Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Andres Salomon | 1292 | 88.19% | 7 | 43.75% |
Richard Weinberger | 133 | 9.08% | 2 | 12.50% |
Jens Rottmann | 31 | 2.12% | 1 | 6.25% |
Nikanth Karthikesan | 2 | 0.14% | 1 | 6.25% |
Linus Torvalds (pre-git) | 2 | 0.14% | 1 | 6.25% |
Thomas Gleixner | 2 | 0.14% | 1 | 6.25% |
Christian Gmeiner | 1 | 0.07% | 1 | 6.25% |
Joe Perches | 1 | 0.07% | 1 | 6.25% |
Linus Torvalds | 1 | 0.07% | 1 | 6.25% |
Total | 1465 | 16 |
// SPDX-License-Identifier: GPL-2.0-only /* * Driver for the CS5535/CS5536 Multi-Function General Purpose Timers (MFGPT) * * Copyright (C) 2006, Advanced Micro Devices, Inc. * Copyright (C) 2007 Andres Salomon <dilinger@debian.org> * Copyright (C) 2009 Andres Salomon <dilinger@collabora.co.uk> * * The MFGPTs are documented in AMD Geode CS5536 Companion Device Data Book. */ #include <linux/kernel.h> #include <linux/spinlock.h> #include <linux/interrupt.h> #include <linux/module.h> #include <linux/platform_device.h> #include <linux/cs5535.h> #include <linux/slab.h> #define DRV_NAME "cs5535-mfgpt" static int mfgpt_reset_timers; module_param_named(mfgptfix, mfgpt_reset_timers, int, 0644); MODULE_PARM_DESC(mfgptfix, "Try to reset the MFGPT timers during init; " "required by some broken BIOSes (ie, TinyBIOS < 0.99) or kexec " "(1 = reset the MFGPT using an undocumented bit, " "2 = perform a soft reset by unconfiguring all timers); " "use what works best for you."); struct cs5535_mfgpt_timer { struct cs5535_mfgpt_chip *chip; int nr; }; static struct cs5535_mfgpt_chip { DECLARE_BITMAP(avail, MFGPT_MAX_TIMERS); resource_size_t base; struct platform_device *pdev; spinlock_t lock; int initialized; } cs5535_mfgpt_chip; int cs5535_mfgpt_toggle_event(struct cs5535_mfgpt_timer *timer, int cmp, int event, int enable) { uint32_t msr, mask, value, dummy; int shift = (cmp == MFGPT_CMP1) ? 0 : 8; if (!timer) { WARN_ON(1); return -EIO; } /* * The register maps for these are described in sections 6.17.1.x of * the AMD Geode CS5536 Companion Device Data Book. */ switch (event) { case MFGPT_EVENT_RESET: /* * XXX: According to the docs, we cannot reset timers above * 6; that is, resets for 7 and 8 will be ignored. Is this * a problem? -dilinger */ msr = MSR_MFGPT_NR; mask = 1 << (timer->nr + 24); break; case MFGPT_EVENT_NMI: msr = MSR_MFGPT_NR; mask = 1 << (timer->nr + shift); break; case MFGPT_EVENT_IRQ: msr = MSR_MFGPT_IRQ; mask = 1 << (timer->nr + shift); break; default: return -EIO; } rdmsr(msr, value, dummy); if (enable) value |= mask; else value &= ~mask; wrmsr(msr, value, dummy); return 0; } EXPORT_SYMBOL_GPL(cs5535_mfgpt_toggle_event); int cs5535_mfgpt_set_irq(struct cs5535_mfgpt_timer *timer, int cmp, int *irq, int enable) { uint32_t zsel, lpc, dummy; int shift; if (!timer) { WARN_ON(1); return -EIO; } /* * Unfortunately, MFGPTs come in pairs sharing their IRQ lines. If VSA * is using the same CMP of the timer's Siamese twin, the IRQ is set to * 2, and we mustn't use nor change it. * XXX: Likewise, 2 Linux drivers might clash if the 2nd overwrites the * IRQ of the 1st. This can only happen if forcing an IRQ, calling this * with *irq==0 is safe. Currently there _are_ no 2 drivers. */ rdmsr(MSR_PIC_ZSEL_LOW, zsel, dummy); shift = ((cmp == MFGPT_CMP1 ? 0 : 4) + timer->nr % 4) * 4; if (((zsel >> shift) & 0xF) == 2) return -EIO; /* Choose IRQ: if none supplied, keep IRQ already set or use default */ if (!*irq) *irq = (zsel >> shift) & 0xF; if (!