| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Arend Van Spriel | 590 | 49.17% | 17 | 33.33% |
| Franky Lin | 362 | 30.17% | 11 | 21.57% |
| Ian Molton | 73 | 6.08% | 5 | 9.80% |
| Piotr Haber | 71 | 5.92% | 2 | 3.92% |
| Hante Meuleman | 39 | 3.25% | 7 | 13.73% |
| Madhan Mohan R | 19 | 1.58% | 1 | 1.96% |
| Hector Martin | 12 | 1.00% | 1 | 1.96% |
| Hans de Goede | 12 | 1.00% | 2 | 3.92% |
| Daniel Kim | 12 | 1.00% | 1 | 1.96% |
| Christian Daudt | 4 | 0.33% | 2 | 3.92% |
| Chi-Hsien Lin | 3 | 0.25% | 1 | 1.96% |
| Sebastian Andrzej Siewior | 3 | 0.25% | 1 | 1.96% |
| Total | 1200 | 51 |
// SPDX-License-Identifier: ISC /* * Copyright (c) 2010 Broadcom Corporation */ #ifndef BRCMFMAC_SDIO_H #define BRCMFMAC_SDIO_H #include <linux/skbuff.h> #include <linux/firmware.h> #include "firmware.h" #define SDIOD_FBR_SIZE 0x100 /* io_en */ #define SDIO_FUNC_ENABLE_1 0x02 #define SDIO_FUNC_ENABLE_2 0x04 /* io_rdys */ #define SDIO_FUNC_READY_1 0x02 #define SDIO_FUNC_READY_2 0x04 /* intr_status */ #define INTR_STATUS_FUNC1 0x2 #define INTR_STATUS_FUNC2 0x4 /* mask of register map */ #define REG_F0_REG_MASK 0x7FF #define REG_F1_MISC_MASK 0x1FFFF /* function 0 vendor specific CCCR registers */ #define SDIO_CCCR_BRCM_CARDCAP 0xf0 #define SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT BIT(1) #define SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT BIT(2) #define SDIO_CCCR_BRCM_CARDCAP_CMD_NODEC BIT(3) /* Interrupt enable bits for each function */ #define SDIO_CCCR_IEN_FUNC0 BIT(0) #define SDIO_CCCR_IEN_FUNC1 BIT(1) #define SDIO_CCCR_IEN_FUNC2 BIT(2) #define SDIO_CCCR_BRCM_CARDCTRL 0xf1 #define SDIO_CCCR_BRCM_CARDCTRL_WLANRESET BIT(1) #define SDIO_CCCR_BRCM_SEPINT 0xf2 #define SDIO_CCCR_BRCM_SEPINT_MASK BIT(0) #define SDIO_CCCR_BRCM_SEPINT_OE BIT(1) #define SDIO_CCCR_BRCM_SEPINT_ACT_HI BIT(2) /* function 1 miscellaneous registers */ /* sprom command and status */ #define SBSDIO_SPROM_CS 0x10000 /* sprom info register */ #define SBSDIO_SPROM_INFO 0x10001 /* sprom indirect access data byte 0 */ #define SBSDIO_SPROM_DATA_LOW 0x10002 /* sprom indirect access data byte 1 */ #define SBSDIO_SPROM_DATA_HIGH 0x10003 /* sprom indirect access addr byte 0 */ #define SBSDIO_SPROM_ADDR_LOW 0x10004 /* gpio select */ #define SBSDIO_GPIO_SELECT 0x10005 /* gpio output */ #define SBSDIO_GPIO_OUT 0x10006 /* gpio enable */ #define SBSDIO_GPIO_EN 0x10007 /* rev < 7, watermark for sdio device TX path */ #define SBSDIO_WATERMARK 0x10008 /* control busy signal generation */ #define SBSDIO_DEVICE_CTL 0x10009 /* SB Address Window Low (b15) */ #define SBSDIO_FUNC1_SBADDRLOW 0x1000A /* SB Address Window Mid (b23:b16) */ #define SBSDIO_FUNC1_SBADDRMID 0x1000B /* SB Address Window High (b31:b24) */ #define SBSDIO_FUNC1_SBADDRHIGH 0x1000C /* Frame Control (frame term/abort) */ #define SBSDIO_FUNC1_FRAMECTRL 0x1000D /* ChipClockCSR (ALP/HT ctl/status) */ #define SBSDIO_FUNC1_CHIPCLKCSR 