Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Johannes Berg | 1183 | 68.26% | 21 | 23.60% |
Miri Korenblit | 187 | 10.79% | 10 | 11.24% |
Sara Sharon | 101 | 5.83% | 16 | 17.98% |
Gregory Greenman | 55 | 3.17% | 8 | 8.99% |
Andrei Otcheretianski | 44 | 2.54% | 2 | 2.25% |
Emmanuel Grumbach | 37 | 2.14% | 10 | 11.24% |
Avraham Stern | 30 | 1.73% | 3 | 3.37% |
Liad Kaufman | 23 | 1.33% | 3 | 3.37% |
Chaya Rachel Ivgy | 16 | 0.92% | 1 | 1.12% |
Nathan Errera | 15 | 0.87% | 3 | 3.37% |
Luciano Coelho | 14 | 0.81% | 4 | 4.49% |
Eytan Lifshitz | 7 | 0.40% | 1 | 1.12% |
striebit | 4 | 0.23% | 1 | 1.12% |
Eliad Peller | 4 | 0.23% | 1 | 1.12% |
Eyal Shapira | 3 | 0.17% | 1 | 1.12% |
Naftali Goldstein | 3 | 0.17% | 1 | 1.12% |
Mordechai Goodstein | 3 | 0.17% | 1 | 1.12% |
Wey-Yi Guy | 3 | 0.17% | 1 | 1.12% |
Benjamin Berg | 1 | 0.06% | 1 | 1.12% |
Total | 1733 | 89 |
/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ /* * Copyright (C) 2012-2014, 2018-2023 Intel Corporation * Copyright (C) 2013-2014 Intel Mobile Communications GmbH * Copyright (C) 2015-2016 Intel Deutschland GmbH */ #ifndef __sta_h__ #define __sta_h__ #include <linux/spinlock.h> #include <net/mac80211.h> #include <linux/wait.h> #include "iwl-trans.h" /* for IWL_MAX_TID_COUNT */ #include "fw-api.h" /* IWL_MVM_STATION_COUNT_MAX */ #include "rs.h" struct iwl_mvm; struct iwl_mvm_vif; /** * DOC: DQA - Dynamic Queue Allocation -introduction * * Dynamic Queue Allocation (AKA "DQA") is a feature implemented in iwlwifi * driver to allow dynamic allocation of queues on-demand, rather than allocate * them statically ahead of time. Ideally, we would like to allocate one queue * per RA/TID, thus allowing an AP - for example - to send BE traffic to STA2 * even if it also needs to send traffic to a sleeping STA1, without being * blocked by the sleeping station. * * Although the queues in DQA mode are dynamically allocated, there are still * some queues that are statically allocated: * TXQ #0 - command queue * TXQ #1 - aux frames * TXQ #2 - P2P device frames * TXQ #3 - P2P GO/SoftAP GCAST/BCAST frames * TXQ #4 - BSS DATA frames queue * TXQ #5-8 - Non-QoS and MGMT frames queue pool * TXQ #9 - P2P GO/SoftAP probe responses * TXQ #10-31 - DATA frames queue pool * The queues are dynamically taken from either the MGMT frames queue pool or * the DATA frames one. See the %iwl_mvm_dqa_txq for more information on every * queue. * * When a frame for a previously unseen RA/TID comes in, it needs to be deferred * until a queue is allocated for it, and only then can be TXed. Therefore, it * is placed into %iwl_mvm_tid_data.deferred_tx_frames, and a worker called * %mvm->add_stream_wk later allocates the queues and TXes the deferred frames. * * For convenience, MGMT is considered as if it has TID=8, and go to the MGMT * queues in the pool. If there is no longer a free MGMT queue to allocate, a * queue will be allocated from the DATA pool instead. Since QoS NDPs can create * a problem for aggregations, they too will use a MGMT queue. * * When adding a STA, a DATA queue is reserved for it so that it can TX from * it. If no such free queue exists for reserving, the STA addition will fail. * * If the DATA queue pool gets exhausted, no new STA will be accepted, and if a * new RA/TID comes in for an existing STA, one of the STA's queues will become * shared and will serve more than the single TID (but always for the same RA!). * * When a RA/TID needs to become aggregated, no new queue is required to be * allocated, only mark the queue as aggregated via the ADD_STA command. Note, * however, that a shared queue cannot be aggregated, and only after the other * TIDs become inactive and are removed - only then can the queue be * reconfigured and become aggregated. * * When removing a station, its queues are returned to the pool for reuse. Here * we also need to make sure that we are synced with the worker thread that TXes * the deferred frames so we don't get into a situation where the queues are * removed and then the worker puts deferred frames onto the released queues or * tries to allocate new queues for a STA we don't need anymore. */ /** * DOC: station table - introduction * * The station table is a list of data structure that reprensent the stations. * In STA/P2P client mode, the driver will hold one station for the AP/ GO. * In GO/AP mode, the driver will have as many stations as associated clients. * All these stations are reflected in the fw's station table. The driver * keeps the fw's station table up to date with the ADD_STA command. Stations * can be removed by the REMOVE_STA command. * * All the data related to a station is held in the structure %iwl_mvm_sta * which is embed in the mac80211's %ieee80211_sta (in the drv_priv) area. * This data includes the index of the station in the fw, per tid information * (sequence numbers, Block-ack state machine, etc...). The stations are * created and deleted by the %sta_state callback from %ieee80211_ops. * * The driver holds a map: %fw_id_to_mac_id that allows to fetch a * %ieee80211_sta (and the %iwl_mvm_sta embedded into it) based on a fw * station index. That way, the driver is able to get the tid related data in * O(1) in time sensitive paths (Tx / Tx response / BA notification). These * paths are triggered by the fw, and the driver needs to get a pointer to the * %ieee80211 structure. This map helps to get that pointer quickly. */ /** * DOC: station table - locking * * As stated before, the station is created / deleted by mac80211's %sta_state * callback from %ieee80211_ops which can sleep. The next paragraph explains * the locking of a single stations, the next ones relates to the station * table. * * The station holds the sequence number per tid. So this data needs to be * accessed in the Tx path (which is softIRQ). It also holds the Block-Ack * information (the state machine / and the logic that checks if the queues * were drained), so it also needs to be accessible from the Tx response flow. * In short, the station needs to be access from sleepable context as well as * from tasklets, so the station itself needs a spinlock. * * The writers of %fw_id_to_mac_id map are serialized by the global mutex of * the mvm op_mode. This is possible since %sta_state can sleep. * The pointers in this map are RCU protected, hence we won't replace the * station while we have Tx / Tx response / BA notification running. * * If a station is deleted while it still has packets in its A-MPDU queues, * then the reclaim flow will notice that there is no station in the map for * sta_id and it will dump the responses. */ /** * DOC: station table - internal stations * * The FW needs a few internal stations that are not reflected in * mac80211, such as broadcast station in AP / GO mode, or AUX sta for * scanning and P2P device (during the GO negotiation). * For these kind of stations we have %iwl_mvm_int_sta struct which holds the * data relevant for them from both %iwl_mvm_sta and %ieee80211_sta. * Usually the data for these stations is static, so no locking is required, * and no TID data as this is also not needed. * One thing to note, is that these stations have an ID in the fw, but not * in mac80211. In order to "reserve" them a sta_id in %fw_id_to_mac_id * we fill ERR_PTR(EINVAL) in this mapping and all other dereferencing of * pointers from this mapping need to check that the value is not error * or NULL. * * Currently there is only one auxiliary station for scanning, initialized * on init. */ /** * DOC: station table - AP Station in STA mode * * %iwl_mvm_vif includes the index of the AP station in the fw's STA table: * %ap_sta_id. To get the point to the corresponding %ieee80211_sta, * &fw_id_to_mac_id can be used. Due to the way the fw works, we must not remove * the AP station from the fw before setting the MAC context as