Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Benoit Parrot | 618 | 99.04% | 6 | 54.55% |
Junghak Sung | 2 | 0.32% | 2 | 18.18% |
Pawel Osciak | 2 | 0.32% | 1 | 9.09% |
Sakari Ailus | 1 | 0.16% | 1 | 9.09% |
Hans Verkuil | 1 | 0.16% | 1 | 9.09% |
Total | 624 | 11 |
/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2013 - 2014 Texas Instruments, Inc. * * Benoit Parrot <bparrot@ti.com> * Lad, Prabhakar <prabhakar.csengg@gmail.com> */ #ifndef AM437X_VPFE_H #define AM437X_VPFE_H #include <linux/am437x-vpfe.h> #include <linux/clk.h> #include <linux/completion.h> #include <linux/device.h> #include <linux/io.h> #include <linux/i2c.h> #include <linux/videodev2.h> #include <media/v4l2-dev.h> #include <media/v4l2-device.h> #include <media/v4l2-ioctl.h> #include <media/videobuf2-v4l2.h> #include <media/videobuf2-dma-contig.h> #include "am437x-vpfe_regs.h" enum vpfe_pin_pol { VPFE_PINPOL_POSITIVE = 0, VPFE_PINPOL_NEGATIVE, }; enum vpfe_hw_if_type { /* Raw Bayer */ VPFE_RAW_BAYER = 0, /* BT656 - 8 bit */ VPFE_BT656, /* BT656 - 10 bit */ VPFE_BT656_10BIT, /* YCbCr - 8 bit with external sync */ VPFE_YCBCR_SYNC_8, /* YCbCr - 16 bit with external sync */ VPFE_YCBCR_SYNC_16, }; /* interface description */ struct vpfe_hw_if_param { enum vpfe_hw_if_type if_type; enum vpfe_pin_pol hdpol; enum vpfe_pin_pol vdpol; unsigned int bus_width; }; #define VPFE_MAX_SUBDEV 1 #define VPFE_MAX_INPUTS 1 struct vpfe_std_info { int active_pixels; int active_lines; /* current frame format */ int frame_format; }; struct vpfe_route { u32 input; u32 output; }; struct vpfe_subdev_info { /* Sub device group id */ int grp_id; /* inputs available at the sub device */ struct v4l2_input inputs[VPFE_MAX_INPUTS]; /* Sub dev routing information for each input */ struct vpfe_route *routes; /* check if sub dev supports routing */ int can_route; /* ccdc bus/interface configuration */ struct vpfe_hw_if_param vpfe_param; struct v4l2_subdev *sd; }; struct vpfe_config { /* information about each subdev */ struct vpfe_subdev_info sub_devs[VPFE_MAX_SUBDEV]; /* Flat array, arranged in groups */ struct v4l2_async_connection *asd[VPFE_MAX_SUBDEV]; }; struct vpfe_cap_buffer { struct vb2_v4l2_buffer vb; struct list_head list; }; enum ccdc_pixfmt { CCDC_PIXFMT_RAW = 0, CCDC_PIXFMT_YCBCR_16BIT, CCDC_PIXFMT_YCBCR_8BIT, }; enum ccdc_frmfmt { CCDC_FRMFMT_PROGRESSIVE = 0, CCDC_FRMFMT_INTERLACED, }; /* PIXEL ORDER IN MEMORY from LSB to MSB */ /* only applicable for 8-bit input mode */ enum ccdc_pixorder { CCDC_PIXORDER_YCBYCR, CCDC_PIXORDER_CBYCRY, }; enum ccdc_buftype { CCDC_BUFTYPE_FLD_INTERLEAVED, CCDC_BUFTYPE_FLD_SEPARATED }; /* returns the highest bit used for the gamma */ static inline u8 ccdc_gamma_width_max_bit(enum vpfe_ccdc_gamma_width width) { return 15 - width; } /* returns the highest bit used for this data size */ static inline u8 ccdc_data_size_max_bit(enum vpfe_ccdc_data_size sz) { return sz == VPFE_CCDC_DATA_8BITS ? 7 : 15 - sz; } /* Structure for CCDC configuration parameters for raw capture mode */ struct ccdc_params_raw { /* pixel format */ enum ccdc_pixfmt pix_fmt; /* progressive or interlaced frame */ enum ccdc_frmfmt frm_fmt; struct v4l2_rect win; /* Current Format Bytes Per Pixels */ unsigned int bytesperpixel; /* Current Format Bytes per Lines * (Aligned to 32 bytes) used for HORZ_INFO */ unsigned int bytesperline; /* field id polarity */ enum vpfe_pin_pol fid_pol; /* vertical sync polarity */ enum vpfe_pin_pol vd_pol; /* horizontal sync polarity */ enum vpfe_pin_pol hd_pol; /* interleaved or separated fields */ enum ccdc_buftype buf_type; /* * enable