0x1000E /* SdioPullUp (on cmd, d0-d2) */ #define SBSDIO_FUNC1_SDIOPULLUP 0x1000F /* Write Frame Byte Count Low */ #define SBSDIO_FUNC1_WFRAMEBCLO 0x10019 /* Write Frame Byte Count High */ #define SBSDIO_FUNC1_WFRAMEBCHI 0x1001A /* Read Frame Byte Count Low */ #define SBSDIO_FUNC1_RFRAMEBCLO 0x1001B /* Read Frame Byte Count High */ #define SBSDIO_FUNC1_RFRAMEBCHI 0x1001C /* MesBusyCtl (rev 11) */ #define SBSDIO_FUNC1_MESBUSYCTRL 0x1001D /* Watermark for sdio device RX path */ #define SBSDIO_MESBUSY_RXFIFO_WM_MASK 0x7F #define SBSDIO_MESBUSY_RXFIFO_WM_SHIFT 0 /* Enable busy capability for MES access */ #define SBSDIO_MESBUSYCTRL_ENAB 0x80 #define SBSDIO_MESBUSYCTRL_ENAB_SHIFT 7 /* Sdio Core Rev 12 */ #define SBSDIO_FUNC1_WAKEUPCTRL 0x1001E #define SBSDIO_FUNC1_WCTRL_ALPWAIT_MASK 0x1 #define SBSDIO_FUNC1_WCTRL_ALPWAIT_SHIFT 0 #define SBSDIO_FUNC1_WCTRL_HTWAIT_MASK 0x2 #define SBSDIO_FUNC1_WCTRL_HTWAIT_SHIFT 1 #define SBSDIO_FUNC1_SLEEPCSR 0x1001F #define SBSDIO_FUNC1_SLEEPCSR_KSO_MASK 0x1 #define SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT 0 #define SBSDIO_FUNC1_SLEEPCSR_KSO_EN 1 #define SBSDIO_FUNC1_SLEEPCSR_DEVON_MASK 0x2 #define SBSDIO_FUNC1_SLEEPCSR_DEVON_SHIFT 1 #define SBSDIO_FUNC1_MISC_REG_START 0x10000 /* f1 misc register start */ #define SBSDIO_FUNC1_MISC_REG_LIMIT 0x1001F /* f1 misc register end */ /* function 1 OCP space */ /* sb offset addr is <= 15 bits, 32k */ #define SBSDIO_SB_OFT_ADDR_MASK 0x07FFF #define SBSDIO_SB_OFT_ADDR_LIMIT 0x08000 /* with b15, maps to 32-bit SB access */ #define SBSDIO_SB_ACCESS_2_4B_FLAG 0x08000 /* Address bits from SBADDR regs */ #define SBSDIO_SBWINDOW_MASK 0xffff8000 #define SDIOH_READ 0 /* Read request */ #define SDIOH_WRITE 1 /* Write request */ #define SDIOH_DATA_FIX 0 /* Fixed addressing */ #define SDIOH_DATA_INC 1 /* Incremental addressing */ /* internal return code */ #define SUCCESS 0 #define ERROR 1 /* Packet alignment for most efficient SDIO (can change based on platform) */ #define BRCMF_SDALIGN (1 << 6) /* watchdog polling interval */ #define BRCMF_WD_POLL msecs_to_jiffies(10) /** * enum brcmf_sdiod_state - the state of the bus. * * @BRCMF_SDIOD_DOWN: Device can be accessed, no DPC. * @BRCMF_SDIOD_DATA: Ready for data transfers, DPC enabled. * @BRCMF_SDIOD_NOMEDIUM: No medium access to dongle possible. */ enum brcmf_sdiod_state { BRCMF_SDIOD_DOWN, BRCMF_SDIOD_DATA, BRCMF_SDIOD_NOMEDIUM }; struct brcmf_sdreg { int func; int offset; int value; }; struct brcmf_sdio; struct brcmf_sdiod_freezer; struct brcmf_sdio_dev { struct sdio_func *func1; struct sdio_func *func2; u32 sbwad; /* Save backplane window address */ struct brcmf_core *cc_core; /* chipcommon core info struct */ struct brcmf_sdio *bus; struct device *dev; struct brcmf_bus *bus_if; struct brcmf_mp_device *settings; bool oob_irq_requested; bool sd_irq_requested; bool irq_en; /* irq enable flags */ spinlock_t irq_en_lock; bool