| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Eugene Zaikonnikov | 1350 | 99.85% | 1 | 33.33% |
| Uwe Kleine-König | 2 | 0.15% | 2 | 66.67% |
| Total | 1352 | 3 |
// SPDX-License-Identifier: GPL-2.0+ /* * hdc2010.c - Support for the TI HDC2010 and HDC2080 * temperature + relative humidity sensors * * Copyright (C) 2020 Norphonic AS * Author: Eugene Zaikonnikov <ez@norphonic.com> * * Datasheet: https://www.ti.com/product/HDC2010/datasheet * Datasheet: https://www.ti.com/product/HDC2080/datasheet */ #include <linux/module.h> #include <linux/init.h> #include <linux/i2c.h> #include <linux/bitops.h> #include <linux/iio/iio.h> #include <linux/iio/sysfs.h> #define HDC2010_REG_TEMP_LOW 0x00 #define HDC2010_REG_TEMP_HIGH 0x01 #define HDC2010_REG_HUMIDITY_LOW 0x02 #define HDC2010_REG_HUMIDITY_HIGH 0x03 #define HDC2010_REG_INTERRUPT_DRDY 0x04 #define HDC2010_REG_TEMP_MAX 0x05 #define HDC2010_REG_HUMIDITY_MAX 0x06 #define HDC2010_REG_INTERRUPT_EN 0x07 #define HDC2010_REG_TEMP_OFFSET_ADJ 0x08 #define HDC2010_REG_HUMIDITY_OFFSET_ADJ 0x09 #define HDC2010_REG_TEMP_THR_L 0x0a #define HDC2010_REG_TEMP_THR_H 0x0b #define HDC2010_REG_RH_THR_L 0x0c #define HDC2010_REG_RH_THR_H 0x0d #define HDC2010_REG_RESET_DRDY_INT_CONF 0x0e #define HDC2010_REG_MEASUREMENT_CONF 0x0f #define HDC2010_MEAS_CONF GENMASK(2, 1) #define HDC2010_MEAS_TRIG BIT(0) #define HDC2010_HEATER_EN BIT(3) #define HDC2010_AMM GENMASK(6, 4) struct hdc2010_data { struct i2c_client *client; struct mutex lock; u8 measurement_config; u8 interrupt_config; u8 drdy_config; }; enum hdc2010_addr_groups { HDC2010_GROUP_TEMP = 0, HDC2010_GROUP_HUMIDITY, }; struct hdc2010_reg_record { unsigned long primary; unsigned long peak; }; static const struct hdc2010_reg_record hdc2010_reg_translation[] = { [HDC2010_GROUP_TEMP] = { .primary = HDC2010_REG_TEMP_LOW, .peak = HDC2010_REG_TEMP_MAX, }, [HDC2010_GROUP_HUMIDITY] = { .primary = HDC2010_REG_HUMIDITY_LOW, .peak = HDC2010_REG_HUMIDITY_MAX, }, }; static IIO_CONST_ATTR(out_current_heater_raw_available, "0 1"); static struct attribute *hdc2010_attributes[] = { &iio_const_attr_out_current_heater_raw_available.dev_attr.attr, NULL }; static const struct attribute_group hdc2010_attribute_group = { .attrs = hdc2010_attributes, }; static const struct iio_chan_spec hdc2010_channels[] = { { .type = IIO_TEMP, .address = HDC2010_GROUP_TEMP, .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_PEAK) | BIT(IIO_CHAN_INFO_OFFSET) | BIT(IIO_CHAN_INFO_SCALE), }, { .type = IIO_HUMIDITYRELATIVE, .address = HDC2010_GROUP_HUMIDITY, .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_PEAK) | BIT(IIO_CHAN_INFO_SCALE), }, { .type = IIO_CURRENT, .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), .extend_name = "heater", .output = 1, }, }; static int hdc2010_update_drdy_config(struct hdc2010_data *data, char mask, char val) { u8 tmp = (~mask & data->drdy_config) | val; int ret; ret = i2c_smbus_write_byte_data(data->client, HDC2010_REG_RESET_DRDY_INT_CONF, tmp); if (ret) return ret; data->drdy_config = tmp; return 0; } static int hdc2010_get_prim_measurement_word(struct hdc2010_data *data, struct iio_chan_spec const *chan) { struct i2c_client *client = data->client; s32 ret; ret = i2c_smbus_read_word_data(client, hdc2010_reg_translation[chan->address].primary); if (ret < 0) dev_err(&client->dev, "Could not read sensor measurement word\n"); return ret; } static int hdc2010_get_peak_measurement_byte(struct hdc2010_data *data, struct iio_chan_spec const *chan) { struct i2c_client *client = data->client; s32 ret; ret = i2c_smbus_read_byte_data(client, hdc2010_reg_translation[chan->address].peak); if (ret < 0) dev_err(&client->dev, "Could not read sensor measurement byte\n"); return ret; } static int hdc2010_get_heater_status(struct hdc2010_data *data) { return !!