Contributors: 14
Author Tokens Token Proportion Commits Commit Proportion
Mark Rutland 909 65.30% 17 48.57%
Anshuman Khandual 255 18.32% 2 5.71%
Jeremy Linton 167 12.00% 1 2.86%
Thomas Gleixner 10 0.72% 4 11.43%
Wei Huang 9 0.65% 1 2.86%
Ren Yu 9 0.65% 1 2.86%
Arvind Yadav 7 0.50% 1 2.86%
Lorenzo Pieralisi 7 0.50% 2 5.71%
Stephen Boyd 6 0.43% 1 2.86%
luanshi 4 0.29% 1 2.86%
Jamie Iles 3 0.22% 1 2.86%
Will Deacon 3 0.22% 1 2.86%
Hanjun Guo 2 0.14% 1 2.86%
Julien Thierry 1 0.07% 1 2.86%
Total 1392 35 


// SPDX-License-Identifier: GPL-2.0-only
/*
 * ACPI probing code for ARM performance counters.
 *
 * Copyright (C) 2017 ARM Ltd.
 */

#include <linux/acpi.h>
#include <linux/cpumask.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/irqdesc.h>
#include <linux/percpu.h>
#include <linux/perf/arm_pmu.h>

#include <asm/cpu.h>
#include <asm/cputype.h>

static DEFINE_PER_CPU(struct arm_pmu *, probed_pmus);
static DEFINE_PER_CPU(int, pmu_irqs);

static int arm_pmu_acpi_register_irq(int cpu)
{
	struct acpi_madt_generic_interrupt *gicc;
	int gsi, trigger;

	gicc = acpi_cpu_get_madt_gicc(cpu);

	gsi = gicc->performance_interrupt;

	/*
	 * Per the ACPI spec, the MADT cannot describe a PMU that doesn't
	 * have an interrupt. QEMU advertises this by using a GSI of zero,
	 * which is not known to be valid on any hardware despite being
	 * valid per the spec. Take the pragmatic approach and reject a
	 * GSI of zero for now.
	 */
	if (!gsi)
		return 0;

	if (gicc->flags & ACPI_MADT_PERFORMANCE_IRQ_MODE)
		trigger = ACPI_EDGE_SENSITIVE;
	else
		trigger = ACPI_LEVEL_SENSITIVE;

	/*
	 * Helpfully, the MADT GICC doesn't have a polarity flag for the
	 * "performance interrupt". Luckily, on compliant GICs the polarity is
	 * a fixed value in HW (for both SPIs and PPIs) that we cannot change
	 * from SW.
	 *
	 * Here we pass in ACPI_ACTIVE_HIGH to keep the core code happy. This
	 * may not match the real polarity, but that should not matter.
	 *
	 * Other interrupt controllers are not supported with ACPI.
	 */
	return acpi_register_gsi(NULL, gsi, trigger, ACPI_ACTIVE_HIGH);
}

static void arm_pmu_acpi_unregister_irq(int cpu)
{
	struct acpi_madt_generic_interrupt *gicc;
	int gsi;

	gicc = acpi_cpu_get_madt_gicc(cpu);

	gsi = gicc->performance_interrupt;
	if (gsi)
		acpi_unregister_gsi(gsi);
}

static int __maybe_unused
arm_acpi_register_pmu_device(struct platform_device *pdev, u8 len,
			     u16 (*parse_gsi)(struct acpi_madt_generic_interrupt *))
{
	int cpu, this_hetid, hetid, irq, ret;
	u16 this_gsi = 0, gsi = 0;

	/*
	 * Ensure that platform device must have IORESOURCE_IRQ
	 * resource to hold gsi interrupt.
	 */
	if (pdev->num_resources != 1)
		return -ENXIO;

	if (pdev->resource[0].flags != IORESOURCE_IRQ)
		return -ENXIO;

	/*
	 * Sanity check all the GICC tables for the same interrupt
	 * number. For now, only support homogeneous ACPI machines.
	 */
	for_each_possible_cpu(cpu) {
		struct acpi_madt_generic_interrupt *gicc;

		gicc = acpi_cpu_get_madt_gicc(cpu);
		if (gicc->header.length < len)
			return gsi ? -ENXIO : 0;

		this_gsi = parse_gsi(gicc);
		this_hetid = find_acpi_cpu_topology_hetero_id(cpu);
		if (!gsi) {
			hetid = this_hetid;
			gsi = this_gsi;
		} else if (hetid != this_hetid || gsi != this_gsi) {
			pr_warn("ACPI: %s: must be homogeneous\n", pdev->name);
			return -ENXIO;
		}
	}

	if (!this_gsi)
		return 0;

	irq = acpi_register_gsi(NULL, gsi, ACPI_LEVEL_SENSITIVE, ACPI_ACTIVE_HIGH);
	if (irq < 0) {
		pr_warn("ACPI: %s Unable to register interrupt: %d\n", pdev->name, gsi);
		return -ENXIO;
	}