sg_support; uint max_request_size; ushort max_segment_count; uint max_segment_size; uint txglomsz; struct sg_table sgtable; char fw_name[BRCMF_FW_NAME_LEN]; char nvram_name[BRCMF_FW_NAME_LEN]; char clm_name[BRCMF_FW_NAME_LEN]; bool wowl_enabled; bool func1_power_manageable; bool func2_power_manageable; enum brcmf_sdiod_state state; struct brcmf_sdiod_freezer *freezer; const struct firmware *clm_fw; }; /* sdio core registers */ struct sdpcmd_regs { u32 corecontrol; /* 0x00, rev8 */ u32 corestatus; /* rev8 */ u32 PAD[1]; u32 biststatus; /* rev8 */ /* PCMCIA access */ u16 pcmciamesportaladdr; /* 0x010, rev8 */ u16 PAD[1]; u16 pcmciamesportalmask; /* rev8 */ u16 PAD[1]; u16 pcmciawrframebc; /* rev8 */ u16 PAD[1]; u16 pcmciaunderflowtimer; /* rev8 */ u16 PAD[1]; /* interrupt */ u32 intstatus; /* 0x020, rev8 */ u32 hostintmask; /* rev8 */ u32 intmask; /* rev8 */ u32 sbintstatus; /* rev8 */ u32 sbintmask; /* rev8 */ u32 funcintmask; /* rev4 */ u32 PAD[2]; u32 tosbmailbox; /* 0x040, rev8 */ u32 tohostmailbox; /* rev8 */ u32 tosbmailboxdata; /* rev8 */ u32 tohostmailboxdata; /* rev8 */ /* synchronized access to registers in SDIO clock domain */ u32 sdioaccess; /* 0x050, rev8 */ u32 PAD[3]; /* PCMCIA frame control */ u8 pcmciaframectrl; /* 0x060, rev8 */ u8 PAD[3]; u8 pcmciawatermark; /* rev8 */ u8 PAD[155]; /* interrupt batching control */ u32 intrcvlazy; /* 0x100, rev8 */ u32 PAD[3]; /* counters */ u32 cmd52rd; /* 0x110, rev8 */ u32 cmd52wr; /* rev8 */ u32 cmd53rd; /* rev8 */ u32 cmd53wr; /* rev8 */ u32 abort; /* rev8 */ u32 datacrcerror; /* rev8 */ u32 rdoutofsync; /* rev8 */ u32 wroutofsync; /* rev8 */ u32 writebusy; /* rev8 */ u32 readwait; /* rev8 */ u32 readterm; /* rev8 */ u32 writeterm; /* rev8 */ u32 PAD[40]; u32 clockctlstatus; /* rev8 */ u32 PAD[7]; u32 PAD[128]; /* DMA engines */ /* SDIO/PCMCIA CIS region */ char cis[512]; /* 0x400-0x5ff, rev6 */ /* PCMCIA function control registers */ char pcmciafcr[256]; /* 0x600-6ff, rev6 */ u16 PAD[55]; /* PCMCIA backplane access */ u16 backplanecsr; /* 0x76E, rev6 */ u16 backplaneaddr0; /* rev6 */ u16 backplaneaddr1; /* rev6 */ u16 backplaneaddr2; /* rev6 */ u16 backplaneaddr3; /* rev6 */ u16 backplanedata0; /* rev6 */ u16 backplanedata1; /* rev6 */ u16 backplanedata2; /* rev6 */ u16 backplanedata3; /* rev6 */ u16 PAD[31]; /* sprom "size" & "blank" info */ u16 spromstatus; /* 0x7BE, rev2 */ u32 PAD[464]; u16 PAD[0x80]; }; /* Register/deregister interrupt handler. */ int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev); void brcmf_sdiod_intr_unregister(struct brcmf_sdio_dev *sdiodev); /* SDIO device register access interface */ /* Accessors for SDIO Function 0 */ #define brcmf_sdiod_func0_rb(sdiodev, addr, r) \ sdio_f0_readb((sdiodev)->func1, (addr), (r)) #define brcmf_sdiod_func0_wb(sdiodev, addr, v, ret) \ sdio_f0_writeb((sdiodev)->func1, (v), (addr), (ret)) /* Accessors for SDIO Function 1 */ #define