Contributors: 26
Author Tokens Token Proportion Commits Commit Proportion
Peter Milne 1195 57.93% 2 5.41%
Deepak Saxena 586 28.41% 2 5.41%
Linus Walleij 108 5.24% 4 10.81%
Russell King 23 1.11% 3 8.11%
Kevin Hilman 20 0.97% 1 2.70%
Dave Jiang 18 0.87% 1 2.70%
David Vrabel 17 0.82% 1 2.70%
Krzysztof Kozlowski 16 0.78% 1 2.70%
Arnaud Patard 10 0.48% 2 5.41%
Lennert Buytenhek 10 0.48% 1 2.70%
Martin Michlmayr 9 0.44% 1 2.70%
Alexander Shiyan 8 0.39% 1 2.70%
Bartlomiej Zolnierkiewicz 8 0.39% 1 2.70%
Rob Herring 6 0.29% 2 5.41%
Kay Sievers 5 0.24% 1 2.70%
Greg Kroah-Hartman 4 0.19% 1 2.70%
Jean Delvare 4 0.19% 3 8.11%
Wolfram Sang 3 0.15% 1 2.70%
Laurent Riffard 3 0.15% 1 2.70%
Thomas Gleixner 2 0.10% 1 2.70%
Uwe Kleine-König 2 0.10% 1 2.70%
Axel Lin 2 0.10% 1 2.70%
Sergey Shtylyov 1 0.05% 1 2.70%
Mickey Stein 1 0.05% 1 2.70%
H Hartley Sweeten 1 0.05% 1 2.70%
Dan J Williams 1 0.05% 1 2.70%
Total 2063 37 


// SPDX-License-Identifier: GPL-2.0-only
/* ------------------------------------------------------------------------- */
/* i2c-iop3xx.c i2c driver algorithms for Intel XScale IOP3xx & IXP46x       */
/* ------------------------------------------------------------------------- */
/* Copyright (C) 2003 Peter Milne, D-TACQ Solutions Ltd
 *                    <Peter dot Milne at D hyphen TACQ dot com>
 *
 * With acknowledgements to i2c-algo-ibm_ocp.c by
 * Ian DaSilva, MontaVista Software, Inc. idasilva@mvista.com
 *
 * And i2c-algo-pcf.c, which was created by Simon G. Vogl and Hans Berglund:
 *
 * Copyright (C) 1995-1997 Simon G. Vogl, 1998-2000 Hans Berglund
 *
 * And which acknowledged Kyösti Mälkki <kmalkki@cc.hut.fi>,
 * Frodo Looijaard <frodol@dds.nl>, Martin Bailey<mbailey@littlefeet-inc.com>
 *
 * Major cleanup by Deepak Saxena <dsaxena@plexity.net>, 01/2005:
 *
 * - Use driver model to pass per-chip info instead of hardcoding and #ifdefs
 * - Use ioremap/__raw_readl/__raw_writel instead of direct dereference
 * - Make it work with IXP46x chips
 * - Cleanup function names, coding style, etc
 *
 * - writing to slave address causes latchup on iop331.
 *	fix: driver refuses to address self.
 */

#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <linux/io.h>
#include <linux/gpio/consumer.h>

#include "i2c-iop3xx.h"

/* global unit counter */
static int i2c_id;

static inline unsigned char
iic_cook_addr(struct i2c_msg *msg)
{
	unsigned char addr;

	addr = i2c_8bit_addr_from_msg(msg);

	return addr;
}

static void
iop3xx_i2c_reset(struct i2c_algo_iop3xx_data *iop3xx_adap)
{
	/* Follows devman 9.3 */
	__raw_writel(IOP3XX_ICR_UNIT_RESET, iop3xx_adap->ioaddr + CR_OFFSET);
	__raw_writel(IOP3XX_ISR_CLEARBITS, iop3xx_adap->ioaddr + SR_OFFSET);
	__raw_writel(0, iop3xx_adap->ioaddr + CR_OFFSET);
}

static void
iop3xx_i2c_enable(struct i2c_algo_iop3xx_data *iop3xx_adap)
{
	u32 cr = IOP3XX_ICR_GCD | IOP3XX_ICR_SCLEN | IOP3XX_ICR_UE;

	/*
	 * Every time unit enable is asserted, GPOD needs to be cleared
	 * on IOP3XX to avoid data corruption on the bus. We use the
	 * gpiod_set_raw_value() to make sure the 0 hits the hardware
	 * GPOD register. These descriptors are only passed along to
	 * the device if this is necessary.
	 */
	if (iop3xx_adap->gpio_scl)
		gpiod_set_raw_value(iop3xx_adap->gpio_scl, 0);
	if (iop3xx_adap->gpio_sda)
		gpiod_set_raw_value(iop3xx_adap->gpio_sda, 0);

