Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Kamil Trzciński | 2197 | 99.95% | 1 | 50.00% |
Rob Herring | 1 | 0.05% | 1 | 50.00% |
Total | 2198 | 2 |
// SPDX-License-Identifier: GPL-2.0 /* * Driver for panels based on Himax HX8394 controller, such as: * * - HannStar HSD060BHW4 5.99" MIPI-DSI panel * * Copyright (C) 2021 Kamil Trzciński * * Based on drivers/gpu/drm/panel/panel-sitronix-st7703.c * Copyright (C) Purism SPC 2019 */ #include <linux/delay.h> #include <linux/gpio/consumer.h> #include <linux/media-bus-format.h> #include <linux/mod_devicetable.h> #include <linux/module.h> #include <linux/of.h> #include <linux/regulator/consumer.h> #include <video/mipi_display.h> #include <drm/drm_mipi_dsi.h> #include <drm/drm_modes.h> #include <drm/drm_panel.h> #define DRV_NAME "panel-himax-hx8394" /* Manufacturer specific commands sent via DSI, listed in HX8394-F datasheet */ #define HX8394_CMD_SETSEQUENCE 0xb0 #define HX8394_CMD_SETPOWER 0xb1 #define HX8394_CMD_SETDISP 0xb2 #define HX8394_CMD_SETCYC 0xb4 #define HX8394_CMD_SETVCOM 0xb6 #define HX8394_CMD_SETTE 0xb7 #define HX8394_CMD_SETSENSOR 0xb8 #define HX8394_CMD_SETEXTC 0xb9 #define HX8394_CMD_SETMIPI 0xba #define HX8394_CMD_SETOTP 0xbb #define HX8394_CMD_SETREGBANK 0xbd #define HX8394_CMD_UNKNOWN1 0xc0 #define HX8394_CMD_SETDGCLUT 0xc1 #define HX8394_CMD_SETID 0xc3 #define HX8394_CMD_SETDDB 0xc4 #define HX8394_CMD_UNKNOWN2 0xc6 #define HX8394_CMD_SETCABC 0xc9 #define HX8394_CMD_SETCABCGAIN 0xca #define HX8394_CMD_SETPANEL 0xcc #define HX8394_CMD_SETOFFSET 0xd2 #define HX8394_CMD_SETGIP0 0xd3 #define HX8394_CMD_UNKNOWN3 0xd4 #define HX8394_CMD_SETGIP1 0xd5 #define HX8394_CMD_SETGIP2 0xd6 #define HX8394_CMD_SETGPO 0xd6 #define HX8394_CMD_SETSCALING 0xdd #define HX8394_CMD_SETIDLE 0xdf #define HX8394_CMD_SETGAMMA 0xe0 #define HX8394_CMD_SETCHEMODE_DYN 0xe4 #define HX8394_CMD_SETCHE 0xe5 #define HX8394_CMD_SETCESEL 0xe6 #define HX8394_CMD_SET_SP_CMD 0xe9 #define HX8394_CMD_SETREADINDEX 0xfe #define HX8394_CMD_GETSPIREAD 0xff struct hx8394 { struct device *dev; struct drm_panel panel; struct gpio_desc *reset_gpio; struct regulator *vcc; struct regulator *iovcc; bool prepared; const struct hx8394_panel_desc *desc; }; struct hx8394_panel_desc { const struct drm_display_mode *mode; unsigned int lanes; unsigned long mode_flags; enum mipi_dsi_pixel_format format; int (*init_sequence)(struct hx8394 *ctx); }; static inline struct hx8394 *panel_to_hx8394(struct drm_panel *panel) { return container_of(panel, struct hx8394, panel); } static int hsd060bhw4_init_sequence(struct hx8394 *ctx) { struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); /* 5.19.8 SETEXTC: Set extension command (B9h) */ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETEXTC, 0xff, 0x83, 0x94); /* 5.19.2 SETPOWER: Set power (B1h) */ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETPOWER, 0x48, 0x11, 0x71, 0x09, 0x32, 0x24, 0x71, 0x31, 0x55, 0x30); /* 5.19.9 SETMIPI: Set MIPI control (BAh) */ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETMIPI, 0x63, 0x03, 0x68, 0x6b, 0xb2, 0xc0); /* 5.19.3 SETDISP: Set display related register (B2h) */ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETDISP, 0x00, 0x80, 0x78, 0x0c, 0x07); /* 5.19.4 SETCYC: Set display waveform cycles (B4h) */ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETCYC, 0x12, 0x63, 0x12, 0x63, 0x12, 0x63, 0x01, 0x0c, 0x7c, 0x55, 0x00, 0x3f, 0x12, 0x6b, 0x12, 0x6b, 0x12, 0x6b, 0x01, 0x0c, 0x7c); /* 5.19.19 SETGIP0: Set GIP Option0 (D3h) */ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETGIP0, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x1c, 0x00, 0x00, 0x32, 0x10, 0x09, 0x00, 0x09, 0x32, 0x15, 0xad, 0x05, 0xad, 0x32, 0x00, 0x00, 0x00, 0x00, 0x37, 0x03, 0x0b, 0x0b, 0x37, 0x00, 0x00, 0x00, 0x0c, 0x40); /* 5.19.20 Set GIP Option1 (D5h) */ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETGIP1, 0x19, 0x19, 0x18, 0x18, 0x1b, 0x1b, 0x1a, 0x1a, 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x20, 