Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Gustavo Pimentel | 1940 | 100.00% | 1 | 100.00% |
Total | 1940 | 1 |
// SPDX-License-Identifier: GPL-2.0 /* * Copyright (c) 2020 Synopsys, Inc. and/or its affiliates. * Synopsys DesignWare xData driver * * Author: Gustavo Pimentel <gustavo.pimentel@synopsys.com> */ #include <linux/miscdevice.h> #include <linux/bitfield.h> #include <linux/pci-epf.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/device.h> #include <linux/bitops.h> #include <linux/mutex.h> #include <linux/delay.h> #include <linux/pci.h> #define DW_XDATA_DRIVER_NAME "dw-xdata-pcie" #define DW_XDATA_EP_MEM_OFFSET 0x8000000 static DEFINE_IDA(xdata_ida); #define STATUS_DONE BIT(0) #define CONTROL_DOORBELL BIT(0) #define CONTROL_IS_WRITE BIT(1) #define CONTROL_LENGTH(a) FIELD_PREP(GENMASK(13, 2), a) #define CONTROL_PATTERN_INC BIT(16) #define CONTROL_NO_ADDR_INC BIT(18) #define XPERF_CONTROL_ENABLE BIT(5) #define BURST_REPEAT BIT(31) #define BURST_VALUE 0x1001 #define PATTERN_VALUE 0x0 struct dw_xdata_regs { u32 addr_lsb; /* 0x000 */ u32 addr_msb; /* 0x004 */ u32 burst_cnt; /* 0x008 */ u32 control; /* 0x00c */ u32 pattern; /* 0x010 */ u32 status; /* 0x014 */ u32 RAM_addr; /* 0x018 */ u32 RAM_port; /* 0x01c */ u32 _reserved0[14]; /* 0x020..0x054 */ u32 perf_control; /* 0x058 */ u32 _reserved1[41]; /* 0x05c..0x0fc */ u32 wr_cnt_lsb; /* 0x100 */ u32 wr_cnt_msb; /* 0x104 */ u32 rd_cnt_lsb; /* 0x108 */ u32 rd_cnt_msb; /* 0x10c */ } __packed; struct dw_xdata_region { phys_addr_t paddr; /* physical address */ void __iomem *vaddr; /* virtual address */ }; struct dw_xdata { struct dw_xdata_region rg_region; /* registers */ size_t max_wr_len; /* max wr xfer len */ size_t max_rd_len; /* max rd xfer len */ struct mutex mutex; struct pci_dev *pdev; struct miscdevice misc_dev; }; static inline struct dw_xdata_regs __iomem *__dw_regs(struct dw_xdata *dw) { return dw->rg_region.vaddr; } static void dw_xdata_stop(struct dw_xdata *dw) { u32 burst; mutex_lock(&dw->mutex); burst = readl(&(__dw_regs(dw)->burst_cnt)); if (burst & BURST_REPEAT) { burst &= ~(u32)BURST_REPEAT; writel(burst, &(__dw_regs(dw)->burst_cnt)); } mutex_unlock(&dw->mutex); } static void dw_xdata_start(struct dw_xdata *dw, bool write) { struct device *dev = &dw->pdev->dev; u32 control, status; /* Stop first if xfer in progress */ dw_xdata_stop(dw); mutex_lock(&dw->mutex); /* Clear status register */ writel(0x0, &(__dw_regs(dw)->status)); /* Burst count register set for continuous until stopped */ writel(BURST_REPEAT | BURST_VALUE, &(__dw_regs(dw)->burst_cnt)); /* Pattern register */ writel(PATTERN_VALUE, &(__dw_regs(dw)->pattern)); /* Control register */ control = CONTROL_DOORBELL | CONTROL_PATTERN_INC | CONTROL_NO_ADDR_INC; if (write) { control |= CONTROL_IS_WRITE; control |= CONTROL_LENGTH(dw->max_wr_len); } else { control |= CONTROL_LENGTH(dw->max_rd_len); } writel(control, &(__dw_regs(dw)->control)); /* * The xData HW block needs about 100 ms to initiate the traffic * generation according this HW block datasheet. */ usleep_range(100, 150); status = readl(&(__dw_regs(dw)->status)); mutex_unlock(&dw->mutex); if (!