| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Andrew Vasquez | 3266 | 56.64% | 24 | 25.00% |
| Joe Carnuccio | 523 | 9.07% | 15 | 15.62% |
| Bart Van Assche | 463 | 8.03% | 8 | 8.33% |
| Quinn Tran | 300 | 5.20% | 10 | 10.42% |
| Harihara Kadayam | 244 | 4.23% | 1 | 1.04% |
| Sarang Radke | 194 | 3.36% | 1 | 1.04% |
| James Bottomley | 148 | 2.57% | 2 | 2.08% |
| Seokmann Ju | 118 | 2.05% | 2 | 2.08% |
| Saurav Kashyap | 75 | 1.30% | 1 | 1.04% |
| Bikash Hazarika | 65 | 1.13% | 1 | 1.04% |
| Arun Easi | 64 | 1.11% | 4 | 4.17% |
| Giridhar Malavali | 61 | 1.06% | 2 | 2.08% |
| Duane Grigsby | 60 | 1.04% | 3 | 3.12% |
| Sawan Chandak | 44 | 0.76% | 3 | 3.12% |
| Michael Hernandez | 41 | 0.71% | 3 | 3.12% |
| Santosh Vernekar | 24 | 0.42% | 2 | 2.08% |
| Chad Dupuis | 16 | 0.28% | 1 | 1.04% |
| Anirban Chakraborty | 15 | 0.26% | 1 | 1.04% |
| Anil Gurumurthy | 12 | 0.21% | 1 | 1.04% |
| Shyam Sundar | 9 | 0.16% | 3 | 3.12% |
| Atul Deshmukh | 8 | 0.14% | 1 | 1.04% |
| Himanshu Madhani | 5 | 0.09% | 1 | 1.04% |
| Lalit Chandivade | 4 | 0.07% | 1 | 1.04% |
| Masanari Iida | 2 | 0.03% | 1 | 1.04% |
| Thomas Gleixner | 2 | 0.03% | 1 | 1.04% |
| Harish Zunjarrao | 1 | 0.02% | 1 | 1.04% |
| Gustavo A. R. Silva | 1 | 0.02% | 1 | 1.04% |
| Ravi Anand | 1 | 0.02% | 1 | 1.04% |
| Total | 5766 | 96 |
/* SPDX-License-Identifier: GPL-2.0-only */ /* * QLogic Fibre Channel HBA Driver * Copyright (c) 2003-2014 QLogic Corporation */ #ifndef __QLA_FW_H #define __QLA_FW_H #include <linux/nvme.h> #include <linux/nvme-fc.h> #include "qla_dsd.h" #define MBS_CHECKSUM_ERROR 0x4010 #define MBS_INVALID_PRODUCT_KEY 0x4020 /* * Firmware Options. */ #define FO1_ENABLE_PUREX BIT_10 #define FO1_DISABLE_LED_CTRL BIT_6 #define FO1_ENABLE_8016 BIT_0 #define FO2_ENABLE_SEL_CLASS2 BIT_5 #define FO3_NO_ABTS_ON_LINKDOWN BIT_14 #define FO3_HOLD_STS_IOCB BIT_12 /* * Port Database structure definition for ISP 24xx. */ #define PDO_FORCE_ADISC BIT_1 #define PDO_FORCE_PLOGI BIT_0 struct buffer_credit_24xx { u32 parameter[28]; }; #define PORT_DATABASE_24XX_SIZE 64 struct port_database_24xx { uint16_t flags; #define PDF_TASK_RETRY_ID BIT_14 #define PDF_FC_TAPE BIT_7 #define PDF_ACK0_CAPABLE BIT_6 #define PDF_FCP2_CONF BIT_5 #define PDF_CLASS_2 BIT_4 #define PDF_HARD_ADDR BIT_1 /* * for NVMe, the login_state field has been * split into nibbles. * The lower nibble is for FCP. * The upper nibble is for NVMe. */ uint8_t current_login_state; uint8_t last_login_state; #define PDS_PLOGI_PENDING 0x03 #define PDS_PLOGI_COMPLETE 0x04 #define PDS_PRLI_PENDING 0x05 #define PDS_PRLI_COMPLETE 0x06 #define PDS_PORT_UNAVAILABLE 0x07 #define PDS_PRLO_PENDING 0x09 #define PDS_LOGO_PENDING 0x11 #define PDS_PRLI2_PENDING 0x12 uint8_t hard_address[3]; uint8_t reserved_1; uint8_t port_id[3]; uint8_t sequence_id; uint16_t port_timer; uint16_t nport_handle; /* N_PORT handle. */ uint16_t receive_data_size; uint16_t reserved_2; uint8_t prli_svc_param_word_0[2]; /* Big endian */ /* Bits 15-0 of word 0 */ uint8_t prli_svc_param_word_3[2]; /* Big endian */ /* Bits 15-0 of word 3 */ uint8_t port_name[WWN_SIZE]; uint8_t node_name[WWN_SIZE]; uint8_t reserved_3[2]; uint16_t nvme_first_burst_size; uint16_t prli_nvme_svc_param_word_0; /* Bits 15-0 of word 0 */ uint16_t prli_nvme_svc_param_word_3; /* Bits 15-0 of word 3 */ uint8_t secure_login; uint8_t reserved_4[14]; }; /* * MB 75h returns a list of DB entries similar to port_database_24xx(64B). * However, in this case it returns 1st 40 bytes. */ struct get_name_list_extended { __le16 flags; u8 current_login_state; u8 last_login_state; u8 hard_address[3]; u8 reserved_1; u8 port_id[3]; u8 sequence_id; __le16 port_timer; __le16 nport_handle; /* N_PORT handle. */ __le16 receive_data_size; __le16 reserved_2; /* PRLI SVC Param are Big endian */ u8 prli_svc_param_word_0[2]; /* Bits 15-0 of word 0 */ u8 prli_svc_param_word_3[2]; /* Bits 15-0 of word 3 */ u8 port_name[WWN_SIZE]; u8 node_name[WWN_SIZE]; }; /* MB 75h: This is the short version of the database */ struct get_name_list { u8 port_node_name[WWN_SIZE]; /* B7 most sig, B0 least sig */ __le16 nport_handle; u8 reserved; }; struct vp_database_24xx { uint16_t vp_status; uint8_t options; uint8_t id; uint8_t port_name[WWN_SIZE]; uint8_t node_name[WWN_SIZE]; uint16_t port_id_low; uint16_t port_id_high; }; struct nvram_24xx { /* NVRAM header. */ uint8_t id[4]; __le16 nvram_version; uint16_t reserved_0; /* Firmware Initialization Control Block. */ __le16 version; uint16_t reserved_1; __le16 frame_payload_size; __le16 execution_throttle; __le16 exchange_count; __le16 hard_address; uint8_t port_name[WWN_SIZE]; uint8_t node_name[WWN_SIZE]; __le16 login_retry_count; __le16 link_down_on_nos; __le16 interrupt_delay_timer; __le16 login_timeout; __le32 firmware_options_1; __le32 firmware_options_2; __le32 firmware_options_3; /* Offset 56. */ /* * BIT 0 = Control Enable * BIT 1-15 = * * BIT 0-7 = Reserved * BIT 8-10 = Output Swing 1G * BIT 11-13 = Output Emphasis 1G * BIT 14-15 = Reserved * * BIT 0-7 = Reserved * BIT 8-10 = Output Swing 2G * BIT 11-13 = Output Emphasis 2G * BIT 14-15 = Reserved * * BIT 0-7 = Reserved * BIT 8-10 = Output Swing 4G * BIT 11-13 = Output Emphasis 4G * BIT 14-15 = Reserved */ __le16 seriallink_options[4]; uint16_t reserved_2[16]; /* Offset 96. */ uint16_t reserved_3[16]; /* PCIe table entries. */ uint16_t reserved_4[16]; /* Offset 160. */ uint16_t reserved_5[16]; /* Offset 192. */ uint16_t reserved_6[16]; /* Offset 224. */ uint16_t reserved_7[16]; /* * BIT 0 = Enable spinup delay * BIT 1 = Disable BIOS * BIT 2 = Enable Memory Map BIOS * BIT 3 = Enable Selectable Boot * BIT 4 = Disable RISC code load * BIT 5 = Disable Serdes * BIT 6 = * BIT 7 = * * BIT 8 = * BIT 9 = * BIT 10 = Enable lip full login * BIT 11 = Enable target reset * BIT 12 = * BIT 13 = * BIT 14 = * BIT 15 = Enable alternate WWN * * BIT 16-31 = */ __le32 host_p; uint8_t alternate_port_name[WWN_SIZE]; uint8_t alternate_node_name[WWN_SIZE]; uint8_t boot_port_name[WWN_SIZE]; __le16 boot_lun_number; uint16_t reserved_8; uint8_t alt1_boot_port_name[WWN_SIZE]; __le16 alt1_boot_lun_number; uint16_t reserved_9; uint8_t alt2_boot_port_name[WWN_SIZE]; __le16 alt2_boot_lun_number; uint16_t reserved_10; uint8_t alt3_boot_port_name[WWN_SIZE]; __le16 alt3_boot_lun_number; uint16_t reserved_11; /* * BIT 0 = Selective Login * BIT 1 = Alt-Boot Enable * BIT 2 = Reserved * BIT 3 = Boot Order List * BIT 4 = Reserved * BIT 5 = Selective LUN * BIT 6 = Reserved * BIT 7-31 = */ __le32 efi_parameters; uint8_t reset_delay; uint8_t reserved_12; uint16_t reserved_13; __le16 boot_id_number; uint16_t reserved_14; __le16 max_luns_per_target; uint16_t reserved_15; __le16 port_down_retry_count; __le16 link_down_timeout; /* FCode parameters. */ __le16 fcode_parameter; uint16_t reserved_16[3]; /* Offset 352. */ uint8_t prev_drv_ver_major; uint8_t prev_drv_ver_submajob; uint8_t prev_drv_ver_minor; uint8_t prev_drv_ver_subminor; __le16 