	pdev->resource[0].start = irq;
	ret = platform_device_register(pdev);
	if (ret)
		acpi_unregister_gsi(gsi);

	return ret;
}

#if IS_ENABLED(CONFIG_ARM_SPE_PMU)
static struct resource spe_resources[] = {
	{
		/* irq */
		.flags          = IORESOURCE_IRQ,
	}
};

static struct platform_device spe_dev = {
	.name = ARMV8_SPE_PDEV_NAME,
	.id = -1,
	.resource = spe_resources,
	.num_resources = ARRAY_SIZE(spe_resources)
};

static u16 arm_spe_parse_gsi(struct acpi_madt_generic_interrupt *gicc)
{
	return gicc->spe_interrupt;
}

/*
 * For lack of a better place, hook the normal PMU MADT walk
 * and create a SPE device if we detect a recent MADT with
 * a homogeneous PPI mapping.
 */
static void arm_spe_acpi_register_device(void)
{
	int ret = arm_acpi_register_pmu_device(&spe_dev, ACPI_MADT_GICC_SPE,
					       arm_spe_parse_gsi);
	if (ret)
		pr_warn("ACPI: SPE: Unable to register device\n");
}
#else
static inline void arm_spe_acpi_register_device(void)
{
}
#endif /* CONFIG_ARM_SPE_PMU */

#if IS_ENABLED(CONFIG_CORESIGHT_TRBE)
static struct resource trbe_resources[] = {
	{
		/* irq */
		.flags          = IORESOURCE_IRQ,
	}
};

static struct platform_device trbe_dev = {
	.name = ARMV8_TRBE_PDEV_NAME,
	.id = -1,
	.resource = trbe_resources,
	.num_resources = ARRAY_SIZE(trbe_resources)
};

static u16 arm_trbe_parse_gsi(struct acpi_madt_generic_interrupt *gicc)
{
	return gicc->trbe_interrupt;
}

static void arm_trbe_acpi_register_device(void)
{
	int ret = arm_acpi_register_pmu_device(&trbe_dev, ACPI_MADT_GICC_TRBE,
					       arm_trbe_parse_gsi);
	if (ret)
		pr_warn("ACPI: TRBE: Unable to register device\n");
}
#else
static inline void arm_trbe_acpi_register_device(void)
{

}
#endif /* CONFIG_CORESIGHT_TRBE */

static int arm_pmu_acpi_parse_irqs(void)
{
	int irq, cpu, irq_cpu, err;

	for_each_possible_cpu(cpu) {
		irq = arm_pmu_acpi_register_irq(cpu);
		if (irq < 0) {
			err = irq;
			pr_warn("Unable to parse ACPI PMU IRQ for CPU%d: %d\n",
				cpu, err);
			goto out_err;
		} else if (irq == 0) {
			pr_warn("No ACPI PMU IRQ for CPU%d\n", cpu);
		}

		/*
		 * Log and request the IRQ so the core arm_pmu code can manage
		 * it. We'll have to sanity-check IRQs later when we associate
		 * them with their PMUs.
		 */
		per_cpu(pmu_irqs, cpu) = irq;
		err = armpmu_request_irq(irq, cpu);
		if (err)
			goto out_err;
	}

	return 0;

out_err:
	for_each_possible_cpu(cpu) {
		irq = per_cpu(pmu_irqs, cpu);
		if (!irq)
			continue;

		arm_pmu_acpi_unregister_irq(cpu);

		/*
		 * Blat all copies of the IRQ so that we only unregister the
		 * corresponding GSI once (e.g. when we have PPIs).
		 */
		for_each_possible_cpu(irq_cpu) {
			if (per_cpu(pmu_irqs, irq_cpu) == irq)
				per_cpu(pmu_irqs, irq_cpu) = 0;
		}
	}

	return err;
}

static struct arm_pmu *arm_pmu_acpi_find_pmu(void)
{
	unsigned long cpuid = read_cpuid_id();
	struct arm_pmu *pmu;
	int cpu;

	for_each_possible_cpu(cpu) {
		pmu = per_cpu(probed_pmus, cpu);
		if (!pmu || pmu->acpi_cpuid != cpuid)
			continue;

		return pmu;
	}

	return NULL;
}

/*
 * Check whether the new IRQ is compatible with those already associated with
 * the PMU (e.g. we don't have mismatched PPIs).
 */
static bool pmu_irq_matches(struct arm_pmu *pmu, int irq)
{
	struct pmu_hw_events __percpu *hw_events = pmu->hw_events;
	int cpu;

	if (!irq)
		return true;

	for_each_cpu(cpu, &pmu->supported_cpus) {
		int other_irq = per_cpu(hw_events->irq, cpu);
		if (!other_irq)
			continue;

