Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Suman Anna | 4177 | 80.10% | 16 | 45.71% |
Ohad Ben-Cohen | 1009 | 19.35% | 9 | 25.71% |
Juan Gutierrez | 8 | 0.15% | 1 | 2.86% |
Björn Andersson | 5 | 0.10% | 2 | 5.71% |
Wolfram Sang | 4 | 0.08% | 1 | 2.86% |
Peng Fan | 4 | 0.08% | 1 | 2.86% |
Xiang wangx | 3 | 0.06% | 1 | 2.86% |
Uwe Kleine-König | 2 | 0.04% | 1 | 2.86% |
Thomas Gleixner | 1 | 0.02% | 1 | 2.86% |
Bhumika Goyal | 1 | 0.02% | 1 | 2.86% |
Rob Herring | 1 | 0.02% | 1 | 2.86% |
Total | 5215 | 35 |
// SPDX-License-Identifier: GPL-2.0-only /* * OMAP Remote Processor driver * * Copyright (C) 2011-2020 Texas Instruments Incorporated - http://www.ti.com/ * Copyright (C) 2011 Google, Inc. * * Ohad Ben-Cohen <ohad@wizery.com> * Brian Swetland <swetland@google.com> * Fernando Guzman Lugo <fernando.lugo@ti.com> * Mark Grosen <mgrosen@ti.com> * Suman Anna <s-anna@ti.com> * Hari Kanigeri <h-kanigeri2@ti.com> */ #include <linux/kernel.h> #include <linux/module.h> #include <linux/clk.h> #include <linux/clk/ti.h> #include <linux/err.h> #include <linux/io.h> #include <linux/of.h> #include <linux/of_platform.h> #include <linux/of_reserved_mem.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> #include <linux/dma-mapping.h> #include <linux/interrupt.h> #include <linux/remoteproc.h> #include <linux/mailbox_client.h> #include <linux/omap-iommu.h> #include <linux/omap-mailbox.h> #include <linux/regmap.h> #include <linux/mfd/syscon.h> #include <linux/reset.h> #include <clocksource/timer-ti-dm.h> #include <linux/platform_data/dmtimer-omap.h> #include "omap_remoteproc.h" #include "remoteproc_internal.h" /* default auto-suspend delay (ms) */ #define DEFAULT_AUTOSUSPEND_DELAY 10000 /** * struct omap_rproc_boot_data - boot data structure for the DSP omap rprocs * @syscon: regmap handle for the system control configuration module * @boot_reg: boot register offset within the @syscon regmap * @boot_reg_shift: bit-field shift required for the boot address value in * @boot_reg */ struct omap_rproc_boot_data { struct regmap *syscon; unsigned int boot_reg; unsigned int boot_reg_shift; }; /** * struct omap_rproc_mem - internal memory structure * @cpu_addr: MPU virtual address of the memory region * @bus_addr: bus address used to access the memory region * @dev_addr: device address of the memory region from DSP view * @size: size of the memory region */ struct omap_rproc_mem { void __iomem *cpu_addr; phys_addr_t bus_addr; u32 dev_addr; size_t size; }; /** * struct omap_rproc_timer - data structure for a timer used by a omap rproc * @odt: timer pointer * @timer_ops: OMAP dmtimer ops for @odt timer * @irq: timer irq */ struct omap_rproc_timer { struct omap_dm_timer *odt; const struct omap_dm_timer_ops *timer_ops; int irq; }; /** * struct omap_rproc - omap remote processor state * @mbox: mailbox channel handle * @client: mailbox client to request the mailbox channel * @boot_data: boot data structure for setting processor boot address * @mem: internal memory regions data * @num_mems: number of internal memory regions * @num_timers: number of rproc timer(s) * @num_wd_timers: number of rproc watchdog timers * @timers: timer(s) info used by rproc * @autosuspend_delay: auto-suspend delay value to be used for runtime pm * @need_resume: if true a resume is needed in the system resume callback * @rproc: rproc handle * @reset: reset handle * @pm_comp: completion primitive to sync for suspend response * @fck: functional clock for the remoteproc * @suspend_acked: state machine flag to store the suspend request ack */ struct omap_rproc { struct mbox_chan *mbox; struct mbox_client client; struct omap_rproc_boot_data *boot_data; struct omap_rproc_mem *mem; int num_mems; int num_timers; int num_wd_timers; struct omap_rproc_timer *timers; int autosuspend_delay; bool need_resume; struct rproc *rproc; struct reset_control *reset; struct completion pm_comp; struct clk *fck; bool suspend_acked; }; /** * struct omap_rproc_mem_data - memory definitions for an omap remote processor * @name: name for this memory entry * @dev_addr: device address for the memory entry */ struct omap_rproc_mem_data { const char *name; const u32 dev_addr; }; /** * struct omap_rproc_dev_data - device data for the omap remote processor * @device_name: device name of the remote processor * @mems: memory definitions for this remote processor */ struct omap_rproc_dev_data { const char *device_name; const struct omap_rproc_mem_data *mems; }; /** * omap_rproc_request_timer() - request