prev_bios_ver_major; __le16 prev_bios_ver_minor; __le16 prev_efi_ver_major; __le16 prev_efi_ver_minor; __le16 prev_fw_ver_major; uint8_t prev_fw_ver_minor; uint8_t prev_fw_ver_subminor; uint16_t reserved_17[8]; /* Offset 384. */ uint16_t reserved_18[16]; /* Offset 416. */ uint16_t reserved_19[16]; /* Offset 448. */ uint16_t reserved_20[16]; /* Offset 480. */ uint8_t model_name[16]; uint16_t reserved_21[2]; /* Offset 500. */ /* HW Parameter Block. */ uint16_t pcie_table_sig; uint16_t pcie_table_offset; uint16_t subsystem_vendor_id; uint16_t subsystem_device_id; __le32 checksum; }; /* * ISP Initialization Control Block. * Little endian except where noted. */ #define ICB_VERSION 1 struct init_cb_24xx { __le16 version; uint16_t reserved_1; __le16 frame_payload_size; __le16 execution_throttle; __le16 exchange_count; __le16 hard_address; uint8_t port_name[WWN_SIZE]; /* Big endian. */ uint8_t node_name[WWN_SIZE]; /* Big endian. */ __le16 response_q_inpointer; __le16 request_q_outpointer; __le16 login_retry_count; __le16 prio_request_q_outpointer; __le16 response_q_length; __le16 request_q_length; __le16 link_down_on_nos; /* Milliseconds. */ __le16 prio_request_q_length; __le64 request_q_address __packed; __le64 response_q_address __packed; __le64 prio_request_q_address __packed; __le16 msix; __le16 msix_atio; uint8_t reserved_2[4]; __le16 atio_q_inpointer; __le16 atio_q_length; __le64 atio_q_address __packed; __le16 interrupt_delay_timer; /* 100us increments. */ __le16 login_timeout; /* * BIT 0 = Enable Hard Loop Id * BIT 1 = Enable Fairness * BIT 2 = Enable Full-Duplex * BIT 3 = Reserved * BIT 4 = Enable Target Mode * BIT 5 = Disable Initiator Mode * BIT 6 = Acquire FA-WWN * BIT 7 = Enable D-port Diagnostics * * BIT 8 = Reserved * BIT 9 = Non Participating LIP * BIT 10 = Descending Loop ID Search * BIT 11 = Acquire Loop ID in LIPA * BIT 12 = Reserved * BIT 13 = Full Login after LIP * BIT 14 = Node Name Option * BIT 15-31 = Reserved */ __le32 firmware_options_1; /* * BIT 0 = Operation Mode bit 0 * BIT 1 = Operation Mode bit 1 * BIT 2 = Operation Mode bit 2 * BIT 3 = Operation Mode bit 3 * BIT 4 = Connection Options bit 0 * BIT 5 = Connection Options bit 1 * BIT 6 = Connection Options bit 2 * BIT 7 = Enable Non part on LIHA failure * * BIT 8 = Enable Class 2 * BIT 9 = Enable ACK0 * BIT 10 = Reserved * BIT 11 = Enable FC-SP Security * BIT 12 = FC Tape Enable * BIT 13 = Reserved * BIT 14 = Enable Target PRLI Control * BIT 15-31 = Reserved */ __le32 firmware_options_2; /* * BIT 0 = Reserved * BIT 1 = Soft ID only * BIT 2 = Reserved * BIT 3 = Reserved * BIT 4 = FCP RSP Payload bit 0 * BIT 5 = FCP RSP Payload bit 1 * BIT 6 = Enable Receive Out-of-Order data frame handling * BIT 7 = Disable Automatic PLOGI on Local Loop * * BIT 8 = Reserved * BIT 9 = Enable Out-of-Order FCP_XFER_RDY relative offset handling * BIT 10 = Reserved * BIT 11 = Reserved * BIT 12 = Reserved * BIT 13 = Data Rate bit 0 * BIT 14 = Data Rate bit 1 * BIT 15 = Data Rate bit 2 * BIT 16 = Enable 75 ohm Termination Select * BIT 17-28 = Reserved * BIT 29 = Enable response queue 0 in index shadowing * BIT 30 = Enable request queue 0 out index shadowing * BIT 31 = Reserved */ __le32 firmware_options_3; __le16 qos; __le16 rid; uint8_t reserved_3[20]; }; /* * ISP queue - command entry structure definition. */ #define COMMAND_BIDIRECTIONAL 0x75 struct cmd_bidir { uint8_t entry_type; /* Entry type. */ uint8_t entry_count; /* Entry count. */ uint8_t sys_define; /* System defined */ uint8_t entry_status; /* Entry status. */ uint32_t handle; /* System handle. */ __le16 nport_handle; /* N_PORT handle. */ __le16 timeout; /* Command timeout. */ __le16 wr_dseg_count; /* Write Data segment count. */ __le16 rd_dseg_count; /* Read Data segment count. */ struct scsi_lun lun; /* FCP LUN (BE). */ __le16 control_flags; /* Control flags. */ #define BD_WRAP_BACK BIT_3 #define BD_READ_DATA BIT_1 #define BD_WRITE_DATA BIT_0 __le16 fcp_cmnd_dseg_len; /* Data segment length. */ __le64 fcp_cmnd_dseg_address __packed;/* Data segment address. */ uint16_t reserved[2]; /* Reserved */ __le32 rd_byte_count; /* Total Byte count Read. */ __le32 wr_byte_count; /* Total Byte count write. */ uint8_t port_id[3]; /* PortID of destination port.*/ uint8_t vp_index; struct dsd64 fcp_dsd; }; #define COMMAND_TYPE_6 0x48 /* Command Type 6 entry */ struct cmd_type_6 { uint8_t entry_type; /* Entry type. */ uint8_t entry_count; /* Entry count. */ uint8_t sys_define; /* System defined. */ uint8_t entry_status; /* Entry Status. */ uint32_t handle; /* System handle. */ __le16 nport_handle; /* N_PORT handle. */ __le16 timeout; /* Command timeout. */ __le16 dseg_count; /* Data segment count. */ __le16 fcp_rsp_dsd_len; /* FCP_RSP DSD length. */ struct scsi_lun lun; /* FCP LUN (BE). */ __le16 control_flags; /* Control flags. */ #define CF_NEW_SA BIT_12 #define CF_EN_EDIF BIT_9 #define CF_ADDITIONAL_PARAM_BLK BIT_8 #define CF_DIF_SEG_DESCR_ENABLE BIT_3 #define CF_DATA_SEG_DESCR_ENABLE BIT_2 #define CF_READ_DATA BIT_1 #define CF_WRITE_DATA BIT_0 __le16 fcp_cmnd_dseg_len; /* Data segment length. */ /* Data segment address. */ __le64 fcp_cmnd_dseg_address __packed; /* Data segment address. */ __le64 fcp_rsp_dseg_address __packed; __le32 byte_count; /* Total byte count. */ uint8_t port_id[3]; /* PortID of destination port. */ uint8_t vp_index; struct dsd64 fcp_dsd; }; #define COMMAND_TYPE_7 0x18 /* Command Type 7 entry */ struct cmd_type_7 { uint8_t entry_type; /* Entry type. */ uint8_t entry_count; /* Entry count. */ uint8_t sys_define; /* System defined. */ uint8_t entry_status; /* Entry Status. */ uint32_t handle; /* System handle. */ __le16 nport_handle; /* N_PORT handle. */ __le16 timeout; /* Command timeout. */ #define FW_MAX_TIMEOUT 0x1999 __le16 dseg_count; /* Data segment count. */ uint16_t reserved_1; struct scsi_lun lun; /* FCP LUN (BE). */ __le16 task_mgmt_flags; /* Task management flags. */ #define TMF_CLEAR_ACA BIT_14 #define TMF_TARGET_RESET BIT_13 #define TMF_LUN_RESET BIT_12 #define TMF_CLEAR_TASK_SET BIT_10 #define TMF_ABORT_TASK_SET BIT_9 #define TMF_DSD_LIST_ENABLE BIT_2 #define TMF_READ_DATA BIT_1 #define TMF_WRITE_DATA BIT_0 uint8_t task; #define TSK_SIMPLE 0 #define TSK_HEAD_OF_QUEUE 1 #define TSK_ORDERED 2 #define TSK_ACA 4 #define TSK_UNTAGGED 5 uint8_t crn; uint8_t fcp_cdb[MAX_CMDSZ]; /* SCSI command words. */ __le32 byte_count; /* Total byte count. */ uint8_t port_id[3]; /* PortID of destination port. */ uint8_t vp_index; struct dsd64 dsd; }; #define COMMAND_TYPE_CRC_2 0x6A /* Command Type CRC_2 (Type 6) * (T10-DIF) */ struct cmd_type_crc_2 { uint8_t entry_type; /* Entry type. */ uint8_t entry_count; /* Entry count. */ uint8_t sys_define; /* System defined. */ uint8_t entry_status; /* Entry Status. */ uint32_t handle; /* System handle. */ __le16 nport_handle; /* N_PORT handle. */ __le16 timeout; /* Command timeout. */ __le16 dseg_count; /* Data segment count. */ __le16 fcp_rsp_dseg_len; /* FCP_RSP DSD length. */ struct scsi_lun lun; /* FCP LUN (BE). */ __le16 control_flags; /* Control flags. */ __le16 fcp_cmnd_dseg_len; /* Data segment length. */ __le64 fcp_cmnd_dseg_address __packed; /* Data segment address. */ __le64 fcp_rsp_dseg_address __packed; __le32 byte_count; /* Total byte count. */ uint8_t port_id[3]; /* PortID of destination port. */ uint8_t vp_index; __le64 crc_context_address __packed; /* Data segment address. */ __le16 crc_context_len; /* Data segment length. */ uint16_t reserved_1; /* MUST be set to 0. */ }; /* * ISP queue - status entry structure definition. */ #define STATUS_TYPE 0x03 /* Status entry. */ struct sts_entry_24xx { uint8_t entry_type; /* Entry type. */ uint8_t entry_count; /* Entry count. */ uint8_t sys_define; /* System defined. */ uint8_t entry_status; /* Entry Status. */ uint32_t handle; /* System handle. */ __le16 comp_status; /* Completion status. */ __le16 ox_id; /* OX_ID used by the firmware. */ __le32 residual_len; /* FW calc residual transfer length. */ union { __le16 reserved_1; __le16 nvme_rsp_pyld_len; __le16 edif_sa_index; /* edif sa_index used for initiator read data */ }; __le16 state_flags; /* State flags. */ #define SF_TRANSFERRED_DATA BIT_11 #define SF_NVME_ERSP BIT_6 #define SF_FCP_RSP_DMA BIT_0 __le16 status_qualifier; __le16 scsi_status; /* SCSI status. */ #define SS_CONFIRMATION_REQ BIT_12 __le32 rsp_residual_count; /* FCP RSP residual count. */ __le32 sense_len; /* FCP SENSE length. */ union { struct { __le32 rsp_data_len; /* FCP response data length */ uint8_t data[28]; /* FCP rsp/sense information */ }; struct nvme_fc_ersp_iu nvme_ersp; uint8_t nvme_ersp_data[32]; }; /* * If DIF Error is set in comp_status, these additional fields are * defined: * * !!! NOTE: Firmware sends expected/actual DIF data in big endian * format; but all of the "data" field gets swab32-d in the beginning * of qla2x00_status_entry(). * * &data[10] : uint8_t report_runt_bg[2]; - computed guard * &data[12] : uint8_t actual_dif[8]; - DIF Data received * &data[20] : uint8_t expected_dif[8]; - DIF Data computed */ }; /* * Status entry completion status */ #define CS_DATA_REASSEMBLY_ERROR 0x11 /* Data Reassembly Error.. */ #define CS_ABTS_BY_TARGET 0x13 /* Target send ABTS to abort IOCB. */ #define CS_FW_RESOURCE 0x2C /* Firmware Resource Unavailable. */ #define CS_TASK_MGMT_OVERRUN 0x30 /* Task management overrun (8+). */ #define CS_ABORT_BY_TARGET 0x47 /* Abort By Target. */ /* * ISP queue - marker entry structure definition. */ #define MARKER_TYPE 0x04 /* Marker entry. */ struct mrk_entry_24xx { uint8_t entry_type; /* Entry type. */ uint8_t entry_count; /* Entry count. */ uint8_t handle_count; /* Handle count. */ uint8_t entry_status; /* Entry Status. */ uint32_t handle; /* System handle. */ __le16 nport_handle; /* N_PORT handle. */ uint8_t modifier; /* Modifier (7-0). */ #define MK_SYNC_ID_LUN 0 /* Synchronize ID/LUN */ #define MK_SYNC_ID 1 /* Synchronize ID */ #define MK_SYNC_ALL 2 /* Synchronize all ID/LUN */ uint8_t reserved_1; uint8_t reserved_2; uint8_t vp_index; uint16_t reserved_3; uint8_t lun[8]; /* FCP LUN (BE). */ uint8_t reserved_4[40]; }; /* * ISP queue - CT Pass-Through entry structure definition. */ #define CT_IOCB_TYPE 0x29 /* CT Pass-Through IOCB entry */ struct ct_entry_24xx { uint8_t entry_type; /* Entry type. */ uint8_t entry_count; /* Entry count. */ uint8_t sys_define; /* System Defined. */ uint8_t entry_status; /* Entry Status. */ uint32_t handle; /* System handle. */ __le16 comp_status; /* Completion status. */ __le16 nport_handle; /* N_PORT handle. */ __le16 cmd_dsd_count; uint8_t vp_index; uint8_t reserved_1; __le16 timeout; /* Command timeout. */ uint16_t reserved_2; __le16 rsp_dsd_count; uint8_t reserved_3[10]; __le32 rsp_byte_count; __le32 cmd_byte_count; struct dsd64 dsd[2]; }; #define PURX_ELS_HEADER_SIZE 0x18 /* * ISP queue - PUREX IOCB entry structure definition */ #define PUREX_IOCB_TYPE 0x51 /* CT Pass Through IOCB entry */ struct purex_entry_24xx { uint8_t entry_type; /* Entry type. */ uint8_t entry_count; /* Entry count. */ uint8_t sys_define; /* System defined. */ uint8_t entry_status; /* Entry Status. */ __le16 reserved1; uint8_t vp_idx; uint8_t reserved2; __le16 status_flags; __le16 nport_handle; __le16 frame_size; __le16 trunc_frame_size; __le32 rx_xchg_addr; uint8_t d_id[3]; uint8_t r_ctl; uint8_t s_id[3]; uint8_t cs_ctl; uint8_t f_ctl[3]; uint8_t type; __le16 seq_cnt; uint8_t df_ctl; uint8_t seq_id; __le16 rx_id; __le16 ox_id; __le32 param; uint8_t els_frame_payload[20]; }; /* * ISP queue - ELS Pass-Through entry structure definition. */ #define ELS_IOCB_TYPE 0x53 /* ELS Pass-Through IOCB entry */ struct els_entry_24xx { uint8_t entry_type; /* Entry type. */ uint8_t entry_count; /* Entry count. */ uint8_t sys_define; /* System Defined. */ uint8_t entry_status; /* Entry Status. */ uint32_t handle; /* System handle. */ __le16 comp_status; /* response only */ __le16 nport_handle; __le16 tx_dsd_count; uint8_t vp_index; uint8_t sof_type; #define EST_SOFI3 (1 << 4) #define EST_SOFI2 (3 << 4) __le32 rx_xchg_address; /* Receive exchange address. */ __le16 rx_dsd_count; uint8_t opcode; uint8_t reserved_2; uint8_t d_id[3]; uint8_t s_id[3]; __le16 control_flags; /* Control flags. */ #define ECF_PAYLOAD_DESCR_MASK (BIT_15|BIT_14|BIT_13) #define EPD_ELS_COMMAND (0 << 13) #define EPD_ELS_ACC (1 << 13) #define EPD_ELS_RJT (2 << 13) #define EPD_RX_XCHG (3 << 13) /* terminate exchange */ #define ECF_CLR_PASSTHRU_PEND BIT_12 #define ECF_INCL_FRAME_HDR BIT_11 #define ECF_SEC_LOGIN BIT_3 union { struct { __le32 rx_byte_count; __le32 tx_byte_count; __le64 tx_address __packed; /* DSD 0 address. */ __le32 tx_len; /* DSD 0 length. */ __le64 rx_address __packed; /* DSD 1 address. */ __le32 rx_len; /* DSD 1 length. */ }; struct { __le32 total_byte_count; __le32 error_subcode_1; __le32 error_subcode_2; __le32 error_subcode_3; }; }; }; struct els_sts_entry_24xx { uint8_t entry_type; /* Entry type. */ uint8_t entry_count; /* Entry count. */ uint8_t sys_define; /* System Defined. */ uint8_t entry_status; /* Entry Status. */ __le32 handle; /* System handle. */ __le16 comp_status; __le16 nport_handle; /* N_PORT handle. */ __le16 reserved_1; uint8_t vp_index; uint8_t sof_type; __le32 rx_xchg_address; /* Receive exchange address. */ __le16 reserved_2; uint8_t opcode; uint8_t reserved_3; uint8_t d_id[3]; uint8_t s_id[3]; __le16 control_flags; /* Control flags. */ __le32 total_byte_count; __le32 error_subcode_1; __le32 error_subcode_2; __le32 error_subcode_3; __le32 reserved_4[4]; }; /* * ISP queue - Mailbox Command entry structure definition. */ #define MBX_IOCB_TYPE 0x39 struct mbx_entry_24xx { uint8_t entry_type; /* Entry type. */ uint8_t entry_count; /* Entry count. */ uint8_t handle_count; /* Handle count. */ uint8_t entry_status; /* Entry Status. */ uint32_t handle; /* System handle. */ uint16_t mbx[28]; }; #define