	/* NB SR bits not same position as CR IE bits :-( */
	iop3xx_adap->SR_enabled =
		IOP3XX_ISR_ALD | IOP3XX_ISR_BERRD |
		IOP3XX_ISR_RXFULL | IOP3XX_ISR_TXEMPTY;

	cr |= IOP3XX_ICR_ALD_IE | IOP3XX_ICR_BERR_IE |
		IOP3XX_ICR_RXFULL_IE | IOP3XX_ICR_TXEMPTY_IE;

	__raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET);
}

static void
iop3xx_i2c_transaction_cleanup(struct i2c_algo_iop3xx_data *iop3xx_adap)
{
	unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET);

	cr &= ~(IOP3XX_ICR_MSTART | IOP3XX_ICR_TBYTE |
		IOP3XX_ICR_MSTOP | IOP3XX_ICR_SCLEN);

	__raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET);
}

/*
 * NB: the handler has to clear the source of the interrupt!
 * Then it passes the SR flags of interest to BH via adap data
 */
static irqreturn_t
iop3xx_i2c_irq_handler(int this_irq, void *dev_id)
{
	struct i2c_algo_iop3xx_data *iop3xx_adap = dev_id;
	u32 sr = __raw_readl(iop3xx_adap->ioaddr + SR_OFFSET);

	if ((sr &= iop3xx_adap->SR_enabled)) {
		__raw_writel(sr, iop3xx_adap->ioaddr + SR_OFFSET);
		iop3xx_adap->SR_received |= sr;
		wake_up_interruptible(&iop3xx_adap->waitq);
	}
	return IRQ_HANDLED;
}

/* check all error conditions, clear them , report most important */
static int
iop3xx_i2c_error(u32 sr)
{
	int rc = 0;

	if ((sr & IOP3XX_ISR_BERRD)) {
		if (!rc)
			rc = -I2C_ERR_BERR;
	}
	if ((sr & IOP3XX_ISR_ALD)) {
		if (!rc)
			rc = -I2C_ERR_ALD;
	}
	return rc;
}

static inline u32
iop3xx_i2c_get_srstat(struct i2c_algo_iop3xx_data *iop3xx_adap)
{
	unsigned long flags;
	u32 sr;

	spin_lock_irqsave(&iop3xx_adap->lock, flags);
	sr = iop3xx_adap->SR_received;
	iop3xx_adap->SR_received = 0;
	spin_unlock_irqrestore(&iop3xx_adap->lock, flags);

	return sr;
}

/*
 * sleep until interrupted, then recover and analyse the SR
 * saved by handler
 */
typedef int (*compare_func)(unsigned test, unsigned mask);
/* returns 1 on correct comparison */

static int
iop3xx_i2c_wait_event(struct i2c_algo_iop3xx_data *iop3xx_adap,
			  unsigned flags, unsigned *status,
			  compare_func compare)
{
	unsigned sr = 0;
	int interrupted;
	int done;
	int rc = 0;

	do {
		interrupted = wait_event_interruptible_timeout (
			iop3xx_adap->waitq,
			(done = compare(sr = iop3xx_i2c_get_srstat(iop3xx_adap), flags)),
			1 * HZ
			);
		if ((rc = iop3xx_i2c_error(sr)) < 0) {
			*status = sr;
			return rc;
		} else if (!interrupted) {
			*status = sr;
			return -ETIMEDOUT;
		}
	} while (!done);

	*status = sr;

	return 0;
}

/*
 * Concrete compare_funcs
 */
static int
all_bits_clear(unsigned test, unsigned mask)
{
	return (test & mask) == 0;
}

static int
any_bits_set(unsigned test, unsigned mask)
{
	return (test & mask) != 0;
}

static int
iop3xx_i2c_wait_tx_done(struct i2c_algo_iop3xx_data *iop3xx_adap, int *status)
{
	return iop3xx_i2c_wait_event(
		iop3xx_adap,
		IOP3XX_ISR_TXEMPTY | IOP3XX_ISR_ALD | IOP3XX_ISR_BERRD,
		status, any_bits_set);
}

static int
iop3xx_i2c_wait_rx_done(struct i2c_algo_iop3xx_data *iop3xx_adap, int *status)
{
	return iop3xx_i2c_wait_event(
		iop3xx_adap,
		IOP3XX_ISR_RXFULL | IOP3XX_ISR_ALD | IOP3XX_ISR_BERRD,
		status,	any_bits_set);
}

static int
iop3xx_i2c_wait_idle(struct i2c_algo_iop3xx_data *iop3xx_adap, int *status)
{
	return iop3xx_i2c_wait_event(
		iop3xx_adap, IOP3XX_ISR_UNITBUSY, status, all_bits_clear);
}

static int
iop3xx_i2c_send_target_addr(struct i2c_algo_iop3xx_data *iop3xx_adap,
				struct i2c_msg *msg)
{
	unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET);
	int status;
	int rc;

