Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Vadim Pasternak | 1868 | 98.47% | 1 | 12.50% |
Guenter Roeck | 23 | 1.21% | 2 | 25.00% |
Thomas Gleixner | 2 | 0.11% | 1 | 12.50% |
Rob Herring | 1 | 0.05% | 1 | 12.50% |
Krzysztof Kozlowski | 1 | 0.05% | 1 | 12.50% |
Gustavo A. R. Silva | 1 | 0.05% | 1 | 12.50% |
Uwe Kleine-König | 1 | 0.05% | 1 | 12.50% |
Total | 1897 | 8 |
// SPDX-License-Identifier: GPL-2.0-or-later /* * Hardware monitoring driver for Maxim MAX6621 * * Copyright (c) 2017 Mellanox Technologies. All rights reserved. * Copyright (c) 2017 Vadim Pasternak <vadimp@mellanox.com> */ #include <linux/bitops.h> #include <linux/hwmon.h> #include <linux/hwmon-sysfs.h> #include <linux/i2c.h> #include <linux/init.h> #include <linux/module.h> #include <linux/of.h> #include <linux/regmap.h> #define MAX6621_DRV_NAME "max6621" #define MAX6621_TEMP_INPUT_REG_NUM 9 #define MAX6621_TEMP_INPUT_MIN -127000 #define MAX6621_TEMP_INPUT_MAX 128000 #define MAX6621_TEMP_ALERT_CHAN_SHIFT 1 #define MAX6621_TEMP_S0D0_REG 0x00 #define MAX6621_TEMP_S0D1_REG 0x01 #define MAX6621_TEMP_S1D0_REG 0x02 #define MAX6621_TEMP_S1D1_REG 0x03 #define MAX6621_TEMP_S2D0_REG 0x04 #define MAX6621_TEMP_S2D1_REG 0x05 #define MAX6621_TEMP_S3D0_REG 0x06 #define MAX6621_TEMP_S3D1_REG 0x07 #define MAX6621_TEMP_MAX_REG 0x08 #define MAX6621_TEMP_MAX_ADDR_REG 0x0a #define MAX6621_TEMP_ALERT_CAUSE_REG 0x0b #define MAX6621_CONFIG0_REG 0x0c #define MAX6621_CONFIG1_REG 0x0d #define MAX6621_CONFIG2_REG 0x0e #define MAX6621_CONFIG3_REG 0x0f #define MAX6621_TEMP_S0_ALERT_REG 0x10 #define MAX6621_TEMP_S1_ALERT_REG 0x11 #define MAX6621_TEMP_S2_ALERT_REG 0x12 #define MAX6621_TEMP_S3_ALERT_REG 0x13 #define MAX6621_CLEAR_ALERT_REG 0x15 #define MAX6621_REG_MAX (MAX6621_CLEAR_ALERT_REG + 1) #define MAX6621_REG_TEMP_SHIFT 0x06 #define MAX6621_ENABLE_TEMP_ALERTS_BIT 4 #define MAX6621_ENABLE_I2C_CRC_BIT 5 #define MAX6621_ENABLE_ALTERNATE_DATA 6 #define MAX6621_ENABLE_LOCKUP_TO 7 #define MAX6621_ENABLE_S0D0_BIT 8 #define MAX6621_ENABLE_S3D1_BIT 15 #define MAX6621_ENABLE_TEMP_ALL GENMASK(MAX6621_ENABLE_S3D1_BIT, \ MAX6621_ENABLE_S0D0_BIT) #define MAX6621_POLL_DELAY_MASK 0x5 #define MAX6621_CONFIG0_INIT (MAX6621_ENABLE_TEMP_ALL | \ BIT(MAX6621_ENABLE_LOCKUP_TO) | \ BIT(MAX6621_ENABLE_I2C_CRC_BIT) | \ MAX6621_POLL_DELAY_MASK) #define MAX6621_PECI_BIT_TIME 0x2 #define MAX6621_PECI_RETRY_NUM 0x3 #define MAX6621_CONFIG1_INIT ((MAX6621_PECI_BIT_TIME << 8) | \ MAX6621_PECI_RETRY_NUM) /* Error codes */ #define MAX6621_TRAN_FAILED 0x8100 /* * PECI transaction failed for more * than the configured number of * consecutive retries. */ #define MAX6621_POOL_DIS 0x8101 /* * Polling disabled for requested * socket/domain. */ #define MAX6621_POOL_UNCOMPLETE 0x8102 /* * First poll not yet completed for * requested socket/domain (on * startup). */ #define MAX6621_SD_DIS 0x8103 /* * Read maximum temperature requested, * but no sockets/domains enabled or * all enabled sockets/domains have * errors; or read maximum temperature * address requested, but read maximum * temperature was not called. */ #define MAX6621_ALERT_DIS 0x8104 /* * Get alert socket/domain requested, * but no alert active. */ #define MAX6621_PECI_ERR_MIN 0x8000 /* Intel spec PECI error min value. */ #define MAX6621_PECI_ERR_MAX 0x80ff /* Intel spec PECI error max value. */ static const u32 