LOGINOUT_PORT_IOCB_TYPE 0x52 /* Login/Logout Port entry. */ struct logio_entry_24xx { uint8_t entry_type; /* Entry type. */ uint8_t entry_count; /* Entry count. */ uint8_t sys_define; /* System defined. */ uint8_t entry_status; /* Entry Status. */ uint32_t handle; /* System handle. */ __le16 comp_status; /* Completion status. */ #define CS_LOGIO_ERROR 0x31 /* Login/Logout IOCB error. */ __le16 nport_handle; /* N_PORT handle. */ __le16 control_flags; /* Control flags. */ /* Modifiers. */ #define LCF_INCLUDE_SNS BIT_10 /* Include SNS (FFFFFC) during LOGO. */ #define LCF_FCP2_OVERRIDE BIT_9 /* Set/Reset word 3 of PRLI. */ #define LCF_CLASS_2 BIT_8 /* Enable class 2 during PLOGI. */ #define LCF_FREE_NPORT BIT_7 /* Release NPORT handle after LOGO. */ #define LCF_COMMON_FEAT BIT_7 /* PLOGI - Set Common Features Field */ #define LCF_EXPL_LOGO BIT_6 /* Perform an explicit LOGO. */ #define LCF_NVME_PRLI BIT_6 /* Perform NVME FC4 PRLI */ #define LCF_SKIP_PRLI BIT_5 /* Skip PRLI after PLOGI. */ #define LCF_IMPL_LOGO_ALL BIT_5 /* Implicit LOGO to all ports. */ #define LCF_COND_PLOGI BIT_4 /* PLOGI only if not logged-in. */ #define LCF_IMPL_LOGO BIT_4 /* Perform an implicit LOGO. */ #define LCF_IMPL_PRLO BIT_4 /* Perform an implicit PRLO. */ /* Commands. */ #define LCF_COMMAND_PLOGI 0x00 /* PLOGI. */ #define LCF_COMMAND_PRLI 0x01 /* PRLI. */ #define LCF_COMMAND_PDISC 0x02 /* PDISC. */ #define LCF_COMMAND_ADISC 0x03 /* ADISC. */ #define LCF_COMMAND_LOGO 0x08 /* LOGO. */ #define LCF_COMMAND_PRLO 0x09 /* PRLO. */ #define LCF_COMMAND_TPRLO 0x0A /* TPRLO. */ uint8_t vp_index; uint8_t reserved_1; uint8_t port_id[3]; /* PortID of destination port. */ uint8_t rsp_size; /* Response size in 32bit words. */ __le32 io_parameter[11]; /* General I/O parameters. */ #define LIO_COMM_FEAT_FCSP BIT_21 #define LIO_COMM_FEAT_CIO BIT_31 #define LSC_SCODE_NOLINK 0x01 #define LSC_SCODE_NOIOCB 0x02 #define LSC_SCODE_NOXCB 0x03 #define LSC_SCODE_CMD_FAILED 0x04 #define LSC_SCODE_NOFABRIC 0x05 #define LSC_SCODE_FW_NOT_READY 0x07 #define LSC_SCODE_NOT_LOGGED_IN 0x09 #define LSC_SCODE_NOPCB 0x0A #define LSC_SCODE_ELS_REJECT 0x18 #define LSC_SCODE_CMD_PARAM_ERR 0x19 #define LSC_SCODE_PORTID_USED 0x1A #define LSC_SCODE_NPORT_USED 0x1B #define LSC_SCODE_NONPORT 0x1C #define LSC_SCODE_LOGGED_IN 0x1D #define LSC_SCODE_NOFLOGI_ACC 0x1F }; #define TSK_MGMT_IOCB_TYPE 0x14 struct tsk_mgmt_entry { uint8_t entry_type; /* Entry type. */ uint8_t entry_count; /* Entry count. */ uint8_t handle_count; /* Handle count. */ uint8_t entry_status; /* Entry Status. */ uint32_t handle; /* System handle. */ __le16 nport_handle; /* N_PORT handle. */ uint16_t reserved_1; __le16 delay; /* Activity delay in seconds. */ __le16 timeout; /* Command timeout. */ struct scsi_lun lun; /* FCP LUN (BE). */ __le32 control_flags; /* Control Flags. */ #define TCF_NOTMCMD_TO_TARGET BIT_31 #define TCF_LUN_RESET BIT_4 #define TCF_ABORT_TASK_SET BIT_3 #define TCF_CLEAR_TASK_SET BIT_2 #define TCF_TARGET_RESET BIT_1 #define TCF_CLEAR_ACA BIT_0 uint8_t reserved_2[20]; uint8_t port_id[3]; /* PortID of destination port. */ uint8_t vp_index; uint8_t reserved_3[12]; }; #define ABORT_IOCB_TYPE 0x33 struct abort_entry_24xx { uint8_t entry_type; /* Entry type. */ uint8_t entry_count; /* Entry count. */ uint8_t handle_count; /* Handle count. */ uint8_t entry_status; /* Entry Status. */ uint32_t handle; /* System handle. */ union { __le16 nport_handle; /* N_PORT handle. */ __le16 comp_status; /* Completion status. */ }; __le16 options; /* Options. */ #define AOF_NO_ABTS BIT_0 /* Do not send any ABTS. */ #define AOF_NO_RRQ BIT_1 /* Do not send RRQ. */ #define AOF_ABTS_TIMEOUT BIT_2 /* Disable logout on ABTS timeout. */ #define AOF_ABTS_RTY_CNT BIT_3 /* Use driver specified retry count. */ #define AOF_RSP_TIMEOUT BIT_4 /* Use specified response timeout. */ uint32_t handle_to_abort; /* System handle to abort. */ __le16 req_que_no; uint8_t reserved_1[30]; uint8_t port_id[3]; /* PortID of destination port. */ uint8_t vp_index; u8 reserved_2[4]; union { struct { __le16 abts_rty_cnt; __le16 rsp_timeout; } drv; struct { u8 ba_rjt_vendorUnique; u8 ba_rjt_reasonCodeExpl; u8 ba_rjt_reasonCode; u8 reserved_3; } fw; }; u8 reserved_4[4]; }; #define ABTS_RCV_TYPE 0x54 #define ABTS_RSP_TYPE 0x55 struct abts_entry_24xx { uint8_t entry_type; uint8_t entry_count; uint8_t handle_count; uint8_t entry_status; __le32 handle; /* type 0x55 only */ __le16 comp_status; /* type 0x55 only */ __le16 nport_handle; /* type 0x54 only */ __le16 control_flags; /* type 0x55 only */ uint8_t vp_idx; uint8_t sof_type; /* sof_type is upper nibble */ __le32 rx_xch_addr; uint8_t d_id[3]; uint8_t r_ctl; uint8_t s_id[3]; uint8_t cs_ctl; uint8_t f_ctl[3]; uint8_t type; __le16 seq_cnt; uint8_t df_ctl; uint8_t seq_id; __le16 rx_id; __le16 ox_id; __le32 param; union { struct { __le32 subcode3; __le32 rsvd; __le32 subcode1; __le32 subcode2; } error; struct { __le16 rsrvd1; uint8_t last_seq_id; uint8_t seq_id_valid; __le16 aborted_rx_id; __le16 aborted_ox_id; __le16 high_seq_cnt; __le16 low_seq_cnt; } ba_acc; struct { uint8_t vendor_unique; uint8_t explanation; uint8_t reason; } ba_rjt; } payload; __le32 rx_xch_addr_to_abort; } __packed; /* ABTS payload explanation values */ #define BA_RJT_EXP_NO_ADDITIONAL 0 #define BA_RJT_EXP_INV_OX_RX_ID 3 #define BA_RJT_EXP_SEQ_ABORTED 5 /* ABTS payload reason values */ #define BA_RJT_RSN_INV_CMD_CODE 1 #define BA_RJT_RSN_LOGICAL_ERROR 3 #define BA_RJT_RSN_LOGICAL_BUSY 5 #define BA_RJT_RSN_PROTOCOL_ERROR 7 #define BA_RJT_RSN_UNABLE_TO_PERFORM 9 #define BA_RJT_RSN_VENDOR_SPECIFIC 0xff /* FC_F values */ #define FC_TYPE_BLD 0x000 /* Basic link data */ #define FC_F_CTL_RSP_CNTXT 0x800000 /* Responder of exchange */ #define FC_F_CTL_LAST_SEQ 0x100000 /* Last sequence */ #define FC_F_CTL_END_SEQ 0x80000 /* Last sequence */ #define FC_F_CTL_SEQ_INIT 0x010000 /* Sequence initiative */ #define FC_ROUTING_BLD 0x80 /* Basic link data frame */ #define FC_R_CTL_BLD_BA_ACC 0x04 /* BA_ACC (basic accept) */ /* * ISP I/O Register Set structure definitions. */ struct device_reg_24xx { __le32 flash_addr; /* Flash/NVRAM BIOS address. */ #define FARX_DATA_FLAG BIT_31 #define FARX_ACCESS_FLASH_CONF 0x7FFD0000 #define FARX_ACCESS_FLASH_DATA 0x7FF00000 #define FARX_ACCESS_NVRAM_CONF 0x7FFF0000 #define FARX_ACCESS_NVRAM_DATA 0x7FFE0000 #define FA_NVRAM_FUNC0_ADDR 0x80 #define FA_NVRAM_FUNC1_ADDR 0x180 #define FA_NVRAM_VPD_SIZE 0x200 #define FA_NVRAM_VPD0_ADDR 0x00 #define FA_NVRAM_VPD1_ADDR 0x100 #define FA_BOOT_CODE_ADDR 0x00000 /* * RISC code begins at offset 512KB * within flash. Consisting of two * contiguous RISC code segments. */ #define FA_RISC_CODE_ADDR 0x20000 #define FA_RISC_CODE_SEGMENTS 2 #define FA_FLASH_DESCR_ADDR_24 0x11000 #define FA_FLASH_LAYOUT_ADDR_24 0x11400 #define FA_NPIV_CONF0_ADDR_24 0x16000 #define FA_NPIV_CONF1_ADDR_24 0x17000 #define FA_FW_AREA_ADDR 0x40000 #define FA_VPD_NVRAM_ADDR 0x48000 #define FA_FEATURE_ADDR 0x4C000 #define FA_FLASH_DESCR_ADDR 0x50000 #define FA_FLASH_LAYOUT_ADDR 0x50400 #define FA_HW_EVENT0_ADDR 0x54000 #define FA_HW_EVENT1_ADDR 0x54400 #define FA_HW_EVENT_SIZE 0x200 #define FA_HW_EVENT_ENTRY_SIZE 4 #define FA_NPIV_CONF0_ADDR 0x5C000 #define FA_NPIV_CONF1_ADDR 0x5D000 #define FA_FCP_PRIO0_ADDR 0x10000 #define FA_FCP_PRIO1_ADDR 0x12000 /* * Flash Error Log Event Codes. */ #define HW_EVENT_RESET_ERR 0xF00B #define HW_EVENT_ISP_ERR 0xF020 #define HW_EVENT_PARITY_ERR 0xF022 #define HW_EVENT_NVRAM_CHKSUM_ERR 0xF023 #define HW_EVENT_FLASH_FW_ERR 0xF024 __le32 flash_data; /* Flash/NVRAM BIOS data. */ __le32 ctrl_status; /* Control/Status. */ #define CSRX_FLASH_ACCESS_ERROR BIT_18 /* Flash/NVRAM Access Error. */ #define CSRX_DMA_ACTIVE BIT_17 /* DMA Active status. */ #define CSRX_DMA_SHUTDOWN BIT_16 /* DMA Shutdown control status. */ #define CSRX_FUNCTION BIT_15 /* Function number. */ /* PCI-X Bus Mode. */ #define CSRX_PCIX_BUS_MODE_MASK (BIT_11|BIT_10|BIT_9|BIT_8) #define PBM_PCI_33MHZ (0 << 8) #define PBM_PCIX_M1_66MHZ (1 << 8) #define PBM_PCIX_M1_100MHZ (2 << 8) #define PBM_PCIX_M1_133MHZ (3 << 8) #define PBM_PCIX_M2_66MHZ (5 << 8) #define PBM_PCIX_M2_100MHZ (6 << 8) #define PBM_PCIX_M2_133MHZ (7 << 8) #define PBM_PCI_66MHZ (8 << 8) /* Max Write Burst byte count. */ #define CSRX_MAX_WRT_BURST_MASK (BIT_5|BIT_4) #define MWB_512_BYTES (0 << 4) #define MWB_1024_BYTES (1 << 4) #define MWB_2048_BYTES (2 << 4) #define MWB_4096_BYTES (3 << 4) #define CSRX_64BIT_SLOT BIT_2 /* PCI 64-Bit Bus Slot. */ #define CSRX_FLASH_ENABLE BIT_1 /* Flash BIOS Read/Write enable. */ #define CSRX_ISP_SOFT_RESET BIT_0 /* ISP soft reset. */ __le32 ictrl; /* Interrupt control. */ #define ICRX_EN_RISC_INT BIT_3 /* Enable RISC interrupts on PCI. */ __le32 istatus; /* Interrupt status. */ #define ISRX_RISC_INT BIT_3 /* RISC interrupt. */ __le32 unused_1[2]; /* Gap. */ /* Request Queue. */ __le32 req_q_in; /* In-Pointer. */ __le32 req_q_out; /* Out-Pointer. */ /* Response Queue. */ __le32 rsp_q_in; /* In-Pointer. */ __le32 rsp_q_out; /* Out-Pointer. */ /* Priority Request Queue. */ __le32 preq_q_in; /* In-Pointer. */ __le32 preq_q_out; /* Out-Pointer. */ __le32 unused_2[2]; /* Gap. */ /* ATIO Queue. */ __le32 atio_q_in; /* In-Pointer. */ __le32 atio_q_out; /* Out-Pointer. */ __le32 host_status; #define HSRX_RISC_INT BIT_15 /* RISC to Host interrupt. */ #define HSRX_RISC_PAUSED BIT_8 /* RISC Paused. */ __le32 hccr; /* Host command & control register. */ /* HCCR statuses. */ #define HCCRX_HOST_INT BIT_6 /* Host to RISC interrupt bit. */ #define HCCRX_RISC_RESET BIT_5 /* RISC Reset mode bit. */ /* HCCR commands. */ /* NOOP. */ #define HCCRX_NOOP 0x00000000 /* Set RISC Reset. */ #define HCCRX_SET_RISC_RESET 0x10000000 /* Clear RISC Reset. */ #define HCCRX_CLR_RISC_RESET 0x20000000 /* Set RISC Pause. */ #define HCCRX_SET_RISC_PAUSE 0x30000000 /* Releases RISC Pause. */ #define HCCRX_REL_RISC_PAUSE 0x40000000 /* Set HOST to RISC interrupt. */ #define HCCRX_SET_HOST_INT 0x50000000 /* Clear HOST to RISC interrupt. */ #define HCCRX_CLR_HOST_INT 0x60000000 /* Clear RISC to PCI interrupt. */ #define HCCRX_CLR_RISC_INT 0xA0000000 __le32 gpiod; /* GPIO Data register. */ /* LED update mask. */ #define GPDX_LED_UPDATE_MASK (BIT_20|BIT_19|BIT_18) /* Data update mask. */ #define GPDX_DATA_UPDATE_MASK (BIT_17|BIT_16) /* Data update mask. */ #define GPDX_DATA_UPDATE_2_MASK (BIT_28|BIT_27|BIT_26|BIT_17|BIT_16) /* LED control mask. */ #define GPDX_LED_COLOR_MASK (BIT_4|BIT_3|BIT_2) /* LED bit values. Color names as * referenced in fw spec. */ #define GPDX_LED_YELLOW_ON BIT_2 #define GPDX_LED_GREEN_ON BIT_3 #define GPDX_LED_AMBER_ON BIT_4 /* Data in/out. */ #define GPDX_DATA_INOUT (BIT_1|BIT_0) __le32 gpioe; /* GPIO Enable register. */ /* Enable update mask. */ #define GPEX_ENABLE_UPDATE_MASK (BIT_17|BIT_16) /* Enable update mask. */ #define GPEX_ENABLE_UPDATE_2_MASK (BIT_28|BIT_27|BIT_26|BIT_17|BIT_16) /* Enable. */ #define GPEX_ENABLE (BIT_1|BIT_0) __le32 iobase_addr; /* I/O Bus Base Address register. */ __le32 unused_3[10]; /* Gap. */ __le16 mailbox0; __le16 mailbox1; __le16 mailbox2; __le16 mailbox3; __le16 mailbox4; __le16 mailbox5; __le16 mailbox6; __le16 mailbox7; __le16 mailbox8; __le16 mailbox9; __le16 mailbox10; __le16 mailbox11; __le16 mailbox12; __le16 mailbox13; __le16 mailbox14; __le16 mailbox15; __le16 mailbox16; __le16 mailbox17; __le16 mailbox18; __le16 mailbox19; __le16 mailbox20; __le16 mailbox21; __le16 mailbox22; __le16 mailbox23; __le16 mailbox24; __le16 mailbox25; __le16 mailbox26; __le16 mailbox27; __le16 mailbox28; __le16 mailbox29; __le16 mailbox30; __le16 mailbox31; __le32 iobase_window; __le32 iobase_c4; __le32 iobase_c8; __le32 unused_4_1[6]; /* Gap. */ __le32 iobase_q; __le32 unused_5[2]; /* Gap. */ __le32 iobase_select; __le32 unused_6[2]; /* Gap. */ __le32 iobase_sdata; }; /* RISC-RISC semaphore register PCI offet */ #define RISC_REGISTER_BASE_OFFSET 0x7010 #define RISC_REGISTER_WINDOW_OFFSET 0x6 /* RISC-RISC semaphore/flag register (risc address 0x7016) */ #define RISC_SEMAPHORE 0x1UL #define RISC_SEMAPHORE_WE (RISC_SEMAPHORE << 16) #define RISC_SEMAPHORE_CLR (RISC_SEMAPHORE_WE | 0x0UL) #define RISC_SEMAPHORE_SET (RISC_SEMAPHORE_WE | RISC_SEMAPHORE) #define RISC_SEMAPHORE_FORCE 0x8000UL #define RISC_SEMAPHORE_FORCE_WE (RISC_SEMAPHORE_FORCE << 16) #define RISC_SEMAPHORE_FORCE_CLR (RISC_SEMAPHORE_FORCE_WE | 0x0UL) #define RISC_SEMAPHORE_FORCE_SET \ (RISC_SEMAPHORE_FORCE_WE | RISC_SEMAPHORE_FORCE) /* RISC semaphore timeouts (ms) */ #define TIMEOUT_SEMAPHORE 2500 #define TIMEOUT_SEMAPHORE_FORCE 2000 #define TIMEOUT_TOTAL_ELAPSED 4500 /* Trace Control *************************************************************/ #define TC_AEN_DISABLE 0 #define TC_EFT_ENABLE 4 #define TC_EFT_DISABLE 5 #define TC_FCE_ENABLE 8 #define TC_FCE_OPTIONS 0 #define TC_FCE_DEFAULT_RX_SIZE 2112 #define TC_FCE_DEFAULT_TX_SIZE 2112 #define TC_FCE_DISABLE 9 #define TC_FCE_DISABLE_TRACE BIT_0 /* MID Support ***************************************************************/ #define MIN_MULTI_ID_FABRIC 64 /* Must be power-of-2. */ #define MAX_MULTI_ID_FABRIC 256 /* ... */ struct mid_conf_entry_24xx { uint16_t reserved_1; /* * BIT 0 = Enable Hard Loop Id * BIT 1 = Acquire Loop ID in LIPA * BIT 2 = ID not Acquired * BIT 3 = Enable VP * BIT 4 = Enable Initiator Mode * BIT 5 = Disable Target Mode * BIT 6-7 = Reserved */ uint8_t options; uint8_t hard_address; uint8_t port_name[WWN_SIZE]; uint8_t node_name[WWN_SIZE]; }; struct mid_init_cb_24xx { struct init_cb_24xx init_cb; __le16 count; __le16 options; struct mid_conf_entry_24xx entries[MAX_MULTI_ID_FABRIC]; }; struct mid_db_entry_24xx { uint16_t status; #define MDBS_NON_PARTIC BIT_3 #define MDBS_ID_ACQUIRED BIT_1 #define MDBS_ENABLED BIT_0 uint8_t options; uint8_t hard_address; uint8_t port_name[WWN_SIZE]; uint8_t node_name[WWN_SIZE]; uint8_t port_id[3]; uint8_t