Contributors: 16
Author Tokens Token Proportion Commits Commit Proportion
Lennert Buytenhek 611 40.20% 3 6.38%
Andrew Lunn 441 29.01% 11 23.40%
Russell King 144 9.47% 1 2.13%
Vivien Didelot 84 5.53% 12 25.53%
Barry Grussling 48 3.16% 2 4.26%
Neil Armstrong 46 3.03% 2 4.26%
Guenter Roeck 43 2.83% 2 4.26%
Vladimir Oltean 27 1.78% 1 2.13%
Ben Hutchings 23 1.51% 3 6.38%
Sergei Antonov 14 0.92% 1 2.13%
Florian Fainelli 13 0.86% 4 8.51%
John Crispin 9 0.59% 1 2.13%
Peter Korsgaard 8 0.53% 1 2.13%
Anderson Luiz Alves 3 0.20% 1 2.13%
Paul Gortmaker 3 0.20% 1 2.13%
Gustavo A. R. Silva 3 0.20% 1 2.13%
Total 1520 47


// SPDX-License-Identifier: GPL-2.0+
/*
 * net/dsa/mv88e6060.c - Driver for Marvell 88e6060 switch chips
 * Copyright (c) 2008-2009 Marvell Semiconductor
 */

#include <linux/delay.h>
#include <linux/etherdevice.h>
#include <linux/jiffies.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/phy.h>
#include <net/dsa.h>
#include "mv88e6060.h"

static int reg_read(struct mv88e6060_priv *priv, int addr, int reg)
{
	return mdiobus_read_nested(priv->bus, priv->sw_addr + addr, reg);
}

static int reg_write(struct mv88e6060_priv *priv, int addr, int reg, u16 val)
{
	return mdiobus_write_nested(priv->bus, priv->sw_addr + addr, reg, val);
}

static const char *mv88e6060_get_name(struct mii_bus *bus, int sw_addr)
{
	int ret;

	ret = mdiobus_read(bus, sw_addr + REG_PORT(0), PORT_SWITCH_ID);
	if (ret >= 0) {
		if (ret == PORT_SWITCH_ID_6060)
			return "Marvell 88E6060 (A0)";
		if (ret == PORT_SWITCH_ID_6060_R1 ||
		    ret == PORT_SWITCH_ID_6060_R2)
			return "Marvell 88E6060 (B0)";
		if ((ret & PORT_SWITCH_ID_6060_MASK) == PORT_SWITCH_ID_6060)
			return "Marvell 88E6060";
	}

	return NULL;
}

static enum dsa_tag_protocol mv88e6060_get_tag_protocol(struct dsa_switch *ds,
							int port,
							enum dsa_tag_protocol m)
{
	return DSA_TAG_PROTO_TRAILER;
}

static int mv88e6060_switch_reset(struct mv88e6060_priv *priv)
{
	int i;
	int ret;
	unsigned long timeout;

	/* Set all ports to the disabled state. */
	for (i = 0; i < MV88E6060_PORTS; i++) {
		ret = reg_read(priv, REG_PORT(i), PORT_CONTROL);
		if (ret < 0)
			return ret;
		ret = reg_write(priv, REG_PORT(i), PORT_CONTROL,
				ret & ~PORT_CONTROL_STATE_MASK);
		if (ret)
			return ret;
	}

	/* Wait for transmit queues to drain. */
	usleep_range(2000, 4000);

	/* Reset the switch. */
	ret = reg_write(priv, REG_GLOBAL, GLOBAL_ATU_CONTROL,
			GLOBAL_ATU_CONTROL_SWRESET |
			GLOBAL_ATU_CONTROL_LEARNDIS);
	if (ret)
		return ret;

	/* Wait up to one second for reset to complete. */
	timeout = jiffies + 1 * HZ;
	while (time_before(jiffies, timeout)) {
		ret = reg_read(priv, REG_GLOBAL, GLOBAL_STATUS);
		if (ret < 0)
			return ret;

		if (ret & GLOBAL_STATUS_INIT_READY)
			break;

		usleep_range(1000, 2000);
	}
	if (time_after(jiffies, timeout))
		return -ETIMEDOUT;

	return 0;
}

static int mv88e6060_setup_global(struct mv88e6060_priv *priv)
{
	int ret;