	/* avoid writing to my slave address (hangs on 80331),
	 * forbidden in Intel developer manual
	 */
	if (msg->addr == MYSAR) {
		return -EBUSY;
	}

	__raw_writel(iic_cook_addr(msg), iop3xx_adap->ioaddr + DBR_OFFSET);

	cr &= ~(IOP3XX_ICR_MSTOP | IOP3XX_ICR_NACK);
	cr |= IOP3XX_ICR_MSTART | IOP3XX_ICR_TBYTE;

	__raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET);
	rc = iop3xx_i2c_wait_tx_done(iop3xx_adap, &status);

	return rc;
}

static int
iop3xx_i2c_write_byte(struct i2c_algo_iop3xx_data *iop3xx_adap, char byte,
				int stop)
{
	unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET);
	int status;
	int rc = 0;

	__raw_writel(byte, iop3xx_adap->ioaddr + DBR_OFFSET);
	cr &= ~IOP3XX_ICR_MSTART;
	if (stop) {
		cr |= IOP3XX_ICR_MSTOP;
	} else {
		cr &= ~IOP3XX_ICR_MSTOP;
	}
	cr |= IOP3XX_ICR_TBYTE;
	__raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET);
	rc = iop3xx_i2c_wait_tx_done(iop3xx_adap, &status);

	return rc;
}

static int
iop3xx_i2c_read_byte(struct i2c_algo_iop3xx_data *iop3xx_adap, char *byte,
				int stop)
{
	unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET);
	int status;
	int rc = 0;

	cr &= ~IOP3XX_ICR_MSTART;

	if (stop) {
		cr |= IOP3XX_ICR_MSTOP | IOP3XX_ICR_NACK;
	} else {
		cr &= ~(IOP3XX_ICR_MSTOP | IOP3XX_ICR_NACK);
	}
	cr |= IOP3XX_ICR_TBYTE;
	__raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET);

	rc = iop3xx_i2c_wait_rx_done(iop3xx_adap, &status);

	*byte = __raw_readl(iop3xx_adap->ioaddr + DBR_OFFSET);

	return rc;
}

static int
iop3xx_i2c_writebytes(struct i2c_adapter *i2c_adap, const char *buf, int count)
{
	struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data;
	int ii;
	int rc = 0;

	for (ii = 0; rc == 0 && ii != count; ++ii)
		rc = iop3xx_i2c_write_byte(iop3xx_adap, buf[ii], ii == count-1);
	return rc;
}

static int
iop3xx_i2c_readbytes(struct i2c_adapter *i2c_adap, char *buf, int count)
{
	struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data;
	int ii;
	int rc = 0;

	for (ii = 0; rc == 0 && ii != count; ++ii)
		rc = iop3xx_i2c_read_byte(iop3xx_adap, &buf[ii], ii == count-1);

	return rc;
}

/*
 * Description:  This function implements combined transactions.  Combined
 * transactions consist of combinations of reading and writing blocks of data.
 * FROM THE SAME ADDRESS
 * Each transfer (i.e. a read or a write) is separated by a repeated start
 * condition.
 */
static int
iop3xx_i2c_handle_msg(struct i2c_adapter *i2c_adap, struct i2c_msg *pmsg)
{
	struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data;
	int rc;

	rc = iop3xx_i2c_send_target_addr(iop3xx_adap, pmsg);
	if (rc < 0) {
		return rc;
	}

	if ((pmsg->flags&I2C_M_RD)) {
		return iop3xx_i2c_readbytes(i2c_adap, pmsg->buf, pmsg->len);
	} else {
		return iop3xx_i2c_writebytes(i2c_adap, pmsg->buf, pmsg->len);
	}
}

/*
 * master_xfer() - main read/write entry
 */
static int
iop3xx_i2c_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs,
				int num)
{
	struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data;
	int im = 0;
	int ret = 0;
	int status;

	iop3xx_i2c_wait_idle(iop3xx_adap, &status);
	iop3xx_i2c_reset(iop3xx_adap);
	iop3xx_i2c_enable(iop3xx_adap);

	for (im = 0; ret == 0 && im != num; im++) {
		ret = iop3xx_i2c_handle_msg(i2c_adap, &msgs[im]);
	}

	iop3xx_i2c_transaction_cleanup(iop3xx_adap);

	if (ret)
		return ret;

	return im;
}

static u32
iop3xx_i2c_func(struct i2c_adapter *adap)
{
	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
}

static const struct i2c_algorithm iop3xx_i2c_algo = {
	.master_xfer	= iop3xx_i2c_master_xfer,
	.functionality	= iop3xx_i2c_func,
};

static void
iop3xx_i2c_remove(struct platform_device *pdev)
{
	struct i2c_adapter *padapter = platform_get_drvdata(pdev);
	struct i2c_algo_iop3xx_data *adapter_data =
		(struct i2c_algo_iop3xx_data *)padapter->algo_data;
	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	unsigned long cr = __raw_readl(adapter_data->ioaddr + CR_OFFSET);