(status & STATUS_DONE)) dev_dbg(dev, "xData: started %s direction\n", write ? "write" : "read"); } static void dw_xdata_perf_meas(struct dw_xdata *dw, u64 *data, bool write) { if (write) { *data = readl(&(__dw_regs(dw)->wr_cnt_msb)); *data <<= 32; *data |= readl(&(__dw_regs(dw)->wr_cnt_lsb)); } else { *data = readl(&(__dw_regs(dw)->rd_cnt_msb)); *data <<= 32; *data |= readl(&(__dw_regs(dw)->rd_cnt_lsb)); } } static u64 dw_xdata_perf_diff(u64 *m1, u64 *m2, u64 time) { u64 rate = (*m1 - *m2); rate *= (1000 * 1000 * 1000); rate >>= 20; rate = DIV_ROUND_CLOSEST_ULL(rate, time); return rate; } static void dw_xdata_perf(struct dw_xdata *dw, u64 *rate, bool write) { struct device *dev = &dw->pdev->dev; u64 data[2], time[2], diff; mutex_lock(&dw->mutex); /* First acquisition of current count frames */ writel(0x0, &(__dw_regs(dw)->perf_control)); dw_xdata_perf_meas(dw, &data[0], write); time[0] = jiffies; writel((u32)XPERF_CONTROL_ENABLE, &(__dw_regs(dw)->perf_control)); /* * Wait 100ms between the 1st count frame acquisition and the 2nd * count frame acquisition, in order to calculate the speed later */ mdelay(100); /* Second acquisition of current count frames */ writel(0x0, &(__dw_regs(dw)->perf_control)); dw_xdata_perf_meas(dw, &data[1], write); time[1] = jiffies; writel((u32)XPERF_CONTROL_ENABLE, &(__dw_regs(dw)->perf_control)); /* * Speed calculation * * rate = (2nd count frames - 1st count frames) / (time elapsed) */ diff = jiffies_to_nsecs(time[1] - time[0]); *rate = dw_xdata_perf_diff(&data[1], &data[0], diff); mutex_unlock(&dw->mutex); dev_dbg(dev, "xData: time=%llu us, %s=%llu MB/s\n", diff, write ? "write" : "read", *rate); } static struct dw_xdata *misc_dev_to_dw(struct miscdevice *misc_dev) { return container_of(misc_dev, struct dw_xdata, misc_dev); } static ssize_t write_show(struct device *dev, struct device_attribute *attr, char *buf) { struct miscdevice *misc_dev = dev_get_drvdata(dev); struct dw_xdata *dw = misc_dev_to_dw(misc_dev); u64 rate; dw_xdata_perf(dw, &rate, true); return sysfs_emit(buf, "%llu\n", rate); } static ssize_t write_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t size) { struct miscdevice *misc_dev = dev_get_drvdata(dev); struct dw_xdata *dw = misc_dev_to_dw(misc_dev); bool enabled; int ret; ret = kstrtobool(buf, &enabled); if (ret < 0) return ret; if (enabled) { dev_dbg(dev, "xData: requested write transfer\n"); dw_xdata_start(dw, true); } else { dev_dbg(dev, "xData: requested stop transfer\n"); dw_xdata_stop(dw); } return size; } static DEVICE_ATTR_RW(write); static ssize_t read_show(struct device *dev, struct device_attribute *attr, char *buf) { struct miscdevice *misc_dev = dev_get_drvdata(dev); struct dw_xdata *dw = misc_dev_to_dw(misc_dev); u64 rate; dw_xdata_perf(dw, &rate, false); return sysfs_emit(buf, "%llu\n", rate); } static ssize_t read_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t size) { struct miscdevice *misc_dev = dev_get_drvdata(dev); struct dw_xdata *dw = misc_dev_to_dw(misc_dev); bool enabled; int ret; ret = kstrtobool(buf, &enabled); if (ret < 0) return ret; if (enabled) { dev_dbg(dev, "xData: requested read transfer\n"); dw_xdata_start(dw, false); } else { dev_dbg(dev, "xData: requested stop