Contributors: 9
Author |
Tokens |
Token Proportion |
Commits |
Commit Proportion |
Grant C. Likely |
421 |
77.96% |
1 |
9.09% |
Esben Haabendal |
103 |
19.07% |
3 |
27.27% |
Tobias Klauser |
6 |
1.11% |
1 |
9.09% |
Linus Torvalds (pre-git) |
2 |
0.37% |
1 |
9.09% |
Michal Simek |
2 |
0.37% |
1 |
9.09% |
Rob Herring |
2 |
0.37% |
1 |
9.09% |
huangjunxian |
2 |
0.37% |
1 |
9.09% |
Linus Torvalds |
1 |
0.19% |
1 |
9.09% |
Greg Kroah-Hartman |
1 |
0.19% |
1 |
9.09% |
Total |
540 |
|
11 |
|
// SPDX-License-Identifier: GPL-2.0
/*
* MDIO bus driver for the Xilinx TEMAC device
*
* Copyright (c) 2009 Secret Lab Technologies, Ltd.
*/
#include <linux/io.h>
#include <linux/netdevice.h>
#include <linux/mutex.h>
#include <linux/phy.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/of_mdio.h>
#include <linux/platform_data/xilinx-ll-temac.h>
#include "ll_temac.h"
/* ---------------------------------------------------------------------
* MDIO Bus functions
*/
static int temac_mdio_read(struct mii_bus *bus, int phy_id, int reg)
{
struct temac_local *lp = bus->priv;
u32 rc;
unsigned long flags;
/* Write the PHY address to the MIIM Access Initiator register.
* When the transfer completes, the PHY register value will appear
* in the LSW0 register
*/
spin_lock_irqsave(lp->indirect_lock, flags);
temac_iow(lp, XTE_LSW0_OFFSET, (phy_id << 5) | reg);
rc = temac_indirect_in32_locked(lp, XTE_MIIMAI_OFFSET);
spin_unlock_irqrestore(lp->indirect_lock, flags);
dev_dbg(lp->dev, "temac_mdio_read(phy_id=%i, reg=%x) == %x\n",
phy_id, reg, rc);
return rc;
}
static int temac_mdio_write(struct mii_bus *bus, int phy_id, int reg, u16 val)
{
struct temac_local *lp = bus->priv;
unsigned long flags;
dev_dbg(lp->dev, "temac_mdio_write(phy_id=%i, reg=%x, val=%x)\n",
phy_id, reg, val);
/* First write the desired value into the write data register
* and then write the address into the access initiator register
*/
spin_lock_irqsave(lp->indirect_lock, flags);
temac_indirect_out32_locked(lp, XTE_MGTDR_OFFSET, val);
temac_indirect_out32_locked(lp, XTE_MIIMAI_OFFSET, (phy_id << 5) | reg);
spin_unlock_irqrestore(lp->indirect_lock, flags);
return 0;
}
int temac_mdio_setup(struct temac_local *lp, struct platform_device *pdev)
{
struct ll_temac_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct device_node *np = dev_of_node(&pdev->dev);
struct mii_bus *bus;
u32 bus_hz;
int clk_div;
int rc;
struct resource res;
/* Get MDIO bus frequency (if specified) */
bus_hz = 0;
if (np)
of_property_read_u32(np, "clock-frequency", &bus_hz);
else if (pdata)
bus_hz = pdata->mdio_clk_freq;
/* Calculate a reasonable divisor for the clock rate */
clk_div = 0x3f; /* worst-case default setting */
if (bus_hz != 0) {
clk_div = bus_hz / (2500 * 1000 * 2) - 1;
if (clk_div < 1)
clk_div = 1;
if (clk_div > 0x3f)
clk_div = 0x3f;
}
/* Enable the MDIO bus by asserting the enable bit and writing
* in the clock config
*/
temac_indirect_out32(lp, XTE_MC_OFFSET, 1 << 6 | clk_div);
bus = devm_mdiobus_alloc(&pdev->dev);
if (!bus)
return -ENOMEM;
if (np) {
of_address_to_resource(np, 0, &res);
snprintf(bus->id, MII_BUS_ID_SIZE, "%.8llx",
(unsigned long long)res.start);
} else if (pdata) {
snprintf(bus->id, MII_BUS_ID_SIZE, "%.8llx",
pdata->mdio_bus_id);
}
bus->priv = lp;
bus->name = "Xilinx TEMAC MDIO";
bus->read = temac_mdio_read;
bus->write = temac_mdio_write;
bus->parent = lp->dev;
lp->mii_bus = bus;
rc = of_mdiobus_register(bus, np);
if (rc)
return rc;
dev_dbg(lp->dev, "MDIO bus registered; MC:%x\n",
temac_indirect_in32(lp, XTE_MC_OFFSET));
return 0;
}
void temac_mdio_teardown(struct temac_local *lp)
{
mdiobus_unregister(lp->mii_bus);
}