	/* Disable discarding of frames with excessive collisions,
	 * set the maximum frame size to 1536 bytes, and mask all
	 * interrupt sources.
	 */
	ret = reg_write(priv, REG_GLOBAL, GLOBAL_CONTROL,
			GLOBAL_CONTROL_MAX_FRAME_1536);
	if (ret)
		return ret;

	/* Disable automatic address learning.
	 */
	return reg_write(priv, REG_GLOBAL, GLOBAL_ATU_CONTROL,
			 GLOBAL_ATU_CONTROL_LEARNDIS);
}

static int mv88e6060_setup_port(struct mv88e6060_priv *priv, int p)
{
	int addr = REG_PORT(p);
	int ret;

	if (dsa_is_unused_port(priv->ds, p))
		return 0;

	/* Do not force flow control, disable Ingress and Egress
	 * Header tagging, disable VLAN tunneling, and set the port
	 * state to Forwarding.  Additionally, if this is the CPU
	 * port, enable Ingress and Egress Trailer tagging mode.
	 */
	ret = reg_write(priv, addr, PORT_CONTROL,
			dsa_is_cpu_port(priv->ds, p) ?
			PORT_CONTROL_TRAILER |
			PORT_CONTROL_INGRESS_MODE |
			PORT_CONTROL_STATE_FORWARDING :
			PORT_CONTROL_STATE_FORWARDING);
	if (ret)
		return ret;

	/* Port based VLAN map: give each port its own address
	 * database, allow the CPU port to talk to each of the 'real'
	 * ports, and allow each of the 'real' ports to only talk to
	 * the CPU port.
	 */
	ret = reg_write(priv, addr, PORT_VLAN_MAP,
			((p & 0xf) << PORT_VLAN_MAP_DBNUM_SHIFT) |
			(dsa_is_cpu_port(priv->ds, p) ?
			 dsa_user_ports(priv->ds) :
			 BIT(dsa_to_port(priv->ds, p)->cpu_dp->index)));
	if (ret)
		return ret;

	/* Port Association Vector: when learning source addresses
	 * of packets, add the address to the address database using
	 * a port bitmap that has only the bit for this port set and
	 * the other bits clear.
	 */
	return reg_write(priv, addr, PORT_ASSOC_VECTOR, BIT(p));
}

static int mv88e6060_setup_addr(struct mv88e6060_priv *priv)
{
	u8 addr[ETH_ALEN];
	int ret;
	u16 val;

	eth_random_addr(addr);

	val = addr[0] << 8 | addr[1];

	/* The multicast bit is always transmitted as a zero, so the switch uses
	 * bit 8 for "DiffAddr", where 0 means all ports transmit the same SA.
	 */
	val &= 0xfeff;

	ret = reg_write(priv, REG_GLOBAL, GLOBAL_MAC_01, val);
	if (ret)
		return ret;

	ret = reg_write(priv, REG_GLOBAL, GLOBAL_MAC_23,
			(addr[2] << 8) | addr[3]);
	if (ret)
		return ret;

	return reg_write(priv, REG_GLOBAL, GLOBAL_MAC_45,
			 (addr[4] << 8) | addr[5]);
}

static int mv88e6060_setup(struct dsa_switch *ds)
{
	struct mv88e6060_priv *priv = ds->priv;
	int ret;
	int i;

	priv->ds = ds;

	ret = mv88e6060_switch_reset(priv);
	if (ret < 0)
		return ret;

	/* @@@ initialise atu */

	ret = mv88e6060_setup_global(priv);
	if (ret < 0)
		return ret;

	ret = mv88e6060_setup_addr(priv);
	if (ret < 0)
		return ret;

	for (i = 0; i < MV88E6060_PORTS; i++) {
		ret = mv88e6060_setup_port(priv, i);
		if (ret < 0)
			return ret;
	}

	return 0;
}

static int mv88e6060_port_to_phy_addr(int port)
{
	if (port >= 0 && port < MV88E6060_PORTS)
		return port;
	return -1;
}

static int mv88e6060_phy_read(struct dsa_switch *ds, int port, int regnum)
{
	struct mv88e6060_priv *priv = ds->priv;
	int addr;

	addr = mv88e6060_port_to_phy_addr(port);
	if (addr == -1)
		return 0xffff;

	return reg_read(priv, addr, regnum);
}

static int
mv88e6060_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
{
	struct mv88e6060_priv *priv = ds->priv;
	int addr;

	addr = mv88e6060_port_to_phy_addr(port);
	if (addr == -1)
		return 0xffff;

	return reg_write(priv, addr, regnum, val);
}

static void mv88e6060_phylink_get_caps(struct dsa_switch *ds, int port,
				       struct phylink_config *config)
{
	unsigned long *interfaces = config->supported_interfaces;
	struct mv88e6060_priv *priv = ds->priv;
	int addr = REG_PORT(port);
	int ret;

	ret = reg_read(priv, addr, PORT_STATUS);
	if (ret < 0) {
		dev_err(ds->dev,
			"port %d: unable to read status register: %pe\n",
			port, ERR_PTR(ret));
		return;
	}