*irq) *irq = CONFIG_CS5535_MFGPT_DEFAULT_IRQ; /* Can't use IRQ if it's 0 (=disabled), 2, or routed to LPC */ if (*irq < 1 || *irq == 2 || *irq > 15) return -EIO; rdmsr(MSR_PIC_IRQM_LPC, lpc, dummy); if (lpc & (1 << *irq)) return -EIO; /* All chosen and checked - go for it */ if (cs5535_mfgpt_toggle_event(timer, cmp, MFGPT_EVENT_IRQ, enable)) return -EIO; if (enable) { zsel = (zsel & ~(0xF << shift)) | (*irq << shift); wrmsr(MSR_PIC_ZSEL_LOW, zsel, dummy); } return 0; } EXPORT_SYMBOL_GPL(cs5535_mfgpt_set_irq); struct cs5535_mfgpt_timer *cs5535_mfgpt_alloc_timer(int timer_nr, int domain) { struct cs5535_mfgpt_chip *mfgpt = &cs5535_mfgpt_chip; struct cs5535_mfgpt_timer *timer = NULL; unsigned long flags; int max; if (!mfgpt->initialized) goto done; /* only allocate timers from the working domain if requested */ if (domain == MFGPT_DOMAIN_WORKING) max = 6; else max = MFGPT_MAX_TIMERS; if (timer_nr >= max) { /* programmer error. silly programmers! */ WARN_ON(1); goto done; } spin_lock_irqsave(&mfgpt->lock, flags); if (timer_nr < 0) { unsigned long t; /* try to find any available timer */ t = find_first_bit(mfgpt->avail, max); /* set timer_nr to -1 if no timers available */ timer_nr = t < max ? (int) t : -1; } else { /* check if the requested timer's available */ if (!test_bit(timer_nr, mfgpt->avail)) timer_nr = -1; } if (timer_nr >= 0) /* if timer_nr is not -1, it's an available timer */ __clear_bit(timer_nr, mfgpt->avail); spin_unlock_irqrestore(&mfgpt->lock, flags); if (timer_nr < 0) goto done; timer = kmalloc(sizeof(*timer), GFP_KERNEL); if (!timer) { /* aw hell */ spin_lock_irqsave(&mfgpt->lock, flags); __set_bit(timer_nr, mfgpt->avail); spin_unlock_irqrestore(&mfgpt->lock, flags); goto done; } timer->chip = mfgpt; timer->nr = timer_nr; dev_info(&mfgpt->pdev->dev, "registered timer %d\n", timer_nr); done: return timer; } EXPORT_SYMBOL_GPL(cs5535_mfgpt_alloc_timer); /* * XXX: This frees the timer memory, but never resets the actual hardware * timer. The old geode_mfgpt code did this; it would be good to figure * out a way to actually release the hardware timer. See comments below. */ void cs5535_mfgpt_free_timer(struct cs5535_mfgpt_timer *timer) { unsigned long flags; uint16_t val; /* timer can be made available again only if never set up */ val = cs5535_mfgpt_read(timer, MFGPT_REG_SETUP); if (!(val & MFGPT_SETUP_SETUP)) { spin_lock_irqsave(&timer->chip->lock, flags); __set_bit(timer->nr, timer->chip->avail); spin_unlock_irqrestore(&timer->chip->lock, flags); } kfree(timer); } EXPORT_SYMBOL_GPL(cs5535_mfgpt_free_timer); uint16_t cs5535_mfgpt_read(struct cs5535_mfgpt_timer *timer, uint16_t reg) { return inw(timer->chip->base + reg + (timer->nr * 8)); } EXPORT_SYMBOL_GPL(cs5535_mfgpt_read); void cs5535_mfgpt_write(struct cs5535_mfgpt_timer *timer, uint16_t reg, uint16_t value) { outw(value, timer->chip->base + reg + (timer->nr * 8)); } EXPORT_SYMBOL_GPL(cs5535_mfgpt_write); /* * This is a sledgehammer that resets all MFGPT timers. This is required by * some broken BIOSes which leave the system in an unstable state * (TinyBIOS 0.98, for example; fixed in 0.99). It's uncertain as to * whether or not this secret MSR can be used to release individual timers. * Jordan tells me that he and Mitch once played w/ it, but it's unclear * what the results of that were (and they experienced some instability). */ static void reset_all_timers(void) { uint32_t val, dummy; /* The following undocumented bit resets the MFGPT timers */ val = 0xFF; dummy = 0; wrmsr(MSR_MFGPT_SETUP, val, dummy); } /* * This is another sledgehammer to reset all MFGPT timers. * Instead of using the undocumented bit method it clears * IRQ, NMI and RESET settings. */ static void soft_reset(void) { int i; struct cs5535_mfgpt_timer t; for (i = 0; i < MFGPT_MAX_TIMERS; i++) { t.nr = i; cs5535_mfgpt_toggle_event(&t, MFGPT_CMP1, MFGPT_EVENT_RESET, 0); cs5535_mfgpt_toggle_event(&t, MFGPT_CMP2, MFGPT_EVENT_RESET, 0); cs5535_mfgpt_toggle_event(&t, MFGPT_CMP1, MFGPT_EVENT_NMI, 0); cs5535_mfgpt_toggle_event(&t, MFGPT_CMP2, MFGPT_EVENT_NMI, 0); cs5535_mfgpt_toggle_event(&t, MFGPT_CMP1, MFGPT_EVENT_IRQ, 0); cs5535_mfgpt_toggle_event(&t, MFGPT_CMP2, MFGPT_EVENT_IRQ, 0); } } /* * Check whether any MFGPTs are available for the kernel to use. In most * cases, firmware that uses AMD's VSA code will claim all timers during * bootup; we certainly don't want to take them if they're already in use. * In other cases (such as with VSAless OpenFirmware), the system firmware * leaves timers available for us to use. */ static int scan_timers(struct cs5535_mfgpt_chip *mfgpt) { struct cs5535_mfgpt_timer timer = { .chip = mfgpt }; unsigned long flags; int timers = 0; uint16_t val; int i; /* bios workaround */ if (mfgpt_reset_timers == 1) reset_all_timers(); else if (mfgpt_reset_timers == 2) soft_reset(); /* just to be safe, protect this section w/ lock */ spin_lock_irqsave(&mfgpt->lock, flags); for (i = 0; i < MFGPT_MAX_TIMERS; i++) { timer.nr = i; val = cs5535_mfgpt_read(&timer, MFGPT_REG_SETUP); if (!(val & MFGPT_SETUP_SETUP) || mfgpt_reset_timers == 2) { __set_bit(i, mfgpt->avail); timers++; } } spin_unlock_irqrestore(&mfgpt->lock, flags); return timers; } static int cs5535_mfgpt_probe(struct platform_device *pdev) { struct resource *res; int err = -EIO, t; if (mfgpt_reset_timers < 0 || mfgpt_reset_timers > 2) { dev_err(&pdev->dev, "Bad mfgpt_reset_timers value: %i\n", mfgpt_reset_timers); goto done; } /* There are two ways to get the MFGPT base address; one is by * fetching it from MSR_LBAR_MFGPT, the other is by reading the * PCI BAR info. The latter method is easier (especially across * different architectures), so we'll stick with that for now. If * it turns out to be unreliable in the face of crappy BIOSes, we * can always go back to using MSRs.. */ res = platform_get_resource(pdev, IORESOURCE_IO, 0); if (!res) { dev_err(&pdev->dev, "can't fetch device resource info\n"); goto done; } if (!request_region(res->start, resource_size(res), pdev->name)) { dev_err(&pdev->dev, "can't request region\n"); goto done; } /* set up the driver-specific struct */ cs5535_mfgpt_chip.base = res->start; cs5535_mfgpt_chip.pdev = pdev; spin_lock_init(&cs5535_mfgpt_chip.lock); dev_info(&pdev->dev, "reserved resource region %pR\n", res); /* detect the available timers */ t = scan_timers(&cs5535_mfgpt_chip); dev_info(&pdev->dev, "%d MFGPT timers available\n", t); cs5535_mfgpt_chip.initialized = 1; return 0; done: return err; } static struct platform_driver cs5535_mfgpt_driver = { .driver = { .name = DRV_NAME, }, .probe = cs5535_mfgpt_probe, }; static int __init cs5535_mfgpt_init(void) { return platform_driver_register(&cs5535_mfgpt_driver); } module_init(cs5535_mfgpt_init); MODULE_AUTHOR("Andres Salomon <dilinger@queued.net>"); MODULE_DESCRIPTION("CS5535/CS5536 MFGPT timer driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:" DRV_NAME);
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1