0x21, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x24, 0x25, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18); /* 5.19.21 Set GIP Option2 (D6h) */ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETGIP2, 0x18, 0x18, 0x19, 0x19, 0x1b, 0x1b, 0x1a, 0x1a, 0x07, 0x06, 0x05, 0x04, 0x03, 0x02, 0x01, 0x00, 0x25, 0x24, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x21, 0x20, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18); /* 5.19.25 SETGAMMA: Set gamma curve related setting (E0h) */ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETGAMMA, 0x00, 0x04, 0x0c, 0x12, 0x14, 0x18, 0x1a, 0x18, 0x31, 0x3f, 0x4d, 0x4c, 0x54, 0x65, 0x6b, 0x70, 0x7f, 0x82, 0x7e, 0x8a, 0x99, 0x4a, 0x48, 0x49, 0x4b, 0x4a, 0x4c, 0x4b, 0x7f, 0x00, 0x04, 0x0c, 0x11, 0x13, 0x17, 0x1a, 0x18, 0x31, 0x3f, 0x4d, 0x4c, 0x54, 0x65, 0x6b, 0x70, 0x7f, 0x82, 0x7e, 0x8a, 0x99, 0x4a, 0x48, 0x49, 0x4b, 0x4a, 0x4c, 0x4b, 0x7f); /* 5.19.17 SETPANEL (CCh) */ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETPANEL, 0x0b); /* Unknown command, not listed in the HX8394-F datasheet */ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN1, 0x1f, 0x31); /* 5.19.5 SETVCOM: Set VCOM voltage (B6h) */ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETVCOM, 0x7d, 0x7d); /* Unknown command, not listed in the HX8394-F datasheet */ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN3, 0x02); /* 5.19.11 Set register bank (BDh) */ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETREGBANK, 0x01); /* 5.19.2 SETPOWER: Set power (B1h) */ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETPOWER, 0x00); /* 5.19.11 Set register bank (BDh) */ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETREGBANK, 0x00); /* Unknown command, not listed in the HX8394-F datasheet */ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN3, 0xed); return 0; } static const struct drm_display_mode hsd060bhw4_mode = { .hdisplay = 720, .hsync_start = 720 + 40, .hsync_end = 720 + 40 + 46, .htotal = 720 + 40 + 46 + 40, .vdisplay = 1440, .vsync_start = 1440 + 9, .vsync_end = 1440 + 9 + 7, .vtotal = 1440 + 9 + 7 + 7, .clock = 74250, .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, .width_mm = 68, .height_mm = 136, }; static const struct hx8394_panel_desc hsd060bhw4_desc = { .mode = &hsd060bhw4_mode, .lanes = 4, .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST, .format = MIPI_DSI_FMT_RGB888, .init_sequence = hsd060bhw4_init_sequence, }; static int hx8394_enable(struct drm_panel *panel) { struct hx8394 *ctx = panel_to_hx8394(panel); struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); int ret; ret = ctx->desc->init_sequence(ctx); if (ret) { dev_err(ctx->dev, "Panel init sequence failed: %d\n", ret); return ret; } ret = mipi_dsi_dcs_exit_sleep_mode(dsi); if (ret) { dev_err(ctx->dev, "Failed to exit sleep mode: %d\n", ret); return ret; } /* Panel is operational 120 msec after reset */ msleep(120); ret = mipi_dsi_dcs_set_display_on(dsi); if (ret) { dev_err(ctx->dev, "Failed to turn on the display: %d\n", ret); goto sleep_in; } return 0; sleep_in: /* This will probably fail, but let's try orderly power off anyway. */ ret = mipi_dsi_dcs_enter_sleep_mode(dsi); if (!ret) msleep(50); return ret; } static int hx8394_disable(struct drm_panel *panel) { struct hx8394 *ctx = panel_to_hx8394(panel); struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); int ret; ret = mipi_dsi_dcs_enter_sleep_mode(dsi); if (ret) { dev_err(ctx->dev, "Failed to enter sleep mode: %d\n", ret); return ret; } msleep(50); /* about 3 frames */ return 0; } static int hx8394_unprepare(struct drm_panel *panel) { struct hx8394 *ctx = panel_to_hx8394(panel); if (!ctx->prepared) return 0; gpiod_set_value_cansleep(ctx->reset_gpio, 1); regulator_disable(ctx->iovcc); regulator_disable(ctx->vcc); ctx->prepared = false; return 0; } static int hx8394_prepare(struct drm_panel *panel) { struct hx8394 *ctx = panel_to_hx8394(panel); int ret; if (ctx->prepared) return 