| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Lonnie Mendez | 3759 | 68.47% | 6 | 6.67% |
| Mike Isely | 536 | 9.76% | 8 | 8.89% |
| Johan Hovold | 327 | 5.96% | 18 | 20.00% |
| Greg Kroah-Hartman | 289 | 5.26% | 12 | 13.33% |
| Alan Cox | 271 | 4.94% | 10 | 11.11% |
| Robert Butora | 74 | 1.35% | 1 | 1.11% |
| Linus Torvalds (pre-git) | 54 | 0.98% | 2 | 2.22% |
| Harvey Harrison | 31 | 0.56% | 1 | 1.11% |
| Alan Stern | 29 | 0.53% | 3 | 3.33% |
| Oliver Neukum | 28 | 0.51% | 3 | 3.33% |
| Mike Frysinger | 23 | 0.42% | 2 | 2.22% |
| Jiri Slaby | 20 | 0.36% | 6 | 6.67% |
| Dmitry Shapin | 12 | 0.22% | 1 | 1.11% |
| Gustavo A. R. Silva | 4 | 0.07% | 1 | 1.11% |
| Márton Németh | 4 | 0.07% | 1 | 1.11% |
| Nishanth Aravamudan | 3 | 0.05% | 1 | 1.11% |
| Peter Hurley | 3 | 0.05% | 1 | 1.11% |
| Al Viro | 3 | 0.05% | 1 | 1.11% |
| Utkarsh Verma | 3 | 0.05% | 1 | 1.11% |
| Ilpo Järvinen | 3 | 0.05% | 1 | 1.11% |
| James Hilliard | 2 | 0.04% | 1 | 1.11% |
| Uwe Kleine-König | 2 | 0.04% | 1 | 1.11% |
| Stuart MacDonald | 2 | 0.04% | 1 | 1.11% |
| Rusty Russell | 2 | 0.04% | 1 | 1.11% |
| Steven Cole | 1 | 0.02% | 1 | 1.11% |
| Yue haibing | 1 | 0.02% | 1 | 1.11% |
| Mauro Carvalho Chehab | 1 | 0.02% | 1 | 1.11% |
| Pete Zaitcev | 1 | 0.02% | 1 | 1.11% |
| Colin Ian King | 1 | 0.02% | 1 | 1.11% |
| Jiang Jian | 1 | 0.02% | 1 | 1.11% |
| Total | 5490 | 90 |
// SPDX-License-Identifier: GPL-2.0+ /* * USB Cypress M8 driver * * Copyright (C) 2004 * Lonnie Mendez (dignome@gmail.com) * Copyright (C) 2003,2004 * Neil Whelchel (koyama@firstlight.net) * * See Documentation/usb/usb-serial.rst for more information on using this * driver * * See http://geocities.com/i0xox0i for information on this driver and the * earthmate usb device. */ /* Thanks to Neil Whelchel for writing the first cypress m8 implementation for linux. */ /* Thanks to cypress for providing references for the hid reports. */ /* Thanks to Jiang Zhang for providing links and for general help. */ /* Code originates and was built up from ftdi_sio, belkin, pl2303 and others.*/ #include <linux/kernel.h> #include <linux/errno.h> #include <linux/slab.h> #include <linux/tty.h> #include <linux/tty_driver.h> #include <linux/tty_flip.h> #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/spinlock.h> #include <linux/usb.h> #include <linux/usb/serial.h> #include <linux/serial.h> #include <linux/kfifo.h> #include <linux/delay.h> #include <linux/uaccess.h> #include <asm/unaligned.h> #include "cypress_m8.h" static bool stats; static int interval; static bool unstable_bauds; #define DRIVER_AUTHOR "Lonnie Mendez <dignome@gmail.com>, Neil Whelchel <koyama@firstlight.net>" #define DRIVER_DESC "Cypress USB to Serial Driver" /* write buffer size defines */ #define CYPRESS_BUF_SIZE 1024 static const struct usb_device_id id_table_earthmate[] = { { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) }, { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) }, { } /* Terminating entry */ }; static const struct usb_device_id id_table_cyphidcomrs232[] = { { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) }, { USB_DEVICE(VENDOR_ID_SAI, PRODUCT_ID_CYPHIDCOM) }, { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) }, { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) }, { } /* Terminating entry */ }; static const struct usb_device_id id_table_nokiaca42v2[] = { { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) }, { } /* Terminating entry */ }; static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) }, { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) }, { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) }, { USB_DEVICE(VENDOR_ID_SAI, PRODUCT_ID_CYPHIDCOM) }, { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) }, { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) }, { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, id_table_combined); enum