a timer for a remoteproc * @dev: device requesting the timer * @np: device node pointer to the desired timer * @timer: handle to a struct omap_rproc_timer to return the timer handle * * This helper function is used primarily to request a timer associated with * a remoteproc. The returned handle is stored in the .odt field of the * @timer structure passed in, and is used to invoke other timer specific * ops (like starting a timer either during device initialization or during * a resume operation, or for stopping/freeing a timer). * * Return: 0 on success, otherwise an appropriate failure */ static int omap_rproc_request_timer(struct device *dev, struct device_node *np, struct omap_rproc_timer *timer) { int ret; timer->odt = timer->timer_ops->request_by_node(np); if (!timer->odt) { dev_err(dev, "request for timer node %p failed\n", np); return -EBUSY; } ret = timer->timer_ops->set_source(timer->odt, OMAP_TIMER_SRC_SYS_CLK); if (ret) { dev_err(dev, "error setting OMAP_TIMER_SRC_SYS_CLK as source for timer node %p\n", np); timer->timer_ops->free(timer->odt); return ret; } /* clean counter, remoteproc code will set the value */ timer->timer_ops->set_load(timer->odt, 0); return 0; } /** * omap_rproc_start_timer() - start a timer for a remoteproc * @timer: handle to a OMAP rproc timer * * This helper function is used to start a timer associated with a remoteproc, * obtained using the request_timer ops. The helper function needs to be * invoked by the driver to start the timer (during device initialization) * or to just resume the timer. * * Return: 0 on success, otherwise a failure as returned by DMTimer ops */ static inline int omap_rproc_start_timer(struct omap_rproc_timer *timer) { return timer->timer_ops->start(timer->odt); } /** * omap_rproc_stop_timer() - stop a timer for a remoteproc * @timer: handle to a OMAP rproc timer * * This helper function is used to disable a timer associated with a * remoteproc, and needs to be called either during a device shutdown * or suspend operation. The separate helper function allows the driver * to just stop a timer without having to release the timer during a * suspend operation. * * Return: 0 on success, otherwise a failure as returned by DMTimer ops */ static inline int omap_rproc_stop_timer(struct omap_rproc_timer *timer) { return timer->timer_ops->stop(timer->odt); } /** * omap_rproc_release_timer() - release a timer for a remoteproc * @timer: handle to a OMAP rproc timer * * This helper function is used primarily to release a timer associated * with a remoteproc. The dmtimer will be available for other clients to * use once released. * * Return: 0 on success, otherwise a failure as returned by DMTimer ops */ static inline int omap_rproc_release_timer(struct omap_rproc_timer *timer) { return timer->timer_ops->free(timer->odt); } /** * omap_rproc_get_timer_irq() - get the irq for a timer * @timer: handle to a OMAP rproc timer * * This function is used to get the irq associated with a watchdog timer. The * function is called by the OMAP remoteproc driver to register a interrupt * handler to handle watchdog events on the remote processor. * * Return: irq id on success, otherwise a failure as returned by DMTimer ops */ static inline int omap_rproc_get_timer_irq(struct omap_rproc_timer *timer) { return timer->timer_ops->get_irq(timer->odt); } /** * omap_rproc_ack_timer_irq() - acknowledge a timer irq * @timer: handle to a OMAP rproc timer * * This function is used to clear the irq associated with a watchdog timer. * The function is called by the OMAP remoteproc upon a watchdog event on the * remote processor to clear the interrupt status of the watchdog timer. */ static inline void omap_rproc_ack_timer_irq(struct omap_rproc_timer *timer) { timer->timer_ops->write_status(timer->odt, OMAP_TIMER_INT_OVERFLOW); } /** * omap_rproc_watchdog_isr() - Watchdog ISR handler for remoteproc device * @irq: IRQ number associated with a watchdog timer * @data: IRQ handler data * * This ISR routine executes the required necessary low-level code to * acknowledge a watchdog timer interrupt. There can be multiple watchdog * timers associated with a rproc (like IPUs which have 2 watchdog timers, * one per Cortex M3/M4 core), so a lookup has to be performed to identify * the timer to acknowledge its interrupt. * * The function also invokes rproc_report_crash to report the watchdog event * to the remoteproc driver core, to trigger a recovery. * * Return: IRQ_HANDLED on success, otherwise IRQ_NONE */ static irqreturn_t omap_rproc_watchdog_isr(int irq, void *data) { struct rproc *rproc = data; struct omap_rproc *oproc = rproc->priv; struct device *dev = rproc->dev.parent; struct omap_rproc_timer *timers = oproc->timers; struct omap_rproc_timer *wd_timer = NULL; int num_timers = oproc->num_timers + oproc->num_wd_timers; int i; for (i = oproc->num_timers; i < num_timers; i++) { if (timers[i].irq > 0 && irq == timers[i].irq) { wd_timer = &timers[i]; break; } } if (!wd_timer) { dev_err(dev, "invalid timer\n"); return IRQ_NONE; } omap_rproc_ack_timer_irq(wd_timer); rproc_report_crash(rproc, RPROC_WATCHDOG); return IRQ_HANDLED; } /** * omap_rproc_enable_timers() - enable the timers for a remoteproc * @rproc: handle of a remote processor * @configure: boolean flag used to acquire and configure the timer handle * * This function is used primarily to enable the timers associated with * a remoteproc. The configure flag is provided to allow the driver * to either acquire and start a timer (during device initialization) or * to just start a timer (during a resume operation). * * Return: 0 on success, otherwise an appropriate failure */ static int omap_rproc_enable_timers(struct rproc *rproc, bool configure) { int i; int ret = 0; struct platform_device *tpdev; struct dmtimer_platform_data *tpdata; const struct omap_dm_timer_ops *timer_ops; struct omap_rproc *oproc = rproc->priv; struct omap_rproc_timer *timers = oproc->timers; struct device *dev = rproc->dev.parent; struct device_node *np = NULL; int num_timers = oproc->num_timers + oproc->num_wd_timers; if (!num_timers) return 0; if (!configure) goto start_timers; for (i = 0; i < num_timers; i++) { if (i < oproc->num_timers) np = of_parse_phandle(dev->of_node, "ti,timers", i); else np = of_parse_phandle(dev->of_node, "ti,watchdog-timers", (i - oproc->num_timers)); if (!np) { ret = -ENXIO; dev_err(dev, "device node lookup for timer at index %d failed: %d\n", i < oproc->num_timers ? i : i - oproc->num_timers, ret); goto free_timers; } tpdev = of_find_device_by_node(np); if (!tpdev) { ret = -ENODEV; dev_err(dev, "could not get timer platform device\n"); goto put_node; } tpdata = dev_get_platdata(&tpdev->dev); put_device(&tpdev->dev); if (!tpdata) { ret = -EINVAL; dev_err(dev, "dmtimer pdata structure NULL\n"); goto put_node; } timer_ops = tpdata->timer_ops; if (!timer_ops || !timer_ops->request_by_node || !timer_ops->set_source || !timer_ops->set_load || !timer_ops->free || !timer_ops->start || !timer_ops->stop || !timer_ops->get_irq || !timer_ops->write_status) { ret = -EINVAL; dev_err(dev, "device does not have required timer ops\n"); goto put_node; } timers[i].irq = -1; timers[i].timer_ops = timer_ops; ret = omap_rproc_request_timer(dev, np, &timers[i]); if (ret) { dev_err(dev, "request for timer %p failed: %d\n", np, ret); goto put_node; } of_node_put(np); if (i >= oproc->num_timers) { timers[i].irq = omap_rproc_get_timer_irq(&timers[i]); if (timers[i].irq < 0) { dev_err(dev, "get_irq for timer %p failed: %d\n", np, timers[i].irq); ret = -EBUSY; goto free_timers; } ret = request_irq(timers[i].irq, omap_rproc_watchdog_isr, IRQF_SHARED, "rproc-wdt", rproc); if (ret) { dev_err(dev, "error requesting irq for timer %p\n", np); omap_rproc_release_timer(&timers[i]); timers[i].odt = NULL; timers[i].timer_ops = NULL; timers[i].irq = -1; goto free_timers; } } } start_timers: for (i = 0; i < num_timers; i++) { ret = omap_rproc_start_timer(&timers[i]); if (ret) { dev_err(dev, "start timer %p failed failed: %d\n", np, ret); break; } } if (ret) { while (i >= 0) { omap_rproc_stop_timer(&timers[i]); i--; } goto put_node; } return 0; put_node: if (configure) of_node_put(np); free_timers: while (i--) { if (i >= oproc->num_timers) free_irq(timers[i].irq, rproc); omap_rproc_release_timer(&timers[i]); timers[i].odt = NULL; timers[i].timer_ops = NULL; timers[i].irq = -1; } return ret; } /** * omap_rproc_disable_timers() - disable the timers for a remoteproc * @rproc: handle of a remote processor * @configure: boolean flag used to release the timer handle * * This function is used primarily to disable the timers associated with * a remoteproc. The configure flag is provided to allow the driver * to either stop and release a timer (during device shutdown) or to just * stop a timer (during a suspend operation). * * Return: 0 on success or no timers */ static int omap_rproc_disable_timers(struct rproc *rproc, bool configure) { int i; struct omap_rproc *oproc = rproc->priv; struct omap_rproc_timer *timers = oproc->timers; int num_timers = oproc->num_timers + oproc->num_wd_timers; if (!num_timers) return 0; for (i = 0; i < num_timers; i++) { omap_rproc_stop_timer(&timers[i]); if (configure) { if (i >= oproc->num_timers) free_irq(timers[i].irq, rproc); omap_rproc_release_timer(&timers[i]); timers[i].odt = NULL; timers[i].timer_ops = NULL; timers[i].irq = -1; } } return 0; } /** * omap_rproc_mbox_callback() - inbound mailbox message handler * @client: mailbox client pointer used for requesting the mailbox channel * @data: mailbox payload * * This handler is invoked by omap's mailbox driver whenever a mailbox * message is received. Usually, the mailbox payload simply contains * the index of the virtqueue that is kicked by the remote processor, * and we let remoteproc core handle it. * * In addition to virtqueue indices, we also have some out-of-band values * that indicates different events. Those values are deliberately very * big so they don't coincide with virtqueue indices. */ static void omap_rproc_mbox_callback(struct mbox_client *client, void *data) { struct omap_rproc *oproc = container_of(client, struct omap_rproc, client); struct device *dev = oproc->rproc->dev.parent; const char *name = oproc->rproc->name; u32 msg = (u32)data; dev_dbg(dev, "mbox msg: 0x%x\n", msg); switch (msg) { case RP_MBOX_CRASH: /* * remoteproc detected an exception, notify the rproc core. * The remoteproc core will handle the recovery. */ dev_err(dev, "omap rproc %s crashed\n", name); rproc_report_crash(oproc->rproc, RPROC_FATAL_ERROR); break; case RP_MBOX_ECHO_REPLY: dev_info(dev, "received echo reply from %s\n", name); break; case RP_MBOX_SUSPEND_ACK: case RP_MBOX_SUSPEND_CANCEL: oproc->suspend_acked = msg == RP_MBOX_SUSPEND_ACK; complete(&oproc->pm_comp); break; default: if (msg >= RP_MBOX_READY && msg < RP_MBOX_END_MSG) return; if (msg > oproc->rproc->max_notifyid) { dev_dbg(dev, "dropping unknown message 0x%x", msg); return; } /* msg contains the index of the triggered vring */ if (rproc_vq_interrupt(oproc->rproc, msg) == IRQ_NONE) dev_dbg(dev, "no message was found in vqid %d\n", msg); } } /* kick a virtqueue */ static void omap_rproc_kick(struct rproc *rproc, int vqid) { struct omap_rproc *oproc = rproc->priv; struct device *dev = rproc->dev.parent; int ret; /* wake up the rproc before kicking it */ ret = pm_runtime_get_sync(dev); if (WARN_ON(ret < 0)) { dev_err(dev, "pm_runtime_get_sync() failed during kick, ret = %d\n", ret); pm_runtime_put_noidle(dev); return; } /* send the index of the triggered virtqueue in the mailbox payload */ ret = mbox_send_message(oproc->mbox, (void *)vqid); if (ret < 0) dev_err(dev, "failed to send mailbox message, status = %d\n", ret); pm_runtime_mark_last_busy(dev); pm_runtime_put_autosuspend(dev); } /** * omap_rproc_write_dsp_boot_addr() - set boot address for DSP remote processor * @rproc: handle of a remote processor * * Set boot address for a supported DSP remote processor. * * Return: 0 on success, or -EINVAL if boot address is not aligned properly */ static int omap_rproc_write_dsp_boot_addr(struct rproc *rproc) { struct device *dev = rproc->dev.parent; struct omap_rproc *oproc = rproc->priv; struct omap_rproc_boot_data *bdata = oproc->boot_data; u32 offset = bdata->boot_reg; u32 value; u32 mask; if (rproc->bootaddr & (SZ_1K - 1)) { dev_err(dev, "invalid boot address 0x%llx, must be aligned on a 1KB boundary\n", rproc->bootaddr); return -EINVAL; } value = rproc->bootaddr >> bdata->boot_reg_shift; mask = ~(SZ_1K - 1) >> bdata->boot_reg_shift; return regmap_update_bits(bdata->syscon, offset, mask, value); } /* * Power up the remote processor. * * This function will be invoked only after the firmware for this rproc * was loaded, parsed successfully, and all of its resource requirements * were met. */ static int omap_rproc_start(struct rproc *rproc) { struct omap_rproc *oproc = rproc->priv; struct device *dev = rproc->dev.parent; int ret; struct mbox_client *client = &oproc->client; if (oproc->boot_data) { ret = omap_rproc_write_dsp_boot_addr(rproc); if (ret) return ret; } client->dev = dev; client->tx_done = NULL; client->rx_callback = omap_rproc_mbox_callback; client->tx_block = false; client->knows_txdone = false; oproc->mbox = mbox_request_channel(client, 0); if (IS_ERR(oproc->mbox)) { ret = -EBUSY; dev_err(dev, "mbox_request_channel failed: %ld\n", PTR_ERR(oproc->mbox)); return ret; } /* * Ping the remote processor. this is only for sanity-sake; * there is no functional effect whatsoever. * * Note