0; gpiod_set_value_cansleep(ctx->reset_gpio, 1); ret = regulator_enable(ctx->vcc); if (ret) { dev_err(ctx->dev, "Failed to enable vcc supply: %d\n", ret); return ret; } ret = regulator_enable(ctx->iovcc); if (ret) { dev_err(ctx->dev, "Failed to enable iovcc supply: %d\n", ret); goto disable_vcc; } gpiod_set_value_cansleep(ctx->reset_gpio, 0); msleep(180); ctx->prepared = true; return 0; disable_vcc: gpiod_set_value_cansleep(ctx->reset_gpio, 1); regulator_disable(ctx->vcc); return ret; } static int hx8394_get_modes(struct drm_panel *panel, struct drm_connector *connector) { struct hx8394 *ctx = panel_to_hx8394(panel); struct drm_display_mode *mode; mode = drm_mode_duplicate(connector->dev, ctx->desc->mode); if (!mode) { dev_err(ctx->dev, "Failed to add mode %ux%u@%u\n", ctx->desc->mode->hdisplay, ctx->desc->mode->vdisplay, drm_mode_vrefresh(ctx->desc->mode)); return -ENOMEM; } drm_mode_set_name(mode); mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; connector->display_info.width_mm = mode->width_mm; connector->display_info.height_mm = mode->height_mm; drm_mode_probed_add(connector, mode); return 1; } static const struct drm_panel_funcs hx8394_drm_funcs = { .disable = hx8394_disable, .unprepare = hx8394_unprepare, .prepare = hx8394_prepare, .enable = hx8394_enable, .get_modes = hx8394_get_modes, }; static int hx8394_probe(struct mipi_dsi_device *dsi) { struct device *dev = &dsi->dev; struct hx8394 *ctx; int ret; ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); if (!ctx) return -ENOMEM; ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); if (IS_ERR(ctx->reset_gpio)) return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio), "Failed to get reset gpio\n"); mipi_dsi_set_drvdata(dsi, ctx); ctx->dev = dev; ctx->desc = of_device_get_match_data(dev); dsi->mode_flags = ctx->desc->mode_flags; dsi->format = ctx->desc->format; dsi->lanes = ctx->desc->lanes; ctx->vcc = devm_regulator_get(dev, "vcc"); if (IS_ERR(ctx->vcc)) return dev_err_probe(dev, PTR_ERR(ctx->vcc), "Failed to request vcc regulator\n"); ctx->iovcc = devm_regulator_get(dev, "iovcc"); if (IS_ERR(ctx->iovcc)) return dev_err_probe(dev, PTR_ERR(ctx->iovcc), "Failed to request iovcc regulator\n"); drm_panel_init(&ctx->panel, dev, &hx8394_drm_funcs, DRM_MODE_CONNECTOR_DSI); ret = drm_panel_of_backlight(&ctx->panel); if (ret) return ret; drm_panel_add(&ctx->panel); ret = mipi_dsi_attach(dsi); if (ret < 0) { dev_err_probe(dev, ret, "mipi_dsi_attach failed\n"); drm_panel_remove(&ctx->panel); return ret; } dev_dbg(dev, "%ux%u@%u %ubpp dsi %udl - ready\n", ctx->desc->mode->hdisplay, ctx->desc->mode->vdisplay, drm_mode_vrefresh(ctx->desc->mode), mipi_dsi_pixel_format_to_bpp(dsi->format), dsi->lanes); return 0; } static void hx8394_shutdown(struct mipi_dsi_device *dsi) { struct hx8394 *ctx = mipi_dsi_get_drvdata(dsi); int ret; ret = drm_panel_disable(&ctx->panel); if (ret < 0) dev_err(&dsi->dev, "Failed to disable panel: %d\n", ret); ret = drm_panel_unprepare(&ctx->panel); if (ret < 0) dev_err(&dsi->dev, "Failed to unprepare panel: %d\n", ret); } static void hx8394_remove(struct mipi_dsi_device *dsi) { struct hx8394 *ctx = mipi_dsi_get_drvdata(dsi); int ret; hx8394_shutdown(dsi); ret = mipi_dsi_detach(dsi); if (ret < 0) dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret); drm_panel_remove(&ctx->panel); } static const struct of_device_id hx8394_of_match[] = { { .compatible = "hannstar,hsd060bhw4", .data = &hsd060bhw4_desc }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, hx8394_of_match); static struct mipi_dsi_driver hx8394_driver = { .probe = hx8394_probe, .remove = hx8394_remove, .shutdown = hx8394_shutdown, .driver = { .name = DRV_NAME, .of_match_table = hx8394_of_match, }, }; module_mipi_dsi_driver(hx8394_driver); MODULE_AUTHOR("Kamil Trzciński <ayufan@ayufan.eu>"); MODULE_DESCRIPTION("DRM driver for Himax HX8394 based MIPI DSI panels"); MODULE_LICENSE("GPL");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1