Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Yuval Mintz | 523 | 51.58% | 17 | 48.57% |
Manish Chopra | 389 | 38.36% | 6 | 17.14% |
Rahul Verma | 36 | 3.55% | 2 | 5.71% |
Sudarsana Reddy Kalluru | 31 | 3.06% | 4 | 11.43% |
Tomer Tayar | 12 | 1.18% | 1 | 2.86% |
Konstantin Khorenko | 9 | 0.89% | 1 | 2.86% |
Prabhakar Kushwaha | 8 | 0.79% | 1 | 2.86% |
Michal Kalderon | 4 | 0.39% | 1 | 2.86% |
Alexander Lobakin | 2 | 0.20% | 2 | 5.71% |
Total | 1014 | 35 |
/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) */ /* QLogic qed NIC Driver * Copyright (c) 2015-2017 QLogic Corporation * Copyright (c) 2019-2020 Marvell International Ltd. */ #ifndef _QED_L2_H #define _QED_L2_H #include <linux/types.h> #include <linux/io.h> #include <linux/kernel.h> #include <linux/slab.h> #include <linux/qed/qed_eth_if.h> #include "qed.h" #include "qed_hw.h" #include "qed_sp.h" struct qed_rss_params { u8 update_rss_config; u8 rss_enable; u8 rss_eng_id; u8 update_rss_capabilities; u8 update_rss_ind_table; u8 update_rss_key; u8 rss_caps; u8 rss_table_size_log; /* Indirection table consist of rx queue handles */ void *rss_ind_table[QED_RSS_IND_TABLE_SIZE]; u32 rss_key[QED_RSS_KEY_SIZE]; }; struct qed_sge_tpa_params { u8 max_buffers_per_cqe; u8 update_tpa_en_flg; u8 tpa_ipv4_en_flg; u8 tpa_ipv6_en_flg; u8 tpa_ipv4_tunn_en_flg; u8 tpa_ipv6_tunn_en_flg; u8 update_tpa_param_flg; u8 tpa_pkt_split_flg; u8 tpa_hdr_data_split_flg; u8 tpa_gro_consistent_flg; u8 tpa_max_aggs_num; u16 tpa_max_size; u16 tpa_min_size_to_start; u16 tpa_min_size_to_cont; }; enum qed_filter_opcode { QED_FILTER_ADD, QED_FILTER_REMOVE, QED_FILTER_MOVE, QED_FILTER_REPLACE, /* Delete all MACs and add new one instead */ QED_FILTER_FLUSH, /* Removes all filters */ }; enum qed_filter_ucast_type { QED_FILTER_MAC, QED_FILTER_VLAN, QED_FILTER_MAC_VLAN, QED_FILTER_INNER_MAC, QED_FILTER_INNER_VLAN, QED_FILTER_INNER_PAIR, QED_FILTER_INNER_MAC_VNI_PAIR, QED_FILTER_MAC_VNI_PAIR, QED_FILTER_VNI, }; struct qed_filter_ucast { enum qed_filter_opcode opcode; enum qed_filter_ucast_type type; u8 is_rx_filter; u8 is_tx_filter; u8 vport_to_add_to; u8 vport_to_remove_from; unsigned char mac[ETH_ALEN]; u8 assert_on_error; u16 vlan; u32 vni; }; struct qed_filter_mcast { /* MOVE is not supported for multicast */ enum qed_filter_opcode opcode; u8 vport_to_add_to; u8 vport_to_remove_from; u8 num_mc_addrs; #define QED_MAX_MC_ADDRS 64 unsigned char mac[QED_MAX_MC_ADDRS][ETH_ALEN]; }; /** * qed_eth_rx_queue_stop(): This ramrod closes an Rx queue. * * @p_hwfn: HW device data. * @p_rxq: Handler of queue to close * @eq_completion_only: If True completion will be on * EQe, if False completion will be * on EQe if p_hwfn opaque * different from the RXQ opaque * otherwise on CQe. * @cqe_completion: If True completion will be receive on CQe. * * Return: Int. */ int qed_eth_rx_queue_stop(struct qed_hwfn *p_hwfn, void *p_rxq, bool eq_completion_only, bool cqe_completion); /** * qed_eth_tx_queue_stop(): Closes a Tx queue. * * @p_hwfn: HW device data. * @p_txq: handle to Tx queue needed to be closed. * * Return: Int. */ int qed_eth_tx_queue_stop(struct qed_hwfn *p_hwfn, void *p_txq); enum qed_tpa_mode { QED_TPA_MODE_NONE, QED_TPA_MODE_UNUSED, QED_TPA_MODE_GRO, QED_TPA_MODE_MAX }; struct qed_sp_vport_start_params { enum qed_tpa_mode tpa_mode; bool remove_inner_vlan; bool tx_switching; bool handle_ptp_pkts; bool only_untagged; bool drop_ttl0; u8 max_buffers_per_cqe; u32 concrete_fid; u16 opaque_fid; u8 vport_id; u16 mtu; bool check_mac; bool check_ethtype; }; int qed_sp_eth_vport_start(struct qed_hwfn *p_hwfn, struct qed_sp_vport_start_params *p_params); struct qed_filter_accept_flags { u8 update_rx_mode_config; u8 update_tx_mode_config; u8 rx_accept_filter; u8 tx_accept_filter; #define QED_ACCEPT_NONE 0x01 #define QED_ACCEPT_UCAST_MATCHED 0x02 #define QED_ACCEPT_UCAST_UNMATCHED 