Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Benjamin Herrenschmidt | 980 | 98.79% | 1 | 16.67% |
Andrew Jeffery | 6 | 0.60% | 1 | 16.67% |
Ingo Molnar | 2 | 0.20% | 1 | 16.67% |
Thomas Gleixner | 2 | 0.20% | 1 | 16.67% |
Mark Rutland | 1 | 0.10% | 1 | 16.67% |
Tobias Klauser | 1 | 0.10% | 1 | 16.67% |
Total | 992 | 6 |
// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (C) 2015 - Ben Herrenschmidt, IBM Corp. * * Driver for Aspeed "new" VIC as found in SoC generation 3 and later * * Based on irq-vic.c: * * Copyright (C) 1999 - 2003 ARM Limited * Copyright (C) 2000 Deep Blue Solutions Ltd */ #include <linux/export.h> #include <linux/init.h> #include <linux/list.h> #include <linux/io.h> #include <linux/irq.h> #include <linux/irqchip.h> #include <linux/irqchip/chained_irq.h> #include <linux/irqdomain.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/syscore_ops.h> #include <linux/device.h> #include <linux/slab.h> #include <asm/exception.h> #include <asm/irq.h> /* These definitions correspond to the "new mapping" of the * register set that interleaves "high" and "low". The offsets * below are for the "low" register, add 4 to get to the high one */ #define AVIC_IRQ_STATUS 0x00 #define AVIC_FIQ_STATUS 0x08 #define AVIC_RAW_STATUS 0x10 #define AVIC_INT_SELECT 0x18 #define AVIC_INT_ENABLE 0x20 #define AVIC_INT_ENABLE_CLR 0x28 #define AVIC_INT_TRIGGER 0x30 #define AVIC_INT_TRIGGER_CLR 0x38 #define AVIC_INT_SENSE 0x40 #define AVIC_INT_DUAL_EDGE 0x48 #define AVIC_INT_EVENT 0x50 #define AVIC_EDGE_CLR 0x58 #define AVIC_EDGE_STATUS 0x60 #define NUM_IRQS 64 struct aspeed_vic { void __iomem *base; u32 edge_sources[2]; struct irq_domain *dom; }; static struct aspeed_vic *system_avic; static void vic_init_hw(struct aspeed_vic *vic) { u32 sense; /* Disable all interrupts */ writel(0xffffffff, vic->base + AVIC_INT_ENABLE_CLR); writel(0xffffffff, vic->base + AVIC_INT_ENABLE_CLR + 4); /* Make sure no soft trigger is on */ writel(0xffffffff, vic->base + AVIC_INT_TRIGGER_CLR); writel(0xffffffff, vic->base + AVIC_INT_TRIGGER_CLR + 4); /* Set everything to be IRQ */ writel(0, vic->base + AVIC_INT_SELECT); writel(0, vic->base + AVIC_INT_SELECT + 4); /* Some interrupts have a programmable high/low level trigger * (4 GPIO direct inputs), for now we assume this was configured * by firmware. We read which ones are edge now. */ sense = readl(vic->base + AVIC_INT_SENSE); vic->edge_sources[0] = ~sense; sense = readl(vic->base + AVIC_INT_SENSE + 4); vic->edge_sources[1] = ~sense; /* Clear edge detection latches */ writel(0xffffffff, vic->base + AVIC_EDGE_CLR); writel(0xffffffff, vic->base + AVIC_EDGE_CLR + 4); } static void __exception_irq_entry avic_handle_irq(struct pt_regs *regs) { struct aspeed_vic *vic = system_avic; u32 stat, irq; for (;;) { irq = 0; stat = readl_relaxed(vic->base + AVIC_IRQ_STATUS); if (!stat) { stat = readl_relaxed(vic->base + AVIC_IRQ_STATUS + 4); irq = 32; } if (stat == 0) break; irq += ffs(stat) - 1; generic_handle_domain_irq(vic->dom, irq); } } static void avic_ack_irq(struct irq_data *d) { struct aspeed_vic *vic = irq_data_get_irq_chip_data(d); unsigned int sidx = d->hwirq >> 5; unsigned int sbit = 1u << (d->hwirq & 0x1f); /* Clear edge latch for edge interrupts, nop for level */ if (vic->edge_sources[sidx] & sbit) writel(sbit, vic->base + AVIC_EDGE_CLR + sidx * 4); } static void avic_mask_irq(struct irq_data *d) { struct aspeed_vic *vic = irq_data_get_irq_chip_data(d); unsigned int sidx = d->hwirq >> 5; unsigned int sbit = 1u << (d->hwirq & 0x1f); writel(sbit, vic->base + AVIC_INT_ENABLE_CLR + sidx * 4); } static void avic_unmask_irq(struct irq_data *d) { struct aspeed_vic *vic = irq_data_get_irq_chip_data(d); unsigned int sidx = d->hwirq >> 5; unsigned int sbit = 1u << (d->hwirq & 0x1f); writel(sbit, vic->base + AVIC_INT_ENABLE + sidx * 4); } /* For level irq, faster than going through a nop "ack" and mask */ static void avic_mask_ack_irq(struct irq_data *d) { struct aspeed_vic *vic = irq_data_get_irq_chip_data(d); unsigned int sidx = d->hwirq >> 5; unsigned int sbit = 1u << (d->hwirq & 0x1f); /* First mask */ writel(sbit, vic->base + AVIC_INT_ENABLE_CLR + sidx * 4); /* Then clear edge latch for edge interrupts */ if (vic->edge_sources[sidx] & sbit) writel(sbit, vic->base + AVIC_EDGE_CLR + sidx * 4); } static struct irq_chip avic_chip = { .name = "AVIC", .irq_ack = avic_ack_irq, .irq_mask = avic_mask_irq, .irq_unmask = avic_unmask_irq, .irq_mask_ack = avic_mask_ack_irq, }; static int avic_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hwirq) { struct aspeed_vic *vic = d->host_data; unsigned int sidx = hwirq >> 5; unsigned int sbit = 1u << (hwirq & 0x1f); /* Check if interrupt exists */ if (sidx > 1) return -EPERM; if (vic->edge_sources[sidx] & sbit) irq_set_chip_and_handler(irq, &avic_chip, handle_edge_irq); else irq_set_chip_and_handler(irq, &avic_chip, handle_level_irq); irq_set_chip_data(irq, vic); irq_set_probe(irq); return 0; } static const struct irq_domain_ops avic_dom_ops = { .map = avic_map, .xlate = irq_domain_xlate_onetwocell, }; static int __init avic_of_init(struct device_node *node, struct device_node *parent) { void __iomem *regs; struct aspeed_vic *vic; if (WARN(parent, "non-root Aspeed VIC not supported")) return -EINVAL; if (WARN(system_avic, "duplicate Aspeed VIC not supported")) return -EINVAL; regs = of_iomap(node, 0); if (WARN_ON(!regs)) return -EIO; vic = kzalloc(sizeof(struct aspeed_vic), GFP_KERNEL); if (WARN_ON(!vic)) { iounmap(regs); return -ENOMEM; } vic->base = regs; /* Initialize sources, all masked */ vic_init_hw(vic); /* Ready to receive interrupts */ system_avic = vic; set_handle_irq(avic_handle_irq); /* Register our domain */ vic->dom = irq_domain_add_simple(node, NUM_IRQS, 0, &avic_dom_ops, vic); return 0; } IRQCHIP_DECLARE(ast2400_vic, "aspeed,ast2400-vic", avic_of_init); IRQCHIP_DECLARE(ast2500_vic, "aspeed,ast2500-vic", avic_of_init);
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1