| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Pavan Kumar Linga | 2386 | 100.00% | 2 | 100.00% |
| Total | 2386 | 2 |
/* SPDX-License-Identifier: GPL-2.0-only */ /* Copyright (C) 2023 Intel Corporation */ #ifndef _VIRTCHNL2_H_ #define _VIRTCHNL2_H_ /* All opcodes associated with virtchnl2 are prefixed with virtchnl2 or * VIRTCHNL2. Any future opcodes, offloads/capabilities, structures, * and defines must be prefixed with virtchnl2 or VIRTCHNL2 to avoid confusion. * * PF/VF uses the virtchnl2 interface defined in this header file to communicate * with device Control Plane (CP). Driver and the CP may run on different * platforms with different endianness. To avoid byte order discrepancies, * all the structures in this header follow little-endian format. * * This is an interface definition file where existing enums and their values * must remain unchanged over time, so we specify explicit values for all enums. */ #include "virtchnl2_lan_desc.h" /* This macro is used to generate compilation errors if a structure * is not exactly the correct length. */ #define VIRTCHNL2_CHECK_STRUCT_LEN(n, X) \ static_assert((n) == sizeof(struct X)) /* New major set of opcodes introduced and so leaving room for * old misc opcodes to be added in future. Also these opcodes may only * be used if both the PF and VF have successfully negotiated the * VIRTCHNL version as 2.0 during VIRTCHNL2_OP_VERSION exchange. */ enum virtchnl2_op { VIRTCHNL2_OP_UNKNOWN = 0, VIRTCHNL2_OP_VERSION = 1, VIRTCHNL2_OP_GET_CAPS = 500, VIRTCHNL2_OP_CREATE_VPORT = 501, VIRTCHNL2_OP_DESTROY_VPORT = 502, VIRTCHNL2_OP_ENABLE_VPORT = 503, VIRTCHNL2_OP_DISABLE_VPORT = 504, VIRTCHNL2_OP_CONFIG_TX_QUEUES = 505, VIRTCHNL2_OP_CONFIG_RX_QUEUES = 506, VIRTCHNL2_OP_ENABLE_QUEUES = 507, VIRTCHNL2_OP_DISABLE_QUEUES = 508, VIRTCHNL2_OP_ADD_QUEUES = 509, VIRTCHNL2_OP_DEL_QUEUES = 510, VIRTCHNL2_OP_MAP_QUEUE_VECTOR = 511, VIRTCHNL2_OP_UNMAP_QUEUE_VECTOR = 512, VIRTCHNL2_OP_GET_RSS_KEY = 513, VIRTCHNL2_OP_SET_RSS_KEY = 514, VIRTCHNL2_OP_GET_RSS_LUT = 515, VIRTCHNL2_OP_SET_RSS_LUT = 516, VIRTCHNL2_OP_GET_RSS_HASH = 517, VIRTCHNL2_OP_SET_RSS_HASH = 518, VIRTCHNL2_OP_SET_SRIOV_VFS = 519, VIRTCHNL2_OP_ALLOC_VECTORS = 520, VIRTCHNL2_OP_DEALLOC_VECTORS = 521, VIRTCHNL2_OP_EVENT = 522, VIRTCHNL2_OP_GET_STATS = 523, VIRTCHNL2_OP_RESET_VF = 524, VIRTCHNL2_OP_GET_EDT_CAPS = 525, VIRTCHNL2_OP_GET_PTYPE_INFO = 526, /* Opcode 527 and 528 are reserved for VIRTCHNL2_OP_GET_PTYPE_ID and * VIRTCHNL2_OP_GET_PTYPE_INFO_RAW. * Opcodes 529, 530, 531, 532 and 533 are reserved. */ VIRTCHNL2_OP_LOOPBACK = 534, VIRTCHNL2_OP_ADD_MAC_ADDR = 535, VIRTCHNL2_OP_DEL_MAC_ADDR = 536, VIRTCHNL2_OP_CONFIG_PROMISCUOUS_MODE = 537, }; /** * enum virtchnl2_vport_type - Type of virtual port. * @VIRTCHNL2_VPORT_TYPE_DEFAULT: Default virtual port type. */ enum virtchnl2_vport_type { VIRTCHNL2_VPORT_TYPE_DEFAULT = 0, }; /** * enum virtchnl2_queue_model - Type of queue model. * @VIRTCHNL2_QUEUE_MODEL_SINGLE: Single queue model. * @VIRTCHNL2_QUEUE_MODEL_SPLIT: Split queue model. * * In the single queue model, the same transmit descriptor queue is used by * software to post descriptors to hardware and by hardware to post completed * descriptors to software. * Likewise, the same receive descriptor queue is used by hardware to post * completions to software and by software to post buffers to hardware. * * In the split queue model, hardware uses transmit completion queues to post * descriptor/buffer completions to software, while software uses transmit * descriptor queues to post descriptors to hardware. * Likewise, hardware posts descriptor completions to the receive descriptor * queue, while software uses receive buffer queues to post buffers to hardware. */ enum virtchnl2_queue_model { VIRTCHNL2_QUEUE_MODEL_SINGLE = 0, VIRTCHNL2_QUEUE_MODEL_SPLIT = 1, }; /* Checksum offload capability flags */ enum virtchnl2_cap_txrx_csum { VIRTCHNL2_CAP_TX_CSUM_L3_IPV4 = BIT(0), VIRTCHNL2_CAP_TX_CSUM_L4_IPV4_TCP = BIT(1), VIRTCHNL2_CAP_TX_CSUM_L4_IPV4_UDP = BIT(2), VIRTCHNL2_CAP_TX_CSUM_L4_IPV4_SCTP = BIT(3), VIRTCHNL2_CAP_TX_CSUM_L4_IPV6_TCP = BIT(4), VIRTCHNL2_CAP_TX_CSUM_L4_IPV6_UDP = BIT(5), VIRTCHNL2_CAP_TX_CSUM_L4_IPV6_SCTP = BIT(6), VIRTCHNL2_CAP_TX_CSUM_GENERIC = BIT(7), VIRTCHNL2_CAP_RX_CSUM_L3_IPV4 = BIT(8), VIRTCHNL2_CAP_RX_CSUM_L4_IPV4_TCP = BIT(9), VIRTCHNL2_CAP_RX_CSUM_L4_IPV4_UDP = BIT(10), VIRTCHNL2_CAP_RX_CSUM_L4_IPV4_SCTP = BIT(11), VIRTCHNL2_CAP_RX_CSUM_L4_IPV6_TCP = BIT(12), VIRTCHNL2_CAP_RX_CSUM_L4_IPV6_UDP = BIT(13), VIRTCHNL2_CAP_RX_CSUM_L4_IPV6_SCTP = BIT(14), VIRTCHNL2_CAP_RX_CSUM_GENERIC = BIT(15), VIRTCHNL2_CAP_TX_CSUM_L3_SINGLE_TUNNEL = BIT(16), VIRTCHNL2_CAP_TX_CSUM_L3_DOUBLE_TUNNEL = BIT(17), VIRTCHNL2_CAP_RX_CSUM_L3_SINGLE_TUNNEL = BIT(18), VIRTCHNL2_CAP_RX_CSUM_L3_DOUBLE_TUNNEL = BIT(19), VIRTCHNL2_CAP_TX_CSUM_L4_SINGLE_TUNNEL = BIT(20), VIRTCHNL2_CAP_TX_CSUM_L4_DOUBLE_TUNNEL = BIT(21), VIRTCHNL2_CAP_RX_CSUM_L4_SINGLE_TUNNEL = BIT(22), VIRTCHNL2_CAP_RX_CSUM_L4_DOUBLE_TUNNEL = BIT(23), }; /* Segmentation offload capability flags */ enum virtchnl2_cap_seg { VIRTCHNL2_CAP_SEG_IPV4_TCP = BIT(0), VIRTCHNL2_CAP_SEG_IPV4_UDP = BIT(1), VIRTCHNL2_CAP_SEG_IPV4_SCTP = BIT(2), VIRTCHNL2_CAP_SEG_IPV6_TCP = BIT(3), VIRTCHNL2_CAP_SEG_IPV6_UDP = BIT(4), VIRTCHNL2_CAP_SEG_IPV6_SCTP = BIT(5), VIRTCHNL2_CAP_SEG_GENERIC = BIT(6), VIRTCHNL2_CAP_SEG_TX_SINGLE_TUNNEL = BIT(7), VIRTCHNL2_CAP_SEG_TX_DOUBLE_TUNNEL = BIT(8), }; /* Receive Side Scaling Flow type capability flags */ enum virtchnl2_cap_rss { VIRTCHNL2_CAP_RSS_IPV4_TCP = BIT(0), VIRTCHNL2_CAP_RSS_IPV4_UDP = BIT(1), VIRTCHNL2_CAP_RSS_IPV4_SCTP = BIT(2), VIRTCHNL2_CAP_RSS_IPV4_OTHER = BIT(3), VIRTCHNL2_CAP_RSS_IPV6_TCP = BIT(4), VIRTCHNL2_CAP_RSS_IPV6_UDP = BIT(5), VIRTCHNL2_CAP_RSS_IPV6_SCTP = BIT(6), VIRTCHNL2_CAP_RSS_IPV6_OTHER = BIT(7), VIRTCHNL2_CAP_RSS_IPV4_AH = BIT(8), VIRTCHNL2_CAP_RSS_IPV4_ESP = BIT(9), VIRTCHNL2_CAP_RSS_IPV4_AH_ESP = BIT(10), VIRTCHNL2_CAP_RSS_IPV6_AH = BIT(11), VIRTCHNL2_CAP_RSS_IPV6_ESP = BIT(12), VIRTCHNL2_CAP_RSS_IPV6_AH_ESP = BIT(13), }; /* Header split capability flags */ enum virtchnl2_cap_rx_hsplit_at { /* for prepended metadata */ VIRTCHNL2_CAP_RX_HSPLIT_AT_L2 = BIT(0), /* all VLANs go into header buffer */ VIRTCHNL2_CAP_RX_HSPLIT_AT_L3 = BIT(1), VIRTCHNL2_CAP_RX_HSPLIT_AT_L4V4 = BIT(2), VIRTCHNL2_CAP_RX_HSPLIT_AT_L4V6 = BIT(3), }; /* Receive Side Coalescing offload capability flags */ enum virtchnl2_cap_rsc { VIRTCHNL2_CAP_RSC_IPV4_TCP = BIT(0), VIRTCHNL2_CAP_RSC_IPV4_SCTP = BIT(1), VIRTCHNL2_CAP_RSC_IPV6_TCP = BIT(2), VIRTCHNL2_CAP_RSC_IPV6_SCTP = BIT(3), }; /* Other capability flags */ enum virtchnl2_cap_other { VIRTCHNL2_CAP_RDMA = BIT_ULL(0), VIRTCHNL2_CAP_SRIOV = BIT_ULL(1), VIRTCHNL2_CAP_MACFILTER = BIT_ULL(2), VIRTCHNL2_CAP_FLOW_DIRECTOR = BIT_ULL(3), /* Queue based scheduling using split queue model */ VIRTCHNL2_CAP_SPLITQ_QSCHED = BIT_ULL(4), VIRTCHNL2_CAP_CRC = BIT_ULL(5), VIRTCHNL2_CAP_ADQ = BIT_ULL(6), VIRTCHNL2_CAP_WB_ON_ITR = BIT_ULL(7), VIRTCHNL2_CAP_PROMISC = BIT_ULL(8), VIRTCHNL2_CAP_LINK_SPEED = BIT_ULL(9), VIRTCHNL2_CAP_INLINE_IPSEC = BIT_ULL(10), VIRTCHNL2_CAP_LARGE_NUM_QUEUES = BIT_ULL(11), VIRTCHNL2_CAP_VLAN = BIT_ULL(12), VIRTCHNL2_CAP_PTP = BIT_ULL(13), /* EDT: Earliest Departure Time capability used for Timing Wheel */ VIRTCHNL2_CAP_EDT = BIT_ULL(14), VIRTCHNL2_CAP_ADV_RSS = BIT_ULL(15), VIRTCHNL2_CAP_FDIR = BIT_ULL(16), VIRTCHNL2_CAP_RX_FLEX_DESC = BIT_ULL(17), VIRTCHNL2_CAP_PTYPE = BIT_ULL(18), VIRTCHNL2_CAP_LOOPBACK = BIT_ULL(19), /* Other capability 20 is reserved */ /* this must be the last capability */ VIRTCHNL2_CAP_OEM = BIT_ULL(63), }; /* underlying device type */ enum virtchl2_device_type { VIRTCHNL2_MEV_DEVICE = 0, }; /** * enum virtchnl2_txq_sched_mode - Transmit Queue Scheduling Modes. * @VIRTCHNL2_TXQ_SCHED_MODE_QUEUE: Queue mode is the legacy mode i.e. inorder * completions where descriptors and buffers * are completed at the same time. * @VIRTCHNL2_TXQ_SCHED_MODE_FLOW: Flow scheduling mode allows for out of order * packet processing where descriptors are * cleaned in order, but buffers can be * completed out of order. */ enum virtchnl2_txq_sched_mode { VIRTCHNL2_TXQ_SCHED_MODE_QUEUE = 0, VIRTCHNL2_TXQ_SCHED_MODE_FLOW = 1, }; /** * enum virtchnl2_rxq_flags - Receive Queue Feature flags. * @VIRTCHNL2_RXQ_RSC: Rx queue RSC flag. * @VIRTCHNL2_RXQ_HDR_SPLIT: Rx queue header split flag. * @VIRTCHNL2_RXQ_IMMEDIATE_WRITE_BACK: When set, packet descriptors are flushed * by hardware immediately after processing * each packet. * @VIRTCHNL2_RX_DESC_SIZE_16BYTE: Rx queue 16 byte descriptor size. * @VIRTCHNL2_RX_DESC_SIZE_32BYTE: Rx queue 32 byte descriptor size. */ enum virtchnl2_rxq_flags { VIRTCHNL2_RXQ_RSC = BIT(0), VIRTCHNL2_RXQ_HDR_SPLIT = BIT(1), VIRTCHNL2_RXQ_IMMEDIATE_WRITE_BACK = BIT(2), VIRTCHNL2_RX_DESC_SIZE_16BYTE = BIT(3), VIRTCHNL2_RX_DESC_SIZE_32BYTE = BIT(4), }; /* Type of RSS algorithm */ enum virtchnl2_rss_alg { VIRTCHNL2_RSS_ALG_TOEPLITZ_ASYMMETRIC = 0, VIRTCHNL2_RSS_ALG_R_ASYMMETRIC = 1, VIRTCHNL2_RSS_ALG_TOEPLITZ_SYMMETRIC = 2, VIRTCHNL2_RSS_ALG_XOR_SYMMETRIC = 3, }; /* Type of event */ enum virtchnl2_event_codes { VIRTCHNL2_EVENT_UNKNOWN = 0, VIRTCHNL2_EVENT_LINK_CHANGE = 1, /* Event type 2, 3 are reserved */ }; /* Transmit and Receive queue types are valid in legacy as well as split queue * models. With Split Queue model, 2 additional types are introduced - * TX_COMPLETION and RX_BUFFER. In split queue model, receive corresponds to * the queue where hardware posts completions. */ enum virtchnl2_queue_type { VIRTCHNL2_QUEUE_TYPE_TX = 0, VIRTCHNL2_QUEUE_TYPE_RX = 1, VIRTCHNL2_QUEUE_TYPE_TX_COMPLETION = 2, VIRTCHNL2_QUEUE_TYPE_RX_BUFFER = 3, VIRTCHNL2_QUEUE_TYPE_CONFIG_TX = 4, VIRTCHNL2_QUEUE_TYPE_CONFIG_RX = 5, /* Queue types 6, 7, 8, 9 are reserved */ VIRTCHNL2_QUEUE_TYPE_MBX_TX = 10, VIRTCHNL2_QUEUE_TYPE_MBX_RX = 11, }; /* Interrupt throttling rate index */ enum virtchnl2_itr_idx { VIRTCHNL2_ITR_IDX_0 = 0, VIRTCHNL2_ITR_IDX_1 = 1, }; /** * enum virtchnl2_mac_addr_type - MAC address types. * @VIRTCHNL2_MAC_ADDR_PRIMARY: PF/VF driver should set this type for the * primary/device unicast MAC address filter for * VIRTCHNL2_OP_ADD_MAC_ADDR and * VIRTCHNL2_OP_DEL_MAC_ADDR. This allows for the * underlying control plane function to accurately * track the MAC address and for VM/function reset. * * @VIRTCHNL2_MAC_ADDR_EXTRA: PF/VF driver should set this type for any extra * unicast and/or multicast filters that are being * added/deleted via VIRTCHNL2_OP_ADD_MAC_ADDR or * VIRTCHNL2_OP_DEL_MAC_ADDR. */ enum virtchnl2_mac_addr_type { VIRTCHNL2_MAC_ADDR_PRIMARY = 1, VIRTCHNL2_MAC_ADDR_EXTRA = 