unassociated. * Hence, %fw_id_to_mac_id[%ap_sta_id] will be NULLed when the AP station is * removed by mac80211, but the station won't be removed in the fw until the * VIF is set as unassociated. Then, %ap_sta_id will be invalidated. */ /** * DOC: station table - Drain vs. Flush * * Flush means that all the frames in the SCD queue are dumped regardless the * station to which they were sent. We do that when we disassociate and before * we remove the STA of the AP. The flush can be done synchronously against the * fw. * Drain means that the fw will drop all the frames sent to a specific station. * This is useful when a client (if we are IBSS / GO or AP) disassociates. */ /** * DOC: station table - fw restart * * When the fw asserts, or we have any other issue that requires to reset the * driver, we require mac80211 to reconfigure the driver. Since the private * data of the stations is embed in mac80211's %ieee80211_sta, that data will * not be zeroed and needs to be reinitialized manually. * %IWL_MVM_STATUS_IN_HW_RESTART is set during restart and that will hint us * that we must not allocate a new sta_id but reuse the previous one. This * means that the stations being re-added after the reset will have the same * place in the fw as before the reset. We do need to zero the %fw_id_to_mac_id * map, since the stations aren't in the fw any more. Internal stations that * are not added by mac80211 will be re-added in the init flow that is called * after the restart: mac80211 call's %iwl_mvm_mac_start which calls to * %iwl_mvm_up. */ /** * DOC: AP mode - PS * * When a station is asleep, the fw will set it as "asleep". All frames on * shared queues (i.e. non-aggregation queues) to that station will be dropped * by the fw (%TX_STATUS_FAIL_DEST_PS failure code). * * AMPDUs are in a separate queue that is stopped by the fw. We just need to * let mac80211 know when there are frames in these queues so that it can * properly handle trigger frames. * * When a trigger frame is received, mac80211 tells the driver to send frames * from the AMPDU queues or sends frames to non-aggregation queues itself, * depending on which ACs are delivery-enabled and what TID has frames to * transmit. Note that mac80211 has all the knowledge since all the non-agg * frames are buffered / filtered, and the driver tells mac80211 about agg * frames). The driver needs to tell the fw to let frames out even if the * station is asleep. This is done by %iwl_mvm_sta_modify_sleep_tx_count. * * When we receive a frame from that station with PM bit unset, the driver * needs to let the fw know that this station isn't asleep any more. This is * done by %iwl_mvm_sta_modify_ps_wake in response to mac80211 signaling the * station's wakeup. * * For a GO, the Service Period might be cut short due to an absence period * of the GO. In this (and all other cases) the firmware notifies us with the * EOSP_NOTIFICATION, and we notify mac80211 of that. Further frames that we * already sent to the device will be rejected again. * * See also "AP support for powersaving clients" in mac80211.h. */ /** * enum iwl_mvm_agg_state * * The state machine of the BA agreement establishment / tear down. * These states relate to a specific RA / TID. * * @IWL_AGG_OFF: aggregation is not used * @IWL_AGG_QUEUED: aggregation start work has been queued * @IWL_AGG_STARTING: aggregation are starting (between start and oper) * @IWL_AGG_ON: aggregation session is up * @IWL_EMPTYING_HW_QUEUE_ADDBA: establishing a BA session - waiting for the * HW queue to be empty from packets for this RA /TID. * @IWL_EMPTYING_HW_QUEUE_DELBA: tearing down a BA session - waiting for the * HW queue to be empty from packets for this RA /TID. */ enum iwl_mvm_agg_state { IWL_AGG_OFF = 0, IWL_AGG_QUEUED, IWL_AGG_STARTING, IWL_AGG_ON, IWL_EMPTYING_HW_QUEUE_ADDBA, IWL_EMPTYING_HW_QUEUE_DELBA, }; /** * struct iwl_mvm_tid_data - holds the states for each RA / TID * @seq_number: the next WiFi sequence number to use * @next_reclaimed: the WiFi sequence number of the next packet to be acked. * This is basically (last acked packet++). * @rate_n_flags: Rate at which Tx was attempted. Holds the data between the * Tx response (TX_CMD), and the block ack notification (COMPRESSED_BA). * @lq_color: the color of the LQ command as it appears in tx response. * @amsdu_in_ampdu_allowed: true if A-MSDU in A-MPDU is allowed. * @state: state of the BA agreement establishment / tear down. * @txq_id: Tx queue used by the BA session / DQA * @ssn: the first packet to be sent in AGG HW queue in Tx AGG start flow, or * the first packet to be sent in legacy HW queue in Tx AGG stop flow. * Basically when next_reclaimed reaches ssn, we can tell mac80211 that * we are ready to finish the Tx AGG stop / start flow. * @tx_time: medium time consumed by this A-MPDU * @tpt_meas_start: time of the throughput measurements start, is reset every HZ * @tx_count_last: number of frames transmitted during the last second * @tx_count: counts the number of frames transmitted since the last reset of * tpt_meas_start */ struct iwl_mvm_tid_data { u16 seq_number; u16 next_reclaimed; /* The rest is Tx AGG related */ u32 rate_n_flags; u8 lq_color; bool amsdu_in_ampdu_allowed; enum iwl_mvm_agg_state state; u16 txq_id; u16 ssn; u16 tx_time; unsigned long tpt_meas_start; u32 tx_count_last; u32 tx_count; }; struct iwl_mvm_key_pn { struct rcu_head rcu_head; struct { u8 pn[IWL_MAX_TID_COUNT][IEEE80211_CCMP_PN_LEN]; } ____cacheline_aligned_in_smp q[]; }; /** * enum iwl_mvm_rxq_notif_type - Internal message identifier * * @IWL_MVM_RXQ_EMPTY: empty sync notification * @IWL_MVM_RXQ_NOTIF_DEL_BA: notify RSS queues of delBA */ enum iwl_mvm_rxq_notif_type { IWL_MVM_RXQ_EMPTY, IWL_MVM_RXQ_NOTIF_DEL_BA, }; /** * struct iwl_mvm_internal_rxq_notif - Internal representation of the data sent * in &iwl_rxq_sync_cmd. Should be DWORD aligned. * FW is agnostic to the payload, so there are no endianity requirements. * * @type: value from &iwl_mvm_rxq_notif_type * @sync: ctrl path is waiting for all notifications to be received * @cookie: internal cookie to identify old notifications * @data: payload */ struct iwl_mvm_internal_rxq_notif { u16 type; u16 sync; u32 cookie; u8 data[]; } __packed; struct iwl_mvm_delba_data { u32 baid; } __packed; /** * struct iwl_mvm_rxq_dup_data - per station per rx queue data * @last_seq: last sequence per tid for duplicate packet detection * @last_sub_frame: last subframe packet */ struct iwl_mvm_rxq_dup_data { __le16 last_seq[IWL_MAX_TID_COUNT + 1]; u8 last_sub_frame[IWL_MAX_TID_COUNT + 1]; } ____cacheline_aligned_in_smp; /** * struct iwl_mvm_link_sta - link specific parameters of a station * @rcu_head: used for freeing the data * @sta_id: the index of the station in the fw * @lq_sta: holds rate scaling data, either for the case when RS is done in * the driver - %rs_drv or in the FW - %rs_fw. * @orig_amsdu_len: used to save the original amsdu_len when it is changed via * debugfs. If it's set to 0, it means that it is it's not set via * debugfs. * @avg_energy: energy as reported by FW statistics notification */ struct iwl_mvm_link_sta { struct rcu_head rcu_head; u32 sta_id; union { struct iwl_lq_sta_rs_fw rs_fw; struct iwl_lq_sta rs_drv; } lq_sta; u16 orig_amsdu_len; u8 avg_energy; }; /** * struct iwl_mvm_sta - representation of a station in the driver * @vif: the interface the station belongs to * @tfd_queue_msk: the tfd queues used by the station * @mac_id_n_color: the MAC context this station is linked to * @tid_disable_agg: bitmap: if bit(tid) is set, the fw won't send ampdus for * tid. * @sta_type: station type * @authorized: indicates station is authorized * @sta_state: station state according to enum %ieee80211_sta_state * @bt_reduced_txpower: is reduced tx power enabled for this station * @next_status_eosp: the next reclaimed packet is a PS-Poll response