that the reply will _not_ arrive immediately: this message * will wait in the mailbox fifo until the remote processor is booted. */ ret = mbox_send_message(oproc->mbox, (void *)RP_MBOX_ECHO_REQUEST); if (ret < 0) { dev_err(dev, "mbox_send_message failed: %d\n", ret); goto put_mbox; } ret = omap_rproc_enable_timers(rproc, true); if (ret) { dev_err(dev, "omap_rproc_enable_timers failed: %d\n", ret); goto put_mbox; } ret = reset_control_deassert(oproc->reset); if (ret) { dev_err(dev, "reset control deassert failed: %d\n", ret); goto disable_timers; } /* * remote processor is up, so update the runtime pm status and * enable the auto-suspend. The device usage count is incremented * manually for balancing it for auto-suspend */ pm_runtime_set_active(dev); pm_runtime_use_autosuspend(dev); pm_runtime_get_noresume(dev); pm_runtime_enable(dev); pm_runtime_mark_last_busy(dev); pm_runtime_put_autosuspend(dev); return 0; disable_timers: omap_rproc_disable_timers(rproc, true); put_mbox: mbox_free_channel(oproc->mbox); return ret; } /* power off the remote processor */ static int omap_rproc_stop(struct rproc *rproc) { struct device *dev = rproc->dev.parent; struct omap_rproc *oproc = rproc->priv; int ret; /* * cancel any possible scheduled runtime suspend by incrementing * the device usage count, and resuming the device. The remoteproc * also needs to be woken up if suspended, to avoid the remoteproc * OS to continue to remember any context that it has saved, and * avoid potential issues in misindentifying a subsequent device * reboot as a power restore boot */ ret = pm_runtime_get_sync(dev); if (ret < 0) { pm_runtime_put_noidle(dev); return ret; } ret = reset_control_assert(oproc->reset); if (ret) goto out; ret = omap_rproc_disable_timers(rproc, true); if (ret) goto enable_device; mbox_free_channel(oproc->mbox); /* * update the runtime pm states and status now that the remoteproc * has stopped */ pm_runtime_disable(dev); pm_runtime_dont_use_autosuspend(dev); pm_runtime_put_noidle(dev); pm_runtime_set_suspended(dev); return 0; enable_device: reset_control_deassert(oproc->reset); out: /* schedule the next auto-suspend */ pm_runtime_mark_last_busy(dev); pm_runtime_put_autosuspend(dev); return ret; } /** * omap_rproc_da_to_va() - internal memory translation helper * @rproc: remote processor to apply the address translation for * @da: device address to translate * @len: length of the memory buffer * * Custom function implementing the rproc .da_to_va ops to provide address * translation (device address to kernel virtual address) for internal RAMs * present in a DSP or IPU device). The translated addresses can be used * either by the remoteproc core for loading, or by any rpmsg bus drivers. * * Return: translated virtual address in kernel memory space on success, * or NULL on failure. */ static void *omap_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len, bool *is_iomem) { struct omap_rproc *oproc = rproc->priv; int i; u32 offset; if (len <= 0) return NULL; if (!oproc->num_mems) return NULL; for (i = 0; i < oproc->num_mems; i++) { if (da >= oproc->mem[i].dev_addr && da + len <= oproc->mem[i].dev_addr + oproc->mem[i].size) { offset = da - oproc->mem[i].dev_addr; /* __force to make sparse happy with type conversion */ return (__force void *)(oproc->mem[i].cpu_addr + offset); } } return NULL; } static const struct rproc_ops omap_rproc_ops = { .start = omap_rproc_start, .stop = omap_rproc_stop, .kick = omap_rproc_kick, .da_to_va = omap_rproc_da_to_va, }; #ifdef CONFIG_PM static bool _is_rproc_in_standby(struct omap_rproc *oproc) { return ti_clk_is_in_standby(oproc->fck); } /* 1 sec is long enough time to let the remoteproc side suspend the device */ #define DEF_SUSPEND_TIMEOUT 1000 static int _omap_rproc_suspend(struct rproc *rproc, bool auto_suspend) { struct device *dev = rproc->dev.parent; struct omap_rproc *oproc = rproc->priv; unsigned long to = msecs_to_jiffies(DEF_SUSPEND_TIMEOUT); unsigned long ta = jiffies + to; u32 suspend_msg = auto_suspend ? RP_MBOX_SUSPEND_AUTO : RP_MBOX_SUSPEND_SYSTEM; int ret; reinit_completion(&oproc->pm_comp); oproc->suspend_acked = false; ret = mbox_send_message(oproc->mbox, (void *)suspend_msg); if (ret < 0) { dev_err(dev, "PM mbox_send_message failed: %d\n", ret); return ret; } ret = wait_for_completion_timeout(&oproc->pm_comp, to); if (!oproc->suspend_acked) return -EBUSY; /* * The remoteproc side is returning the ACK message before saving the * context, because the context saving is