2, }; /* Flags used for promiscuous mode */ enum virtchnl2_promisc_flags { VIRTCHNL2_UNICAST_PROMISC = BIT(0), VIRTCHNL2_MULTICAST_PROMISC = BIT(1), }; /* Protocol header type within a packet segment. A segment consists of one or * more protocol headers that make up a logical group of protocol headers. Each * logical group of protocol headers encapsulates or is encapsulated using/by * tunneling or encapsulation protocols for network virtualization. */ enum virtchnl2_proto_hdr_type { /* VIRTCHNL2_PROTO_HDR_ANY is a mandatory protocol id */ VIRTCHNL2_PROTO_HDR_ANY = 0, VIRTCHNL2_PROTO_HDR_PRE_MAC = 1, /* VIRTCHNL2_PROTO_HDR_MAC is a mandatory protocol id */ VIRTCHNL2_PROTO_HDR_MAC = 2, VIRTCHNL2_PROTO_HDR_POST_MAC = 3, VIRTCHNL2_PROTO_HDR_ETHERTYPE = 4, VIRTCHNL2_PROTO_HDR_VLAN = 5, VIRTCHNL2_PROTO_HDR_SVLAN = 6, VIRTCHNL2_PROTO_HDR_CVLAN = 7, VIRTCHNL2_PROTO_HDR_MPLS = 8, VIRTCHNL2_PROTO_HDR_UMPLS = 9, VIRTCHNL2_PROTO_HDR_MMPLS = 10, VIRTCHNL2_PROTO_HDR_PTP = 11, VIRTCHNL2_PROTO_HDR_CTRL = 12, VIRTCHNL2_PROTO_HDR_LLDP = 13, VIRTCHNL2_PROTO_HDR_ARP = 14, VIRTCHNL2_PROTO_HDR_ECP = 15, VIRTCHNL2_PROTO_HDR_EAPOL = 16, VIRTCHNL2_PROTO_HDR_PPPOD = 17, VIRTCHNL2_PROTO_HDR_PPPOE = 18, /* VIRTCHNL2_PROTO_HDR_IPV4 is a mandatory protocol id */ VIRTCHNL2_PROTO_HDR_IPV4 = 19, /* IPv4 and IPv6 Fragment header types are only associated to * VIRTCHNL2_PROTO_HDR_IPV4 and VIRTCHNL2_PROTO_HDR_IPV6 respectively, * cannot be used independently. */ /* VIRTCHNL2_PROTO_HDR_IPV4_FRAG is a mandatory protocol id */ VIRTCHNL2_PROTO_HDR_IPV4_FRAG = 20, /* VIRTCHNL2_PROTO_HDR_IPV6 is a mandatory protocol id */ VIRTCHNL2_PROTO_HDR_IPV6 = 21, /* VIRTCHNL2_PROTO_HDR_IPV6_FRAG is a mandatory protocol id */ VIRTCHNL2_PROTO_HDR_IPV6_FRAG = 22, VIRTCHNL2_PROTO_HDR_IPV6_EH = 23, /* VIRTCHNL2_PROTO_HDR_UDP is a mandatory protocol id */ VIRTCHNL2_PROTO_HDR_UDP = 24, /* VIRTCHNL2_PROTO_HDR_TCP is a mandatory protocol id */ VIRTCHNL2_PROTO_HDR_TCP = 25, /* VIRTCHNL2_PROTO_HDR_SCTP is a mandatory protocol id */ VIRTCHNL2_PROTO_HDR_SCTP = 26, /* VIRTCHNL2_PROTO_HDR_ICMP is a mandatory protocol id */ VIRTCHNL2_PROTO_HDR_ICMP = 27, /* VIRTCHNL2_PROTO_HDR_ICMPV6 is a mandatory protocol id */ VIRTCHNL2_PROTO_HDR_ICMPV6 = 28, VIRTCHNL2_PROTO_HDR_IGMP = 29, VIRTCHNL2_PROTO_HDR_AH = 30, VIRTCHNL2_PROTO_HDR_ESP = 31, VIRTCHNL2_PROTO_HDR_IKE = 32, VIRTCHNL2_PROTO_HDR_NATT_KEEP = 33, /* VIRTCHNL2_PROTO_HDR_PAY is a mandatory protocol id */ VIRTCHNL2_PROTO_HDR_PAY = 34, VIRTCHNL2_PROTO_HDR_L2TPV2 = 35, VIRTCHNL2_PROTO_HDR_L2TPV2_CONTROL = 36, VIRTCHNL2_PROTO_HDR_L2TPV3 = 37, VIRTCHNL2_PROTO_HDR_GTP = 38, VIRTCHNL2_PROTO_HDR_GTP_EH = 39, VIRTCHNL2_PROTO_HDR_GTPCV2 = 40, VIRTCHNL2_PROTO_HDR_GTPC_TEID = 41, VIRTCHNL2_PROTO_HDR_GTPU = 42, VIRTCHNL2_PROTO_HDR_GTPU_UL = 43, VIRTCHNL2_PROTO_HDR_GTPU_DL = 44, VIRTCHNL2_PROTO_HDR_ECPRI = 45, VIRTCHNL2_PROTO_HDR_VRRP = 46, VIRTCHNL2_PROTO_HDR_OSPF = 47, /* VIRTCHNL2_PROTO_HDR_TUN is a mandatory protocol id */ VIRTCHNL2_PROTO_HDR_TUN = 48, VIRTCHNL2_PROTO_HDR_GRE = 49, VIRTCHNL2_PROTO_HDR_NVGRE = 50, VIRTCHNL2_PROTO_HDR_VXLAN = 51, VIRTCHNL2_PROTO_HDR_VXLAN_GPE = 52, VIRTCHNL2_PROTO_HDR_GENEVE = 53, VIRTCHNL2_PROTO_HDR_NSH = 54, VIRTCHNL2_PROTO_HDR_QUIC = 55, VIRTCHNL2_PROTO_HDR_PFCP = 56, VIRTCHNL2_PROTO_HDR_PFCP_NODE = 57, VIRTCHNL2_PROTO_HDR_PFCP_SESSION = 58, VIRTCHNL2_PROTO_HDR_RTP = 59, VIRTCHNL2_PROTO_HDR_ROCE = 60, VIRTCHNL2_PROTO_HDR_ROCEV1 = 61, VIRTCHNL2_PROTO_HDR_ROCEV2 = 62, /* Protocol ids up to 32767 are reserved. * 32768 - 65534 are used for user defined protocol ids. * VIRTCHNL2_PROTO_HDR_NO_PROTO is a mandatory protocol id. */ VIRTCHNL2_PROTO_HDR_NO_PROTO = 65535, }; enum virtchl2_version { VIRTCHNL2_VERSION_MINOR_0 = 0, VIRTCHNL2_VERSION_MAJOR_2 = 2, }; /** * struct virtchnl2_edt_caps - Get EDT granularity and time horizon. * @tstamp_granularity_ns: Timestamp granularity in nanoseconds. * @time_horizon_ns: Total time window in nanoseconds. * * Associated with VIRTCHNL2_OP_GET_EDT_CAPS. */ struct virtchnl2_edt_caps { __le64 tstamp_granularity_ns; __le64 time_horizon_ns; }; VIRTCHNL2_CHECK_STRUCT_LEN(16, virtchnl2_edt_caps); /** * struct virtchnl2_version_info - Version information. * @major: Major version. * @minor: Minor version. * * PF/VF posts its version number to the CP. CP responds with its version number * in the same format, along with a return code. * If there is a major version mismatch, then the PF/VF cannot operate. * If there is a minor version mismatch, then the PF/VF can operate but should * add a warning to the system log. * * This version opcode MUST always be specified as == 1, regardless of other * changes in the API. The CP must always respond to this message without * error regardless of version mismatch. * * Associated with VIRTCHNL2_OP_VERSION. */ struct virtchnl2_version_info { __le32 major; __le32 minor; }; VIRTCHNL2_CHECK_STRUCT_LEN(8, virtchnl2_version_info); /** * struct virtchnl2_get_capabilities - Capabilities info. * @csum_caps: See enum virtchnl2_cap_txrx_csum. * @seg_caps: See enum virtchnl2_cap_seg. * @hsplit_caps: See enum virtchnl2_cap_rx_hsplit_at. * @rsc_caps: See enum virtchnl2_cap_rsc. * @rss_caps: See enum virtchnl2_cap_rss. * @other_caps: See enum virtchnl2_cap_other. * @mailbox_dyn_ctl: DYN_CTL register offset and vector id for mailbox * provided by CP. * @mailbox_vector_id: Mailbox vector id. * @num_allocated_vectors: Maximum number of allocated vectors for the device. * @max_rx_q: Maximum number of supported Rx queues. * @max_tx_q: Maximum number of supported Tx queues. * @max_rx_bufq: Maximum number of supported buffer queues. * @max_tx_complq: Maximum number of supported completion queues. * @max_sriov_vfs: The PF sends the maximum VFs it is requesting. The CP * responds with the maximum VFs granted. * @max_vports: Maximum number of vports that can be supported. * @default_num_vports: Default number of vports driver should allocate on load. * @max_tx_hdr_size: Max header length hardware can parse/checksum, in bytes. * @max_sg_bufs_per_tx_pkt: Max number of scatter gather buffers that can be * sent per transmit packet without needing to be * linearized. * @pad: Padding. * @reserved: Reserved. * @device_type: See enum virtchl2_device_type. * @min_sso_packet_len: Min packet length supported by device for single * segment offload. * @max_hdr_buf_per_lso: Max number of header buffers that can be used for * an LSO. * @pad1: Padding for future extensions. * * Dataplane driver sends this message to CP to negotiate capabilities and * provides a virtchnl2_get_capabilities structure with its desired * capabilities, max_sriov_vfs and num_allocated_vectors. * CP responds with a virtchnl2_get_capabilities structure updated * with allowed capabilities and the other fields as below. * If PF sets max_sriov_vfs as 0, CP will respond with max number of VFs * that can be created by this PF. For any other value 'n', CP responds * with max_sriov_vfs set to min(n, x) where x is the max number of VFs * allowed by CP's policy. max_sriov_vfs is not applicable for VFs. * If dataplane driver sets num_allocated_vectors as 0, CP will respond with 1 * which is default vector associated with the default mailbox. For any other * value 'n', CP responds with a value <= n based on the CP's policy of * max number of vectors for a PF. * CP will respond with the vector ID of mailbox allocated to the PF in * mailbox_vector_id and the number of itr index registers in itr_idx_map. * It also responds with default number of vports that the dataplane driver * should comeup with in default_num_vports and maximum number of vports that * can be supported in max_vports. * * Associated with VIRTCHNL2_OP_GET_CAPS. */ struct virtchnl2_get_capabilities { __le32 csum_caps; __le32 seg_caps; __le32 hsplit_caps; __le32 rsc_caps; __le64 rss_caps; __le64 other_caps; __le32 mailbox_dyn_ctl; __le16 mailbox_vector_id; __le16 num_allocated_vectors; __le16 max_rx_q; __le16 max_tx_q; __le16 max_rx_bufq; __le16 max_tx_complq; __le16 max_sriov_vfs; __le16 max_vports; __le16 default_num_vports; __le16 max_tx_hdr_size; u8 max_sg_bufs_per_tx_pkt; u8 pad[3]; u8 reserved[4]; __le32 device_type; u8 min_sso_packet_len; u8 max_hdr_buf_per_lso; u8 pad1[10]; }; VIRTCHNL2_CHECK_STRUCT_LEN(80, virtchnl2_get_capabilities); /** * struct virtchnl2_queue_reg_chunk - Single queue chunk. * @type: See enum virtchnl2_queue_type. * @start_queue_id: Start Queue ID. * @num_queues: Number of queues in the chunk. * @pad: Padding. * @qtail_reg_start: Queue tail register offset. * @qtail_reg_spacing: Queue tail register spacing. * @pad1: Padding for future extensions. */ struct virtchnl2_queue_reg_chunk { __le32 type; __le32 start_queue_id; __le32 num_queues; __le32 pad; __le64 qtail_reg_start; __le32 qtail_reg_spacing; u8 pad1[4]; }; VIRTCHNL2_CHECK_STRUCT_LEN(32, virtchnl2_queue_reg_chunk); /** * struct virtchnl2_queue_reg_chunks - Specify several chunks of contiguous * queues. * @num_chunks: Number of chunks. * @pad: Padding. * @chunks: Chunks of queue info. */ struct virtchnl2_queue_reg_chunks { __le16 num_chunks; u8 pad[6]; struct virtchnl2_queue_reg_chunk chunks[]; }; VIRTCHNL2_CHECK_STRUCT_LEN(8, virtchnl2_queue_reg_chunks); /** * struct virtchnl2_create_vport - Create vport config info. * @vport_type: See enum virtchnl2_vport_type. * @txq_model: See virtchnl2_queue_model. * @rxq_model: See virtchnl2_queue_model. * @num_tx_q: Number of Tx queues. * @num_tx_complq: Valid only if txq_model is split queue. * @num_rx_q: Number of Rx queues. * @num_rx_bufq: Valid only if rxq_model is split queue. * @default_rx_q: Relative receive queue index to be used as default. * @vport_index: Used to align PF and CP in case of default multiple vports, * it is filled by the PF and CP returns the same value, to * enable the driver to support multiple asynchronous parallel * CREATE_VPORT requests and associate a response to a specific * request. * @max_mtu: Max MTU. CP populates this field on response. * @vport_id: Vport id. CP populates this field on response. * @default_mac_addr: Default MAC address. * @pad: Padding. * @rx_desc_ids: See VIRTCHNL2_RX_DESC_IDS definitions. * @tx_desc_ids: See VIRTCHNL2_TX_DESC_IDS definitions. * @pad1: Padding. * @rss_algorithm: RSS algorithm. * @rss_key_size: RSS key size. * @rss_lut_size: RSS LUT size. * @rx_split_pos: See enum virtchnl2_cap_rx_hsplit_at. * @pad2: Padding. * @chunks: Chunks of contiguous queues. * * PF sends this message to CP to create a vport by filling in required * fields of virtchnl2_create_vport structure. * CP responds with the updated virtchnl2_create_vport structure containing the * necessary fields followed by