and * we need to signal the EOSP * @lock: lock to protect the whole struct. Since %tid_data is access from Tx * and from Tx response flow, it needs a spinlock. * @tid_data: per tid data + mgmt. Look at %iwl_mvm_tid_data. * @tid_to_baid: a simple map of TID to baid * @vif: a vif pointer * @reserved_queue: the queue reserved for this STA for DQA purposes * Every STA has is given one reserved queue to allow it to operate. If no * such queue can be guaranteed, the STA addition will fail. * @tx_protection: reference counter for controlling the Tx protection. * @tt_tx_protection: is thermal throttling enable Tx protection? * @disable_tx: is tx to this STA disabled? * @amsdu_enabled: bitmap of TX AMSDU allowed TIDs. * In case TLC offload is not active it is either 0xFFFF or 0. * @max_amsdu_len: max AMSDU length * @sleeping: indicates the station is sleeping (when not offloaded to FW) * @agg_tids: bitmap of tids whose status is operational aggregated (IWL_AGG_ON) * @sleeping: sta sleep transitions in power management * @sleep_tx_count: the number of frames that we told the firmware to let out * even when that station is asleep. This is useful in case the queue * gets empty before all the frames were sent, which can happen when * we are sending frames from an AMPDU queue and there was a hole in * the BA window. To be used for UAPSD only. * @ptk_pn: per-queue PTK PN data structures * @dup_data: per queue duplicate packet detection data * @tx_ant: the index of the antenna to use for data tx to this station. Only * used during connection establishment (e.g. for the 4 way handshake * exchange). * @pairwise_cipher: used to feed iwlmei upon authorization * @deflink: the default link station, for non-MLO STA, all link specific data * is accessed via deflink (or link[0]). For MLO, it will hold data of the * first added link STA. * @link: per link sta entries. For non-MLO only link[0] holds data. For MLO, * link[0] points to deflink and link[link_id] is allocated when new link * sta is added. * * When mac80211 creates a station it reserves some space (hw->sta_data_size) * in the structure for use by driver. This structure is placed in that * space. * */ struct iwl_mvm_sta { u32 tfd_queue_msk; u32 mac_id_n_color; u16 tid_disable_agg; u8 sta_type; enum ieee80211_sta_state sta_state; bool bt_reduced_txpower; bool next_status_eosp; bool authorized; spinlock_t lock; struct iwl_mvm_tid_data tid_data[IWL_MAX_TID_COUNT + 1]; u8 tid_to_baid[IWL_MAX_TID_COUNT]; struct ieee80211_vif *vif; struct iwl_mvm_key_pn __rcu *ptk_pn[4]; struct iwl_mvm_rxq_dup_data *dup_data; u8 reserved_queue; /* Temporary, until the new TLC will control the Tx protection */ s8 tx_protection; bool tt_tx_protection; bool disable_tx; u16 amsdu_enabled; u16 max_amsdu_len; bool sleeping; u8 agg_tids; u8 sleep_tx_count; u8 tx_ant; u32 pairwise_cipher; struct iwl_mvm_link_sta deflink; struct iwl_mvm_link_sta __rcu *link[IEEE80211_MLD_MAX_NUM_LINKS]; }; u16 iwl_mvm_tid_queued(struct iwl_mvm *mvm, struct iwl_mvm_tid_data *tid_data); static inline struct iwl_mvm_sta * iwl_mvm_sta_from_mac80211(struct ieee80211_sta *sta) { return (void *)sta->drv_priv; } /** * struct iwl_mvm_int_sta - representation of an internal station (auxiliary or * broadcast) * @sta_id: the index of the station in the fw (will be replaced by id_n_color) * @type: station type * @tfd_queue_msk: the tfd queues used by the station */ struct iwl_mvm_int_sta { u32 sta_id; u8 type; u32 tfd_queue_msk; }; /** * Send the STA info to the FW. * * @mvm: the iwl_mvm* to use * @sta: the STA * @update: this is true if the FW is being updated about a STA it already knows * about. Otherwise (if this is a new STA), this should be false. * @flags: if update==true, this marks what is being changed via ORs of values * from enum iwl_sta_modify_flag. Otherwise, this is ignored. */ int iwl_mvm_sta_send_to_fw(struct iwl_mvm *mvm, struct ieee80211_sta *sta, bool