Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Baolin Wang | 2853 | 91.77% | 4 | 25.00% |
Bartosz Golaszewski | 158 | 5.08% | 3 | 18.75% |
Cixi Geng | 57 | 1.83% | 1 | 6.25% |
Neo Hou | 24 | 0.77% | 2 | 12.50% |
Bruce Chen | 11 | 0.35% | 1 | 6.25% |
Gustavo A. R. Silva | 3 | 0.10% | 2 | 12.50% |
Rob Herring | 1 | 0.03% | 1 | 6.25% |
Enrico Weigelt | 1 | 0.03% | 1 | 6.25% |
Chunyan Zhang | 1 | 0.03% | 1 | 6.25% |
Total | 3109 | 16 |
// SPDX-License-Identifier: GPL-2.0 /* * Copyright (C) 2018 Spreadtrum Communications Inc. * Copyright (C) 2018 Linaro Ltd. */ #include <linux/bitops.h> #include <linux/gpio/driver.h> #include <linux/interrupt.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/notifier.h> #include <linux/of.h> #include <linux/platform_device.h> #include <linux/spinlock.h> /* EIC registers definition */ #define SPRD_EIC_DBNC_DATA 0x0 #define SPRD_EIC_DBNC_DMSK 0x4 #define SPRD_EIC_DBNC_IEV 0x14 #define SPRD_EIC_DBNC_IE 0x18 #define SPRD_EIC_DBNC_RIS 0x1c #define SPRD_EIC_DBNC_MIS 0x20 #define SPRD_EIC_DBNC_IC 0x24 #define SPRD_EIC_DBNC_TRIG 0x28 #define SPRD_EIC_DBNC_CTRL0 0x40 #define SPRD_EIC_LATCH_INTEN 0x0 #define SPRD_EIC_LATCH_INTRAW 0x4 #define SPRD_EIC_LATCH_INTMSK 0x8 #define SPRD_EIC_LATCH_INTCLR 0xc #define SPRD_EIC_LATCH_INTPOL 0x10 #define SPRD_EIC_LATCH_INTMODE 0x14 #define SPRD_EIC_ASYNC_INTIE 0x0 #define SPRD_EIC_ASYNC_INTRAW 0x4 #define SPRD_EIC_ASYNC_INTMSK 0x8 #define SPRD_EIC_ASYNC_INTCLR 0xc #define SPRD_EIC_ASYNC_INTMODE 0x10 #define SPRD_EIC_ASYNC_INTBOTH 0x14 #define SPRD_EIC_ASYNC_INTPOL 0x18 #define SPRD_EIC_ASYNC_DATA 0x1c #define SPRD_EIC_SYNC_INTIE 0x0 #define SPRD_EIC_SYNC_INTRAW 0x4 #define SPRD_EIC_SYNC_INTMSK 0x8 #define SPRD_EIC_SYNC_INTCLR 0xc #define SPRD_EIC_SYNC_INTMODE 0x10 #define SPRD_EIC_SYNC_INTBOTH 0x14 #define SPRD_EIC_SYNC_INTPOL 0x18 #define SPRD_EIC_SYNC_DATA 0x1c /* * The digital-chip EIC controller can support maximum 3 banks, and each bank * contains 8 EICs. */ #define SPRD_EIC_MAX_BANK 3 #define SPRD_EIC_PER_BANK_NR 8 #define SPRD_EIC_DATA_MASK GENMASK(7, 0) #define SPRD_EIC_BIT(x) ((x) & (SPRD_EIC_PER_BANK_NR - 1)) #define SPRD_EIC_DBNC_MASK GENMASK(11, 0) /* * The Spreadtrum EIC (external interrupt controller) can be used only in * input mode to generate interrupts if detecting input signals. * * The Spreadtrum digital-chip EIC controller contains 4 sub-modules: * debounce EIC, latch EIC, async EIC and sync EIC, * * The debounce EIC is used to capture the input signals' stable status * (millisecond resolution) and a single-trigger mechanism is introduced * into this sub-module to enhance the input event detection reliability. * The debounce range is from 1ms to 4s with a step size of 1ms. * * The latch EIC is used to latch some special power down signals and * generate interrupts, since the latch EIC does not depend on the APB clock * to capture signals. * * The async EIC uses a 32k clock to capture the short signals (microsecond * resolution) to generate interrupts by level or edge trigger. * * The EIC-sync is similar with GPIO's input function, which is a synchronized * signal input register. */ enum sprd_eic_type { SPRD_EIC_DEBOUNCE, SPRD_EIC_LATCH, SPRD_EIC_ASYNC, SPRD_EIC_SYNC, SPRD_EIC_MAX, }; struct sprd_eic { struct gpio_chip chip; struct notifier_block irq_nb; void __iomem *base[SPRD_EIC_MAX_BANK]; enum sprd_eic_type type; spinlock_t lock; int irq; }; static ATOMIC_NOTIFIER_HEAD(sprd_eic_irq_notifier); static struct sprd_eic *to_sprd_eic(struct notifier_block *nb) { return container_of(nb, struct sprd_eic, irq_nb); } struct sprd_eic_variant_data { enum sprd_eic_type type; u32 num_eics; }; static const char *sprd_eic_label_name[SPRD_EIC_MAX] = { "eic-debounce", "eic-latch", "eic-async", "eic-sync", }; static const struct sprd_eic_variant_data sc9860_eic_dbnc_data = { .type = SPRD_EIC_DEBOUNCE, .num_eics = 8, }; static const struct