to store the image in inverse * order in memory(bottom to top) */ unsigned char image_invert_enable; /* configurable parameters */ struct vpfe_ccdc_config_params_raw config_params; }; struct ccdc_params_ycbcr { /* pixel format */ enum ccdc_pixfmt pix_fmt; /* progressive or interlaced frame */ enum ccdc_frmfmt frm_fmt; struct v4l2_rect win; /* Current Format Bytes Per Pixels */ unsigned int bytesperpixel; /* Current Format Bytes per Lines * (Aligned to 32 bytes) used for HORZ_INFO */ unsigned int bytesperline; /* field id polarity */ enum vpfe_pin_pol fid_pol; /* vertical sync polarity */ enum vpfe_pin_pol vd_pol; /* horizontal sync polarity */ enum vpfe_pin_pol hd_pol; /* enable BT.656 embedded sync mode */ int bt656_enable; /* cb:y:cr:y or y:cb:y:cr in memory */ enum ccdc_pixorder pix_order; /* interleaved or separated fields */ enum ccdc_buftype buf_type; }; /* * CCDC operational configuration */ struct ccdc_config { /* CCDC interface type */ enum vpfe_hw_if_type if_type; /* Raw Bayer configuration */ struct ccdc_params_raw bayer; /* YCbCr configuration */ struct ccdc_params_ycbcr ycbcr; /* ccdc base address */ void __iomem *base_addr; }; struct vpfe_ccdc { struct ccdc_config ccdc_cfg; u32 ccdc_ctx[VPFE_REG_END / sizeof(u32)]; }; /* * struct vpfe_fmt - VPFE media bus format information * fourcc: V4L2 pixel format code * code: V4L2 media bus format code * bitsperpixel: Bits per pixel over the bus */ struct vpfe_fmt { u32 fourcc; u32 code; u32 bitsperpixel; }; /* * When formats[] is modified make sure to adjust this value also. * Expect compile time warnings if VPFE_NUM_FORMATS is smaller then * the number of elements in formats[]. */ #define VPFE_NUM_FORMATS 10 struct vpfe_device { /* V4l2 specific parameters */ /* Identifies video device for this channel */ struct video_device video_dev; /* sub devices */ struct v4l2_subdev **sd; /* vpfe cfg */ struct vpfe_config *cfg; /* V4l2 device */ struct v4l2_device v4l2_dev; /* parent device */ struct device *pdev; /* subdevice async Notifier */ struct v4l2_async_notifier notifier; /* Indicates id of the field which is being displayed */ unsigned field; unsigned sequence; /* current interface type */ struct vpfe_hw_if_param vpfe_if_params; /* ptr to currently selected sub device */ struct vpfe_subdev_info *current_subdev; /* current input at the sub device */ int current_input; /* Keeps track of the information about the standard */ struct vpfe_std_info std_info; /* std index into std table */ int std_index; /* IRQs used when CCDC output to SDRAM */ unsigned int irq; /* Pointer pointing to current v4l2_buffer */ struct vpfe_cap_buffer *cur_frm; /* Pointer pointing to next v4l2_buffer */ struct vpfe_cap_buffer *next_frm; /* Used to store pixel format */ struct v4l2_format fmt; /* Used to keep a reference to the current vpfe_fmt */ struct vpfe_fmt *current_vpfe_fmt; struct vpfe_fmt *active_fmt[VPFE_NUM_FORMATS]; unsigned int num_active_fmt; /* * used when IMP is chained to store the crop window which * is different from the image window */ struct v4l2_rect crop; /* Buffer queue used in vb2 */ struct vb2_queue buffer_queue; /* Queue of filled frames */ struct list_head dma_queue; /* IRQ lock for DMA queue */ spinlock_t dma_queue_lock; /* lock used to access this structure */ struct mutex lock; /* * offset where second field starts from the starting of the * buffer for field separated YCbCr formats */ u32 field_off; struct vpfe_ccdc ccdc; int stopping; struct completion capture_stop; }; #endif /* AM437X_VPFE_H */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1