performed within a SYS/BIOS * function, and it cannot have any inter-dependencies against the IPC * layer. Also, as the SYS/BIOS needs to preserve properly the processor * register set, sending this ACK or signalling the completion of the * context save through a shared memory variable can never be the * absolute last thing to be executed on the remoteproc side, and the * MPU cannot use the ACK message as a sync point to put the remoteproc * into reset. The only way to ensure that the remote processor has * completed saving the context is to check that the module has reached * STANDBY state (after saving the context, the SYS/BIOS executes the * appropriate target-specific WFI instruction causing the module to * enter STANDBY). */ while (!_is_rproc_in_standby(oproc)) { if (time_after(jiffies, ta)) return -ETIME; schedule(); } ret = reset_control_assert(oproc->reset); if (ret) { dev_err(dev, "reset assert during suspend failed %d\n", ret); return ret; } ret = omap_rproc_disable_timers(rproc, false); if (ret) { dev_err(dev, "disabling timers during suspend failed %d\n", ret); goto enable_device; } /* * IOMMUs would have to be disabled specifically for runtime suspend. * They are handled automatically through System PM callbacks for * regular system suspend */ if (auto_suspend) { ret = omap_iommu_domain_deactivate(rproc->domain); if (ret) { dev_err(dev, "iommu domain deactivate failed %d\n", ret); goto enable_timers; } } return 0; enable_timers: /* ignore errors on re-enabling code */ omap_rproc_enable_timers(rproc, false); enable_device: reset_control_deassert(oproc->reset); return ret; } static int _omap_rproc_resume(struct rproc *rproc, bool auto_suspend) { struct device *dev = rproc->dev.parent; struct omap_rproc *oproc = rproc->priv; int ret; /* * IOMMUs would have to be enabled specifically for runtime resume. * They would have been already enabled automatically through System * PM callbacks for regular system resume */ if (auto_suspend) { ret = omap_iommu_domain_activate(rproc->domain); if (ret) { dev_err(dev, "omap_iommu activate failed %d\n", ret); goto out; } } /* boot address could be lost after suspend, so restore it */ if (oproc->boot_data) { ret = omap_rproc_write_dsp_boot_addr(rproc); if (ret) { dev_err(dev, "boot address restore failed %d\n", ret); goto suspend_iommu; } } ret = omap_rproc_enable_timers(rproc, false); if (ret) { dev_err(dev, "enabling timers during resume failed %d\n", ret); goto suspend_iommu; } ret = reset_control_deassert(oproc->reset); if (ret) { dev_err(dev, "reset deassert during resume failed %d\n", ret); goto disable_timers; } return 0; disable_timers: omap_rproc_disable_timers(rproc, false); suspend_iommu: if (auto_suspend) omap_iommu_domain_deactivate(rproc->domain); out: return ret; } static int __maybe_unused omap_rproc_suspend(struct device *dev) { struct rproc *rproc = dev_get_drvdata(dev); struct omap_rproc *oproc = rproc->priv; int ret = 0; mutex_lock(&rproc->lock); if (rproc->state == RPROC_OFFLINE) goto out; if (rproc->state == RPROC_SUSPENDED) goto out; if (rproc->state != RPROC_RUNNING) { ret = -EBUSY; goto out; } ret = _omap_rproc_suspend(rproc, false); if (ret) { dev_err(dev, "suspend failed %d\n", ret); goto out; } /* * remoteproc is running at the time of system suspend, so remember * it so as to wake it up during system resume */ oproc->need_resume = true; rproc->state = RPROC_SUSPENDED; out: mutex_unlock(&rproc->lock); return ret; } static int __maybe_unused omap_rproc_resume(struct device *dev) { struct rproc *rproc = dev_get_drvdata(dev); struct omap_rproc *oproc = rproc->priv; int ret = 0; mutex_lock(&rproc->lock); if (rproc->state == RPROC_OFFLINE) goto out; if (rproc->state != RPROC_SUSPENDED) { ret = -EBUSY; goto out; } /* * remoteproc was auto-suspended at the time of system suspend, * so no need to wake-up the processor (leave it in suspended * state, will be woken up during a subsequent runtime_resume) */ if (!oproc->need_resume) goto out; ret = _omap_rproc_resume(rproc, false); if (ret) { dev_err(dev, "resume failed %d\n", ret); goto out; } oproc->need_resume = false; rproc->state = RPROC_RUNNING; pm_runtime_mark_last_busy(dev); out: mutex_unlock(&rproc->lock); return ret; } static int omap_rproc_runtime_suspend(struct device *dev) { struct rproc *rproc = dev_get_drvdata(dev); struct omap_rproc *oproc = rproc->priv; int ret; mutex_lock(&rproc->lock); if (rproc->state == RPROC_CRASHED) { dev_dbg(dev, "rproc cannot be runtime suspended when crashed!