max6621_temp_regs[] = { MAX6621_TEMP_MAX_REG, MAX6621_TEMP_S0D0_REG, MAX6621_TEMP_S1D0_REG, MAX6621_TEMP_S2D0_REG, MAX6621_TEMP_S3D0_REG, MAX6621_TEMP_S0D1_REG, MAX6621_TEMP_S1D1_REG, MAX6621_TEMP_S2D1_REG, MAX6621_TEMP_S3D1_REG, }; static const char *const max6621_temp_labels[] = { "maximum", "socket0_0", "socket1_0", "socket2_0", "socket3_0", "socket0_1", "socket1_1", "socket2_1", "socket3_1", }; static const int max6621_temp_alert_chan2reg[] = { MAX6621_TEMP_S0_ALERT_REG, MAX6621_TEMP_S1_ALERT_REG, MAX6621_TEMP_S2_ALERT_REG, MAX6621_TEMP_S3_ALERT_REG, }; /** * struct max6621_data - private data: * * @client: I2C client; * @regmap: register map handle; * @input_chan2reg: mapping from channel to register; */ struct max6621_data { struct i2c_client *client; struct regmap *regmap; int input_chan2reg[MAX6621_TEMP_INPUT_REG_NUM + 1]; }; static long max6621_temp_mc2reg(long val) { return (val / 1000L) << MAX6621_REG_TEMP_SHIFT; } static umode_t max6621_is_visible(const void *data, enum hwmon_sensor_types type, u32 attr, int channel) { /* Skip channels which are not physically conncted. */ if (((struct max6621_data *)data)->input_chan2reg[channel] < 0) return 0; switch (type) { case hwmon_temp: switch (attr) { case hwmon_temp_input: case hwmon_temp_label: case hwmon_temp_crit_alarm: return 0444; case hwmon_temp_offset: case hwmon_temp_crit: return 0644; default: break; } break; default: break; } return 0; } static int max6621_verify_reg_data(struct device *dev, int regval) { if (regval >= MAX6621_PECI_ERR_MIN && regval <= MAX6621_PECI_ERR_MAX) { dev_dbg(dev, "PECI error code - err 0x%04x.\n", regval); return -EIO; } switch (regval) { case MAX6621_TRAN_FAILED: dev_dbg(dev, "PECI transaction failed - err 0x%04x.\n", regval); return -EIO; case MAX6621_POOL_DIS: dev_dbg(dev, "Polling disabled - err 0x%04x.\n", regval); return -EOPNOTSUPP; case MAX6621_POOL_UNCOMPLETE: dev_dbg(dev, "First poll not completed on startup - err 0x%04x.\n", regval); return -EIO; case MAX6621_SD_DIS: dev_dbg(dev, "Resource is disabled - err 0x%04x.\n", regval); return -EOPNOTSUPP; case MAX6621_ALERT_DIS: dev_dbg(dev, "No alert active - err 0x%04x.\n", regval); return -EOPNOTSUPP; default: return 0; } } static int max6621_read(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel, long *val) { struct max6621_data *data = dev_get_drvdata(dev); u32 regval; int reg; s8 temp; int ret; switch (type) { case hwmon_temp: switch (attr) { case hwmon_temp_input: reg = data->input_chan2reg[channel]; ret = regmap_read(data->regmap, reg, ®val); if (ret) return ret; ret = max6621_verify_reg_data(dev, regval); if (ret) return ret; /* * Bit MAX6621_REG_TEMP_SHIFT represents 1 degree step. * The temperature is given in two's complement and 8 * bits is used for the register conversion. */ temp = (regval >> MAX6621_REG_TEMP_SHIFT); *val = temp * 1000L; break; case hwmon_temp_offset: ret = regmap_read(data->regmap, MAX6621_CONFIG2_REG, ®val); if (ret) return ret; ret = max6621_verify_reg_data(dev, regval); if (ret) return ret; *val = (regval >> MAX6621_REG_TEMP_SHIFT) * 1000L; break; case hwmon_temp_crit: channel -= MAX6621_TEMP_ALERT_CHAN_SHIFT; reg = max6621_temp_alert_chan2reg[channel]; ret = regmap_read(data->regmap, reg, ®val); if (ret) return ret; ret = max6621_verify_reg_data(dev, regval); if (ret) return ret; *val = regval * 1000L; break; case hwmon_temp_crit_alarm: /* * Set val to zero to recover the case, when reading * MAX6621_TEMP_ALERT_CAUSE_REG results in for example * MAX6621_ALERT_DIS. Reading will return