sprd_eic_variant_data sc9860_eic_latch_data = { .type = SPRD_EIC_LATCH, .num_eics = 8, }; static const struct sprd_eic_variant_data sc9860_eic_async_data = { .type = SPRD_EIC_ASYNC, .num_eics = 8, }; static const struct sprd_eic_variant_data sc9860_eic_sync_data = { .type = SPRD_EIC_SYNC, .num_eics = 8, }; static inline void __iomem *sprd_eic_offset_base(struct sprd_eic *sprd_eic, unsigned int bank) { if (bank >= SPRD_EIC_MAX_BANK) return NULL; return sprd_eic->base[bank]; } static void sprd_eic_update(struct gpio_chip *chip, unsigned int offset, u16 reg, unsigned int val) { struct sprd_eic *sprd_eic = gpiochip_get_data(chip); void __iomem *base = sprd_eic_offset_base(sprd_eic, offset / SPRD_EIC_PER_BANK_NR); unsigned long flags; u32 tmp; spin_lock_irqsave(&sprd_eic->lock, flags); tmp = readl_relaxed(base + reg); if (val) tmp |= BIT(SPRD_EIC_BIT(offset)); else tmp &= ~BIT(SPRD_EIC_BIT(offset)); writel_relaxed(tmp, base + reg); spin_unlock_irqrestore(&sprd_eic->lock, flags); } static int sprd_eic_read(struct gpio_chip *chip, unsigned int offset, u16 reg) { struct sprd_eic *sprd_eic = gpiochip_get_data(chip); void __iomem *base = sprd_eic_offset_base(sprd_eic, offset / SPRD_EIC_PER_BANK_NR); return !!(readl_relaxed(base + reg) & BIT(SPRD_EIC_BIT(offset))); } static int sprd_eic_request(struct gpio_chip *chip, unsigned int offset) { sprd_eic_update(chip, offset, SPRD_EIC_DBNC_DMSK, 1); return 0; } static void sprd_eic_free(struct gpio_chip *chip, unsigned int offset) { sprd_eic_update(chip, offset, SPRD_EIC_DBNC_DMSK, 0); } static int sprd_eic_get(struct gpio_chip *chip, unsigned int offset) { struct sprd_eic *sprd_eic = gpiochip_get_data(chip); switch (sprd_eic->type) { case SPRD_EIC_DEBOUNCE: return sprd_eic_read(chip, offset, SPRD_EIC_DBNC_DATA); case SPRD_EIC_ASYNC: return sprd_eic_read(chip, offset, SPRD_EIC_ASYNC_DATA); case SPRD_EIC_SYNC: return sprd_eic_read(chip, offset, SPRD_EIC_SYNC_DATA); default: return -ENOTSUPP; } } static int sprd_eic_direction_input(struct gpio_chip *chip, unsigned int offset) { /* EICs are always input, nothing need to do here. */ return 0; } static void sprd_eic_set(struct gpio_chip *chip, unsigned int offset, int value) { /* EICs are always input, nothing need to do here. */ } static int sprd_eic_set_debounce(struct gpio_chip *chip, unsigned int offset, unsigned int debounce) { struct sprd_eic *sprd_eic = gpiochip_get_data(chip); void __iomem *base = sprd_eic_offset_base(sprd_eic, offset / SPRD_EIC_PER_BANK_NR); u32 reg = SPRD_EIC_DBNC_CTRL0 + SPRD_EIC_BIT(offset) * 0x4; u32 value = readl_relaxed(base + reg) & ~SPRD_EIC_DBNC_MASK; value |= (debounce / 1000) & SPRD_EIC_DBNC_MASK; writel_relaxed(value, base + reg); return 0; } static int sprd_eic_set_config(struct gpio_chip *chip, unsigned int offset, unsigned long config) { unsigned long param = pinconf_to_config_param(config); u32 arg = pinconf_to_config_argument(config); if (param == PIN_CONFIG_INPUT_DEBOUNCE) return sprd_eic_set_debounce(chip, offset, arg); return -ENOTSUPP; } static void sprd_eic_irq_mask(struct irq_data *data) { struct gpio_chip *chip = irq_data_get_irq_chip_data(data); struct sprd_eic *sprd_eic = gpiochip_get_data(chip); u32 offset = irqd_to_hwirq(data); switch (sprd_eic->type) { case SPRD_EIC_DEBOUNCE: sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IE, 0); sprd_eic_update(chip, offset, SPRD_EIC_DBNC_TRIG, 0); break; case SPRD_EIC_LATCH: sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTEN, 0); break; case SPRD_EIC_ASYNC: sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTIE, 0); break; case SPRD_EIC_SYNC: sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTIE, 0); break; default: dev_err(chip->parent, "Unsupported EIC type.