packet_format { packet_format_1, /* b0:status, b1:payload count */ packet_format_2 /* b0[7:3]:status, b0[2:0]:payload count */ }; struct cypress_private { spinlock_t lock; /* private lock */ int chiptype; /* identifier of device, for quirks/etc */ int bytes_in; /* used for statistics */ int bytes_out; /* used for statistics */ int cmd_count; /* used for statistics */ int cmd_ctrl; /* always set this to 1 before issuing a command */ struct kfifo write_fifo; /* write fifo */ int write_urb_in_use; /* write urb in use indicator */ int write_urb_interval; /* interval to use for write urb */ int read_urb_interval; /* interval to use for read urb */ int comm_is_ok; /* true if communication is (still) ok */ __u8 line_control; /* holds dtr / rts value */ __u8 current_status; /* received from last read - info on dsr,cts,cd,ri,etc */ __u8 current_config; /* stores the current configuration byte */ __u8 rx_flags; /* throttling - used from whiteheat/ftdi_sio */ enum packet_format pkt_fmt; /* format to use for packet send / receive */ int get_cfg_unsafe; /* If true, the CYPRESS_GET_CONFIG is unsafe */ int baud_rate; /* stores current baud rate in integer form */ char prev_status; /* used for TIOCMIWAIT */ }; /* function prototypes for the Cypress USB to serial device */ static int cypress_earthmate_port_probe(struct usb_serial_port *port); static int cypress_hidcom_port_probe(struct usb_serial_port *port); static int cypress_ca42v2_port_probe(struct usb_serial_port *port); static void cypress_port_remove(struct usb_serial_port *port); static int cypress_open(struct tty_struct *tty, struct usb_serial_port *port); static void cypress_close(struct usb_serial_port *port); static void cypress_dtr_rts(struct usb_serial_port *port, int on); static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); static void cypress_send(struct usb_serial_port *port); static unsigned int cypress_write_room(struct tty_struct *tty); static void cypress_earthmate_init_termios(struct tty_struct *tty); static void cypress_set_termios(struct tty_struct *tty, struct usb_serial_port *port, const struct ktermios *old_termios); static int cypress_tiocmget(struct tty_struct *tty); static int cypress_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); static unsigned int cypress_chars_in_buffer(struct tty_struct *tty); static void cypress_throttle(struct tty_struct *tty); static void cypress_unthrottle(struct tty_struct *tty); static void cypress_set_dead(struct usb_serial_port *port); static void cypress_read_int_callback(struct urb *urb); static void cypress_write_int_callback(struct urb *urb); static struct usb_serial_driver cypress_earthmate_device = { .driver = { .owner = THIS_MODULE, .name = "earthmate", }, .description = "DeLorme Earthmate USB", .id_table = id_table_earthmate, .num_ports = 1, .port_probe = cypress_earthmate_port_probe, .port_remove = cypress_port_remove, .open = cypress_open, .close = cypress_close, .dtr_rts = cypress_dtr_rts, .write = cypress_write, .write_room = cypress_write_room, .init_termios = cypress_earthmate_init_termios, .set_termios = cypress_set_termios, .tiocmget = cypress_tiocmget, .tiocmset = cypress_tiocmset, .tiocmiwait = usb_serial_generic_tiocmiwait, .chars_in_buffer = cypress_chars_in_buffer, .throttle = cypress_throttle, .unthrottle = cypress_unthrottle, .read_int_callback = cypress_read_int_callback, .write_int_callback = cypress_write_int_callback, }; static struct usb_serial_driver cypress_hidcom_device = { .driver = { .owner = THIS_MODULE, .name = "cyphidcom", }, .description = "HID->COM RS232 Adapter", .id_table = id_table_cyphidcomrs232, .num_ports = 1, .port_probe = cypress_hidcom_port_probe, .port_remove = cypress_port_remove, .open = cypress_open, .close = cypress_close, .dtr_rts = cypress_dtr_rts, .write = cypress_write, .write_room = cypress_write_room, .set_termios = cypress_set_termios, .tiocmget = cypress_tiocmget, .tiocmset = cypress_tiocmset, .tiocmiwait = usb_serial_generic_tiocmiwait, .chars_in_buffer = cypress_chars_in_buffer, .throttle = cypress_throttle, .unthrottle = cypress_unthrottle, .read_int_callback = cypress_read_int_callback, .write_int_callback = cypress_write_int_callback, }; static struct usb_serial_driver cypress_ca42v2_device = { .driver = { .owner = THIS_MODULE, .name = "nokiaca42v2", }, .description = "Nokia CA-42 V2 Adapter", .id_table = id_table_nokiaca42v2, .num_ports = 1, .port_probe = cypress_ca42v2_port_probe, .port_remove = cypress_port_remove, .open = cypress_open, .close = cypress_close, .dtr_rts = cypress_dtr_rts, .write = cypress_write, .write_room = cypress_write_room, .set_termios = cypress_set_termios, .tiocmget = cypress_tiocmget, .tiocmset = cypress_tiocmset, .tiocmiwait = usb_serial_generic_tiocmiwait, .chars_in_buffer = cypress_chars_in_buffer, .throttle = cypress_throttle, .unthrottle = cypress_unthrottle, .read_int_callback = cypress_read_int_callback, .write_int_callback = cypress_write_int_callback, }; static struct usb_serial_driver * const serial_drivers[] = { &cypress_earthmate_device, &cypress_hidcom_device, &cypress_ca42v2_device, NULL }; /***************************************************************************** * Cypress serial helper functions *****************************************************************************/ /* FRWD Dongle hidcom needs to skip reset and speed checks */ static inline bool is_frwd(struct usb_device *dev) { return ((le16_to_cpu(dev->descriptor.idVendor) == VENDOR_ID_FRWD) && (le16_to_cpu(dev->descriptor.idProduct) == PRODUCT_ID_CYPHIDCOM_FRWD)); } static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate) { struct cypress_private *priv; priv = usb_get_serial_port_data(port); if (unstable_bauds) return new_rate; /* FRWD Dongle uses 115200 bps */ if (is_frwd(port->serial->dev)) return new_rate; /* * The general purpose firmware for the Cypress M8 allows for * a maximum speed of 57600bps (I have no idea whether DeLorme * chose to use the general purpose firmware or not), if you * need to modify this speed setting for your own project * please add your own chiptype and modify the code likewise. * The Cypress HID->COM device will work successfully up to * 115200bps (but the actual throughput is around 3kBps). */ if (port->serial->dev->speed == USB_SPEED_LOW) { /* * Mike Isely <isely@pobox.com> 2-Feb-2008: The * Cypress app note that describes this mechanism * states that the low-speed part can't handle more * than 800 bytes/sec, in which case 4800 baud is the * safest speed for a part like that. */ if (new_rate > 4800) { dev_dbg(&port->dev, "%s - failed setting baud rate, device incapable speed %d\n", __func__, new_rate); return -1; } } switch (priv->chiptype) { case CT_EARTHMATE: if (new_rate <= 600) { /* 300 and 600 baud rates are supported under * the generic firmware, but are not used with * NMEA and SiRF protocols */ dev_dbg(&port->dev, "%s - failed setting baud rate, unsupported speed of %d on Earthmate GPS\n", __func__, new_rate); return -1; } break; default: break; } return new_rate; } /* This function can either set or retrieve the current serial line settings */ static int cypress_serial_control(struct tty_struct *tty, struct usb_serial_port *port, speed_t baud_rate, int data_bits, int stop_bits, int parity_enable, int parity_type, int reset, int cypress_request_type) { int new_baudrate = 0, retval = 0, tries = 0; struct cypress_private *priv; struct device *dev = &port->dev; u8 *feature_buffer; const unsigned int feature_len = 5; unsigned long flags; priv = usb_get_serial_port_data(port); if (!priv->comm_is_ok) return -ENODEV; feature_buffer = kcalloc(feature_len, sizeof(u8), GFP_KERNEL); if (!feature_buffer) return -ENOMEM; switch (cypress_request_type) { case