		if (irq == other_irq)
			continue;
		if (!irq_is_percpu_devid(irq) && !irq_is_percpu_devid(other_irq))
			continue;

		pr_warn("mismatched PPIs detected\n");
		return false;
	}

	return true;
}

static void arm_pmu_acpi_associate_pmu_cpu(struct arm_pmu *pmu,
					   unsigned int cpu)
{
	int irq = per_cpu(pmu_irqs, cpu);

	per_cpu(probed_pmus, cpu) = pmu;

	if (pmu_irq_matches(pmu, irq)) {
		struct pmu_hw_events __percpu *hw_events;
		hw_events = pmu->hw_events;
		per_cpu(hw_events->irq, cpu) = irq;
	}

	cpumask_set_cpu(cpu, &pmu->supported_cpus);
}

/*
 * This must run before the common arm_pmu hotplug logic, so that we can
 * associate a CPU and its interrupt before the common code tries to manage the
 * affinity and so on.
 *
 * Note that hotplug events are serialized, so we cannot race with another CPU
 * coming up. The perf core won't open events while a hotplug event is in
 * progress.
 */
static int arm_pmu_acpi_cpu_starting(unsigned int cpu)
{
	struct arm_pmu *pmu;

	/* If we've already probed this CPU, we have nothing to do */
	if (per_cpu(probed_pmus, cpu))
		return 0;

	pmu = arm_pmu_acpi_find_pmu();
	if (!pmu) {
		pr_warn_ratelimited("Unable to associate CPU%d with a PMU\n",
				    cpu);
		return 0;
	}

	arm_pmu_acpi_associate_pmu_cpu(pmu, cpu);
	return 0;
}

static void arm_pmu_acpi_probe_matching_cpus(struct arm_pmu *pmu,
					     unsigned long cpuid)
{
	int cpu;

	for_each_online_cpu(cpu) {
		unsigned long cpu_cpuid = per_cpu(cpu_data, cpu).reg_midr;

		if (cpu_cpuid == cpuid)
			arm_pmu_acpi_associate_pmu_cpu(pmu, cpu);
	}
}

int arm_pmu_acpi_probe(armpmu_init_fn init_fn)
{
	int pmu_idx = 0;
	unsigned int cpu;
	int ret;

	ret = arm_pmu_acpi_parse_irqs();
	if (ret)
		return ret;

	ret = cpuhp_setup_state_nocalls(CPUHP_AP_PERF_ARM_ACPI_STARTING,
					"perf/arm/pmu_acpi:starting",
					arm_pmu_acpi_cpu_starting, NULL);
	if (ret)
		return ret;

	/*
	 * Initialise and register the set of PMUs which we know about right
	 * now. Ideally we'd do this in arm_pmu_acpi_cpu_starting() so that we
	 * could handle late hotplug, but this may lead to deadlock since we
	 * might try to register a hotplug notifier instance from within a
	 * hotplug notifier.
	 *
	 * There's also the problem of having access to the right init_fn,
	 * without tying this too deeply into the "real" PMU driver.
	 *
	 * For the moment, as with the platform/DT case, we need at least one
	 * of a PMU's CPUs to be online at probe time.
	 */
	for_each_online_cpu(cpu) {
		struct arm_pmu *pmu = per_cpu(probed_pmus, cpu);
		unsigned long cpuid;
		char *base_name;

		/* If we've already probed this CPU, we have nothing to do */
		if (pmu)
			continue;

		pmu = armpmu_alloc();
		if (!pmu) {
			pr_warn("Unable to allocate PMU for CPU%d\n",
				cpu);
			return -ENOMEM;
		}

		cpuid = per_cpu(cpu_data, cpu).reg_midr;
		pmu->acpi_cpuid = cpuid;

		arm_pmu_acpi_probe_matching_cpus(pmu, cpuid);

		ret = init_fn(pmu);
		if (ret == -ENODEV) {
			/* PMU not handled by this driver, or not present */
			continue;
		} else if (ret) {
			pr_warn("Unable to initialise PMU for CPU%d\n", cpu);
			return ret;
		}

		base_name = pmu->name;
		pmu->name = kasprintf(GFP_KERNEL, "%s_%d", base_name, pmu_idx++);
		if (!pmu->name) {
			pr_warn("Unable to allocate PMU name for CPU%d\n", cpu);
			return -ENOMEM;
		}

		ret = armpmu_register(pmu);
		if (ret) {
			pr_warn("Failed to register PMU for CPU%d\n", cpu);
			kfree(pmu->name);
			return ret;
		}
	}

	return ret;
}

static int arm_pmu_acpi_init(void)
{
	if (acpi_disabled)
		return 0;

	arm_spe_acpi_register_device();
	arm_trbe_acpi_register_device();

	return 0;
}
subsys_initcall(arm_pmu_acpi_init)