\n"); } gpiochip_disable_irq(chip, offset); } static void sprd_eic_irq_unmask(struct irq_data *data) { struct gpio_chip *chip = irq_data_get_irq_chip_data(data); struct sprd_eic *sprd_eic = gpiochip_get_data(chip); u32 offset = irqd_to_hwirq(data); gpiochip_enable_irq(chip, offset); switch (sprd_eic->type) { case SPRD_EIC_DEBOUNCE: sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IE, 1); sprd_eic_update(chip, offset, SPRD_EIC_DBNC_TRIG, 1); break; case SPRD_EIC_LATCH: sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTEN, 1); break; case SPRD_EIC_ASYNC: sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTIE, 1); break; case SPRD_EIC_SYNC: sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTIE, 1); break; default: dev_err(chip->parent, "Unsupported EIC type.\n"); } } static void sprd_eic_irq_ack(struct irq_data *data) { struct gpio_chip *chip = irq_data_get_irq_chip_data(data); struct sprd_eic *sprd_eic = gpiochip_get_data(chip); u32 offset = irqd_to_hwirq(data); switch (sprd_eic->type) { case SPRD_EIC_DEBOUNCE: sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IC, 1); break; case SPRD_EIC_LATCH: sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTCLR, 1); break; case SPRD_EIC_ASYNC: sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1); break; case SPRD_EIC_SYNC: sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1); break; default: dev_err(chip->parent, "Unsupported EIC type.\n"); } } static int sprd_eic_irq_set_type(struct irq_data *data, unsigned int flow_type) { struct gpio_chip *chip = irq_data_get_irq_chip_data(data); struct sprd_eic *sprd_eic = gpiochip_get_data(chip); u32 offset = irqd_to_hwirq(data); int state; switch (sprd_eic->type) { case SPRD_EIC_DEBOUNCE: switch (flow_type) { case IRQ_TYPE_LEVEL_HIGH: sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 1); break; case IRQ_TYPE_LEVEL_LOW: sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 0); break; case IRQ_TYPE_EDGE_RISING: case IRQ_TYPE_EDGE_FALLING: case IRQ_TYPE_EDGE_BOTH: state = sprd_eic_get(chip, offset); if (state) sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 0); else sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 1); break; default: return -ENOTSUPP; } irq_set_handler_locked(data, handle_level_irq); break; case SPRD_EIC_LATCH: switch (flow_type) { case IRQ_TYPE_LEVEL_HIGH: sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 0); break; case IRQ_TYPE_LEVEL_LOW: sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 1); break; case IRQ_TYPE_EDGE_RISING: case IRQ_TYPE_EDGE_FALLING: case IRQ_TYPE_EDGE_BOTH: state = sprd_eic_get(chip, offset); if (state) sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 0); else sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 1); break; default: return -ENOTSUPP; } irq_set_handler_locked(data, handle_level_irq); break; case SPRD_EIC_ASYNC: switch (flow_type) { case IRQ_TYPE_EDGE_RISING: sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0); sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0); sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 1); irq_set_handler_locked(data, handle_edge_irq); break; case IRQ_TYPE_EDGE_FALLING: sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0); sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0); sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 0); irq_set_handler_locked(data, handle_edge_irq); break; case IRQ_TYPE_EDGE_BOTH: sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0); sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 1); irq_set_handler_locked(data, handle_edge_irq); break; case IRQ_TYPE_LEVEL_HIGH: sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0); sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 1); sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 1); irq_set_handler_locked(data, handle_level_irq); break; case IRQ_TYPE_LEVEL_LOW: sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0); sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 1); sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 