chunks which in turn will have an array of * num_chunks entries of virtchnl2_queue_chunk structures. * * Associated with VIRTCHNL2_OP_CREATE_VPORT. */ struct virtchnl2_create_vport { __le16 vport_type; __le16 txq_model; __le16 rxq_model; __le16 num_tx_q; __le16 num_tx_complq; __le16 num_rx_q; __le16 num_rx_bufq; __le16 default_rx_q; __le16 vport_index; /* CP populates the following fields on response */ __le16 max_mtu; __le32 vport_id; u8 default_mac_addr[ETH_ALEN]; __le16 pad; __le64 rx_desc_ids; __le64 tx_desc_ids; u8 pad1[72]; __le32 rss_algorithm; __le16 rss_key_size; __le16 rss_lut_size; __le32 rx_split_pos; u8 pad2[20]; struct virtchnl2_queue_reg_chunks chunks; }; VIRTCHNL2_CHECK_STRUCT_LEN(160, virtchnl2_create_vport); /** * struct virtchnl2_vport - Vport ID info. * @vport_id: Vport id. * @pad: Padding for future extensions. * * PF sends this message to CP to destroy, enable or disable a vport by filling * in the vport_id in virtchnl2_vport structure. * CP responds with the status of the requested operation. * * Associated with VIRTCHNL2_OP_DESTROY_VPORT, VIRTCHNL2_OP_ENABLE_VPORT, * VIRTCHNL2_OP_DISABLE_VPORT. */ struct virtchnl2_vport { __le32 vport_id; u8 pad[4]; }; VIRTCHNL2_CHECK_STRUCT_LEN(8, virtchnl2_vport); /** * struct virtchnl2_txq_info - Transmit queue config info * @dma_ring_addr: DMA address. * @type: See enum virtchnl2_queue_type. * @queue_id: Queue ID. * @relative_queue_id: Valid only if queue model is split and type is transmit * queue. Used in many to one mapping of transmit queues to * completion queue. * @model: See enum virtchnl2_queue_model. * @sched_mode: See enum virtchnl2_txq_sched_mode. * @qflags: TX queue feature flags. * @ring_len: Ring length. * @tx_compl_queue_id: Valid only if queue model is split and type is transmit * queue. * @peer_type: Valid only if queue type is VIRTCHNL2_QUEUE_TYPE_MAILBOX_TX * @peer_rx_queue_id: Valid only if queue type is CONFIG_TX and used to deliver * messages for the respective CONFIG_TX queue. * @pad: Padding. * @egress_pasid: Egress PASID info. * @egress_hdr_pasid: Egress HDR passid. * @egress_buf_pasid: Egress buf passid. * @pad1: Padding for future extensions. */ struct virtchnl2_txq_info { __le64 dma_ring_addr; __le32 type; __le32 queue_id; __le16 relative_queue_id; __le16 model; __le16 sched_mode; __le16 qflags; __le16 ring_len; __le16 tx_compl_queue_id; __le16 peer_type; __le16 peer_rx_queue_id; u8 pad[4]; __le32 egress_pasid; __le32 egress_hdr_pasid; __le32 egress_buf_pasid; u8 pad1[8]; }; VIRTCHNL2_CHECK_STRUCT_LEN(56, virtchnl2_txq_info); /** * struct virtchnl2_config_tx_queues - TX queue config. * @vport_id: Vport id. * @num_qinfo: Number of virtchnl2_txq_info structs. * @pad: Padding. * @qinfo: Tx queues config info. * * PF sends this message to set up parameters for one or more transmit queues. * This message contains an array of num_qinfo instances of virtchnl2_txq_info * structures. CP configures requested queues and returns a status code. If * num_qinfo specified is greater than the number of queues associated with the * vport, an error is returned and no queues are configured. * * Associated with VIRTCHNL2_OP_CONFIG_TX_QUEUES. */ struct virtchnl2_config_tx_queues { __le32 vport_id; __le16 num_qinfo; u8 pad[10]; struct virtchnl2_txq_info qinfo[]; }; VIRTCHNL2_CHECK_STRUCT_LEN(16, virtchnl2_config_tx_queues); /** * struct virtchnl2_rxq_info - Receive queue config info. * @desc_ids: See VIRTCHNL2_RX_DESC_IDS definitions. * @dma_ring_addr: See VIRTCHNL2_RX_DESC_IDS definitions. * @type: See enum virtchnl2_queue_type. * @queue_id: Queue id. * @model: See enum virtchnl2_queue_model. * @hdr_buffer_size: Header buffer size. * @data_buffer_size: Data buffer size. * @max_pkt_size: Max packet size. * @ring_len: Ring length. * @buffer_notif_stride: Buffer notification stride in units of 32-descriptors. * This field must be a power of 2. * @pad: Padding. * @dma_head_wb_addr: Applicable only for receive buffer queues. * @qflags: Applicable only for receive completion queues. * See enum virtchnl2_rxq_flags. * @rx_buffer_low_watermark: Rx buffer low watermark. * @rx_bufq1_id: Buffer queue index of the first buffer queue associated with * the Rx queue. Valid only in split queue model. * @rx_bufq2_id: Buffer queue index of the second buffer queue associated with * the Rx queue. Valid only in split queue model. * @bufq2_ena: It indicates if there is a second buffer, rx_bufq2_id is valid * only if this field is set. * @pad1: Padding. * @ingress_pasid: Ingress PASID. * @ingress_hdr_pasid: Ingress PASID header. * @ingress_buf_pasid: Ingress PASID buffer. * @pad2: Padding for future extensions. */ struct virtchnl2_rxq_info { __le64 desc_ids; __le64 dma_ring_addr; __le32 type; __le32 queue_id; __le16 model; __le16 hdr_buffer_size; __le32 data_buffer_size; __le32 max_pkt_size; __le16 ring_len; u8 buffer_notif_stride; u8 pad; __le64 dma_head_wb_addr; __le16 qflags; __le16 rx_buffer_low_watermark; __le16 rx_bufq1_id; __le16 rx_bufq2_id; u8 bufq2_ena; u8 pad1[3]; __le32 ingress_pasid; __le32 ingress_hdr_pasid; __le32 ingress_buf_pasid; u8 pad2[16]; }; VIRTCHNL2_CHECK_STRUCT_LEN(88, virtchnl2_rxq_info); /** * struct virtchnl2_config_rx_queues - Rx queues config. * @vport_id: Vport id. * @num_qinfo: Number of instances. * @pad: Padding. * @qinfo: Rx queues