transfer\n"); dw_xdata_stop(dw); } return size; } static DEVICE_ATTR_RW(read); static struct attribute *xdata_attrs[] = { &dev_attr_write.attr, &dev_attr_read.attr, NULL, }; ATTRIBUTE_GROUPS(xdata); static int dw_xdata_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *pid) { struct device *dev = &pdev->dev; struct dw_xdata *dw; char name[24]; u64 addr; int err; int id; /* Enable PCI device */ err = pcim_enable_device(pdev); if (err) { dev_err(dev, "enabling device failed\n"); return err; } /* Mapping PCI BAR regions */ err = pcim_iomap_regions(pdev, BIT(BAR_0), pci_name(pdev)); if (err) { dev_err(dev, "xData BAR I/O remapping failed\n"); return err; } pci_set_master(pdev); /* Allocate memory */ dw = devm_kzalloc(dev, sizeof(*dw), GFP_KERNEL); if (!dw) return -ENOMEM; /* Data structure initialization */ mutex_init(&dw->mutex); dw->rg_region.vaddr = pcim_iomap_table(pdev)[BAR_0]; if (!dw->rg_region.vaddr) return -ENOMEM; dw->rg_region.paddr = pdev->resource[BAR_0].start; dw->max_wr_len = pcie_get_mps(pdev); dw->max_wr_len >>= 2; dw->max_rd_len = pcie_get_readrq(pdev); dw->max_rd_len >>= 2; dw->pdev = pdev; id = ida_simple_get(&xdata_ida, 0, 0, GFP_KERNEL); if (id < 0) { dev_err(dev, "xData: unable to get id\n"); return id; } snprintf(name, sizeof(name), DW_XDATA_DRIVER_NAME ".%d", id); dw->misc_dev.name = kstrdup(name, GFP_KERNEL); if (!dw->misc_dev.name) { err = -ENOMEM; goto err_ida_remove; } dw->misc_dev.minor = MISC_DYNAMIC_MINOR; dw->misc_dev.parent = dev; dw->misc_dev.groups = xdata_groups; writel(0x0, &(__dw_regs(dw)->RAM_addr)); writel(0x0, &(__dw_regs(dw)->RAM_port)); addr = dw->rg_region.paddr + DW_XDATA_EP_MEM_OFFSET; writel(lower_32_bits(addr), &(__dw_regs(dw)->addr_lsb)); writel(upper_32_bits(addr), &(__dw_regs(dw)->addr_msb)); dev_dbg(dev, "xData: target address = 0x%.16llx\n", addr); dev_dbg(dev, "xData: wr_len = %zu, rd_len = %zu\n", dw->max_wr_len * 4, dw->max_rd_len * 4); /* Saving data structure reference */ pci_set_drvdata(pdev, dw); /* Register misc device */ err = misc_register(&dw->misc_dev); if (err) { dev_err(dev, "xData: failed to register device\n"); goto err_kfree_name; } return 0; err_kfree_name: kfree(dw->misc_dev.name); err_ida_remove: ida_simple_remove(&xdata_ida, id); return err; } static void dw_xdata_pcie_remove(struct pci_dev *pdev) { struct dw_xdata *dw = pci_get_drvdata(pdev); int id; if (sscanf(dw->misc_dev.name, DW_XDATA_DRIVER_NAME ".%d", &id) != 1) return; if (id < 0) return; dw_xdata_stop(dw); misc_deregister(&dw->misc_dev); kfree(dw->misc_dev.name); ida_simple_remove(&xdata_ida, id); } static const struct pci_device_id dw_xdata_pcie_id_table[] = { { PCI_DEVICE_DATA(SYNOPSYS, EDDA, NULL) }, { } }; MODULE_DEVICE_TABLE(pci, dw_xdata_pcie_id_table); static struct pci_driver dw_xdata_pcie_driver = { .name = DW_XDATA_DRIVER_NAME, .id_table = dw_xdata_pcie_id_table, .probe = dw_xdata_pcie_probe, .remove = dw_xdata_pcie_remove, }; module_pci_driver(dw_xdata_pcie_driver); MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("Synopsys DesignWare xData PCIe driver"); MODULE_AUTHOR("Gustavo Pimentel <gustavo.pimentel@synopsys.com>");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1