0); irq_set_handler_locked(data, handle_level_irq); break; default: return -ENOTSUPP; } break; case SPRD_EIC_SYNC: switch (flow_type) { case IRQ_TYPE_EDGE_RISING: sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0); sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0); sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 1); irq_set_handler_locked(data, handle_edge_irq); break; case IRQ_TYPE_EDGE_FALLING: sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0); sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0); sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 0); irq_set_handler_locked(data, handle_edge_irq); break; case IRQ_TYPE_EDGE_BOTH: sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0); sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 1); irq_set_handler_locked(data, handle_edge_irq); break; case IRQ_TYPE_LEVEL_HIGH: sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0); sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 1); sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 1); irq_set_handler_locked(data, handle_level_irq); break; case IRQ_TYPE_LEVEL_LOW: sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0); sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 1); sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 0); irq_set_handler_locked(data, handle_level_irq); break; default: return -ENOTSUPP; } break; default: dev_err(chip->parent, "Unsupported EIC type.\n"); return -ENOTSUPP; } return 0; } static void sprd_eic_toggle_trigger(struct gpio_chip *chip, unsigned int irq, unsigned int offset) { struct sprd_eic *sprd_eic = gpiochip_get_data(chip); struct irq_data *data = irq_get_irq_data(irq); u32 trigger = irqd_get_trigger_type(data); int state, post_state; /* * The debounce EIC and latch EIC can only support level trigger, so we * can toggle the level trigger to emulate the edge trigger. */ if ((sprd_eic->type != SPRD_EIC_DEBOUNCE && sprd_eic->type != SPRD_EIC_LATCH) || !(trigger & IRQ_TYPE_EDGE_BOTH)) return; sprd_eic_irq_mask(data); state = sprd_eic_get(chip, offset); retry: switch (sprd_eic->type) { case SPRD_EIC_DEBOUNCE: if (state) sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 0); else sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 1); break; case SPRD_EIC_LATCH: if (state) sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 0); else sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 1); break; default: sprd_eic_irq_unmask(data); return; } post_state = sprd_eic_get(chip, offset); if (state != post_state) { dev_warn(chip->parent, "EIC level was changed.\n"); state = post_state; goto retry; } sprd_eic_irq_unmask(data); } static void sprd_eic_handle_one_type(struct gpio_chip *chip) { struct sprd_eic *sprd_eic = gpiochip_get_data(chip); u32 bank, n, girq; for (bank = 0; bank * SPRD_EIC_PER_BANK_NR < chip->ngpio; bank++) { void __iomem *base = sprd_eic_offset_base(sprd_eic, bank); unsigned long reg; switch (sprd_eic->type) { case SPRD_EIC_DEBOUNCE: reg = readl_relaxed(base + SPRD_EIC_DBNC_MIS) & SPRD_EIC_DATA_MASK; break; case SPRD_EIC_LATCH: reg = readl_relaxed(base + SPRD_EIC_LATCH_INTMSK) & SPRD_EIC_DATA_MASK; break; case SPRD_EIC_ASYNC: reg = readl_relaxed(base + SPRD_EIC_ASYNC_INTMSK) & SPRD_EIC_DATA_MASK; break; case SPRD_EIC_SYNC: reg = readl_relaxed(base + SPRD_EIC_SYNC_INTMSK) & SPRD_EIC_DATA_MASK; break; default: dev_err(chip->parent, "Unsupported EIC type.