Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
William Qiu | 553 | 99.82% | 2 | 66.67% |
Uwe Kleine-König | 1 | 0.18% | 1 | 33.33% |
Total | 554 | 3 |
// SPDX-License-Identifier: GPL-2.0 /* * StarFive Designware Mobile Storage Host Controller Driver * * Copyright (c) 2022 StarFive Technology Co., Ltd. */ #include <linux/bitfield.h> #include <linux/clk.h> #include <linux/delay.h> #include <linux/mfd/syscon.h> #include <linux/mmc/host.h> #include <linux/module.h> #include <linux/of_address.h> #include <linux/platform_device.h> #include <linux/regmap.h> #include "dw_mmc.h" #include "dw_mmc-pltfm.h" #define ALL_INT_CLR 0x1ffff #define MAX_DELAY_CHAIN 32 #define STARFIVE_SMPL_PHASE GENMASK(20, 16) static void dw_mci_starfive_set_ios(struct dw_mci *host, struct mmc_ios *ios) { int ret; unsigned int clock; if (ios->timing == MMC_TIMING_MMC_DDR52 || ios->timing == MMC_TIMING_UHS_DDR50) { clock = (ios->clock > 50000000 && ios->clock <= 52000000) ? 100000000 : ios->clock; ret = clk_set_rate(host->ciu_clk, clock); if (ret) dev_dbg(host->dev, "Use an external frequency divider %uHz\n", ios->clock); host->bus_hz = clk_get_rate(host->ciu_clk); } else { dev_dbg(host->dev, "Using the internal divider\n"); } } static void dw_mci_starfive_set_sample_phase(struct dw_mci *host, u32 smpl_phase) { /* change driver phase and sample phase */ u32 reg_value = mci_readl(host, UHS_REG_EXT); /* In UHS_REG_EXT, only 5 bits valid in DRV_PHASE and SMPL_PHASE */ reg_value &= ~STARFIVE_SMPL_PHASE; reg_value |= FIELD_PREP(STARFIVE_SMPL_PHASE, smpl_phase); mci_writel(host, UHS_REG_EXT, reg_value); /* We should delay 1ms wait for timing setting finished. */ mdelay(1); } static int dw_mci_starfive_execute_tuning(struct dw_mci_slot *slot, u32 opcode) { static const int grade = MAX_DELAY_CHAIN; struct dw_mci *host = slot->host; int smpl_phase, smpl_raise = -1, smpl_fall = -1; int ret; for (smpl_phase = 0; smpl_phase < grade; smpl_phase++) { dw_mci_starfive_set_sample_phase(host, smpl_phase); mci_writel(host, RINTSTS, ALL_INT_CLR); ret = mmc_send_tuning(slot->mmc, opcode, NULL); if (!ret && smpl_raise < 0) { smpl_raise = smpl_phase; } else if (ret && smpl_raise >= 0) { smpl_fall = smpl_phase - 1; break; } } if (smpl_phase >= grade) smpl_fall = grade - 1; if (smpl_raise < 0) { smpl_phase = 0; dev_err(host->dev, "No valid delay chain! use default\n"); ret = -EINVAL; goto out; } smpl_phase = (smpl_raise + smpl_fall) / 2; dev_dbg(host->dev, "Found valid delay chain! use it [delay=%d]\n", smpl_phase); ret = 0; out: dw_mci_starfive_set_sample_phase(host, smpl_phase); mci_writel(host, RINTSTS, ALL_INT_CLR); return ret; } static const struct dw_mci_drv_data starfive_data = { .common_caps = MMC_CAP_CMD23, .set_ios = dw_mci_starfive_set_ios, .execute_tuning = dw_mci_starfive_execute_tuning, }; static const struct of_device_id dw_mci_starfive_match[] = { { .compatible = "starfive,jh7110-mmc", .data = &starfive_data }, {}, }; MODULE_DEVICE_TABLE(of, dw_mci_starfive_match); static int dw_mci_starfive_probe(struct platform_device *pdev) { return dw_mci_pltfm_register(pdev, &starfive_data); } static struct platform_driver dw_mci_starfive_driver = { .probe = dw_mci_starfive_probe, .remove_new = dw_mci_pltfm_remove, .driver = { .name = "dwmmc_starfive", .probe_type = PROBE_PREFER_ASYNCHRONOUS, .of_match_table = dw_mci_starfive_match, }, }; module_platform_driver(dw_mci_starfive_driver); MODULE_DESCRIPTION("StarFive JH7110 Specific DW-MSHC Driver Extension"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:dwmmc_starfive");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1