config info. * * PF sends this message to set up parameters for one or more receive queues. * This message contains an array of num_qinfo instances of virtchnl2_rxq_info * structures. CP configures requested queues and returns a status code. * If the number of queues specified is greater than the number of queues * associated with the vport, an error is returned and no queues are configured. * * Associated with VIRTCHNL2_OP_CONFIG_RX_QUEUES. */ struct virtchnl2_config_rx_queues { __le32 vport_id; __le16 num_qinfo; u8 pad[18]; struct virtchnl2_rxq_info qinfo[]; }; VIRTCHNL2_CHECK_STRUCT_LEN(24, virtchnl2_config_rx_queues); /** * struct virtchnl2_add_queues - data for VIRTCHNL2_OP_ADD_QUEUES. * @vport_id: Vport id. * @num_tx_q: Number of Tx qieues. * @num_tx_complq: Number of Tx completion queues. * @num_rx_q: Number of Rx queues. * @num_rx_bufq: Number of Rx buffer queues. * @pad: Padding. * @chunks: Chunks of contiguous queues. * * PF sends this message to request additional transmit/receive queues beyond * the ones that were assigned via CREATE_VPORT request. virtchnl2_add_queues * structure is used to specify the number of each type of queues. * CP responds with the same structure with the actual number of queues assigned * followed by num_chunks of virtchnl2_queue_chunk structures. * * Associated with VIRTCHNL2_OP_ADD_QUEUES. */ struct virtchnl2_add_queues { __le32 vport_id; __le16 num_tx_q; __le16 num_tx_complq; __le16 num_rx_q; __le16 num_rx_bufq; u8 pad[4]; struct virtchnl2_queue_reg_chunks chunks; }; VIRTCHNL2_CHECK_STRUCT_LEN(24, virtchnl2_add_queues); /** * struct virtchnl2_vector_chunk - Structure to specify a chunk of contiguous * interrupt vectors. * @start_vector_id: Start vector id. * @start_evv_id: Start EVV id. * @num_vectors: Number of vectors. * @pad: Padding. * @dynctl_reg_start: DYN_CTL register offset. * @dynctl_reg_spacing: register spacing between DYN_CTL registers of 2 * consecutive vectors. * @itrn_reg_start: ITRN register offset. * @itrn_reg_spacing: Register spacing between dynctl registers of 2 * consecutive vectors. * @itrn_index_spacing: Register spacing between itrn registers of the same * vector where n=0..2. * @pad1: Padding for future extensions. * * Register offsets and spacing provided by CP. * Dynamic control registers are used for enabling/disabling/re-enabling * interrupts and updating interrupt rates in the hotpath. Any changes * to interrupt rates in the dynamic control registers will be reflected * in the interrupt throttling rate registers. * itrn registers are used to update interrupt rates for specific * interrupt indices without modifying the state of the interrupt. */ struct virtchnl2_vector_chunk { __le16 start_vector_id; __le16 start_evv_id; __le16 num_vectors; __le16 pad; __le32 dynctl_reg_start; __le32 dynctl_reg_spacing; __le32 itrn_reg_start; __le32 itrn_reg_spacing; __le32 itrn_index_spacing; u8 pad1[4]; }; VIRTCHNL2_CHECK_STRUCT_LEN(32, virtchnl2_vector_chunk); /** * struct virtchnl2_vector_chunks - chunks of contiguous interrupt vectors. * @num_vchunks: number of vector chunks. * @pad: Padding. * @vchunks: Chunks of contiguous vector info. * * PF sends virtchnl2_vector_chunks struct to specify the vectors it is giving * away. CP performs requested action and returns status. * * Associated with VIRTCHNL2_OP_DEALLOC_VECTORS. */ struct virtchnl2_vector_chunks { __le16 num_vchunks; u8 pad[14]; struct virtchnl2_vector_chunk vchunks[]; }; VIRTCHNL2_CHECK_STRUCT_LEN(16, virtchnl2_vector_chunks); /** * struct virtchnl2_alloc_vectors - vector allocation info. * @num_vectors: Number of vectors. * @pad: Padding. * @vchunks: Chunks of contiguous vector info. * * PF sends this message to request additional interrupt vectors beyond the * ones that were assigned via GET_CAPS request. virtchnl2_alloc_vectors * structure is used to specify the number of vectors requested. CP responds * with the same structure with the actual number of vectors assigned followed * by virtchnl2_vector_chunks structure identifying the vector ids. * * Associated with VIRTCHNL2_OP_ALLOC_VECTORS. */ struct virtchnl2_alloc_vectors { __le16 num_vectors; u8 pad[14]; struct virtchnl2_vector_chunks vchunks; }; VIRTCHNL2_CHECK_STRUCT_LEN(32, virtchnl2_alloc_vectors); /** * struct virtchnl2_rss_lut - RSS LUT info. * @vport_id: Vport id. * @lut_entries_start: Start of LUT entries. * @lut_entries: Number of LUT entrties. * @pad: Padding. * @lut: RSS lookup table. * * PF sends this message to get or set RSS lookup table. Only supported if * both PF and CP drivers set the VIRTCHNL2_CAP_RSS bit during configuration * negotiation. * * Associated with VIRTCHNL2_OP_GET_RSS_LUT and VIRTCHNL2_OP_SET_RSS_LUT. */ struct virtchnl2_rss_lut { __le32 vport_id; __le16 lut_entries_start; __le16 lut_entries; u8 pad[4]; __le32 lut[]; }; VIRTCHNL2_CHECK_STRUCT_LEN(12, virtchnl2_rss_lut); /** * struct virtchnl2_rss_hash - RSS hash info. * @ptype_groups: Packet type groups bitmap. * @vport_id: Vport id. * @pad: Padding for future extensions. * * PF sends these messages to get and set the hash filter enable bits for RSS. * By default, the CP sets these to all possible traffic types that the * hardware supports. The PF can query this value if it wants to change the * traffic types that are hashed by the hardware. * Only supported