Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Yauhen Kharuzhy | 1809 | 82.49% | 1 | 14.29% |
Hans de Goede | 383 | 17.46% | 5 | 71.43% |
Li Yang | 1 | 0.05% | 1 | 14.29% |
Total | 2193 | 7 |
// SPDX-License-Identifier: GPL-2.0 /* * Driver for LEDs connected to the Intel Cherry Trail Whiskey Cove PMIC * * Copyright 2019 Yauhen Kharuzhy <jekhor@gmail.com> * Copyright 2023 Hans de Goede <hansg@kernel.org> * * Register info comes from the Lenovo Yoga Book Android opensource code * available from Lenovo. File lenovo_yb1_x90f_l_osc_201803.7z path in the 7z: * YB1_source_code/kernel/cht/drivers/misc/charger_gp_led.c */ #include <linux/kernel.h> #include <linux/leds.h> #include <linux/mfd/intel_soc_pmic.h> #include <linux/module.h> #include <linux/mod_devicetable.h> #include <linux/platform_device.h> #include <linux/regmap.h> #include <linux/suspend.h> #define CHT_WC_LED1_CTRL 0x5e1f #define CHT_WC_LED1_FSM 0x5e20 #define CHT_WC_LED1_PWM 0x5e21 #define CHT_WC_LED2_CTRL 0x4fdf #define CHT_WC_LED2_FSM 0x4fe0 #define CHT_WC_LED2_PWM 0x4fe1 #define CHT_WC_LED1_SWCTL BIT(0) /* HW or SW control of charging led */ #define CHT_WC_LED1_ON BIT(1) #define CHT_WC_LED2_ON BIT(0) #define CHT_WC_LED_I_MA2_5 (2 << 2) /* LED current limit */ #define CHT_WC_LED_I_MASK GENMASK(3, 2) /* LED current limit mask */ #define CHT_WC_LED_F_1_4_HZ (0 << 4) #define CHT_WC_LED_F_1_2_HZ (1 << 4) #define CHT_WC_LED_F_1_HZ (2 << 4) #define CHT_WC_LED_F_2_HZ (3 << 4) #define CHT_WC_LED_F_MASK GENMASK(5, 4) #define CHT_WC_LED_EFF_OFF (0 << 1) #define CHT_WC_LED_EFF_ON (1 << 1) #define CHT_WC_LED_EFF_BLINKING (2 << 1) #define CHT_WC_LED_EFF_BREATHING (3 << 1) #define CHT_WC_LED_EFF_MASK GENMASK(2, 1) #define CHT_WC_LED_COUNT 2 struct cht_wc_led_regs { /* Register addresses */ u16 ctrl; u16 fsm; u16 pwm; /* Mask + values for turning the LED on/off */ u8 on_off_mask; u8 on_val; u8 off_val; }; struct cht_wc_led_saved_regs { unsigned int ctrl; unsigned int fsm; unsigned int pwm; }; struct cht_wc_led { struct led_classdev cdev; const struct cht_wc_led_regs *regs; struct regmap *regmap; struct mutex mutex; struct cht_wc_led_saved_regs saved_regs; }; struct cht_wc_leds { struct cht_wc_led leds[CHT_WC_LED_COUNT]; /* Saved LED1 initial register values */ struct cht_wc_led_saved_regs led1_initial_regs; }; static const struct cht_wc_led_regs cht_wc_led_regs[CHT_WC_LED_COUNT] = { { .ctrl = CHT_WC_LED1_CTRL, .fsm = CHT_WC_LED1_FSM, .pwm = CHT_WC_LED1_PWM, .on_off_mask = CHT_WC_LED1_SWCTL | CHT_WC_LED1_ON, .on_val = CHT_WC_LED1_SWCTL | CHT_WC_LED1_ON, .off_val = CHT_WC_LED1_SWCTL, }, { .ctrl = CHT_WC_LED2_CTRL, .fsm = CHT_WC_LED2_FSM, .pwm = CHT_WC_LED2_PWM, .on_off_mask = CHT_WC_LED2_ON, .on_val = CHT_WC_LED2_ON, .off_val = 0, }, }; static const char * const cht_wc_leds_names[CHT_WC_LED_COUNT] = { "platform::" LED_FUNCTION_CHARGING, "platform::" LED_FUNCTION_INDICATOR, }; static int cht_wc_leds_brightness_set(struct led_classdev *cdev, enum led_brightness value) { struct cht_wc_led *led = container_of(cdev, struct cht_wc_led, cdev); int ret; mutex_lock(&led->mutex); if (!value) { ret = regmap_update_bits(led->regmap, led->regs->ctrl, led->regs->on_off_mask, led->regs->off_val); if (ret < 0) { dev_err(cdev->dev, "Failed to turn off: %d\n", ret); goto out; } /* Disable HW blinking */ ret = regmap_update_bits(led->regmap, led->regs->fsm, CHT_WC_LED_EFF_MASK, CHT_WC_LED_EFF_ON); if (ret < 0) dev_err(cdev->dev, "Failed to update LED FSM reg: %d\n", ret); } else { ret = regmap_write(led->regmap, led->regs->pwm, value); if (ret < 0) { dev_err(cdev->dev, "Failed to set brightness: %d\n", ret); goto out; } ret = regmap_update_bits(led->regmap, led->regs->ctrl, led->regs->on_off_mask, led->regs->on_val); if (ret < 0) dev_err(cdev->dev, "Failed to turn on: %d\n", ret); } out: mutex_unlock(&led->mutex); return ret; } static enum led_brightness cht_wc_leds_brightness_get(struct led_classdev *cdev) { struct cht_wc_led *led = container_of(cdev, struct cht_wc_led, cdev); unsigned int val; int ret; mutex_lock(&led->mutex); ret = regmap_read(led->regmap, led->regs->ctrl, &val); if (ret < 0) { dev_err(cdev->dev, "Failed to read LED CTRL reg: %d\n", ret); ret = 0; goto done; } val &= led->regs->on_off_mask; if (val != led->regs->on_val) { ret = 0; goto done; } ret = regmap_read(led->regmap, led->regs->pwm, &val); if (ret < 0) { dev_err(cdev->dev, "Failed to read LED PWM reg: %d\n", ret); ret = 0; goto done; } ret = val; done: mutex_unlock(&led->mutex); return ret; } /* Return blinking period for given CTRL reg value */ static unsigned long cht_wc_leds_get_period(int ctrl) { ctrl &= CHT_WC_LED_F_MASK; switch (ctrl) { case CHT_WC_LED_F_1_4_HZ: return 1000 * 4; case CHT_WC_LED_F_1_2_HZ: return 1000 * 2; case CHT_WC_LED_F_1_HZ: return 1000; case CHT_WC_LED_F_2_HZ: return 1000 / 2; } return 0; } /* * Find suitable hardware blink mode for given period. * period < 750 ms - select 2 HZ * 750 ms <= period < 1500 ms - select 1 HZ * 1500 ms <= period < 3000 ms - select 1/2 HZ * 3000 ms <= period < 5000 ms - select 1/4 HZ * 5000 ms <= period - return -1 */ static int cht_wc_leds_find_freq(unsigned long period) { if (period < 750) return CHT_WC_LED_F_2_HZ; else if (period < 1500) return CHT_WC_LED_F_1_HZ; else if (period < 3000) return CHT_WC_LED_F_1_2_HZ; else if (period < 5000) return CHT_WC_LED_F_1_4_HZ; else return -1; } static int cht_wc_leds_set_effect(struct led_classdev *cdev, unsigned long *delay_on, unsigned long *delay_off, u8 effect) { struct cht_wc_led *led = container_of(cdev, struct cht_wc_led, cdev); int ctrl, ret; mutex_lock(&led->mutex); /* Blink with 1 Hz as default if nothing specified */ if (!*delay_on && !*delay_off) *delay_on = *delay_off = 500; ctrl = cht_wc_leds_find_freq(*delay_on + *delay_off); if (ctrl < 0) { /* Disable HW blinking */ ret = regmap_update_bits(led->regmap, led->regs->fsm, CHT_WC_LED_EFF_MASK, CHT_WC_LED_EFF_ON); if (ret < 0) dev_err(cdev->dev, "Failed to update LED FSM reg: %d\n", ret); /* Fallback to software timer */ *delay_on = *delay_off = 0; ret = -EINVAL; goto done; } ret = regmap_update_bits(led->regmap, led->regs->fsm, CHT_WC_LED_EFF_MASK, effect); if (ret < 0) dev_err(cdev->dev, "Failed to update LED FSM reg: %d\n", ret); /* Set the frequency and make sure the LED is on */ ret = regmap_update_bits(led->regmap, led->regs->ctrl, CHT_WC_LED_F_MASK | led->regs->on_off_mask, ctrl | led->regs->on_val); if (ret < 0) dev_err(cdev->dev, "Failed to update LED CTRL reg: %d\n", ret); *delay_off = *delay_on = cht_wc_leds_get_period(ctrl) / 2; done: mutex_unlock(&led->mutex); return ret; } static int cht_wc_leds_blink_set(struct led_classdev *cdev, unsigned long *delay_on, unsigned long *delay_off) { u8 effect = CHT_WC_LED_EFF_BLINKING; /* * The desired default behavior of LED1 / the charge LED is breathing * while charging and on/solid when full. Since triggers cannot select * breathing, blink_set() gets called when charging. Use slow breathing * when the default "charging-blink-full-solid" trigger is used to * achieve the desired default behavior. */ if (cdev->flags & LED_INIT_DEFAULT_TRIGGER) { *delay_on = *delay_off = 1000; effect = CHT_WC_LED_EFF_BREATHING; } return cht_wc_leds_set_effect(cdev, delay_on, delay_off, effect); } static int cht_wc_leds_pattern_set(struct led_classdev *cdev, struct led_pattern *pattern, u32 len, int repeat) { unsigned long delay_off, delay_on; if (repeat > 0 || len != 2 || pattern[0].brightness != 0 || pattern[1].brightness != 1 || pattern[0].delta_t != pattern[1].delta_t || (pattern[0].delta_t != 250 && pattern[0].delta_t != 500 && pattern[0].delta_t != 1000 && pattern[0].delta_t != 2000)) return -EINVAL; delay_off = pattern[0].delta_t; delay_on = pattern[1].delta_t; return cht_wc_leds_set_effect(cdev, &delay_on, &delay_off, CHT_WC_LED_EFF_BREATHING); } static int cht_wc_leds_pattern_clear(struct led_classdev *cdev) { return cht_wc_leds_brightness_set(cdev, 0); } static int cht_wc_led_save_regs(struct cht_wc_led *led, struct cht_wc_led_saved_regs *saved_regs) { int ret; ret = regmap_read(led->regmap, led->regs->ctrl, &saved_regs->ctrl); if (ret < 0) return ret; ret = regmap_read(led->regmap, led->regs->fsm, &saved_regs->fsm); if (ret < 0) return ret; return regmap_read(led->regmap, led->regs->pwm, &saved_regs->pwm); } static void cht_wc_led_restore_regs(struct cht_wc_led *led, const struct cht_wc_led_saved_regs *saved_regs) { regmap_write(led->regmap, led->regs->ctrl, saved_regs->ctrl); regmap_write(led->regmap, led->regs->fsm, saved_regs->fsm); regmap_write(led->regmap, led->regs->pwm, saved_regs->pwm); } static int cht_wc_leds_probe(struct platform_device *pdev) { struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent); struct cht_wc_leds *leds; int ret; int i; /* * On the Lenovo Yoga Tab 3 the LED1 driver output is actually * connected to a haptic feedback motor rather then a LED. * So do not register a LED classdev there (LED2 is unused). */ if (pmic->cht_wc_model == INTEL_CHT_WC_LENOVO_YT3_X90) return -ENODEV; leds = devm_kzalloc(&pdev->dev, sizeof(*leds), GFP_KERNEL); if (!leds) return -ENOMEM; /* * LED1 might be in hw-controlled mode when this driver gets loaded; and * since the PMIC is always powered by the battery any changes made are * permanent. Save LED1 regs to restore them on remove() or shutdown(). */ leds->leds[0].regs = &cht_wc_led_regs[0]; leds->leds[0].regmap = pmic->regmap; ret = cht_wc_led_save_regs(&leds->leds[0], &leds->led1_initial_regs); if (ret < 0) return ret; /* Set LED1 default trigger based on machine model */ switch (pmic->cht_wc_model) { case INTEL_CHT_WC_GPD_WIN_POCKET: leds->leds[0].cdev.default_trigger = "max170xx_battery-charging-blink-full-solid"; break; case INTEL_CHT_WC_XIAOMI_MIPAD2: leds->leds[0].cdev.default_trigger = "bq27520-0-charging-blink-full-solid"; break; case INTEL_CHT_WC_LENOVO_YOGABOOK1: leds->leds[0].cdev.default_trigger = "bq27542-0-charging-blink-full-solid"; break; default: dev_warn(&pdev->dev, "Unknown model, no default charging trigger\n"); break; } for (i = 0; i < CHT_WC_LED_COUNT; i++) { struct cht_wc_led *led = &leds->leds[i]; led->regs = &cht_wc_led_regs[i]; led->regmap = pmic->regmap; mutex_init(&led->mutex); led->cdev.name = cht_wc_leds_names[i]; led->cdev.brightness_set_blocking = cht_wc_leds_brightness_set; led->cdev.brightness_get = cht_wc_leds_brightness_get; led->cdev.blink_set = cht_wc_leds_blink_set; led->cdev.pattern_set = cht_wc_leds_pattern_set; led->cdev.pattern_clear = cht_wc_leds_pattern_clear; led->cdev.max_brightness = 255; ret = led_classdev_register(&pdev->dev, &led->cdev); if (ret < 0) return ret; } platform_set_drvdata(pdev, leds); return 0; } static void cht_wc_leds_remove(struct platform_device *pdev) { struct cht_wc_leds *leds = platform_get_drvdata(pdev); int i; for (i = 0; i < CHT_WC_LED_COUNT; i++) led_classdev_unregister(&leds->leds[i].cdev); /* Restore LED1 regs if hw-control was active else leave LED1 off */ if (!(leds->led1_initial_regs.ctrl & CHT_WC_LED1_SWCTL)) cht_wc_led_restore_regs(&leds->leds[0], &leds->led1_initial_regs); } static void cht_wc_leds_disable(struct platform_device *pdev) { struct cht_wc_leds *leds = platform_get_drvdata(pdev); int i; for (i = 0; i < CHT_WC_LED_COUNT; i++) cht_wc_leds_brightness_set(&leds->leds[i].cdev, 0); /* Restore LED1 regs if hw-control was active else leave LED1 off */ if (!(leds->led1_initial_regs.ctrl & CHT_WC_LED1_SWCTL)) cht_wc_led_restore_regs(&leds->leds[0], &leds->led1_initial_regs); } /* On suspend save current settings and turn LEDs off */ static int cht_wc_leds_suspend(struct device *dev) { struct cht_wc_leds *leds = dev_get_drvdata(dev); int i, ret; for (i = 0; i < CHT_WC_LED_COUNT; i++) { ret = cht_wc_led_save_regs(&leds->leds[i], &leds->leds[i].saved_regs); if (ret < 0) return ret; } cht_wc_leds_disable(to_platform_device(dev)); return 0; } /* On resume restore the saved settings */ static int cht_wc_leds_resume(struct device *dev) { struct cht_wc_leds *leds = dev_get_drvdata(dev); int i; for (i = 0; i < CHT_WC_LED_COUNT; i++) cht_wc_led_restore_regs(&leds->leds[i], &leds->leds[i].saved_regs); return 0; } static DEFINE_SIMPLE_DEV_PM_OPS(cht_wc_leds_pm, cht_wc_leds_suspend, cht_wc_leds_resume); static struct platform_driver cht_wc_leds_driver = { .probe = cht_wc_leds_probe, .remove_new = cht_wc_leds_remove, .shutdown = cht_wc_leds_disable, .driver = { .name = "cht_wcove_leds", .pm = pm_sleep_ptr(&cht_wc_leds_pm), }, }; module_platform_driver(cht_wc_leds_driver); MODULE_ALIAS("platform:cht_wcove_leds"); MODULE_DESCRIPTION("Intel Cherry Trail Whiskey Cove PMIC LEDs driver"); MODULE_AUTHOR("Yauhen Kharuzhy <jekhor@gmail.com>"); MODULE_LICENSE("GPL");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1