reserved_1; }; /* * Virtual Port Control IOCB */ #define VP_CTRL_IOCB_TYPE 0x30 /* Virtual Port Control entry. */ struct vp_ctrl_entry_24xx { uint8_t entry_type; /* Entry type. */ uint8_t entry_count; /* Entry count. */ uint8_t sys_define; /* System defined. */ uint8_t entry_status; /* Entry Status. */ uint32_t handle; /* System handle. */ __le16 vp_idx_failed; __le16 comp_status; /* Completion status. */ #define CS_VCE_IOCB_ERROR 0x01 /* Error processing IOCB */ #define CS_VCE_ACQ_ID_ERROR 0x02 /* Error while acquireing ID. */ #define CS_VCE_BUSY 0x05 /* Firmware not ready to accept cmd. */ __le16 command; #define VCE_COMMAND_ENABLE_VPS 0x00 /* Enable VPs. */ #define VCE_COMMAND_DISABLE_VPS 0x08 /* Disable VPs. */ #define VCE_COMMAND_DISABLE_VPS_REINIT 0x09 /* Disable VPs and reinit link. */ #define VCE_COMMAND_DISABLE_VPS_LOGO 0x0a /* Disable VPs and LOGO ports. */ #define VCE_COMMAND_DISABLE_VPS_LOGO_ALL 0x0b /* Disable VPs and LOGO ports. */ __le16 vp_count; uint8_t vp_idx_map[16]; __le16 flags; __le16 id; uint16_t reserved_4; __le16 hopct; uint8_t reserved_5[24]; }; /* * Modify Virtual Port Configuration IOCB */ #define VP_CONFIG_IOCB_TYPE 0x31 /* Virtual Port Config entry. */ struct vp_config_entry_24xx { uint8_t entry_type; /* Entry type. */ uint8_t entry_count; /* Entry count. */ uint8_t handle_count; uint8_t entry_status; /* Entry Status. */ uint32_t handle; /* System handle. */ __le16 flags; #define CS_VF_BIND_VPORTS_TO_VF BIT_0 #define CS_VF_SET_QOS_OF_VPORTS BIT_1 #define CS_VF_SET_HOPS_OF_VPORTS BIT_2 __le16 comp_status; /* Completion status. */ #define CS_VCT_STS_ERROR 0x01 /* Specified VPs were not disabled. */ #define CS_VCT_CNT_ERROR 0x02 /* Invalid VP count. */ #define CS_VCT_ERROR 0x03 /* Unknown error. */ #define CS_VCT_IDX_ERROR 0x02 /* Invalid VP index. */ #define CS_VCT_BUSY 0x05 /* Firmware not ready to accept cmd. */ uint8_t command; #define VCT_COMMAND_MOD_VPS 0x00 /* Modify VP configurations. */ #define VCT_COMMAND_MOD_ENABLE_VPS 0x01 /* Modify configuration & enable VPs. */ uint8_t vp_count; uint8_t vp_index1; uint8_t vp_index2; uint8_t options_idx1; uint8_t hard_address_idx1; uint16_t reserved_vp1; uint8_t port_name_idx1[WWN_SIZE]; uint8_t node_name_idx1[WWN_SIZE]; uint8_t options_idx2; uint8_t hard_address_idx2; uint16_t reserved_vp2; uint8_t port_name_idx2[WWN_SIZE]; uint8_t node_name_idx2[WWN_SIZE]; __le16 id; uint16_t reserved_4; __le16 hopct; uint8_t reserved_5[2]; }; #define VP_RPT_ID_IOCB_TYPE 0x32 /* Report ID Acquisition entry. */ enum VP_STATUS { VP_STAT_COMPL, VP_STAT_FAIL, VP_STAT_ID_CHG, VP_STAT_SNS_TO, /* timeout */ VP_STAT_SNS_RJT, VP_STAT_SCR_TO, /* timeout */ VP_STAT_SCR_RJT, }; enum VP_FLAGS { VP_FLAGS_CON_FLOOP = 1, VP_FLAGS_CON_P2P = 2, VP_FLAGS_CON_FABRIC = 3, VP_FLAGS_NAME_VALID = BIT_5, }; struct vp_rpt_id_entry_24xx { uint8_t entry_type; /* Entry type. */ uint8_t entry_count; /* Entry count. */ uint8_t sys_define; /* System defined. */ uint8_t entry_status; /* Entry Status. */ __le32 resv1; uint8_t vp_acquired; uint8_t vp_setup; uint8_t vp_idx; /* Format 0=reserved */ uint8_t vp_status; /* Format 0=reserved */ uint8_t port_id[3]; uint8_t format; union { struct _f0 { /* format 0 loop */ uint8_t vp_idx_map[16]; uint8_t reserved_4[32]; } f0; struct _f1 { /* format 1 fabric */ uint8_t vpstat1_subcode; /* vp_status=1 subcode */ uint8_t flags; #define TOPO_MASK 0xE #define TOPO_FL 0x2 #define TOPO_N2N 0x4 #define TOPO_F 0x6 uint16_t fip_flags; uint8_t rsv2[12]; uint8_t ls_rjt_vendor; uint8_t ls_rjt_explanation; uint8_t ls_rjt_reason; uint8_t rsv3[5]; uint8_t port_name[8]; uint8_t node_name[8]; uint16_t bbcr; uint8_t reserved_5[6]; } f1; struct _f2 { /* format 2: N2N direct connect */ uint8_t vpstat1_subcode; uint8_t flags; uint16_t fip_flags; uint8_t rsv2[12]; uint8_t ls_rjt_vendor; uint8_t ls_rjt_explanation; uint8_t ls_rjt_reason; uint8_t rsv3[5]; uint8_t port_name[8]; uint8_t node_name[8]; uint16_t bbcr; uint8_t reserved_5[2]; uint8_t remote_nport_id[4]; } f2; } u; }; #define VF_EVFP_IOCB_TYPE 0x26 /* Exchange Virtual Fabric Parameters entry. */ struct vf_evfp_entry_24xx { uint8_t entry_type; /* Entry type. */ uint8_t entry_count; /* Entry count. */ uint8_t sys_define; /* System defined. */ uint8_t entry_status; /* Entry Status. */ uint32_t handle; /* System handle. */ __le16 comp_status; /* Completion status. */ __le16 timeout; /* timeout */ __le16 adim_tagging_mode; __le16 vfport_id; uint32_t exch_addr; __le16 nport_handle; /* N_PORT handle. */ __le16 control_flags; uint32_t io_parameter_0; uint32_t io_parameter_1; __le64 tx_address __packed; /* Data segment 0 address. */ uint32_t tx_len; /* Data segment 0 length. */ __le64 rx_address __packed; /* Data segment 1 address. */ uint32_t rx_len; /* Data segment 1 length. */ }; /* END MID Support ***********************************************************/ /* Flash Description Table ***************************************************/ struct qla_fdt_layout { uint8_t sig[4]; __le16 version; __le16 len; __le16 checksum; uint8_t unused1[2]; uint8_t model[16]; __le16 man_id; __le16 id; uint8_t flags; uint8_t erase_cmd; uint8_t alt_erase_cmd; uint8_t wrt_enable_cmd; uint8_t wrt_enable_bits; uint8_t wrt_sts_reg_cmd; uint8_t unprotect_sec_cmd; uint8_t read_man_id_cmd; __le32 block_size; __le32 alt_block_size; __le32 flash_size; __le32 wrt_enable_data; uint8_t read_id_addr_len; uint8_t wrt_disable_bits; uint8_t read_dev_id_len; uint8_t chip_erase_cmd; __le16 read_timeout; uint8_t protect_sec_cmd; uint8_t unused2[65]; }; /* Flash Layout Table ********************************************************/ struct qla_flt_location { uint8_t sig[4]; __le16 start_lo; __le16 start_hi; uint8_t version; uint8_t unused[5]; __le16 checksum; }; #define FLT_REG_FW 0x01 #define FLT_REG_BOOT_CODE 0x07 #define FLT_REG_VPD_0 0x14 #define FLT_REG_NVRAM_0 0x15 #define FLT_REG_VPD_1 0x16 #define FLT_REG_NVRAM_1 0x17 #define FLT_REG_VPD_2 0xD4 #define FLT_REG_NVRAM_2 0xD5 #define FLT_REG_VPD_3 0xD6 #define FLT_REG_NVRAM_3 0xD7 #define FLT_REG_FDT 0x1a #define FLT_REG_FLT 0x1c #define FLT_REG_HW_EVENT_0 0x1d #define FLT_REG_HW_EVENT_1 0x1f #define FLT_REG_NPIV_CONF_0 0x29 #define FLT_REG_NPIV_CONF_1 0x2a #define FLT_REG_GOLD_FW 0x2f #define FLT_REG_FCP_PRIO_0 0x87 #define FLT_REG_FCP_PRIO_1 0x88 #define FLT_REG_CNA_FW 0x97 #define FLT_REG_BOOT_CODE_8044 0xA2 #define FLT_REG_FCOE_FW 0xA4 #define FLT_REG_FCOE_NVRAM_0 0xAA #define FLT_REG_FCOE_NVRAM_1 0xAC /* 27xx */ #define FLT_REG_IMG_PRI_27XX 0x95 #define FLT_REG_IMG_SEC_27XX 0x96 #define FLT_REG_FW_SEC_27XX 0x02 #define FLT_REG_BOOTLOAD_SEC_27XX 0x9 #define FLT_REG_VPD_SEC_27XX_0 0x50 #define FLT_REG_VPD_SEC_27XX_1 0x52 #define FLT_REG_VPD_SEC_27XX_2 0xD8 #define FLT_REG_VPD_SEC_27XX_3 0xDA #define FLT_REG_NVME_PARAMS_27XX 0x21 /* 28xx */ #define FLT_REG_AUX_IMG_PRI_28XX 0x125 #define FLT_REG_AUX_IMG_SEC_28XX 0x126 #define FLT_REG_VPD_SEC_28XX_0 0x10C #define FLT_REG_VPD_SEC_28XX_1 0x10E #define FLT_REG_VPD_SEC_28XX_2 0x110 #define FLT_REG_VPD_SEC_28XX_3 0x112 #define FLT_REG_NVRAM_SEC_28XX_0 0x10D #define FLT_REG_NVRAM_SEC_28XX_1 0x10F #define FLT_REG_NVRAM_SEC_28XX_2 0x111 #define FLT_REG_NVRAM_SEC_28XX_3 0x113 #define FLT_REG_MPI_PRI_28XX 0xD3 #define FLT_REG_MPI_SEC_28XX 0xF0 #define FLT_REG_PEP_PRI_28XX 0xD1 #define FLT_REG_PEP_SEC_28XX 0xF1 #define FLT_REG_NVME_PARAMS_PRI_28XX 0x14E #define FLT_REG_NVME_PARAMS_SEC_28XX 0x179 struct qla_flt_region { __le16 code; uint8_t attribute; uint8_t reserved; __le32 size; __le32 start; __le32 end; }; struct qla_flt_header { __le16 version; __le16 length; __le16 checksum; __le16 unused; struct qla_flt_region region[]; }; #define FLT_REGION_SIZE 16 #define FLT_MAX_REGIONS 0xFF #define FLT_REGIONS_SIZE (FLT_REGION_SIZE * FLT_MAX_REGIONS) /* Flash NPIV Configuration Table ********************************************/ struct qla_npiv_header { uint8_t sig[2]; __le16 version; __le16 entries; __le16 unused[4]; __le16 checksum; }; struct qla_npiv_entry { __le16 flags; __le16 vf_id; uint8_t q_qos; uint8_t f_qos; __le16 unused1; uint8_t port_name[WWN_SIZE]; uint8_t node_name[WWN_SIZE]; }; /* 84XX Support **************************************************************/ #define MBA_ISP84XX_ALERT 0x800f /* Alert Notification. */ #define A84_PANIC_RECOVERY 0x1 #define A84_OP_LOGIN_COMPLETE 0x2 #define A84_DIAG_LOGIN_COMPLETE 0x3 #define A84_GOLD_LOGIN_COMPLETE 0x4 #define MBC_ISP84XX_RESET 0x3a /* Reset. */ #define FSTATE_REMOTE_FC_DOWN BIT_0 #define FSTATE_NSL_LINK_DOWN BIT_1 #define FSTATE_IS_DIAG_FW BIT_2 #define FSTATE_LOGGED_IN BIT_3 #define FSTATE_WAITING_FOR_VERIFY BIT_4 #define VERIFY_CHIP_IOCB_TYPE 0x1B struct verify_chip_entry_84xx { uint8_t entry_type; uint8_t entry_count; uint8_t sys_defined; uint8_t entry_status; uint32_t handle; __le16 options; #define VCO_DONT_UPDATE_FW BIT_0 #define VCO_FORCE_UPDATE BIT_1 #define VCO_DONT_RESET_UPDATE BIT_2 #define VCO_DIAG_FW BIT_3 #define VCO_END_OF_DATA BIT_14 #define VCO_ENABLE_DSD BIT_15 __le16 reserved_1; __le16 data_seg_cnt; __le16 reserved_2[3]; __le32 fw_ver; __le32 exchange_address; __le32 reserved_3[3]; __le32 fw_size; __le32 fw_seq_size; __le32 relative_offset; struct dsd64 dsd; }; struct verify_chip_rsp_84xx { uint8_t entry_type; uint8_t entry_count; uint8_t sys_defined; uint8_t entry_status; uint32_t handle; __le16 comp_status; #define CS_VCS_CHIP_FAILURE 0x3 #define CS_VCS_BAD_EXCHANGE 0x8 #define CS_VCS_SEQ_COMPLETEi 0x40 __le16 failure_code; #define VFC_CHECKSUM_ERROR 0x1 #define VFC_INVALID_LEN 0x2 #define VFC_ALREADY_IN_PROGRESS 0x8 __le16 reserved_1[4]; __le32 fw_ver; __le32 exchange_address; __le32 reserved_2[6]; }; #define ACCESS_CHIP_IOCB_TYPE 0x2B struct access_chip_84xx { uint8_t entry_type; uint8_t entry_count; uint8_t sys_defined; uint8_t entry_status; uint32_t handle; __le16 options; #define ACO_DUMP_MEMORY 0x0 #define ACO_LOAD_MEMORY 0x1 #define ACO_CHANGE_CONFIG_PARAM 0x2 #define ACO_REQUEST_INFO 0x3 __le16 reserved1; __le16 dseg_count; __le16 reserved2[3]; __le32 parameter1; __le32 parameter2; __le32 parameter3; __le32 reserved3[3]; __le32 total_byte_cnt; __le32 reserved4; struct dsd64 dsd; }; struct access_chip_rsp_84xx { uint8_t entry_type; uint8_t entry_count; uint8_t sys_defined; uint8_t entry_status; uint32_t handle; __le16 comp_status; __le16 failure_code; __le32 residual_count; __le32 reserved[12]; }; /* 81XX Support **************************************************************/ #define MBA_DCBX_START 0x8016 #define MBA_DCBX_COMPLETE 0x8030 #define MBA_FCF_CONF_ERR 0x8031 #define MBA_DCBX_PARAM_UPDATE 0x8032 #define MBA_IDC_COMPLETE 0x8100 #define MBA_IDC_NOTIFY 0x8101 #define MBA_IDC_TIME_EXT 0x8102 #define MBC_IDC_ACK 0x101 #define MBC_RESTART_MPI_FW 0x3d #define MBC_FLASH_ACCESS_CTRL 0x3e /* Control flash access. */ #define MBC_GET_XGMAC_STATS 0x7a #define MBC_GET_DCBX_PARAMS 0x51 /* * ISP83xx mailbox commands */ #define MBC_WRITE_REMOTE_REG 0x0001 /* Write remote register */ #define MBC_READ_REMOTE_REG 0x0009 /* Read remote register */ #define MBC_RESTART_NIC_FIRMWARE 0x003d /* Restart NIC firmware */ #define MBC_SET_ACCESS_CONTROL 0x003e /* Access control command */ /* Flash access control option field bit definitions */ #define FAC_OPT_FORCE_SEMAPHORE BIT_15 #define FAC_OPT_REQUESTOR_ID BIT_14 #define FAC_OPT_CMD_SUBCODE 0xff /* Flash access control command subcodes */ #define FAC_OPT_CMD_WRITE_PROTECT 0x00 #define FAC_OPT_CMD_WRITE_ENABLE 0x01 #define FAC_OPT_CMD_ERASE_SECTOR 0x02 #define FAC_OPT_CMD_LOCK_SEMAPHORE 0x03 #define FAC_OPT_CMD_UNLOCK_SEMAPHORE 0x04 #define FAC_OPT_CMD_GET_SECTOR_SIZE 0x05 /* enhanced features bit definitions */ #define NEF_LR_DIST_ENABLE BIT_0 /* LR Distance bit positions */ #define LR_DIST_NV_POS 2 #define LR_DIST_NV_MASK 0xf #define LR_DIST_FW_POS 12 /* FAC semaphore defines */ #define FAC_SEMAPHORE_UNLOCK 0 #define FAC_SEMAPHORE_LOCK 1 struct nvram_81xx { /* NVRAM header. */ uint8_t id[4]; __le16 nvram_version; __le16 reserved_0; /* Firmware Initialization Control Block. */ __le16 version; __le16 reserved_1; __le16 frame_payload_size; __le16 execution_throttle; __le16 exchange_count; __le16 reserved_2; uint8_t port_name[WWN_SIZE]; uint8_t node_name[WWN_SIZE]; __le16 login_retry_count; __le16 reserved_3; __le16 interrupt_delay_timer; __le16 login_timeout; __le32 firmware_options_1; __le32 firmware_options_2; __le32 firmware_options_3; __le16 reserved_4[4]; /* Offset 64. */ uint8_t enode_mac[6]; __le16 reserved_5[5]; /* Offset 80. */ __le16 reserved_6[24]; /* Offset 128. */ __le16 ex_version; uint8_t prio_fcf_matching_flags; uint8_t reserved_6_1[3]; __le16 pri_fcf_vlan_id; uint8_t pri_fcf_fabric_name[8]; __le16 reserved_6_2[7]; uint8_t spma_mac_addr[6]; __le16 reserved_6_3[14]; /* Offset 192. */ uint8_t min_supported_speed; uint8_t reserved_7_0; __le16 reserved_7[31]; /* * BIT 0 = Enable spinup delay * BIT 1 = Disable BIOS * BIT 2 = Enable Memory Map BIOS * BIT 3 = Enable Selectable Boot * BIT 4 = Disable RISC code load * BIT 5 = Disable Serdes * BIT 6 = Opt boot mode * BIT 7 = Interrupt enable * * BIT 8 = EV Control enable * BIT 9 = Enable lip reset * BIT 10 = Enable lip full login * BIT 11 = Enable target reset * BIT 12 = Stop firmware * BIT 13 = Enable nodename option * BIT 14 = Default WWPN valid * BIT 15 = Enable alternate WWN * * BIT 16 = CLP LUN string * BIT 17 = CLP Target string * BIT 18 = CLP BIOS enable string * BIT 19 = CLP Serdes string * BIT 20 = CLP WWPN string * BIT 21 = CLP WWNN string * BIT 22 = * BIT 23 = * BIT 24 = Keep WWPN * BIT 25 = Temp WWPN * BIT 26-31 = */ __le32 host_p; uint8_t alternate_port_name[WWN_SIZE]; uint8_t alternate_node_name[WWN_SIZE]; uint8_t boot_port_name[WWN_SIZE]; __le16 boot_lun_number; __le16 reserved_8; uint8_t alt1_boot_port_name[WWN_SIZE]; __le16 alt1_boot_lun_number; __le16 reserved_9; uint8_t alt2_boot_port_name[WWN_SIZE]; __le16 alt2_boot_lun_number; __le16 reserved_10; uint8_t