &num_dio48e, 0); MODULE_PARM_DESC(base, "ACCES 104-DIO-48E base addresses"); static unsigned int irq[MAX_NUM_DIO48E]; static unsigned int num_irq; module_param_hw_array(irq, uint, irq, &num_irq, 0); MODULE_PARM_DESC(irq, "ACCES 104-DIO-48E interrupt line numbers"); #define DIO48E_ENABLE_INTERRUPT 0xB #define DIO48E_DISABLE_INTERRUPT DIO48E_ENABLE_INTERRUPT #define DIO48E_ENABLE_COUNTER_TIMER_ADDRESSING 0xD #define DIO48E_DISABLE_COUNTER_TIMER_ADDRESSING DIO48E_ENABLE_COUNTER_TIMER_ADDRESSING #define DIO48E_CLEAR_INTERRUPT 0xF #define DIO48E_NUM_PPI 2 static const struct regmap_range dio48e_wr_ranges[] = { regmap_reg_range(0x0, 0x9), regmap_reg_range(0xB, 0xB), regmap_reg_range(0xD, 0xD), regmap_reg_range(0xF, 0xF), }; static const struct regmap_range dio48e_rd_ranges[] = { regmap_reg_range(0x0, 0x2), regmap_reg_range(0x4, 0x6), regmap_reg_range(0xB, 0xB), regmap_reg_range(0xD, 0xD), regmap_reg_range(0xF, 0xF), }; static const struct regmap_range dio48e_volatile_ranges[] = { i8255_volatile_regmap_range(0x0), i8255_volatile_regmap_range(0x4), regmap_reg_range(0xB, 0xB), regmap_reg_range(0xD, 0xD), regmap_reg_range(0xF, 0xF), }; static const struct regmap_range dio48e_precious_ranges[] = { regmap_reg_range(0xB, 0xB), regmap_reg_range(0xD, 0xD), regmap_reg_range(0xF, 0xF), }; static const struct regmap_access_table dio48e_wr_table = { .yes_ranges = dio48e_wr_ranges, .n_yes_ranges = ARRAY_SIZE(dio48e_wr_ranges), }; static const struct regmap_access_table dio48e_rd_table = { .yes_ranges = dio48e_rd_ranges, .n_yes_ranges = ARRAY_SIZE(dio48e_rd_ranges), }; static const struct regmap_access_table dio48e_volatile_table = { .yes_ranges = dio48e_volatile_ranges, .n_yes_ranges = ARRAY_SIZE(dio48e_volatile_ranges), }; static const struct regmap_access_table dio48e_precious_table = { .yes_ranges = dio48e_precious_ranges, .n_yes_ranges = ARRAY_SIZE(dio48e_precious_ranges), }; static const struct regmap_range pit_wr_ranges[] = { regmap_reg_range(0x0, 0x3), }; static const struct regmap_range pit_rd_ranges[] = { regmap_reg_range(0x0, 0x2), }; static const struct regmap_access_table pit_wr_table = { .yes_ranges = pit_wr_ranges, .n_yes_ranges = ARRAY_SIZE(pit_wr_ranges), }; static const struct regmap_access_table pit_rd_table = { .yes_ranges = pit_rd_ranges, .n_yes_ranges = ARRAY_SIZE(pit_rd_ranges), }; /* only bit 3 on each respective Port C supports interrupts */ #define DIO48E_REGMAP_IRQ(_ppi) \ [19 + (_ppi) * 24] = { \ .mask = BIT(_ppi), \ .type = { .types_supported = IRQ_TYPE_EDGE_RISING }, \ } static const struct regmap_irq dio48e_regmap_irqs[] = { DIO48E_REGMAP_IRQ(0), DIO48E_REGMAP_IRQ(1), }; /** * struct dio48e_gpio - GPIO device private data structure * @lock: synchronization lock to prevent I/O race conditions * @map: Regmap for the device * @regs: virtual mapping for device registers * @flags: IRQ flags saved during locking * @irq_mask: Current IRQ mask state on the device */ struct dio48e_gpio { raw_spinlock_t lock; struct regmap *map; void __iomem *regs; unsigned long flags; unsigned int irq_mask; }; static void dio48e_regmap_lock(void *lock_arg) __acquires(&dio48egpio->lock) { struct dio48e_gpio *const dio48egpio = lock_arg; unsigned long flags; raw_spin_lock_irqsave(&dio48egpio->lock, flags); dio48egpio->flags = flags; } static void dio48e_regmap_unlock(void *lock_arg) __releases(&dio48egpio->lock) { struct dio48e_gpio *const dio48egpio = lock_arg; raw_spin_unlock_irqrestore(&dio48egpio->lock, dio48egpio->flags); } static void pit_regmap_lock(void *lock_arg) __acquires(&dio48egpio->lock) { struct dio48e_gpio *const dio48egpio = lock_arg; unsigned long flags; raw_spin_lock_irqsave(&dio48egpio->lock, flags); dio48egpio->flags = flags; iowrite8(0x00, dio48egpio->regs + DIO48E_ENABLE_COUNTER_TIMER_ADDRESSING); } static void pit_regmap_unlock(void *lock_arg) __releases(&dio48egpio->lock) { struct dio48e_gpio *const dio48egpio = lock_arg; ioread8(dio48egpio->regs + DIO48E_DISABLE_COUNTER_TIMER_ADDRESSING); raw_spin_unlock_irqrestore(&dio48egpio->lock, dio48egpio->flags); } static int dio48e_handle_mask_sync(const int index, const unsigned int mask_buf_def, const unsigned int mask_buf, void *const irq_drv_data) { struct dio48e_gpio *const dio48egpio = irq_drv_data; const unsigned int prev_mask = dio48egpio->irq_mask; int err; unsigned int val; /* exit early if no change since the previous mask */ if (mask_buf == prev_mask) return 0; /* remember the current mask for the next mask sync */ dio48egpio->irq_mask = mask_buf; /* if all previously masked, enable interrupts when unmasking */ if (prev_mask == mask_buf_def) { err = regmap_write(dio48egpio->map, DIO48E_CLEAR_INTERRUPT, 0x00); if (err) return err; return regmap_write(dio48egpio->map, DIO48E_ENABLE_INTERRUPT, 0x00); } /* if all are currently masked, disable interrupts */ if (mask_buf == mask_buf_def) return regmap_read(dio48egpio->map, DIO48E_DISABLE_INTERRUPT, &val); return 0; } #define DIO48E_NGPIO 48 static const char *dio48e_names[DIO48E_NGPIO] = { "PPI Group 0 Port A 0", "PPI Group 0 Port A 1", "PPI Group 0 Port A 2", "PPI Group 0 Port A 3", "PPI Group 0 Port A 4", "PPI Group 0 Port A 5", "PPI Group 0 Port A 6", "PPI Group 0 Port A 7", "PPI Group 0 Port B 0", "PPI Group 0 Port B 1", "PPI Group 0 Port B 2", "PPI Group 0 Port B 3", "PPI Group 0 Port B 4", "PPI Group 0 Port B 5", "PPI Group 0 Port B 6", "PPI Group 0 Port B 7", "PPI Group 0 Port C 0", "PPI Group 0 Port C 1", "PPI Group 0 Port C 2", "PPI Group 0 Port C 3", "PPI Group 0 Port C 4", "PPI Group 0 Port C 5", "PPI Group 0 Port C 6", "PPI Group 0 Port C 7", "PPI Group 1 Port A 0", "PPI Group 1 Port A 1", "PPI Group 1 Port A 2", "PPI Group 1 Port A 3", "PPI Group 1 Port A 4", "PPI Group 1 Port A 5", "PPI Group 1 Port A 6", "PPI Group 1 Port A 7", "PPI Group 1 Port B 0", "PPI Group 1 Port B 1", "PPI Group 1 Port B 2", "PPI Group 1 Port B 3", "PPI Group 1 Port B 4", "PPI Group 1 Port B 5", "PPI Group 1 Port B 6", "PPI Group 1 Port B 7", "PPI Group 1 Port C 0", "PPI Group 1 Port C 1", "PPI Group 1 Port C 2", "PPI Group 1 Port C 3", "PPI Group 1 Port C 4", "PPI Group 1 Port C 5", "PPI Group 1 Port C 6", "PPI Group 1 Port C 7" }; static int dio48e_irq_init_hw(struct regmap *const map) { unsigned int val; /* Disable IRQ by default */ return regmap_read(map, DIO48E_DISABLE_INTERRUPT, &val); } static int dio48e_probe(struct device *dev, unsigned int id) { const char *const name = dev_name(dev); struct i8255_regmap_config config = {}; void __iomem *regs; struct regmap *map; struct regmap_config dio48e_regmap_config; struct regmap_config pit_regmap_config; struct i8254_regmap_config pit_config; int err; struct regmap_irq_chip *chip; struct dio48e_gpio *dio48egpio; struct regmap_irq_chip_data *chip_data; if (!devm_request_region(dev, base[id], DIO48E_EXTENT, name)) { dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n", base[id], base[id] + DIO48E_EXTENT); return -EBUSY; } dio48egpio = devm_kzalloc(dev, sizeof(*dio48egpio), GFP_KERNEL); if (!dio48egpio) return -ENOMEM; regs = devm_ioport_map(dev, base[id], DIO48E_EXTENT); if (!regs) return -ENOMEM; dio48egpio->regs = regs; raw_spin_lock_init(&dio48egpio->lock); dio48e_regmap_config = (struct regmap_config) { .reg_bits = 8, .reg_stride = 1, .val_bits = 8, .lock = dio48e_regmap_lock, .unlock = dio48e_regmap_unlock, .lock_arg = dio48egpio, .io_port = true, .wr_table = &dio48e_wr_table, .rd_table = &dio48e_rd_table, .volatile_table = &dio48e_volatile_table, .precious_table = &dio48e_precious_table, .cache_type = REGCACHE_FLAT, }; map = devm_regmap_init_mmio(dev, regs, &dio48e_regmap_config); if (IS_ERR(map)) return dev_err_probe(dev, PTR_ERR(map), "Unable to initialize register map\n"); dio48egpio->map = map; pit_regmap_config = (struct regmap_config) { .name = "i8254", .reg_bits = 8, .reg_stride = 1, .val_bits = 8, .lock = pit_regmap_lock, .unlock = pit_regmap_unlock, .lock_arg = dio48egpio, .io_port = true, .wr_table = &pit_wr_table, .rd_table = &pit_rd_table, }; pit_config.map = devm_regmap_init_mmio(dev, regs, &pit_regmap_config); if (IS_ERR(pit_config.map)) return dev_err_probe(dev, PTR_ERR(pit_config.map), "Unable to initialize i8254 register map\n"); chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL); if (!chip) return -ENOMEM; chip->name = name; chip->mask_base = DIO48E_ENABLE_INTERRUPT; chip->ack_base = DIO48E_CLEAR_INTERRUPT; chip->no_status = true; chip->num_regs = 1; chip->irqs = dio48e_regmap_irqs; chip->num_irqs = ARRAY_SIZE(dio48e_regmap_irqs); chip->handle_mask_sync = dio48e_handle_mask_sync; chip->irq_drv_data = dio48egpio; /* Initialize to prevent spurious interrupts before we're ready */ err = dio48e_irq_init_hw(map); if (err) return err; err = devm_regmap_add_irq_chip(dev, map, irq[id], 0, 0, chip, &chip_data); if (err) return dev_err_probe(dev, err, "IRQ registration failed\n"); pit_config.parent = dev; err = devm_i8254_regmap_register(dev, &pit_config); if (err) return err; config.parent = dev; config.map = map; config.num_ppi = DIO48E_NUM_PPI; config.names = dio48e_names; config.domain = regmap_irq_get_domain(chip_data); return devm_i8255_regmap_register(dev, &config); } static struct isa_driver dio48e_driver = { .probe = dio48e_probe, .driver = { .name = "104-dio-48e" }, }; module_isa_driver_with_irq(dio48e_driver, num_dio48e, num_irq); MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@gmail.com>"); MODULE_DESCRIPTION("ACCES 104-DIO-48E GPIO driver"); MODULE_LICENSE("GPL v2"); MODULE_IMPORT_NS(I8254);
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1