Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Linus Torvalds (pre-git) | 1342 | 64.89% | 43 | 58.90% |
Joe Perches | 369 | 17.84% | 11 | 15.07% |
Esben Nielsen | 115 | 5.56% | 1 | 1.37% |
Michael Grzeschik | 83 | 4.01% | 3 | 4.11% |
Stephen Hemminger | 29 | 1.40% | 1 | 1.37% |
Wang Chen | 24 | 1.16% | 1 | 1.37% |
Christoph Hellwig | 24 | 1.16% | 1 | 1.37% |
Randy Dunlap | 23 | 1.11% | 2 | 2.74% |
Jon Schindler | 16 | 0.77% | 1 | 1.37% |
Alan Cox | 12 | 0.58% | 1 | 1.37% |
Harvey Harrison | 8 | 0.39% | 1 | 1.37% |
Dave Jones | 5 | 0.24% | 1 | 1.37% |
Jakub Kiciński | 5 | 0.24% | 1 | 1.37% |
David S. Miller | 5 | 0.24% | 1 | 1.37% |
Jeff Morrow | 3 | 0.15% | 1 | 1.37% |
Alexey Dobriyan | 3 | 0.15% | 1 | 1.37% |
Jiri Pirko | 1 | 0.05% | 1 | 1.37% |
Jeff Garzik | 1 | 0.05% | 1 | 1.37% |
Total | 2068 | 73 |
/* * Linux ARCnet driver - COM20020 chipset support * * Written 1997 by David Woodhouse. * Written 1994-1999 by Avery Pennarun. * Written 1999 by Martin Mares <mj@ucw.cz>. * Derived from skeleton.c by Donald Becker. * * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com) * for sponsoring the further development of this driver. * * ********************** * * The original copyright of skeleton.c was as follows: * * skeleton.c Written 1993 by Donald Becker. * Copyright 1993 United States Government as represented by the * Director, National Security Agency. This software may only be used * and distributed according to the terms of the GNU General Public License as * modified by SRC, incorporated herein by reference. * * ********************** * * For more details, see drivers/net/arcnet.c * * ********************** */ #define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt #include <linux/module.h> #include <linux/kernel.h> #include <linux/types.h> #include <linux/ioport.h> #include <linux/errno.h> #include <linux/delay.h> #include <linux/netdevice.h> #include <linux/init.h> #include <linux/interrupt.h> #include <linux/io.h> #include "arcdevice.h" #include "com20020.h" static const char * const clockrates[] = { "XXXXXXX", "XXXXXXXX", "XXXXXX", "2.5 Mb/s", "1.25Mb/s", "625 Kb/s", "312.5 Kb/s", "156.25 Kb/s", "Reserved", "Reserved", "Reserved" }; static void com20020_command(struct net_device *dev, int command); static int com20020_status(struct net_device *dev); static void com20020_setmask(struct net_device *dev, int mask); static int com20020_reset(struct net_device *dev, int really_reset); static void com20020_copy_to_card(struct net_device *dev, int bufnum, int offset, void *buf, int count); static void com20020_copy_from_card(struct net_device *dev, int bufnum, int offset, void *buf, int count); static void com20020_set_mc_list(struct net_device *dev); static void com20020_close(struct net_device *); static void com20020_copy_from_card(struct net_device *dev, int bufnum, int offset, void *buf, int count) { int ioaddr = dev->base_addr, ofs = 512 * bufnum + offset; /* set up the address register */ arcnet_outb((ofs >> 8) | RDDATAflag | AUTOINCflag, ioaddr, COM20020_REG_W_ADDR_HI); arcnet_outb(ofs & 0xff, ioaddr, COM20020_REG_W_ADDR_LO); /* copy the data */ TIME(dev, "insb", count, arcnet_insb(ioaddr, COM20020_REG_RW_MEMDATA, buf, count)); } static void com20020_copy_to_card(struct net_device *dev, int bufnum, int offset, void *buf, int count) { int ioaddr = dev->base_addr, ofs = 512 * bufnum + offset; /* set up the address register */ arcnet_outb((ofs >> 8) | AUTOINCflag, ioaddr, COM20020_REG_W_ADDR_HI); arcnet_outb(ofs & 0xff, ioaddr, COM20020_REG_W_ADDR_LO); /* copy the data */ TIME(dev, "outsb", count, arcnet_outsb(ioaddr, COM20020_REG_RW_MEMDATA, buf, count)); } /* Reset the card and check some basic stuff during the detection stage. */ int com20020_check(struct net_device *dev) { int ioaddr = dev->base_addr, status; struct arcnet_local *lp = netdev_priv(dev); arcnet_outb(XTOcfg(3) | RESETcfg, ioaddr, COM20020_REG_W_CONFIG); udelay(5); arcnet_outb(XTOcfg(3), ioaddr, COM20020_REG_W_CONFIG); mdelay(RESETtime); lp->setup = lp->clockm ? 0 : (lp->clockp << 1); lp->setup2 = (lp->clockm << 4) | 8; /* CHECK: should we do this for SOHARD cards ? */ /* Enable P1Mode for backplane mode */ lp->setup = lp->setup | P1MODE; com20020_set_subaddress(lp, ioaddr, SUB_SETUP1); arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG); if (lp->clockm != 0) { com20020_set_subaddress(lp, ioaddr, SUB_SETUP2); arcnet_outb(lp->setup2, ioaddr, COM20020_REG_W_XREG); /* must now write the magic "restart operation" command */ mdelay(1); arcnet_outb(STARTIOcmd, ioaddr, COM20020_REG_W_COMMAND); } lp->config = (lp->timeout << 3) | (lp->backplane << 2) | SUB_NODE; /* set node ID to 0x42 (but transmitter is disabled, so it's okay) */ arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); arcnet_outb(0x42, ioaddr, COM20020_REG_W_XREG); status = arcnet_inb(ioaddr, COM20020_REG_R_STATUS); if ((status & 0x99) != (NORXflag | TXFREEflag | RESETflag)) { arc_printk(D_NORMAL, dev, "status invalid (%Xh).\n", status); return -ENODEV; } arc_printk(D_INIT_REASONS, dev, "status after reset: %X\n", status); arcnet_outb(CFLAGScmd | RESETclear | CONFIGclear, ioaddr, COM20020_REG_W_COMMAND); status = arcnet_inb(ioaddr, COM20020_REG_R_STATUS); arc_printk(D_INIT_REASONS, dev, "status after reset acknowledged: %X\n", status); /* Read first location of memory */ arcnet_outb(0 | RDDATAflag | AUTOINCflag, ioaddr, COM20020_REG_W_ADDR_HI); arcnet_outb(0, ioaddr, COM20020_REG_W_ADDR_LO); status = arcnet_inb(ioaddr, COM20020_REG_RW_MEMDATA); if (status != TESTvalue) { arc_printk(D_NORMAL, dev, "Signature byte not found (%02Xh != D1h).\n", status); return -ENODEV; } return 0; } static int com20020_set_hwaddr(struct net_device *dev, void *addr) { int ioaddr = dev->base_addr; struct arcnet_local *lp = netdev_priv(dev); struct sockaddr *hwaddr = addr; dev_addr_set(dev, hwaddr->sa_data); com20020_set_subaddress(lp, ioaddr, SUB_NODE); arcnet_outb(dev->dev_addr[0], ioaddr, COM20020_REG_W_XREG); return 0; } static int com20020_netdev_open(struct net_device *dev) { int ioaddr = dev->base_addr; struct arcnet_local *lp = netdev_priv(dev); lp->config |= TXENcfg; arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); return arcnet_open(dev); } static int com20020_netdev_close(struct net_device *dev) { int ioaddr = dev->base_addr; struct arcnet_local *lp = netdev_priv(dev); arcnet_close(dev); /* disable transmitter */ lp->config &= ~TXENcfg; arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); return 0; } const struct net_device_ops com20020_netdev_ops = { .ndo_open = com20020_netdev_open, .ndo_stop = com20020_netdev_close, .ndo_start_xmit = arcnet_send_packet, .ndo_tx_timeout = arcnet_timeout, .ndo_set_mac_address = com20020_set_hwaddr, .ndo_set_rx_mode = com20020_set_mc_list, }; /* Set up the struct net_device associated with this card. Called after * probing succeeds. */ int com20020_found(struct net_device *dev, int shared) { struct arcnet_local *lp; int ioaddr = dev->base_addr; /* Initialize the rest of the device structure. */ lp = netdev_priv(dev); lp->hw.owner = THIS_MODULE; lp->hw.command = com20020_command; lp->hw.status = com20020_status; lp->hw.intmask = com20020_setmask; lp->hw.reset = com20020_reset; lp->hw.copy_to_card = com20020_copy_to_card; lp->hw.copy_from_card = com20020_copy_from_card; lp->hw.close = com20020_close; /* FIXME: do this some other way! */ if (!dev->dev_addr[0]) arcnet_set_addr(dev, arcnet_inb(ioaddr, 8)); com20020_set_subaddress(lp, ioaddr, SUB_SETUP1); arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG); if (lp->card_flags & ARC_CAN_10MBIT) { com20020_set_subaddress(lp, ioaddr, SUB_SETUP2); arcnet_outb(lp->setup2, ioaddr, COM20020_REG_W_XREG); /* must now write the magic "restart operation" command */ mdelay(1); arcnet_outb(STARTIOcmd, ioaddr, COM20020_REG_W_COMMAND); } lp->config = (lp->timeout << 3) | (lp->backplane << 2) | SUB_NODE; /* Default 0x38 + register: Node ID */ arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); arcnet_outb(dev->dev_addr[0], ioaddr, COM20020_REG_W_XREG); /* reserve the irq */ if (request_irq(dev->irq, arcnet_interrupt, shared, "arcnet (COM20020)", dev)) { arc_printk(D_NORMAL, dev, "Can't get IRQ %d!\n", dev->irq); return -ENODEV; } arc_printk(D_NORMAL, dev, "%s: station %02Xh found at %03lXh, IRQ %d.\n", lp->card_name, dev->dev_addr[0], dev->base_addr, dev->irq); if (lp->backplane) arc_printk(D_NORMAL, dev, "Using backplane mode.\n"); if (lp->timeout != 3) arc_printk(D_NORMAL, dev, "Using extended timeout value of %d\n", lp->timeout); arc_printk(D_NORMAL, dev, "Using CKP %d - data rate %s\n", lp->setup >> 1, clockrates[3 - ((lp->setup2 & 0xF0) >> 4) + ((lp->setup & 0x0F) >> 1)]); /* The clockrates array index looks very fragile. * It seems like it could have negative indexing. */ if (register_netdev(dev)) { free_irq(dev->irq, dev); return -EIO; } return 0; } /* Do a hardware reset on the card, and set up necessary registers. * * This should be called as little as possible, because it disrupts the * token on the network (causes a RECON) and requires a significant delay. * * However, it does make sure the card is in a defined state. */ static int com20020_reset(struct net_device *dev, int really_reset) { struct arcnet_local *lp = netdev_priv(dev); u_int ioaddr = dev->base_addr; u_char inbyte; arc_printk(D_DEBUG, dev, "%s: %d: %s: dev: %p, lp: %p, dev->name: %s\n", __FILE__, __LINE__, __func__, dev, lp, dev->name); arc_printk(D_INIT, dev, "Resetting %s (status=%02Xh)\n", dev->name, arcnet_inb(ioaddr, COM20020_REG_R_STATUS)); arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); lp->config |= (lp->timeout << 3) | (lp->backplane << 2); /* power-up defaults */ arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); if (really_reset) { /* reset the card */ arcnet_outb(lp->config | RESETcfg, ioaddr, COM20020_REG_W_CONFIG); udelay(5); arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); mdelay(RESETtime * 2); /* COM20020 seems to be slower sometimes */ } /* clear flags & end reset */ arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); arcnet_outb(CFLAGScmd | RESETclear | CONFIGclear, ioaddr, COM20020_REG_W_COMMAND); /* verify that the ARCnet signature byte is present */ arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); com20020_copy_from_card(dev, 0, 0, &inbyte, 1); arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); if (inbyte != TESTvalue) { arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); arc_printk(D_NORMAL, dev, "reset failed: TESTvalue not present.\n"); return 1; } /* enable extended (512-byte) packets */ arcnet_outb(CONFIGcmd | EXTconf, ioaddr, COM20020_REG_W_COMMAND); arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); /* done! return success. */ return 0; } static void com20020_setmask(struct net_device *dev, int mask) { u_int ioaddr = dev->base_addr; arc_printk(D_DURING, dev, "Setting mask to %x at %x\n", mask, ioaddr); arcnet_outb(mask, ioaddr, COM20020_REG_W_INTMASK); } static void com20020_command(struct net_device *dev, int cmd) { u_int ioaddr = dev->base_addr; arcnet_outb(cmd, ioaddr, COM20020_REG_W_COMMAND); } static int com20020_status(struct net_device *dev) { u_int ioaddr = dev->base_addr; return arcnet_inb(ioaddr, COM20020_REG_R_STATUS) + (arcnet_inb(ioaddr, COM20020_REG_R_DIAGSTAT) << 8); } static void com20020_close(struct net_device *dev) { struct arcnet_local *lp = netdev_priv(dev); int ioaddr = dev->base_addr; /* disable transmitter */ lp->config &= ~TXENcfg; arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); } /* Set or clear the multicast filter for this adaptor. * num_addrs == -1 Promiscuous mode, receive all packets * num_addrs == 0 Normal mode, clear multicast list * num_addrs > 0 Multicast mode, receive normal and MC packets, and do * best-effort filtering. * FIXME - do multicast stuff, not just promiscuous. */ static void com20020_set_mc_list(struct net_device *dev) { struct arcnet_local *lp = netdev_priv(dev); int ioaddr = dev->base_addr; if ((dev->flags & IFF_PROMISC) && (dev->flags & IFF_UP)) { /* Enable promiscuous mode */ if (!(lp->setup & PROMISCset)) arc_printk(D_NORMAL, dev, "Setting promiscuous flag...\n"); com20020_set_subaddress(lp, ioaddr, SUB_SETUP1); lp->setup |= PROMISCset; arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG); } else { /* Disable promiscuous mode, use normal mode */ if ((lp->setup & PROMISCset)) arc_printk(D_NORMAL, dev, "Resetting promiscuous flag...\n"); com20020_set_subaddress(lp, ioaddr, SUB_SETUP1); lp->setup &= ~PROMISCset; arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG); } } #if defined(CONFIG_ARCNET_COM20020_PCI_MODULE) || \ defined(CONFIG_ARCNET_COM20020_ISA_MODULE) || \ defined(CONFIG_ARCNET_COM20020_CS_MODULE) EXPORT_SYMBOL(com20020_check); EXPORT_SYMBOL(com20020_found); EXPORT_SYMBOL(com20020_netdev_ops); #endif MODULE_LICENSE("GPL"); #ifdef MODULE static int __init com20020_module_init(void) { if (BUGLVL(D_NORMAL)) pr_info("%s\n", "COM20020 chipset support (by David Woodhouse et al.)"); return 0; } static void __exit com20020_module_exit(void) { } module_init(com20020_module_init); module_exit(com20020_module_exit); #endif /* MODULE */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1