\n"); return; } for_each_set_bit(n, ®, SPRD_EIC_PER_BANK_NR) { u32 offset = bank * SPRD_EIC_PER_BANK_NR + n; girq = irq_find_mapping(chip->irq.domain, offset); generic_handle_irq(girq); sprd_eic_toggle_trigger(chip, girq, offset); } } } static void sprd_eic_irq_handler(struct irq_desc *desc) { struct irq_chip *ic = irq_desc_get_chip(desc); chained_irq_enter(ic, desc); /* * Since the digital-chip EIC 4 sub-modules (debounce, latch, async * and sync) share one same interrupt line, we should notify all of * them to let them check if there are EIC interrupts were triggered. */ atomic_notifier_call_chain(&sprd_eic_irq_notifier, 0, NULL); chained_irq_exit(ic, desc); } static int sprd_eic_irq_notify(struct notifier_block *nb, unsigned long action, void *data) { struct sprd_eic *sprd_eic = to_sprd_eic(nb); sprd_eic_handle_one_type(&sprd_eic->chip); return NOTIFY_OK; } static const struct irq_chip sprd_eic_irq = { .name = "sprd-eic", .irq_ack = sprd_eic_irq_ack, .irq_mask = sprd_eic_irq_mask, .irq_unmask = sprd_eic_irq_unmask, .irq_set_type = sprd_eic_irq_set_type, .flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_IMMUTABLE, GPIOCHIP_IRQ_RESOURCE_HELPERS, }; static void sprd_eic_unregister_notifier(void *data) { struct notifier_block *nb = data; atomic_notifier_chain_unregister(&sprd_eic_irq_notifier, nb); } static int sprd_eic_probe(struct platform_device *pdev) { const struct sprd_eic_variant_data *pdata; struct device *dev = &pdev->dev; struct gpio_irq_chip *irq; struct sprd_eic *sprd_eic; struct resource *res; int ret, i; pdata = of_device_get_match_data(dev); if (!pdata) { dev_err(dev, "No matching driver data found.\n"); return -EINVAL; } sprd_eic = devm_kzalloc(dev, sizeof(*sprd_eic), GFP_KERNEL); if (!sprd_eic) return -ENOMEM; spin_lock_init(&sprd_eic->lock); sprd_eic->type = pdata->type; sprd_eic->irq = platform_get_irq(pdev, 0); if (sprd_eic->irq < 0) return sprd_eic->irq; for (i = 0; i < SPRD_EIC_MAX_BANK; i++) { /* * We can have maximum 3 banks EICs, and each EIC has * its own base address. But some platform maybe only * have one bank EIC, thus base[1] and base[2] can be * optional. */ res = platform_get_resource(pdev, IORESOURCE_MEM, i); if (!res) break; sprd_eic->base[i] = devm_ioremap_resource(dev, res); if (IS_ERR(sprd_eic->base[i])) return PTR_ERR(sprd_eic->base[i]); } sprd_eic->chip.label = sprd_eic_label_name[sprd_eic->type]; sprd_eic->chip.ngpio = pdata->num_eics; sprd_eic->chip.base = -1; sprd_eic->chip.parent = dev; sprd_eic->chip.direction_input = sprd_eic_direction_input; switch (sprd_eic->type) { case SPRD_EIC_DEBOUNCE: sprd_eic->chip.request = sprd_eic_request; sprd_eic->chip.free = sprd_eic_free; sprd_eic->chip.set_config = sprd_eic_set_config; sprd_eic->chip.set = sprd_eic_set; fallthrough; case SPRD_EIC_ASYNC: case SPRD_EIC_SYNC: sprd_eic->chip.get = sprd_eic_get; break; case SPRD_EIC_LATCH: default: break; } irq = &sprd_eic->chip.irq; gpio_irq_chip_set_chip(irq, &sprd_eic_irq); irq->handler = handle_bad_irq; irq->default_type = IRQ_TYPE_NONE; irq->parent_handler = sprd_eic_irq_handler; irq->parent_handler_data = sprd_eic; irq->num_parents = 1; irq->parents = &sprd_eic->irq; ret = devm_gpiochip_add_data(dev, &sprd_eic->chip, sprd_eic); if (ret < 0) { dev_err(dev, "Could not register gpiochip %d.\n", ret); return ret; } sprd_eic->irq_nb.notifier_call = sprd_eic_irq_notify; ret = atomic_notifier_chain_register(&sprd_eic_irq_notifier, &sprd_eic->irq_nb); if (ret) return dev_err_probe(dev, ret, "Failed to register with the interrupt notifier"); return devm_add_action_or_reset(dev, sprd_eic_unregister_notifier, &sprd_eic->irq_nb); } static const struct of_device_id sprd_eic_of_match[] = { { .compatible = "sprd,sc9860-eic-debounce", .data = &sc9860_eic_dbnc_data, }, { .compatible = "sprd,sc9860-eic-latch", .data = &sc9860_eic_latch_data, }, { .compatible = "sprd,sc9860-eic-async", .data = &sc9860_eic_async_data, }, { .compatible = "sprd,sc9860-eic-sync", .data = &sc9860_eic_sync_data, }, { /* end of list */ } }; MODULE_DEVICE_TABLE(of, sprd_eic_of_match); static struct platform_driver sprd_eic_driver = { .probe = sprd_eic_probe, .driver = { .name = "sprd-eic", .of_match_table = sprd_eic_of_match, }, }; module_platform_driver(sprd_eic_driver); MODULE_DESCRIPTION("Spreadtrum EIC driver"); MODULE_LICENSE("GPL v2");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1