\n"); ret = -EBUSY; goto out; } if (WARN_ON(rproc->state != RPROC_RUNNING)) { dev_err(dev, "rproc cannot be runtime suspended when not running!\n"); ret = -EBUSY; goto out; } /* * do not even attempt suspend if the remote processor is not * idled for runtime auto-suspend */ if (!_is_rproc_in_standby(oproc)) { ret = -EBUSY; goto abort; } ret = _omap_rproc_suspend(rproc, true); if (ret) goto abort; rproc->state = RPROC_SUSPENDED; mutex_unlock(&rproc->lock); return 0; abort: pm_runtime_mark_last_busy(dev); out: mutex_unlock(&rproc->lock); return ret; } static int omap_rproc_runtime_resume(struct device *dev) { struct rproc *rproc = dev_get_drvdata(dev); int ret; mutex_lock(&rproc->lock); if (WARN_ON(rproc->state != RPROC_SUSPENDED)) { dev_err(dev, "rproc cannot be runtime resumed if not suspended! state=%d\n", rproc->state); ret = -EBUSY; goto out; } ret = _omap_rproc_resume(rproc, true); if (ret) { dev_err(dev, "runtime resume failed %d\n", ret); goto out; } rproc->state = RPROC_RUNNING; out: mutex_unlock(&rproc->lock); return ret; } #endif /* CONFIG_PM */ static const struct omap_rproc_mem_data ipu_mems[] = { { .name = "l2ram", .dev_addr = 0x20000000 }, { }, }; static const struct omap_rproc_mem_data dra7_dsp_mems[] = { { .name = "l2ram", .dev_addr = 0x800000 }, { .name = "l1pram", .dev_addr = 0xe00000 }, { .name = "l1dram", .dev_addr = 0xf00000 }, { }, }; static const struct omap_rproc_dev_data omap4_dsp_dev_data = { .device_name = "dsp", }; static const struct omap_rproc_dev_data omap4_ipu_dev_data = { .device_name = "ipu", .mems = ipu_mems, }; static const struct omap_rproc_dev_data omap5_dsp_dev_data = { .device_name = "dsp", }; static const struct omap_rproc_dev_data omap5_ipu_dev_data = { .device_name = "ipu", .mems = ipu_mems, }; static const struct omap_rproc_dev_data dra7_dsp_dev_data = { .device_name = "dsp", .mems = dra7_dsp_mems, }; static const struct omap_rproc_dev_data dra7_ipu_dev_data = { .device_name = "ipu", .mems = ipu_mems, }; static const struct of_device_id omap_rproc_of_match[] = { { .compatible = "ti,omap4-dsp", .data = &omap4_dsp_dev_data, }, { .compatible = "ti,omap4-ipu", .data = &omap4_ipu_dev_data, }, { .compatible = "ti,omap5-dsp", .data = &omap5_dsp_dev_data, }, { .compatible = "ti,omap5-ipu", .data = &omap5_ipu_dev_data, }, { .compatible = "ti,dra7-dsp", .data = &dra7_dsp_dev_data, }, { .compatible = "ti,dra7-ipu", .data = &dra7_ipu_dev_data, }, { /* end */ }, }; MODULE_DEVICE_TABLE(of, omap_rproc_of_match); static const char *omap_rproc_get_firmware(struct platform_device *pdev) { const char *fw_name; int ret; ret = of_property_read_string(pdev->dev.of_node, "firmware-name", &fw_name); if (ret) return ERR_PTR(ret); return fw_name; } static int omap_rproc_get_boot_data(struct platform_device *pdev, struct rproc *rproc) { struct device_node *np = pdev->dev.of_node; struct omap_rproc *oproc = rproc->priv; const struct omap_rproc_dev_data *data; int ret; data = of_device_get_match_data(&pdev->dev); if (!data) return -ENODEV; if (!of_property_read_bool(np, "ti,bootreg")) return 0; oproc->boot_data = devm_kzalloc(&pdev->dev, sizeof(*oproc->boot_data), GFP_KERNEL); if (!oproc->boot_data) return -ENOMEM; oproc->boot_data->syscon = syscon_regmap_lookup_by_phandle(np, "ti,bootreg"); if (IS_ERR(oproc->boot_data->syscon)) { ret = PTR_ERR(oproc->boot_data->syscon); return ret; } if (of_property_read_u32_index(np, "ti,bootreg", 1, &oproc->boot_data->boot_reg)) { dev_err(&pdev->dev, "couldn't get the boot register\n"); return -EINVAL; } of_property_read_u32_index(np, "ti,bootreg", 2, &oproc->boot_data->boot_reg_shift); return 0; } static int omap_rproc_of_get_internal_memories(struct platform_device *pdev, struct rproc *rproc) { struct omap_rproc *oproc = rproc->priv; struct device *dev = &pdev->dev; const struct omap_rproc_dev_data *data; struct resource *res; int num_mems; int i; data = of_device_get_match_data(dev); if (!data) return -ENODEV; if (!data->mems) return 0; num_mems = of_property_count_elems_of_size(dev->of_node, "reg", sizeof(u32)) / 2; oproc->mem = devm_kcalloc(dev, num_mems, sizeof(*oproc->mem), GFP_KERNEL); if (!oproc->mem) return -ENOMEM; for (i = 0; data->mems[i].name; i++) { res = platform_get_resource_byname(pdev, IORESOURCE_MEM, data->mems[i].name); if (!res) { dev_err(dev, "no memory defined for %s\n", data->mems[i].name); return -ENOMEM; } oproc->mem[i].cpu_addr = devm_ioremap_resource(dev, res); if (IS_ERR(oproc->mem[i].cpu_addr)) { dev_err(dev, "failed to parse and map %s