CYPRESS_SET_CONFIG: /* 0 means 'Hang up' so doesn't change the true bit rate */ new_baudrate = priv->baud_rate; if (baud_rate && baud_rate != priv->baud_rate) { dev_dbg(dev, "%s - baud rate is changing\n", __func__); retval = analyze_baud_rate(port, baud_rate); if (retval >= 0) { new_baudrate = retval; dev_dbg(dev, "%s - New baud rate set to %d\n", __func__, new_baudrate); } } dev_dbg(dev, "%s - baud rate is being sent as %d\n", __func__, new_baudrate); /* fill the feature_buffer with new configuration */ put_unaligned_le32(new_baudrate, feature_buffer); feature_buffer[4] |= data_bits - 5; /* assign data bits in 2 bit space ( max 3 ) */ /* 1 bit gap */ feature_buffer[4] |= (stop_bits << 3); /* assign stop bits in 1 bit space */ feature_buffer[4] |= (parity_enable << 4); /* assign parity flag in 1 bit space */ feature_buffer[4] |= (parity_type << 5); /* assign parity type in 1 bit space */ /* 1 bit gap */ feature_buffer[4] |= (reset << 7); /* assign reset at end of byte, 1 bit space */ dev_dbg(dev, "%s - device is being sent this feature report:\n", __func__); dev_dbg(dev, "%s - %02X - %02X - %02X - %02X - %02X\n", __func__, feature_buffer[0], feature_buffer[1], feature_buffer[2], feature_buffer[3], feature_buffer[4]); do { retval = usb_control_msg(port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0), HID_REQ_SET_REPORT, USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS, 0x0300, 0, feature_buffer, feature_len, 500); if (tries++ >= 3) break; } while (retval != feature_len && retval != -ENODEV); if (retval != feature_len) { dev_err(dev, "%s - failed sending serial line settings - %d\n", __func__, retval); cypress_set_dead(port); } else { spin_lock_irqsave(&priv->lock, flags); priv->baud_rate = new_baudrate; priv->current_config = feature_buffer[4]; spin_unlock_irqrestore(&priv->lock, flags); /* If we asked for a speed change encode it */ if (baud_rate) tty_encode_baud_rate(tty, new_baudrate, new_baudrate); } break; case CYPRESS_GET_CONFIG: if (priv->get_cfg_unsafe) { /* Not implemented for this device, and if we try to do it we're likely to crash the hardware. */ retval = -ENOTTY; goto out; } dev_dbg(dev, "%s - retrieving serial line settings\n", __func__); do { retval = usb_control_msg(port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0), HID_REQ_GET_REPORT, USB_DIR_IN | USB_RECIP_INTERFACE | USB_TYPE_CLASS, 0x0300, 0, feature_buffer, feature_len, 500); if (tries++ >= 3) break; } while (retval != feature_len && retval != -ENODEV); if (retval != feature_len) { dev_err(dev, "%s - failed to retrieve serial line settings - %d\n", __func__, retval); cypress_set_dead(port); goto out; } else { spin_lock_irqsave(&priv->lock, flags); /* store the config in one byte, and later use bit masks to check values */ priv->current_config = feature_buffer[4]; priv->baud_rate = get_unaligned_le32(feature_buffer); spin_unlock_irqrestore(&priv->lock, flags); } } spin_lock_irqsave(&priv->lock, flags); ++priv->cmd_count; spin_unlock_irqrestore(&priv->lock, flags); out: kfree(feature_buffer); return retval; } /* cypress_serial_control */ static void cypress_set_dead(struct usb_serial_port *port) { struct cypress_private *priv = usb_get_serial_port_data(port); unsigned long flags; spin_lock_irqsave(&priv->lock, flags); if (!priv->comm_is_ok) { spin_unlock_irqrestore(&priv->lock, flags); return; } priv->comm_is_ok = 0; spin_unlock_irqrestore(&priv->lock, flags); dev_err(&port->dev, "cypress_m8 suspending failing port %d - " "interval might be too short\n", port->port_number); } /***************************************************************************** * Cypress serial driver functions *****************************************************************************/ static int cypress_generic_port_probe(struct usb_serial_port *port) { struct usb_serial *serial = port->serial; struct cypress_private *priv; if (!port->interrupt_out_urb || !port->interrupt_in_urb) { dev_err(&port->dev, "required endpoint is missing\n"); return -ENODEV; } priv = kzalloc(sizeof(struct cypress_private), GFP_KERNEL); if (!priv) return -ENOMEM; priv->comm_is_ok = !0; spin_lock_init(&priv->lock); if (kfifo_alloc(&priv->write_fifo, CYPRESS_BUF_SIZE, GFP_KERNEL)) { kfree(priv); return -ENOMEM; } /* Skip reset for FRWD device. It is a workaound: device hangs if it receives SET_CONFIGURE in Configured state. */ if (!is_frwd(serial->dev)) usb_reset_configuration(serial->dev); priv->cmd_ctrl = 0; priv->line_control = 0; priv->rx_flags = 0; /* Default packet format setting is determined by packet size. Anything with a size larger then 9 must have a separate count field since the 3 bit count field is otherwise too small. Otherwise we can use the slightly more compact format. This is in accordance with the cypress_m8 serial converter app note. */ if (port->interrupt_out_size > 9) priv->pkt_fmt = packet_format_1; else priv->pkt_fmt = packet_format_2; if (interval > 0) { priv->write_urb_interval = interval; priv->read_urb_interval = interval; dev_dbg(&port->dev, "%s - read & write intervals forced to %d\n", __func__, interval); } else { priv->write_urb_interval = port->interrupt_out_urb->interval; priv->read_urb_interval = port->interrupt_in_urb->interval; dev_dbg(&port->dev, "%s - intervals: read=%d write=%d\n", __func__, priv->read_urb_interval, priv->write_urb_interval); } usb_set_serial_port_data(port, priv); port->port.drain_delay = 256; return 0; } static int cypress_earthmate_port_probe(struct usb_serial_port *port) { struct usb_serial *serial = port->serial; struct cypress_private *priv; int ret; ret = cypress_generic_port_probe(port); if (ret) { dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__); return ret; } priv = usb_get_serial_port_data(port); priv->chiptype = CT_EARTHMATE; /* All Earthmate devices use the separated-count packet format! Idiotic. */ priv->pkt_fmt = packet_format_1; if (serial->dev->descriptor.idProduct != cpu_to_le16(PRODUCT_ID_EARTHMATEUSB)) { /* The old original USB Earthmate seemed able to handle GET_CONFIG requests; everything they've produced since that time crashes if this command is attempted :-( */ dev_dbg(&port->dev, "%s - Marking this device as unsafe for GET_CONFIG commands\n", __func__); priv->get_cfg_unsafe = !0; } return 0; } static int cypress_hidcom_port_probe(struct usb_serial_port *port) { struct cypress_private *priv; int ret; ret = cypress_generic_port_probe(port); if (ret) { dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__); return ret; } priv = usb_get_serial_port_data(port); priv->chiptype = CT_CYPHIDCOM; return 0; } static int cypress_ca42v2_port_probe(struct usb_serial_port *port) { struct cypress_private *priv; int ret; ret = cypress_generic_port_probe(port); if (ret) { dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__); return ret; } priv = usb_get_serial_port_data(port); priv->chiptype = CT_CA42V2; return 0; } static void cypress_port_remove(struct usb_serial_port *port) { struct cypress_private *priv; priv = usb_get_serial_port_data(port); kfifo_free(&priv->write_fifo); kfree(priv); } static int cypress_open(struct tty_struct *tty, struct usb_serial_port *port) { struct cypress_private *priv = usb_get_serial_port_data(port); struct usb_serial *serial = port->serial; unsigned long flags; int result = 0; if (!priv->comm_is_ok) return -EIO; /* clear halts before open */ usb_clear_halt(serial->dev, 0x81); usb_clear_halt(serial->dev, 0x02); spin_lock_irqsave(&priv->lock, flags); /* reset read/write statistics */ priv->bytes_in = 0; priv->bytes_out = 0; priv->cmd_count = 0; priv->rx_flags = 0; spin_unlock_irqrestore(&priv->lock, flags); /* Set termios */ cypress_send(port); if (tty) cypress_set_termios(tty, port, NULL); /* setup the port and start reading