	/* If the port is configured in SNI mode (acts as a 10Mbps PHY),
	 * it should have phy-mode = "sni", but that doesn't yet exist, so
	 * forcibly fail validation until the need arises to introduce it.
	 */
	if (!(ret & PORT_STATUS_PORTMODE)) {
		dev_warn(ds->dev, "port %d: SNI mode not supported\n", port);
		return;
	}

	config->mac_capabilities = MAC_100 | MAC_10 | MAC_SYM_PAUSE;

	if (port >= 4) {
		/* Ports 4 and 5 can support MII, REVMII and REVRMII modes */
		__set_bit(PHY_INTERFACE_MODE_MII, interfaces);
		__set_bit(PHY_INTERFACE_MODE_REVMII, interfaces);
		__set_bit(PHY_INTERFACE_MODE_REVRMII, interfaces);
	}
	if (port <= 4) {
		/* Ports 0 to 3 have internal PHYs, and port 4 can optionally
		 * use an internal PHY.
		 */
		/* Internal PHY */
		__set_bit(PHY_INTERFACE_MODE_INTERNAL, interfaces);
		/* Default phylib interface mode */
		__set_bit(PHY_INTERFACE_MODE_GMII, interfaces);
	}
}

static const struct dsa_switch_ops mv88e6060_switch_ops = {
	.get_tag_protocol = mv88e6060_get_tag_protocol,
	.setup		= mv88e6060_setup,
	.phy_read	= mv88e6060_phy_read,
	.phy_write	= mv88e6060_phy_write,
	.phylink_get_caps = mv88e6060_phylink_get_caps,
};

static int mv88e6060_probe(struct mdio_device *mdiodev)
{
	struct device *dev = &mdiodev->dev;
	struct mv88e6060_priv *priv;
	struct dsa_switch *ds;
	const char *name;

	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
	if (!priv)
		return -ENOMEM;

	priv->bus = mdiodev->bus;
	priv->sw_addr = mdiodev->addr;

	name = mv88e6060_get_name(priv->bus, priv->sw_addr);
	if (!name)
		return -ENODEV;

	dev_info(dev, "switch %s detected\n", name);

	ds = devm_kzalloc(dev, sizeof(*ds), GFP_KERNEL);
	if (!ds)
		return -ENOMEM;

	ds->dev = dev;
	ds->num_ports = MV88E6060_PORTS;
	ds->priv = priv;
	ds->dev = dev;
	ds->ops = &mv88e6060_switch_ops;

	dev_set_drvdata(dev, ds);

	return dsa_register_switch(ds);
}

static void mv88e6060_remove(struct mdio_device *mdiodev)
{
	struct dsa_switch *ds = dev_get_drvdata(&mdiodev->dev);

	if (!ds)
		return;

	dsa_unregister_switch(ds);
}

static void mv88e6060_shutdown(struct mdio_device *mdiodev)
{
	struct dsa_switch *ds = dev_get_drvdata(&mdiodev->dev);

	if (!ds)
		return;

	dsa_switch_shutdown(ds);

	dev_set_drvdata(&mdiodev->dev, NULL);
}

static const struct of_device_id mv88e6060_of_match[] = {
	{
		.compatible = "marvell,mv88e6060",
	},
	{ /* sentinel */ },
};

static struct mdio_driver mv88e6060_driver = {
	.probe	= mv88e6060_probe,
	.remove = mv88e6060_remove,
	.shutdown = mv88e6060_shutdown,
	.mdiodrv.driver = {
		.name = "mv88e6060",
		.of_match_table = mv88e6060_of_match,
	},
};

mdio_module_driver(mv88e6060_driver);

MODULE_AUTHOR("Lennert Buytenhek <buytenh@wantstofly.org>");
MODULE_DESCRIPTION("Driver for Marvell 88E6060 ethernet switch chip");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:mv88e6060");