brcmf_sdiod_readb(sdiodev, addr, r) \ sdio_readb((sdiodev)->func1, (addr), (r)) #define brcmf_sdiod_writeb(sdiodev, addr, v, ret) \ sdio_writeb((sdiodev)->func1, (v), (addr), (ret)) u32 brcmf_sdiod_readl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret); void brcmf_sdiod_writel(struct brcmf_sdio_dev *sdiodev, u32 addr, u32 data, int *ret); /* Buffer transfer to/from device (client) core via cmd53. * fn: function number * flags: backplane width, address increment, sync/async * buf: pointer to memory data buffer * nbytes: number of bytes to transfer to/from buf * pkt: pointer to packet associated with buf (if any) * complete: callback function for command completion (async only) * handle: handle for completion callback (first arg in callback) * Returns 0 or error code. * NOTE: Async operation is not currently supported. */ int brcmf_sdiod_send_pkt(struct brcmf_sdio_dev *sdiodev, struct sk_buff_head *pktq); int brcmf_sdiod_send_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes); int brcmf_sdiod_recv_pkt(struct brcmf_sdio_dev *sdiodev, struct sk_buff *pkt); int brcmf_sdiod_recv_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes); int brcmf_sdiod_recv_chain(struct brcmf_sdio_dev *sdiodev, struct sk_buff_head *pktq, uint totlen); /* Flags bits */ /* Four-byte target (backplane) width (vs. two-byte) */ #define SDIO_REQ_4BYTE 0x1 /* Fixed address (FIFO) (vs. incrementing address) */ #define SDIO_REQ_FIXED 0x2 /* Read/write to memory block (F1, no FIFO) via CMD53 (sync only). * rw: read or write (0/1) * addr: direct SDIO address * buf: pointer to memory data buffer * nbytes: number of bytes to transfer to/from buf * Returns 0 or error code. */ int brcmf_sdiod_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address, u8 *data, uint size); /* Issue an abort to the specified function */ int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, struct sdio_func *func); void brcmf_sdiod_sgtable_alloc(struct brcmf_sdio_dev *sdiodev); void brcmf_sdiod_change_state(struct brcmf_sdio_dev *sdiodev, enum brcmf_sdiod_state state); bool brcmf_sdiod_freezing(struct brcmf_sdio_dev *sdiodev); void brcmf_sdiod_try_freeze(struct brcmf_sdio_dev *sdiodev); void brcmf_sdiod_freezer_count(struct brcmf_sdio_dev *sdiodev); void brcmf_sdiod_freezer_uncount(struct brcmf_sdio_dev *sdiodev); int brcmf_sdiod_probe(struct brcmf_sdio_dev *sdiodev); int brcmf_sdiod_remove(struct brcmf_sdio_dev *sdiodev); struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev); void brcmf_sdio_remove(struct brcmf_sdio *bus); void brcmf_sdio_isr(struct brcmf_sdio *bus, bool in_isr); void brcmf_sdio_wd_timer(struct brcmf_sdio *bus, bool active); void brcmf_sdio_wowl_config(struct device *dev, bool enabled); int brcmf_sdio_sleep(struct brcmf_sdio *bus, bool sleep); void brcmf_sdio_trigger_dpc(struct brcmf_sdio *bus); #endif /* BRCMFMAC_SDIO_H */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1