from the device */ usb_fill_int_urb(port->interrupt_in_urb, serial->dev, usb_rcvintpipe(serial->dev, port->interrupt_in_endpointAddress), port->interrupt_in_urb->transfer_buffer, port->interrupt_in_urb->transfer_buffer_length, cypress_read_int_callback, port, priv->read_urb_interval); result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (result) { dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __func__, result); cypress_set_dead(port); } return result; } /* cypress_open */ static void cypress_dtr_rts(struct usb_serial_port *port, int on) { struct cypress_private *priv = usb_get_serial_port_data(port); /* drop dtr and rts */ spin_lock_irq(&priv->lock); if (on == 0) priv->line_control = 0; else priv->line_control = CONTROL_DTR | CONTROL_RTS; priv->cmd_ctrl = 1; spin_unlock_irq(&priv->lock); cypress_write(NULL, port, NULL, 0); } static void cypress_close(struct usb_serial_port *port) { struct cypress_private *priv = usb_get_serial_port_data(port); unsigned long flags; spin_lock_irqsave(&priv->lock, flags); kfifo_reset_out(&priv->write_fifo); spin_unlock_irqrestore(&priv->lock, flags); dev_dbg(&port->dev, "%s - stopping urbs\n", __func__); usb_kill_urb(port->interrupt_in_urb); usb_kill_urb(port->interrupt_out_urb); if (stats) dev_info(&port->dev, "Statistics: %d Bytes In | %d Bytes Out | %d Commands Issued\n", priv->bytes_in, priv->bytes_out, priv->cmd_count); } /* cypress_close */ static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count) { struct cypress_private *priv = usb_get_serial_port_data(port); dev_dbg(&port->dev, "%s - %d bytes\n", __func__, count); /* line control commands, which need to be executed immediately, are not put into the buffer for obvious reasons. */ if (priv->cmd_ctrl) { count = 0; goto finish; } if (!count) return count; count = kfifo_in_locked(&priv->write_fifo, buf, count, &priv->lock); finish: cypress_send(port); return count; } /* cypress_write */ static void cypress_send(struct usb_serial_port *port) { int count = 0, result, offset, actual_size; struct cypress_private *priv = usb_get_serial_port_data(port); struct device *dev = &port->dev; unsigned long flags; if (!priv->comm_is_ok) return; dev_dbg(dev, "%s - interrupt out size is %d\n", __func__, port->interrupt_out_size); spin_lock_irqsave(&priv->lock, flags); if (priv->write_urb_in_use) { dev_dbg(dev, "%s - can't write, urb in use\n", __func__); spin_unlock_irqrestore(&priv->lock, flags); return; } spin_unlock_irqrestore(&priv->lock, flags); /* clear buffer */ memset(port->interrupt_out_urb->transfer_buffer, 0, port->interrupt_out_size); spin_lock_irqsave(&priv->lock, flags); switch (priv->pkt_fmt) { default: case packet_format_1: /* this is for the CY7C64013... */ offset = 2; port->interrupt_out_buffer[0] = priv->line_control; break; case packet_format_2: /* this is for the CY7C63743... */ offset = 1; port->interrupt_out_buffer[0] = priv->line_control; break; } if (priv->line_control & CONTROL_RESET) priv->line_control &= ~CONTROL_RESET; if (priv->cmd_ctrl) { priv->cmd_count++; dev_dbg(dev, "%s - line control command being issued\n", __func__); spin_unlock_irqrestore(&priv->lock, flags); goto send; } else spin_unlock_irqrestore(&priv->lock, flags); count = kfifo_out_locked(&priv->write_fifo, &port->interrupt_out_buffer[offset], port->interrupt_out_size - offset, &priv->lock); if (count == 0) return; switch (priv->pkt_fmt) { default: case packet_format_1: port->interrupt_out_buffer[1] = count; break; case packet_format_2: port->interrupt_out_buffer[0] |= count; } dev_dbg(dev, "%s - count is %d\n", __func__, count); send: spin_lock_irqsave(&priv->lock, flags); priv->write_urb_in_use = 1; spin_unlock_irqrestore(&priv->lock, flags); if (priv->cmd_ctrl) actual_size = 1; else actual_size = count + (priv->pkt_fmt == packet_format_1 ? 