if both PF and CP drivers set the VIRTCHNL2_CAP_RSS bit * during configuration negotiation. * * Associated with VIRTCHNL2_OP_GET_RSS_HASH and VIRTCHNL2_OP_SET_RSS_HASH */ struct virtchnl2_rss_hash { __le64 ptype_groups; __le32 vport_id; u8 pad[4]; }; VIRTCHNL2_CHECK_STRUCT_LEN(16, virtchnl2_rss_hash); /** * struct virtchnl2_sriov_vfs_info - VFs info. * @num_vfs: Number of VFs. * @pad: Padding for future extensions. * * This message is used to set number of SRIOV VFs to be created. The actual * allocation of resources for the VFs in terms of vport, queues and interrupts * is done by CP. When this call completes, the IDPF driver calls * pci_enable_sriov to let the OS instantiate the SRIOV PCIE devices. * The number of VFs set to 0 will destroy all the VFs of this function. * * Associated with VIRTCHNL2_OP_SET_SRIOV_VFS. */ struct virtchnl2_sriov_vfs_info { __le16 num_vfs; __le16 pad; }; VIRTCHNL2_CHECK_STRUCT_LEN(4, virtchnl2_sriov_vfs_info); /** * struct virtchnl2_ptype - Packet type info. * @ptype_id_10: 10-bit packet type. * @ptype_id_8: 8-bit packet type. * @proto_id_count: Number of protocol ids the packet supports, maximum of 32 * protocol ids are supported. * @pad: Padding. * @proto_id: proto_id_count decides the allocation of protocol id array. * See enum virtchnl2_proto_hdr_type. * * Based on the descriptor type the PF supports, CP fills ptype_id_10 or * ptype_id_8 for flex and base descriptor respectively. If ptype_id_10 value * is set to 0xFFFF, PF should consider this ptype as dummy one and it is the * last ptype. */ struct virtchnl2_ptype { __le16 ptype_id_10; u8 ptype_id_8; u8 proto_id_count; __le16 pad; __le16 proto_id[]; }; VIRTCHNL2_CHECK_STRUCT_LEN(6, virtchnl2_ptype); /** * struct virtchnl2_get_ptype_info - Packet type info. * @start_ptype_id: Starting ptype ID. * @num_ptypes: Number of packet types from start_ptype_id. * @pad: Padding for future extensions. * * The total number of supported packet types is based on the descriptor type. * For the flex descriptor, it is 1024 (10-bit ptype), and for the base * descriptor, it is 256 (8-bit ptype). Send this message to the CP by * populating the 'start_ptype_id' and the 'num_ptypes'. CP responds with the * 'start_ptype_id', 'num_ptypes', and the array of ptype (virtchnl2_ptype) that * are added at the end of the 'virtchnl2_get_ptype_info' message (Note: There * is no specific field for the ptypes but are added at the end of the * ptype info message. PF/VF is expected to extract the ptypes accordingly. * Reason for doing this is because compiler doesn't allow nested flexible * array fields). * * If all the ptypes don't fit into one mailbox buffer, CP splits the * ptype info into multiple messages, where each message will have its own * 'start_ptype_id', 'num_ptypes', and the ptype array itself. When CP is done * updating all the ptype information extracted from the package (the number of * ptypes extracted might be less than what PF/VF expects), it will append a * dummy ptype (which has 'ptype_id_10' of 'struct virtchnl2_ptype' as 0xFFFF) * to the ptype array. * * PF/VF is expected to receive multiple VIRTCHNL2_OP_GET_PTYPE_INFO messages. * * Associated with VIRTCHNL2_OP_GET_PTYPE_INFO. */ struct virtchnl2_get_ptype_info { __le16 start_ptype_id; __le16 num_ptypes; __le32 pad; }; VIRTCHNL2_CHECK_STRUCT_LEN(8, virtchnl2_get_ptype_info); /** * struct virtchnl2_vport_stats - Vport statistics. * @vport_id: Vport id. * @pad: Padding. * @rx_bytes: Received bytes. * @rx_unicast: Received unicast packets. * @rx_multicast: Received multicast packets. * @rx_broadcast: Received broadcast packets. * @rx_discards: Discarded packets on receive. * @rx_errors: Receive errors. * @rx_unknown_protocol: Unlnown protocol. * @tx_bytes: Transmitted bytes. * @tx_unicast: Transmitted unicast packets. * @tx_multicast: Transmitted multicast packets. * @tx_broadcast: Transmitted broadcast packets. * @tx_discards: Discarded packets on transmit. * @tx_errors: Transmit errors. * @rx_invalid_frame_length: Packets with invalid frame length. * @rx_overflow_drop: Packets dropped on buffer overflow. * * PF/VF sends this message to CP to get the update stats by specifying the * vport_id. CP responds with stats in struct virtchnl2_vport_stats. * * Associated with VIRTCHNL2_OP_GET_STATS. */ struct virtchnl2_vport_stats { __le32 vport_id; u8 pad[4]; __le64 rx_bytes; __le64 rx_unicast; __le64 rx_multicast; __le64 rx_broadcast; __le64 rx_discards; __le64 rx_errors; __le64 rx_unknown_protocol; __le64 tx_bytes; __le64 tx_unicast; __le64 tx_multicast; __le64 tx_broadcast; __le64 tx_discards; __le64 tx_errors; __le64 rx_invalid_frame_length; __le64 rx_overflow_drop; }; VIRTCHNL2_CHECK_STRUCT_LEN(128, virtchnl2_vport_stats); /** * struct virtchnl2_event - Event info. * @event: Event opcode. See enum virtchnl2_event_codes. * @link_speed: Link_speed provided in Mbps. * @vport_id: Vport ID. * @link_status: Link status. * @pad: Padding. * @reserved: Reserved. * * CP sends this message to inform the PF/VF driver of events that may affect * it. No direct response is expected from the driver, though it may generate * other messages in response to this one. * * Associated with VIRTCHNL2_OP_EVENT. */ struct virtchnl2_event { __le32 event; __le32 link_speed; __le32 vport_id; u8 link_status; u8 pad; __le16 