(data->drdy_config & HDC2010_HEATER_EN); } static int hdc2010_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val, int *val2, long mask) { struct hdc2010_data *data = iio_priv(indio_dev); switch (mask) { case IIO_CHAN_INFO_RAW: { int ret; if (chan->type == IIO_CURRENT) { *val = hdc2010_get_heater_status(data); return IIO_VAL_INT; } ret = iio_device_claim_direct_mode(indio_dev); if (ret) return ret; mutex_lock(&data->lock); ret = hdc2010_get_prim_measurement_word(data, chan); mutex_unlock(&data->lock); iio_device_release_direct_mode(indio_dev); if (ret < 0) return ret; *val = ret; return IIO_VAL_INT; } case IIO_CHAN_INFO_PEAK: { int ret; ret = iio_device_claim_direct_mode(indio_dev); if (ret) return ret; mutex_lock(&data->lock); ret = hdc2010_get_peak_measurement_byte(data, chan); mutex_unlock(&data->lock); iio_device_release_direct_mode(indio_dev); if (ret < 0) return ret; /* Scaling up the value so we can use same offset as RAW */ *val = ret * 256; return IIO_VAL_INT; } case IIO_CHAN_INFO_SCALE: *val2 = 65536; if (chan->type == IIO_TEMP) *val = 165000; else *val = 100000; return IIO_VAL_FRACTIONAL; case IIO_CHAN_INFO_OFFSET: *val = -15887; *val2 = 515151; return IIO_VAL_INT_PLUS_MICRO; default: return -EINVAL; } } static int hdc2010_write_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int val, int val2, long mask) { struct hdc2010_data *data = iio_priv(indio_dev); int new, ret; switch (mask) { case IIO_CHAN_INFO_RAW: if (chan->type != IIO_CURRENT || val2 != 0) return -EINVAL; switch (val) { case 1: new = HDC2010_HEATER_EN; break; case 0: new = 0; break; default: return -EINVAL; } mutex_lock(&data->lock); ret = hdc2010_update_drdy_config(data, HDC2010_HEATER_EN, new); mutex_unlock(&data->lock); return ret; default: return -EINVAL; } } static const struct iio_info hdc2010_info = { .read_raw = hdc2010_read_raw, .write_raw = hdc2010_write_raw, .attrs = &hdc2010_attribute_group, }; static int hdc2010_probe(struct i2c_client *client) { struct iio_dev *indio_dev; struct hdc2010_data *data; u8 tmp; int ret; if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_I2C)) return -EOPNOTSUPP; indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); if (!indio_dev) return -ENOMEM; data = iio_priv(indio_dev); i2c_set_clientdata(client, indio_dev); data->client = client; mutex_init(&data->lock); /* * As DEVICE ID register does not differentiate between * HDC2010 and HDC2080, we have the name hardcoded */ indio_dev->name = "hdc2010"; indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->info = &hdc2010_info; indio_dev->channels = hdc2010_channels; indio_dev->num_channels = ARRAY_SIZE(hdc2010_channels); /* Enable Automatic Measurement Mode at 5Hz */ ret = hdc2010_update_drdy_config(data, HDC2010_AMM, HDC2010_AMM); if (ret) return ret; /* * We enable both temp and humidity measurement. * However the measurement won't start even in AMM until triggered. */ tmp = (data->measurement_config & ~HDC2010_MEAS_CONF) | HDC2010_MEAS_TRIG; ret = i2c_smbus_write_byte_data(client, HDC2010_REG_MEASUREMENT_CONF, tmp); if (ret) { dev_warn(&client->dev, "Unable to set up measurement\n"); if (hdc2010_update_drdy_config(data, HDC2010_AMM, 0)) dev_warn(&client->dev, "Unable to restore default AMM\n"); return ret; } data->measurement_config = tmp; return iio_device_register(indio_dev); } static void hdc2010_remove(struct i2c_client *client) { struct iio_dev *indio_dev = i2c_get_clientdata(client); struct hdc2010_data *data = iio_priv(indio_dev); iio_device_unregister(indio_dev); /* Disable Automatic Measurement Mode */ if (hdc2010_update_drdy_config(data, HDC2010_AMM, 0)) dev_warn(&client->dev, "Unable to restore default AMM\n"); } static const struct i2c_device_id hdc2010_id[] = { { "hdc2010" }, { "hdc2080" }, { } }; MODULE_DEVICE_TABLE(i2c, hdc2010_id); static const struct of_device_id hdc2010_dt_ids[] = { { .compatible = "ti,hdc2010" }, { .compatible = "ti,hdc2080" }, { } }; MODULE_DEVICE_TABLE(of, hdc2010_dt_ids); static struct i2c_driver hdc2010_driver = { .driver = { .name = "hdc2010", .of_match_table = hdc2010_dt_ids, }, .probe = hdc2010_probe, .remove = hdc2010_remove, .id_table = hdc2010_id, }; module_i2c_driver(hdc2010_driver); MODULE_AUTHOR("Eugene Zaikonnikov <ez@norphonic.com>"); MODULE_DESCRIPTION("TI HDC2010 humidity and temperature sensor driver"); MODULE_LICENSE("GPL");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1