update, unsigned int flags); int iwl_mvm_find_free_sta_id(struct iwl_mvm *mvm, enum nl80211_iftype iftype); int iwl_mvm_sta_init(struct iwl_mvm *mvm, struct ieee80211_vif *vif, struct ieee80211_sta *sta, int sta_id, u8 sta_type); int iwl_mvm_add_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif, struct ieee80211_sta *sta); static inline int iwl_mvm_update_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif, struct ieee80211_sta *sta) { return iwl_mvm_sta_send_to_fw(mvm, sta, true, 0); } void iwl_mvm_realloc_queues_after_restart(struct iwl_mvm *mvm, struct ieee80211_sta *sta); int iwl_mvm_wait_sta_queues_empty(struct iwl_mvm *mvm, struct iwl_mvm_sta *mvm_sta); bool iwl_mvm_sta_del(struct iwl_mvm *mvm, struct ieee80211_vif *vif, struct ieee80211_sta *sta, struct ieee80211_link_sta *link_sta, int *ret); int iwl_mvm_rm_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif, struct ieee80211_sta *sta); int iwl_mvm_rm_sta_id(struct iwl_mvm *mvm, struct ieee80211_vif *vif, u8 sta_id); int iwl_mvm_set_sta_key(struct iwl_mvm *mvm, struct ieee80211_vif *vif, struct ieee80211_sta *sta, struct ieee80211_key_conf *keyconf, u8 key_offset); int iwl_mvm_remove_sta_key(struct iwl_mvm *mvm, struct ieee80211_vif *vif, struct ieee80211_sta *sta, struct ieee80211_key_conf *keyconf); void iwl_mvm_update_tkip_key(struct iwl_mvm *mvm, struct ieee80211_vif *vif, struct ieee80211_key_conf *keyconf, struct ieee80211_sta *sta, u32 iv32, u16 *phase1key); void iwl_mvm_rx_eosp_notif(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb); /* AMPDU */ int iwl_mvm_sta_rx_agg(struct iwl_mvm *mvm, struct ieee80211_sta *sta, int tid, u16 ssn, bool start, u16 buf_size, u16 timeout); int iwl_mvm_sta_tx_agg_start(struct iwl_mvm *mvm, struct ieee80211_vif *vif, struct ieee80211_sta *sta, u16 tid, u16 *ssn); int iwl_mvm_sta_tx_agg_oper(struct iwl_mvm *mvm, struct ieee80211_vif *vif, struct ieee80211_sta *sta, u16 tid, u16 buf_size, bool amsdu); int iwl_mvm_sta_tx_agg_stop(struct iwl_mvm *mvm, struct ieee80211_vif *vif, struct ieee80211_sta *sta, u16 tid); int iwl_mvm_sta_tx_agg_flush(struct iwl_mvm *mvm, struct ieee80211_vif *vif, struct ieee80211_sta *sta, u16 tid); int iwl_mvm_sta_tx_agg(struct iwl_mvm *mvm, struct ieee80211_sta *sta, int tid, u8 queue, bool start); int iwl_mvm_add_aux_sta(struct iwl_mvm *mvm, u32 lmac_id); int iwl_mvm_rm_aux_sta(struct iwl_mvm *mvm); int iwl_mvm_alloc_bcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif); void iwl_mvm_free_bcast_sta_queues(struct iwl_mvm *mvm, struct ieee80211_vif *vif); int iwl_mvm_send_add_bcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif); int iwl_mvm_add_p2p_bcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif); int iwl_mvm_send_rm_bcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif); int iwl_mvm_rm_p2p_bcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif); int iwl_mvm_add_mcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif); int iwl_mvm_rm_mcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif); int iwl_mvm_allocate_int_sta(struct iwl_mvm *mvm, struct iwl_mvm_int_sta *sta, u32 qmask, enum nl80211_iftype iftype, u8 type); void iwl_mvm_dealloc_bcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif); void iwl_mvm_dealloc_int_sta(struct iwl_mvm *mvm, struct iwl_mvm_int_sta *sta); int iwl_mvm_add_snif_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif); int iwl_mvm_rm_snif_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif); void iwl_mvm_dealloc_snif_sta(struct iwl_mvm *mvm); void iwl_mvm_sta_modify_ps_wake(struct iwl_mvm *mvm, struct ieee80211_sta *sta); void iwl_mvm_sta_modify_sleep_tx_count(struct iwl_mvm *mvm, struct ieee80211_sta *sta, enum ieee80211_frame_release_type reason, u16 cnt, u16 tids, bool more_data, bool single_sta_queue); int iwl_mvm_drain_sta(struct iwl_mvm *mvm, struct iwl_mvm_sta *mvmsta, bool drain); void iwl_mvm_sta_modify_disable_tx(struct iwl_mvm *mvm, struct