2 : 1); usb_serial_debug_data(dev, __func__, port->interrupt_out_size, port->interrupt_out_urb->transfer_buffer); usb_fill_int_urb(port->interrupt_out_urb, port->serial->dev, usb_sndintpipe(port->serial->dev, port->interrupt_out_endpointAddress), port->interrupt_out_buffer, actual_size, cypress_write_int_callback, port, priv->write_urb_interval); result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC); if (result) { dev_err_console(port, "%s - failed submitting write urb, error %d\n", __func__, result); priv->write_urb_in_use = 0; cypress_set_dead(port); } spin_lock_irqsave(&priv->lock, flags); if (priv->cmd_ctrl) priv->cmd_ctrl = 0; /* do not count the line control and size bytes */ priv->bytes_out += count; spin_unlock_irqrestore(&priv->lock, flags); usb_serial_port_softint(port); } /* cypress_send */ /* returns how much space is available in the soft buffer */ static unsigned int cypress_write_room(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct cypress_private *priv = usb_get_serial_port_data(port); unsigned int room; unsigned long flags; spin_lock_irqsave(&priv->lock, flags); room = kfifo_avail(&priv->write_fifo); spin_unlock_irqrestore(&priv->lock, flags); dev_dbg(&port->dev, "%s - returns %u\n", __func__, room); return room; } static int cypress_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct cypress_private *priv = usb_get_serial_port_data(port); __u8 status, control; unsigned int result = 0; unsigned long flags; spin_lock_irqsave(&priv->lock, flags); control = priv->line_control; status = priv->current_status; spin_unlock_irqrestore(&priv->lock, flags); result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0) | ((control & CONTROL_RTS) ? TIOCM_RTS : 0) | ((status & UART_CTS) ? TIOCM_CTS : 0) | ((status & UART_DSR) ? TIOCM_DSR : 0) | ((status & UART_RI) ? TIOCM_RI : 0) | ((status & UART_CD) ? TIOCM_CD : 0); dev_dbg(&port->dev, "%s - result = %x\n", __func__, result); return result; } static int cypress_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; struct cypress_private *priv = usb_get_serial_port_data(port); unsigned long flags; spin_lock_irqsave(&priv->lock, flags); if (set & TIOCM_RTS) priv->line_control |= CONTROL_RTS; if (set & TIOCM_DTR) priv->line_control |= CONTROL_DTR; if (clear & TIOCM_RTS) priv->line_control &= ~CONTROL_RTS; if (clear & TIOCM_DTR) priv->line_control &= ~CONTROL_DTR; priv->cmd_ctrl = 1; spin_unlock_irqrestore(&priv->lock, flags); return cypress_write(tty, port, NULL, 0); } static void cypress_earthmate_init_termios(struct tty_struct *tty) { tty_encode_baud_rate(tty, 4800, 4800); } static void cypress_set_termios(struct tty_struct *tty, struct usb_serial_port *port, const struct ktermios *old_termios) { struct cypress_private *priv = usb_get_serial_port_data(port); struct device *dev = &port->dev; int data_bits, stop_bits, parity_type, parity_enable; unsigned int cflag; unsigned long flags; __u8 oldlines; int linechange = 0; /* Unsupported features need clearing */ tty->termios.c_cflag &= ~(CMSPAR|CRTSCTS); cflag = tty->termios.c_cflag; /* set number of data bits, parity, stop bits */ /* when parity is disabled the parity type bit is ignored */ /* 1 means 2 stop bits, 0 means 1 stop bit */ stop_bits = cflag & CSTOPB ? 1 : 0; if (cflag & PARENB) { parity_enable = 1; /* 1 means odd parity, 0 means even parity */ parity_type = cflag & PARODD ? 