	/*
	 * Disable the actual HW unit
	 */
	cr &= ~(IOP3XX_ICR_ALD_IE | IOP3XX_ICR_BERR_IE |
		IOP3XX_ICR_RXFULL_IE | IOP3XX_ICR_TXEMPTY_IE);
	__raw_writel(cr, adapter_data->ioaddr + CR_OFFSET);

	iounmap(adapter_data->ioaddr);
	release_mem_region(res->start, IOP3XX_I2C_IO_SIZE);
	kfree(adapter_data);
	kfree(padapter);
}

static int
iop3xx_i2c_probe(struct platform_device *pdev)
{
	struct resource *res;
	int ret, irq;
	struct i2c_adapter *new_adapter;
	struct i2c_algo_iop3xx_data *adapter_data;

	new_adapter = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL);
	if (!new_adapter) {
		ret = -ENOMEM;
		goto out;
	}

	adapter_data = kzalloc(sizeof(struct i2c_algo_iop3xx_data), GFP_KERNEL);
	if (!adapter_data) {
		ret = -ENOMEM;
		goto free_adapter;
	}

	adapter_data->gpio_scl = devm_gpiod_get_optional(&pdev->dev,
							 "scl",
							 GPIOD_ASIS);
	if (IS_ERR(adapter_data->gpio_scl)) {
		ret = PTR_ERR(adapter_data->gpio_scl);
		goto free_both;
	}
	adapter_data->gpio_sda = devm_gpiod_get_optional(&pdev->dev,
							 "sda",
							 GPIOD_ASIS);
	if (IS_ERR(adapter_data->gpio_sda)) {
		ret = PTR_ERR(adapter_data->gpio_sda);
		goto free_both;
	}

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	if (!res) {
		ret = -ENODEV;
		goto free_both;
	}

	if (!request_mem_region(res->start, IOP3XX_I2C_IO_SIZE, pdev->name)) {
		ret = -EBUSY;
		goto free_both;
	}

	/* set the adapter enumeration # */
	adapter_data->id = i2c_id++;

	adapter_data->ioaddr = ioremap(res->start, IOP3XX_I2C_IO_SIZE);
	if (!adapter_data->ioaddr) {
		ret = -ENOMEM;
		goto release_region;
	}

	irq = platform_get_irq(pdev, 0);
	if (irq < 0) {
		ret = irq;
		goto unmap;
	}
	ret = request_irq(irq, iop3xx_i2c_irq_handler, 0,
				pdev->name, adapter_data);

	if (ret)
		goto unmap;

	memcpy(new_adapter->name, pdev->name, strlen(pdev->name));
	new_adapter->owner = THIS_MODULE;
	new_adapter->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
	new_adapter->dev.parent = &pdev->dev;
	new_adapter->dev.of_node = pdev->dev.of_node;
	new_adapter->nr = pdev->id;

	/*
	 * Default values...should these come in from board code?
	 */
	new_adapter->timeout = HZ;
	new_adapter->algo = &iop3xx_i2c_algo;

	init_waitqueue_head(&adapter_data->waitq);
	spin_lock_init(&adapter_data->lock);

	iop3xx_i2c_reset(adapter_data);
	iop3xx_i2c_enable(adapter_data);

	platform_set_drvdata(pdev, new_adapter);
	new_adapter->algo_data = adapter_data;

	i2c_add_numbered_adapter(new_adapter);

	return 0;

unmap:
	iounmap(adapter_data->ioaddr);

release_region:
	release_mem_region(res->start, IOP3XX_I2C_IO_SIZE);

free_both:
	kfree(adapter_data);

free_adapter:
	kfree(new_adapter);

out:
	return ret;
}

static const struct of_device_id i2c_iop3xx_match[] = {
	{ .compatible = "intel,iop3xx-i2c", },
	{ .compatible = "intel,ixp4xx-i2c", },
	{},
};
MODULE_DEVICE_TABLE(of, i2c_iop3xx_match);

static struct platform_driver iop3xx_i2c_driver = {
	.probe		= iop3xx_i2c_probe,
	.remove_new	= iop3xx_i2c_remove,
	.driver		= {
		.name	= "IOP3xx-I2C",
		.of_match_table = i2c_iop3xx_match,
	},
};

module_platform_driver(iop3xx_i2c_driver);

MODULE_AUTHOR("D-TACQ Solutions Ltd <www.d-tacq.com>");
MODULE_DESCRIPTION("IOP3xx iic algorithm and driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:IOP3xx-I2C");