reserved; }; VIRTCHNL2_CHECK_STRUCT_LEN(16, virtchnl2_event); /** * struct virtchnl2_rss_key - RSS key info. * @vport_id: Vport id. * @key_len: Length of RSS key. * @pad: Padding. * @key_flex: RSS hash key, packed bytes. * PF/VF sends this message to get or set RSS key. Only supported if both * PF/VF and CP drivers set the VIRTCHNL2_CAP_RSS bit during configuration * negotiation. * * Associated with VIRTCHNL2_OP_GET_RSS_KEY and VIRTCHNL2_OP_SET_RSS_KEY. */ struct virtchnl2_rss_key { __le32 vport_id; __le16 key_len; u8 pad; u8 key_flex[]; } __packed; VIRTCHNL2_CHECK_STRUCT_LEN(7, virtchnl2_rss_key); /** * struct virtchnl2_queue_chunk - chunk of contiguous queues * @type: See enum virtchnl2_queue_type. * @start_queue_id: Starting queue id. * @num_queues: Number of queues. * @pad: Padding for future extensions. */ struct virtchnl2_queue_chunk { __le32 type; __le32 start_queue_id; __le32 num_queues; u8 pad[4]; }; VIRTCHNL2_CHECK_STRUCT_LEN(16, virtchnl2_queue_chunk); /* struct virtchnl2_queue_chunks - chunks of contiguous queues * @num_chunks: Number of chunks. * @pad: Padding. * @chunks: Chunks of contiguous queues info. */ struct virtchnl2_queue_chunks { __le16 num_chunks; u8 pad[6]; struct virtchnl2_queue_chunk chunks[]; }; VIRTCHNL2_CHECK_STRUCT_LEN(8, virtchnl2_queue_chunks); /** * struct virtchnl2_del_ena_dis_queues - Enable/disable queues info. * @vport_id: Vport id. * @pad: Padding. * @chunks: Chunks of contiguous queues info. * * PF sends these messages to enable, disable or delete queues specified in * chunks. PF sends virtchnl2_del_ena_dis_queues struct to specify the queues * to be enabled/disabled/deleted. Also applicable to single queue receive or * transmit. CP performs requested action and returns status. * * Associated with VIRTCHNL2_OP_ENABLE_QUEUES, VIRTCHNL2_OP_DISABLE_QUEUES and * VIRTCHNL2_OP_DISABLE_QUEUES. */ struct virtchnl2_del_ena_dis_queues { __le32 vport_id; u8 pad[4]; struct virtchnl2_queue_chunks chunks; }; VIRTCHNL2_CHECK_STRUCT_LEN(16, virtchnl2_del_ena_dis_queues); /** * struct virtchnl2_queue_vector - Queue to vector mapping. * @queue_id: Queue id. * @vector_id: Vector id. * @pad: Padding. * @itr_idx: See enum virtchnl2_itr_idx. * @queue_type: See enum virtchnl2_queue_type. * @pad1: Padding for future extensions. */ struct virtchnl2_queue_vector { __le32 queue_id; __le16 vector_id; u8 pad[2]; __le32 itr_idx; __le32 queue_type; u8 pad1[8]; }; VIRTCHNL2_CHECK_STRUCT_LEN(24, virtchnl2_queue_vector); /** * struct virtchnl2_queue_vector_maps - Map/unmap queues info. * @vport_id: Vport id. * @num_qv_maps: Number of queue vector maps. * @pad: Padding. * @qv_maps: Queue to vector maps. * * PF sends this message to map or unmap queues to vectors and interrupt * throttling rate index registers. External data buffer contains * virtchnl2_queue_vector_maps structure that contains num_qv_maps of * virtchnl2_queue_vector structures. CP maps the requested queue vector maps * after validating the queue and vector ids and returns a status code. * * Associated with VIRTCHNL2_OP_MAP_QUEUE_VECTOR and * VIRTCHNL2_OP_UNMAP_QUEUE_VECTOR. */ struct virtchnl2_queue_vector_maps { __le32 vport_id; __le16 num_qv_maps; u8 pad[10]; struct virtchnl2_queue_vector qv_maps[]; }; VIRTCHNL2_CHECK_STRUCT_LEN(16, virtchnl2_queue_vector_maps); /** * struct virtchnl2_loopback - Loopback info. * @vport_id: Vport id. * @enable: Enable/disable. * @pad: Padding for future extensions. * * PF/VF sends this message to transition to/from the loopback state. Setting * the 'enable' to 1 enables the loopback state and setting 'enable' to 0 * disables it. CP configures the state to loopback and returns status. * * Associated with VIRTCHNL2_OP_LOOPBACK. */ struct virtchnl2_loopback { __le32 vport_id; u8 enable; u8 pad[3]; }; VIRTCHNL2_CHECK_STRUCT_LEN(8, virtchnl2_loopback); /* struct virtchnl2_mac_addr - MAC address info. * @addr: MAC address. * @type: MAC type. See enum virtchnl2_mac_addr_type. * @pad: Padding for future extensions. */ struct virtchnl2_mac_addr { u8 addr[ETH_ALEN]; u8 type; u8 pad; }; VIRTCHNL2_CHECK_STRUCT_LEN(8, virtchnl2_mac_addr); /** * struct virtchnl2_mac_addr_list - List of MAC addresses. * @vport_id: Vport id. * @num_mac_addr: Number of MAC addresses. * @pad: Padding. * @mac_addr_list: List with MAC address info. * * PF/VF driver uses this structure to send list of MAC addresses to be * added/deleted to the CP where as CP performs the action and returns the * status. * * Associated with VIRTCHNL2_OP_ADD_MAC_ADDR and VIRTCHNL2_OP_DEL_MAC_ADDR. */ struct virtchnl2_mac_addr_list { __le32 vport_id; __le16 num_mac_addr; u8 pad[2]; struct virtchnl2_mac_addr mac_addr_list[]; }; VIRTCHNL2_CHECK_STRUCT_LEN(8, virtchnl2_mac_addr_list); /** * struct virtchnl2_promisc_info - Promisc type info. * @vport_id: Vport id. * @flags: See enum virtchnl2_promisc_flags. * @pad: Padding for future extensions. * * PF/VF sends vport id and flags to the CP where as CP performs the action * and returns the status. * * Associated with VIRTCHNL2_OP_CONFIG_PROMISCUOUS_MODE. */ struct virtchnl2_promisc_info { __le32 vport_id; /* See VIRTCHNL2_PROMISC_FLAGS definitions */ __le16 flags; u8 pad[2]; }; VIRTCHNL2_CHECK_STRUCT_LEN(8, virtchnl2_promisc_info); #endif /* _VIRTCHNL_2_H_ */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1