iwl_mvm_sta *mvmsta, bool disable); void iwl_mvm_sta_modify_disable_tx_ap(struct iwl_mvm *mvm, struct ieee80211_sta *sta, bool disable); void iwl_mvm_modify_all_sta_disable_tx(struct iwl_mvm *mvm, struct iwl_mvm_vif *mvmvif, bool disable); void iwl_mvm_csa_client_absent(struct iwl_mvm *mvm, struct ieee80211_vif *vif); void iwl_mvm_add_new_dqa_stream_wk(struct work_struct *wk); int iwl_mvm_add_pasn_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif, struct iwl_mvm_int_sta *sta, u8 *addr, u32 cipher, u8 *key, u32 key_len); void iwl_mvm_cancel_channel_switch(struct iwl_mvm *mvm, struct ieee80211_vif *vif, u32 id); /* Queues */ int iwl_mvm_tvqm_enable_txq(struct iwl_mvm *mvm, struct ieee80211_sta *sta, u8 sta_id, u8 tid, unsigned int timeout); /* Sta state */ /** * struct iwl_mvm_sta_state_ops - callbacks for the sta_state() ops * * Since the only difference between both MLD and * non-MLD versions of sta_state() is these function calls, * each version will send its specific function calls to * %iwl_mvm_mac_sta_state_common(). * * @add_sta: pointer to the function that adds a new sta * @update_sta: pointer to the function that updates a sta * @rm_sta: pointer to the functions that removes a sta * @mac_ctxt_changed: pointer to the function that handles a change in mac ctxt */ struct iwl_mvm_sta_state_ops { int (*add_sta)(struct iwl_mvm *mvm, struct ieee80211_vif *vif, struct ieee80211_sta *sta); int (*update_sta)(struct iwl_mvm *mvm, struct ieee80211_vif *vif, struct ieee80211_sta *sta); int (*rm_sta)(struct iwl_mvm *mvm, struct ieee80211_vif *vif, struct ieee80211_sta *sta); int (*mac_ctxt_changed)(struct iwl_mvm *mvm, struct ieee80211_vif *vif, bool force_assoc_off); }; int iwl_mvm_mac_sta_state_common(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_sta *sta, enum ieee80211_sta_state old_state, enum ieee80211_sta_state new_state, const struct iwl_mvm_sta_state_ops *callbacks); /* New MLD STA related APIs */ /* STA */ int iwl_mvm_mld_add_bcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif, struct ieee80211_bss_conf *link_conf); int iwl_mvm_mld_add_snif_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif, struct ieee80211_bss_conf *link_conf); int iwl_mvm_mld_add_mcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif, struct ieee80211_bss_conf *link_conf); int iwl_mvm_mld_add_aux_sta(struct iwl_mvm *mvm, u32 lmac_id); int iwl_mvm_mld_rm_bcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif, struct ieee80211_bss_conf *link_conf); int iwl_mvm_mld_rm_snif_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif); int iwl_mvm_mld_rm_mcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif, struct ieee80211_bss_conf *link_conf); int iwl_mvm_mld_rm_aux_sta(struct iwl_mvm *mvm); int iwl_mvm_mld_add_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif, struct ieee80211_sta *sta); int iwl_mvm_mld_update_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif, struct ieee80211_sta *sta); int iwl_mvm_mld_rm_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif, struct ieee80211_sta *sta); int iwl_mvm_mld_rm_sta_id(struct iwl_mvm *mvm, u8 sta_id); int iwl_mvm_mld_update_sta_links(struct iwl_mvm *mvm, struct ieee80211_vif *vif, struct ieee80211_sta *sta, u16 old_links, u16 new_links); u32 iwl_mvm_sta_fw_id_mask(struct iwl_mvm *mvm, struct ieee80211_sta *sta, int filter_link_id); int iwl_mvm_mld_add_int_sta_with_queue(struct iwl_mvm *mvm, struct iwl_mvm_int_sta *sta, const u8 *addr, int link_id, u16 *queue, u8 tid, unsigned int *_wdg_timeout); /* Queues */ void iwl_mvm_mld_modify_all_sta_disable_tx(struct iwl_mvm *mvm, struct iwl_mvm_vif *mvmvif, bool disable); void iwl_mvm_mld_sta_modify_disable_tx(struct iwl_mvm *mvm, struct iwl_mvm_sta *mvm_sta, bool disable); void iwl_mvm_mld_sta_modify_disable_tx_ap(struct iwl_mvm *mvm, struct ieee80211_sta *sta, bool disable); #endif /* __sta_h__ */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1