0x04 #define QED_ACCEPT_MCAST_MATCHED 0x08 #define QED_ACCEPT_MCAST_UNMATCHED 0x10 #define QED_ACCEPT_BCAST 0x20 #define QED_ACCEPT_ANY_VNI 0x40 }; struct qed_arfs_config_params { bool tcp; bool udp; bool ipv4; bool ipv6; enum qed_filter_config_mode mode; }; struct qed_sp_vport_update_params { u16 opaque_fid; u8 vport_id; u8 update_vport_active_rx_flg; u8 vport_active_rx_flg; u8 update_vport_active_tx_flg; u8 vport_active_tx_flg; u8 update_inner_vlan_removal_flg; u8 inner_vlan_removal_flg; u8 silent_vlan_removal_flg; u8 update_default_vlan_enable_flg; u8 default_vlan_enable_flg; u8 update_default_vlan_flg; u16 default_vlan; u8 update_tx_switching_flg; u8 tx_switching_flg; u8 update_approx_mcast_flg; u8 update_anti_spoofing_en_flg; u8 anti_spoofing_en; u8 update_accept_any_vlan_flg; u8 accept_any_vlan; u32 bins[8]; struct qed_rss_params *rss_params; struct qed_filter_accept_flags accept_flags; struct qed_sge_tpa_params *sge_tpa_params; u8 update_ctl_frame_check; u8 mac_chk_en; u8 ethtype_chk_en; }; int qed_sp_vport_update(struct qed_hwfn *p_hwfn, struct qed_sp_vport_update_params *p_params, enum spq_mode comp_mode, struct qed_spq_comp_cb *p_comp_data); /** * qed_sp_vport_stop: This ramrod closes a VPort after all its * RX and TX queues are terminated. * An Assert is generated if any queues are left open. * * @p_hwfn: HW device data. * @opaque_fid: Opaque FID * @vport_id: VPort ID. * * Return: Int. */ int qed_sp_vport_stop(struct qed_hwfn *p_hwfn, u16 opaque_fid, u8 vport_id); int qed_sp_eth_filter_ucast(struct qed_hwfn *p_hwfn, u16 opaque_fid, struct qed_filter_ucast *p_filter_cmd, enum spq_mode comp_mode, struct qed_spq_comp_cb *p_comp_data); /** * qed_sp_eth_rx_queues_update(): This ramrod updates an RX queue. * It is used for setting the active state * of the queue and updating the TPA and * SGE parameters. * @p_hwfn: HW device data. * @pp_rxq_handlers: An array of queue handlers to be updated. * @num_rxqs: number of queues to update. * @complete_cqe_flg: Post completion to the CQE Ring if set. * @complete_event_flg: Post completion to the Event Ring if set. * @comp_mode: Comp mode. * @p_comp_data: Pointer Comp data. * * Return: Int. * * Note At the moment - only used by non-linux VFs. */ int qed_sp_eth_rx_queues_update(struct qed_hwfn *p_hwfn, void **pp_rxq_handlers, u8 num_rxqs, u8 complete_cqe_flg, u8 complete_event_flg, enum spq_mode comp_mode, struct qed_spq_comp_cb *p_comp_data); /** * qed_get_vport_stats(): Fills provided statistics * struct with statistics. * * @cdev: Qed dev pointer. * @stats: Points to struct that will be filled with statistics. * * Return: Void. */ void qed_get_vport_stats(struct qed_dev *cdev, struct qed_eth_stats *stats); /** * qed_get_vport_stats_context(): Fills provided statistics * struct with statistics. * * @cdev: Qed dev pointer. * @stats: Points to struct that will be filled with statistics. * @is_atomic: Hint from the caller - if the func can sleep or not. * * Context: The function should not sleep in case is_atomic == true. * Return: Void. */ void qed_get_vport_stats_context(struct qed_dev *cdev, struct qed_eth_stats *stats, bool is_atomic); void qed_reset_vport_stats(struct qed_dev *cdev); /** * qed_arfs_mode_configure(): Enable or disable rfs mode. * It must accept at least one of tcp or udp true * and at least one of ipv4 or ipv6 true to enable * rfs mode. * * @p_hwfn: HW device data. * @p_ptt: P_ptt. * @p_cfg_params: arfs mode configuration parameters. * * Return. Void. */ void qed_arfs_mode_configure(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt, struct qed_arfs_config_params *p_cfg_params); /** * qed_configure_rfs_ntuple_filter(): This ramrod should be used to add * or remove arfs hw filter * * @p_hwfn: HW device data. * @p_cb: Used for QED_SPQ_MODE_CB,where client would initialize * it with cookie and callback function address, if