memory\n", data->mems[i].name); return PTR_ERR(oproc->mem[i].cpu_addr); } oproc->mem[i].bus_addr = res->start; oproc->mem[i].dev_addr = data->mems[i].dev_addr; oproc->mem[i].size = resource_size(res); dev_dbg(dev, "memory %8s: bus addr %pa size 0x%x va %pK da 0x%x\n", data->mems[i].name, &oproc->mem[i].bus_addr, oproc->mem[i].size, oproc->mem[i].cpu_addr, oproc->mem[i].dev_addr); } oproc->num_mems = num_mems; return 0; } #ifdef CONFIG_OMAP_REMOTEPROC_WATCHDOG static int omap_rproc_count_wdog_timers(struct device *dev) { struct device_node *np = dev->of_node; int ret; ret = of_count_phandle_with_args(np, "ti,watchdog-timers", NULL); if (ret <= 0) { dev_dbg(dev, "device does not have watchdog timers, status = %d\n", ret); ret = 0; } return ret; } #else static int omap_rproc_count_wdog_timers(struct device *dev) { return 0; } #endif static int omap_rproc_of_get_timers(struct platform_device *pdev, struct rproc *rproc) { struct device_node *np = pdev->dev.of_node; struct omap_rproc *oproc = rproc->priv; struct device *dev = &pdev->dev; int num_timers; /* * Timer nodes are directly used in client nodes as phandles, so * retrieve the count using appropriate size */ oproc->num_timers = of_count_phandle_with_args(np, "ti,timers", NULL); if (oproc->num_timers <= 0) { dev_dbg(dev, "device does not have timers, status = %d\n", oproc->num_timers); oproc->num_timers = 0; } oproc->num_wd_timers = omap_rproc_count_wdog_timers(dev); num_timers = oproc->num_timers + oproc->num_wd_timers; if (num_timers) { oproc->timers = devm_kcalloc(dev, num_timers, sizeof(*oproc->timers), GFP_KERNEL); if (!oproc->timers) return -ENOMEM; dev_dbg(dev, "device has %d tick timers and %d watchdog timers\n", oproc->num_timers, oproc->num_wd_timers); } return 0; } static int omap_rproc_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; struct omap_rproc *oproc; struct rproc *rproc; const char *firmware; int ret; struct reset_control *reset; if (!np) { dev_err(&pdev->dev, "only DT-based devices are supported\n"); return -ENODEV; } reset = devm_reset_control_array_get_exclusive(&pdev->dev); if (IS_ERR(reset)) return PTR_ERR(reset); firmware = omap_rproc_get_firmware(pdev); if (IS_ERR(firmware)) return PTR_ERR(firmware); ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); if (ret) { dev_err(&pdev->dev, "dma_set_coherent_mask: %d\n", ret); return ret; } rproc = rproc_alloc(&pdev->dev, dev_name(&pdev->dev), &omap_rproc_ops, firmware, sizeof(*oproc)); if (!rproc) return -ENOMEM; oproc = rproc->priv; oproc->rproc = rproc; oproc->reset = reset; /* All existing OMAP IPU and DSP processors have an MMU */ rproc->has_iommu = true; ret = omap_rproc_of_get_internal_memories(pdev, rproc); if (ret) goto free_rproc; ret = omap_rproc_get_boot_data(pdev, rproc); if (ret) goto free_rproc; ret = omap_rproc_of_get_timers(pdev, rproc); if (ret) goto free_rproc; init_completion(&oproc->pm_comp); oproc->autosuspend_delay = DEFAULT_AUTOSUSPEND_DELAY; of_property_read_u32(pdev->dev.of_node, "ti,autosuspend-delay-ms", &oproc->autosuspend_delay); pm_runtime_set_autosuspend_delay(&pdev->dev, oproc->autosuspend_delay); oproc->fck = devm_clk_get(&pdev->dev, 0); if (IS_ERR(oproc->fck)) { ret = PTR_ERR(oproc->fck); goto free_rproc; } ret = of_reserved_mem_device_init(&pdev->dev); if (ret) { dev_warn(&pdev->dev, "device does not have specific CMA pool.\n"); dev_warn(&pdev->dev, "Typically this should be provided,\n"); dev_warn(&pdev->dev, "only omit if you know what you are doing.\n"); } platform_set_drvdata(pdev, rproc); ret = rproc_add(rproc); if (ret) goto release_mem; return 0; release_mem: of_reserved_mem_device_release(&pdev->dev); free_rproc: rproc_free(rproc); return ret; } static void omap_rproc_remove(struct platform_device *pdev) { struct rproc *rproc = platform_get_drvdata(pdev); rproc_del(rproc); rproc_free(rproc); of_reserved_mem_device_release(&pdev->dev); } static const struct dev_pm_ops omap_rproc_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(omap_rproc_suspend, omap_rproc_resume) SET_RUNTIME_PM_OPS(omap_rproc_runtime_suspend, omap_rproc_runtime_resume, NULL) }; static struct platform_driver omap_rproc_driver = { .probe = omap_rproc_probe, .remove_new = omap_rproc_remove, .driver = { .name = "omap-rproc", .pm = &omap_rproc_pm_ops, .of_match_table = omap_rproc_of_match, }, }; module_platform_driver(omap_rproc_driver); MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("OMAP Remote Processor control driver");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1