with error, * but in such case alarm should be returned as 0. */ *val = 0; ret = regmap_read(data->regmap, MAX6621_TEMP_ALERT_CAUSE_REG, ®val); if (ret) return ret; ret = max6621_verify_reg_data(dev, regval); if (ret) { /* Do not report error if alert is disabled. */ if (regval == MAX6621_ALERT_DIS) return 0; else return ret; } /* * Clear the alert automatically, using send-byte * smbus protocol for clearing alert. */ if (regval) { ret = i2c_smbus_write_byte(data->client, MAX6621_CLEAR_ALERT_REG); if (ret) return ret; } *val = !!regval; break; default: return -EOPNOTSUPP; } break; default: return -EOPNOTSUPP; } return 0; } static int max6621_write(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel, long val) { struct max6621_data *data = dev_get_drvdata(dev); u32 reg; switch (type) { case hwmon_temp: switch (attr) { case hwmon_temp_offset: /* Clamp to allowed range to prevent overflow. */ val = clamp_val(val, MAX6621_TEMP_INPUT_MIN, MAX6621_TEMP_INPUT_MAX); val = max6621_temp_mc2reg(val); return regmap_write(data->regmap, MAX6621_CONFIG2_REG, val); case hwmon_temp_crit: channel -= MAX6621_TEMP_ALERT_CHAN_SHIFT; reg = max6621_temp_alert_chan2reg[channel]; /* Clamp to allowed range to prevent overflow. */ val = clamp_val(val, MAX6621_TEMP_INPUT_MIN, MAX6621_TEMP_INPUT_MAX); val = val / 1000L; return regmap_write(data->regmap, reg, val); default: return -EOPNOTSUPP; } break; default: return -EOPNOTSUPP; } return -EOPNOTSUPP; } static int max6621_read_string(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel, const char **str) { switch (type) { case hwmon_temp: switch (attr) { case hwmon_temp_label: *str = max6621_temp_labels[channel]; return 0; default: return -EOPNOTSUPP; } break; default: return -EOPNOTSUPP; } return -EOPNOTSUPP; } static bool max6621_writeable_reg(struct device *dev, unsigned int reg) { switch (reg) { case MAX6621_CONFIG0_REG: case MAX6621_CONFIG1_REG: case MAX6621_CONFIG2_REG: case MAX6621_CONFIG3_REG: case MAX6621_TEMP_S0_ALERT_REG: case MAX6621_TEMP_S1_ALERT_REG: case MAX6621_TEMP_S2_ALERT_REG: case MAX6621_TEMP_S3_ALERT_REG: case MAX6621_TEMP_ALERT_CAUSE_REG: return true; } return false; } static bool max6621_readable_reg(struct device *dev, unsigned int reg) { switch (reg) { case MAX6621_TEMP_S0D0_REG: case MAX6621_TEMP_S0D1_REG: case MAX6621_TEMP_S1D0_REG: case MAX6621_TEMP_S1D1_REG: case MAX6621_TEMP_S2D0_REG: case MAX6621_TEMP_S2D1_REG: case MAX6621_TEMP_S3D0_REG: case MAX6621_TEMP_S3D1_REG: case MAX6621_TEMP_MAX_REG: case MAX6621_TEMP_MAX_ADDR_REG: case MAX6621_CONFIG0_REG: case MAX6621_CONFIG1_REG: case MAX6621_CONFIG2_REG: case MAX6621_CONFIG3_REG: case MAX6621_TEMP_S0_ALERT_REG: case MAX6621_TEMP_S1_ALERT_REG: case MAX6621_TEMP_S2_ALERT_REG: case MAX6621_TEMP_S3_ALERT_REG: return true; } return false; } static bool max6621_volatile_reg(struct device *dev, unsigned int reg) { switch (reg) { case MAX6621_TEMP_S0D0_REG: case MAX6621_TEMP_S0D1_REG: case MAX6621_TEMP_S1D0_REG: case MAX6621_TEMP_S1D1_REG: case MAX6621_TEMP_S2D0_REG: case MAX6621_TEMP_S2D1_REG: case MAX6621_TEMP_S3D0_REG: case MAX6621_TEMP_S3D1_REG: case MAX6621_TEMP_MAX_REG: case MAX6621_TEMP_S0_ALERT_REG: case MAX6621_TEMP_S1_ALERT_REG: case MAX6621_TEMP_S2_ALERT_REG: case MAX6621_TEMP_S3_ALERT_REG: case MAX6621_TEMP_ALERT_CAUSE_REG: return true; } return false; } static const struct reg_default max6621_regmap_default[] = { { MAX6621_CONFIG0_REG, MAX6621_CONFIG0_INIT }, { MAX6621_CONFIG1_REG, MAX6621_CONFIG1_INIT }, }; static const struct regmap_config max6621_regmap_config = { .reg_bits = 8, .val_bits = 16, .max_register = MAX6621_REG_MAX, .val_format_endian = REGMAP_ENDIAN_LITTLE, .cache_type = REGCACHE_FLAT, .writeable_reg = max6621_writeable_reg, .readable_reg = max6621_readable_reg, .volatile_reg = max6621_volatile_reg, .reg_defaults = max6621_regmap_default, .num_reg_defaults = ARRAY_SIZE(max6621_regmap_default), }; static const struct hwmon_channel_info * const max6621_info[] = { HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ), HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_OFFSET, HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_CRIT_ALARM | HWMON_T_LABEL, HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_CRIT_ALARM | HWMON_T_LABEL, HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_CRIT_ALARM | HWMON_T_LABEL, HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_CRIT_ALARM | HWMON_T_LABEL, HWMON_T_INPUT | HWMON_T_LABEL, HWMON_T_INPUT | HWMON_T_LABEL, HWMON_T_INPUT | HWMON_T_LABEL, HWMON_T_INPUT | HWMON_T_LABEL), NULL }; static const struct hwmon_ops max6621_hwmon_ops = { .read = max6621_read, .write = max6621_write, .read_string = max6621_read_string, .is_visible = max6621_is_visible, }; static const struct hwmon_chip_info max6621_chip_info = { .ops = &max6621_hwmon_ops, .info = max6621_info, }; static int max6621_probe(struct i2c_client *client) { struct device *dev = &client->dev; struct max6621_data *data; struct device *hwmon_dev; int i; int ret; data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); if (!data) return -ENOMEM; data->regmap = devm_regmap_init_i2c(client, &max6621_regmap_config); if (IS_ERR(data->regmap)) return PTR_ERR(data->regmap); i2c_set_clientdata(client, data); data->client = client; /* Set CONFIG0 register masking temperature alerts and PEC. */ ret = regmap_write(data->regmap, MAX6621_CONFIG0_REG, MAX6621_CONFIG0_INIT); if (ret) return ret; /* Set CONFIG1 register for PEC access retry number. */ ret = regmap_write(data->regmap, MAX6621_CONFIG1_REG, MAX6621_CONFIG1_INIT); if (ret) return ret; /* Sync registers with hardware. */ regcache_mark_dirty(data->regmap); ret = regcache_sync(data->regmap); if (ret) return ret; /* Verify which temperature input registers are enabled. */ for (i = 0; i < MAX6621_TEMP_INPUT_REG_NUM; i++) { ret = i2c_smbus_read_word_data(client, max6621_temp_regs[i]); if (ret < 0) return ret; ret = max6621_verify_reg_data(dev, ret); if (ret) { data->input_chan2reg[i] = -1; continue; } data->input_chan2reg[i] = max6621_temp_regs[i]; } hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name, data, &max6621_chip_info, NULL); return PTR_ERR_OR_ZERO(hwmon_dev); } static const struct i2c_device_id max6621_id[] = { { MAX6621_DRV_NAME, 0 }, { } }; MODULE_DEVICE_TABLE(i2c, max6621_id); static const struct of_device_id __maybe_unused max6621_of_match[] = { { .compatible = "maxim,max6621" }, { } }; MODULE_DEVICE_TABLE(of, max6621_of_match); static struct i2c_driver max6621_driver = { .class = I2C_CLASS_HWMON, .driver = { .name = MAX6621_DRV_NAME, .of_match_table = of_match_ptr(max6621_of_match), }, .probe = max6621_probe, .id_table = max6621_id, }; module_i2c_driver(max6621_driver); MODULE_AUTHOR("Vadim Pasternak <vadimp@mellanox.com>"); MODULE_DESCRIPTION("Driver for Maxim MAX6621"); MODULE_LICENSE("GPL");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1