alt3_boot_port_name[WWN_SIZE]; __le16 alt3_boot_lun_number; __le16 reserved_11; /* * BIT 0 = Selective Login * BIT 1 = Alt-Boot Enable * BIT 2 = Reserved * BIT 3 = Boot Order List * BIT 4 = Reserved * BIT 5 = Selective LUN * BIT 6 = Reserved * BIT 7-31 = */ __le32 efi_parameters; uint8_t reset_delay; uint8_t reserved_12; __le16 reserved_13; __le16 boot_id_number; __le16 reserved_14; __le16 max_luns_per_target; __le16 reserved_15; __le16 port_down_retry_count; __le16 link_down_timeout; /* FCode parameters. */ __le16 fcode_parameter; __le16 reserved_16[3]; /* Offset 352. */ uint8_t reserved_17[4]; __le16 reserved_18[5]; uint8_t reserved_19[2]; __le16 reserved_20[8]; /* Offset 384. */ uint8_t reserved_21[16]; __le16 reserved_22[3]; /* Offset 406 (0x196) Enhanced Features * BIT 0 = Extended BB credits for LR * BIT 1 = Virtual Fabric Enable * BIT 2-5 = Distance Support if BIT 0 is on * BIT 6 = Prefer FCP * BIT 7 = SCM Disabled if BIT is set (1) * BIT 8-15 = Unused */ uint16_t enhanced_features; uint16_t reserved_24[4]; /* Offset 416. */ __le16 reserved_25[32]; /* Offset 480. */ uint8_t model_name[16]; /* Offset 496. */ __le16 feature_mask_l; __le16 feature_mask_h; __le16 reserved_26[2]; __le16 subsystem_vendor_id; __le16 subsystem_device_id; __le32 checksum; }; /* * ISP Initialization Control Block. * Little endian except where noted. */ #define ICB_VERSION 1 struct init_cb_81xx { __le16 version; __le16 reserved_1; __le16 frame_payload_size; __le16 execution_throttle; __le16 exchange_count; __le16 reserved_2; uint8_t port_name[WWN_SIZE]; /* Big endian. */ uint8_t node_name[WWN_SIZE]; /* Big endian. */ __le16 response_q_inpointer; __le16 request_q_outpointer; __le16 login_retry_count; __le16 prio_request_q_outpointer; __le16 response_q_length; __le16 request_q_length; __le16 reserved_3; __le16 prio_request_q_length; __le64 request_q_address __packed; __le64 response_q_address __packed; __le64 prio_request_q_address __packed; uint8_t reserved_4[8]; __le16 atio_q_inpointer; __le16 atio_q_length; __le64 atio_q_address __packed; __le16 interrupt_delay_timer; /* 100us increments. */ __le16 login_timeout; /* * BIT 0-3 = Reserved * BIT 4 = Enable Target Mode * BIT 5 = Disable Initiator Mode * BIT 6 = Reserved * BIT 7 = Reserved * * BIT 8-13 = Reserved * BIT 14 = Node Name Option * BIT 15-31 = Reserved */ __le32 firmware_options_1; /* * BIT 0 = Operation Mode bit 0 * BIT 1 = Operation Mode bit 1 * BIT 2 = Operation Mode bit 2 * BIT 3 = Operation Mode bit 3 * BIT 4-7 = Reserved * * BIT 8 = Enable Class 2 * BIT 9 = Enable ACK0 * BIT 10 = Reserved * BIT 11 = Enable FC-SP Security * BIT 12 = FC Tape Enable * BIT 13 = Reserved * BIT 14 = Enable Target PRLI Control * BIT 15-31 = Reserved */ __le32 firmware_options_2; /* * BIT 0-3 = Reserved * BIT 4 = FCP RSP Payload bit 0 * BIT 5 = FCP RSP Payload bit 1 * BIT 6 = Enable Receive Out-of-Order data frame handling * BIT 7 = Reserved * * BIT 8 = Reserved * BIT 9 = Enable Out-of-Order FCP_XFER_RDY relative offset handling * BIT 10-16 = Reserved * BIT 17 = Enable multiple FCFs * BIT 18-20 = MAC addressing mode * BIT 21-25 = Ethernet data rate * BIT 26 = Enable ethernet header rx IOCB for ATIO q * BIT 27 = Enable ethernet header rx IOCB for response q * BIT 28 = SPMA selection bit 0 * BIT 28 = SPMA selection bit 1 * BIT 30-31 = Reserved */ __le32 firmware_options_3; uint8_t reserved_5[8]; uint8_t enode_mac[6]; uint8_t reserved_6[10]; }; struct mid_init_cb_81xx { struct init_cb_81xx init_cb; uint16_t count; uint16_t options; struct mid_conf_entry_24xx entries[MAX_MULTI_ID_FABRIC]; }; struct ex_init_cb_81xx { uint16_t ex_version; uint8_t prio_fcf_matching_flags; uint8_t reserved_1[3]; uint16_t pri_fcf_vlan_id; uint8_t pri_fcf_fabric_name[8]; uint16_t reserved_2[7]; uint8_t spma_mac_addr[6]; uint16_t reserved_3[14]; }; #define FARX_ACCESS_FLASH_CONF_81XX 0x7FFD0000 #define FARX_ACCESS_FLASH_DATA_81XX 0x7F800000 #define FARX_ACCESS_FLASH_CONF_28XX 0x7FFD0000 #define FARX_ACCESS_FLASH_DATA_28XX 0x7F7D0000 /* FCP priority config defines *************************************/ /* operations */ #define QLFC_FCP_PRIO_DISABLE 0x0 #define QLFC_FCP_PRIO_ENABLE 0x1 #define QLFC_FCP_PRIO_GET_CONFIG 0x2 #define QLFC_FCP_PRIO_SET_CONFIG 0x3 struct qla_fcp_prio_entry { uint16_t flags; /* Describes parameter(s) in FCP */ /* priority entry that are valid */ #define FCP_PRIO_ENTRY_VALID 0x1 #define FCP_PRIO_ENTRY_TAG_VALID 0x2 #define FCP_PRIO_ENTRY_SPID_VALID 0x4 #define FCP_PRIO_ENTRY_DPID_VALID 0x8 #define FCP_PRIO_ENTRY_LUNB_VALID 0x10 #define FCP_PRIO_ENTRY_LUNE_VALID 0x20 #define FCP_PRIO_ENTRY_SWWN_VALID 0x40 #define FCP_PRIO_ENTRY_DWWN_VALID 0x80 uint8_t tag; /* Priority value */ uint8_t reserved; /* Reserved for future use */ uint32_t src_pid; /* Src port id. high order byte */ /* unused; -1 (wild card) */ uint32_t dst_pid; /* Src port id. high order byte */ /* unused; -1 (wild card) */ uint16_t lun_beg; /* 1st lun num of lun range. */ /* -1 (wild card) */ uint16_t lun_end; /* 2nd lun num of lun range. */ /* -1 (wild card) */ uint8_t src_wwpn[8]; /* Source WWPN: -1 (wild card) */ uint8_t dst_wwpn[8]; /* Destination WWPN: -1 (wild card) */ }; struct qla_fcp_prio_cfg { uint8_t signature[4]; /* "HQOS" signature of config data */ uint16_t version; /* 1: Initial version */ uint16_t length; /* config data size in num bytes */ uint16_t checksum; /* config data bytes checksum */ uint16_t num_entries; /* Number of entries */ uint16_t size_of_entry; /* Size of each entry in num bytes */ uint8_t attributes; /* enable/disable, persistence */ #define FCP_PRIO_ATTR_DISABLE 0x0 #define FCP_PRIO_ATTR_ENABLE 0x1 #define FCP_PRIO_ATTR_PERSIST 0x2 uint8_t reserved; /* Reserved for future use */ #define FCP_PRIO_CFG_HDR_SIZE offsetof(struct qla_fcp_prio_cfg, entry) struct qla_fcp_prio_entry entry[1023]; /* fcp priority entries */ uint8_t reserved2[16]; }; #define FCP_PRIO_CFG_SIZE (32*1024) /* fcp prio data per port*/ /* 25XX Support ****************************************************/ #define FA_FCP_PRIO0_ADDR_25 0x3C000 #define FA_FCP_PRIO1_ADDR_25 0x3E000 /* 81XX Flash locations -- occupies second 2MB region. */ #define FA_BOOT_CODE_ADDR_81 0x80000 #define FA_RISC_CODE_ADDR_81 0xA0000 #define FA_FW_AREA_ADDR_81 0xC0000 #define FA_VPD_NVRAM_ADDR_81 0xD0000 #define FA_VPD0_ADDR_81 0xD0000 #define FA_VPD1_ADDR_81 0xD0400 #define FA_NVRAM0_ADDR_81 0xD0080 #define FA_NVRAM1_ADDR_81 0xD0180 #define FA_FEATURE_ADDR_81 0xD4000 #define FA_FLASH_DESCR_ADDR_81 0xD8000 #define FA_FLASH_LAYOUT_ADDR_81 0xD8400 #define FA_HW_EVENT0_ADDR_81 0xDC000 #define FA_HW_EVENT1_ADDR_81 0xDC400 #define FA_NPIV_CONF0_ADDR_81 0xD1000 #define FA_NPIV_CONF1_ADDR_81 0xD2000 /* 83XX Flash locations -- occupies second 8MB region. */ #define FA_FLASH_LAYOUT_ADDR_83 (0x3F1000/4) #define FA_FLASH_LAYOUT_ADDR_28 (0x11000/4) #define NVRAM_DUAL_FCP_NVME_FLAG_OFFSET 0x196 #endif
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1