not * using this mode then client must pass NULL. * @p_params: Pointer to params. * * Return: Void. */ int qed_configure_rfs_ntuple_filter(struct qed_hwfn *p_hwfn, struct qed_spq_comp_cb *p_cb, struct qed_ntuple_filter_params *p_params); #define MAX_QUEUES_PER_QZONE (sizeof(unsigned long) * 8) #define QED_QUEUE_CID_SELF (0xff) /* Almost identical to the qed_queue_start_common_params, * but here we maintain the SB index in IGU CAM. */ struct qed_queue_cid_params { u8 vport_id; u16 queue_id; u8 stats_id; }; /* Additional parameters required for initialization of the queue_cid * and are relevant only for a PF initializing one for its VFs. */ struct qed_queue_cid_vf_params { /* Should match the VF's relative index */ u8 vfid; /* 0-based queue index. Should reflect the relative qzone the * VF thinks is associated with it [in its range]. */ u8 vf_qid; /* Indicates a VF is legacy, making it differ in several things: * - Producers would be placed in a different place. * - Makes assumptions regarding the CIDs. */ u8 vf_legacy; u8 qid_usage_idx; }; struct qed_queue_cid { /* For stats-id, the `rel' is actually absolute as well */ struct qed_queue_cid_params rel; struct qed_queue_cid_params abs; /* These have no 'relative' meaning */ u16 sb_igu_id; u8 sb_idx; u32 cid; u16 opaque_fid; bool b_is_rx; /* VFs queues are mapped differently, so we need to know the * relative queue associated with them [0-based]. * Notice this is relevant on the *PF* queue-cid of its VF's queues, * and not on the VF itself. */ u8 vfid; u8 vf_qid; /* We need an additional index to differentiate between queues opened * for same queue-zone, as VFs would have to communicate the info * to the PF [otherwise PF has no way to differentiate]. */ u8 qid_usage_idx; u8 vf_legacy; #define QED_QCID_LEGACY_VF_RX_PROD (BIT(0)) #define QED_QCID_LEGACY_VF_CID (BIT(1)) struct qed_hwfn *p_owner; }; int qed_l2_alloc(struct qed_hwfn *p_hwfn); void qed_l2_setup(struct qed_hwfn *p_hwfn); void qed_l2_free(struct qed_hwfn *p_hwfn); void qed_eth_queue_cid_release(struct qed_hwfn *p_hwfn, struct qed_queue_cid *p_cid); struct qed_queue_cid * qed_eth_queue_to_cid(struct qed_hwfn *p_hwfn, u16 opaque_fid, struct qed_queue_start_common_params *p_params, bool b_is_rx, struct qed_queue_cid_vf_params *p_vf_params); int qed_sp_eth_vport_start(struct qed_hwfn *p_hwfn, struct qed_sp_vport_start_params *p_params); /** * qed_eth_rxq_start_ramrod(): Starts an Rx queue, when queue_cid is * already prepared * * @p_hwfn: HW device data. * @p_cid: Pointer CID. * @bd_max_bytes: Max bytes. * @bd_chain_phys_addr: Chain physcial address. * @cqe_pbl_addr: PBL address. * @cqe_pbl_size: PBL size. * * Return: Int. */ int qed_eth_rxq_start_ramrod(struct qed_hwfn *p_hwfn, struct qed_queue_cid *p_cid, u16 bd_max_bytes, dma_addr_t bd_chain_phys_addr, dma_addr_t cqe_pbl_addr, u16 cqe_pbl_size); /** * qed_eth_txq_start_ramrod(): Starts a Tx queue, where queue_cid is * already prepared * * @p_hwfn: HW device data. * @p_cid: Pointer CID. * @pbl_addr: PBL address. * @pbl_size: PBL size. * @pq_id: Parameters for choosing the PQ for this Tx queue. * * Return: Int. */ int qed_eth_txq_start_ramrod(struct qed_hwfn *p_hwfn, struct qed_queue_cid *p_cid, dma_addr_t pbl_addr, u16 pbl_size, u16 pq_id); u8 qed_mcast_bin_from_mac(u8 *mac); int qed_set_rxq_coalesce(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt, u16 coalesce, struct qed_queue_cid *p_cid); int qed_set_txq_coalesce(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt, u16 coalesce, struct qed_queue_cid *p_cid); int qed_get_rxq_coalesce(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt, struct qed_queue_cid *p_cid, u16 *p_hw_coal); int qed_get_txq_coalesce(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt, struct qed_queue_cid *p_cid, u16 *p_hw_coal); #endif
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1