1 : 0; } else parity_enable = parity_type = 0; data_bits = tty_get_char_size(cflag); spin_lock_irqsave(&priv->lock, flags); oldlines = priv->line_control; if ((cflag & CBAUD) == B0) { /* drop dtr and rts */ dev_dbg(dev, "%s - dropping the lines, baud rate 0bps\n", __func__); priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS); } else priv->line_control = (CONTROL_DTR | CONTROL_RTS); spin_unlock_irqrestore(&priv->lock, flags); dev_dbg(dev, "%s - sending %d stop_bits, %d parity_enable, %d parity_type, %d data_bits (+5)\n", __func__, stop_bits, parity_enable, parity_type, data_bits); cypress_serial_control(tty, port, tty_get_baud_rate(tty), data_bits, stop_bits, parity_enable, parity_type, 0, CYPRESS_SET_CONFIG); /* we perform a CYPRESS_GET_CONFIG so that the current settings are * filled into the private structure this should confirm that all is * working if it returns what we just set */ cypress_serial_control(tty, port, 0, 0, 0, 0, 0, 0, CYPRESS_GET_CONFIG); /* Here we can define custom tty settings for devices; the main tty * termios flag base comes from empeg.c */ spin_lock_irqsave(&priv->lock, flags); if (priv->chiptype == CT_EARTHMATE && priv->baud_rate == 4800) { dev_dbg(dev, "Using custom termios settings for a baud rate of 4800bps.\n"); /* define custom termios settings for NMEA protocol */ tty->termios.c_iflag /* input modes - */ &= ~(IGNBRK /* disable ignore break */ | BRKINT /* disable break causes interrupt */ | PARMRK /* disable mark parity errors */ | ISTRIP /* disable clear high bit of input char */ | INLCR /* disable translate NL to CR */ | IGNCR /* disable ignore CR */ | ICRNL /* disable translate CR to NL */ | IXON); /* disable enable XON/XOFF flow control */ tty->termios.c_oflag /* output modes */ &= ~OPOST; /* disable postprocess output char */ tty->termios.c_lflag /* line discipline modes */ &= ~(ECHO /* disable echo input characters */ | ECHONL /* disable echo new line */ | ICANON /* disable erase, kill, werase, and rprnt special characters */ | ISIG /* disable interrupt, quit, and suspend special characters */ | IEXTEN); /* disable non-POSIX special characters */ } /* CT_CYPHIDCOM: Application should handle this for device */ linechange = (priv->line_control != oldlines); spin_unlock_irqrestore(&priv->lock, flags); /* if necessary, set lines */ if (linechange) { priv->cmd_ctrl = 1; cypress_write(tty, port, NULL, 0); } } /* cypress_set_termios */ /* returns amount of data still left in soft buffer */ static unsigned int cypress_chars_in_buffer(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct cypress_private *priv = usb_get_serial_port_data(port); unsigned int chars; unsigned long flags; spin_lock_irqsave(&priv->lock, flags); chars = kfifo_len(&priv->write_fifo); spin_unlock_irqrestore(&priv->lock, flags); dev_dbg(&port->dev, "%s - returns %u\n", __func__, chars); return chars; } static void cypress_throttle(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct cypress_private *priv = usb_get_serial_port_data(port); spin_lock_irq(&priv->lock); priv->rx_flags = THROTTLED; spin_unlock_irq(&priv->lock); } static void cypress_unthrottle(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; struct cypress_private *priv = usb_get_serial_port_data(port); int actually_throttled, result; spin_lock_irq(&priv->lock); actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED; priv->rx_flags = 0; spin_unlock_irq(&priv->lock); if (!priv->comm_is_ok) return; if (actually_throttled) { result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (result) { dev_err(&port->dev, "%s - failed submitting read urb, " "error %d\n", __func__, result); cypress_set_dead(port); } } } static void cypress_read_int_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; struct cypress_private *priv = usb_get_serial_port_data(port); struct device *dev = &urb->dev->dev; struct tty_struct *tty; unsigned char *data = urb->transfer_buffer; unsigned long flags; char tty_flag = TTY_NORMAL; int bytes = 0; int result; int i = 0; int status = urb->status; switch (status) { case 0: /* success */ break; case -ECONNRESET: case -ENOENT: case -ESHUTDOWN: /* precursor to disconnect so just go away */ return; case -EPIPE: /* Can't call usb_clear_halt while in_interrupt */ fallthrough; default: /* something ugly is going on... */ dev_err(dev, "%s - unexpected nonzero read status received: %d\n", __func__, status); cypress_set_dead(port); return; } spin_lock_irqsave(&priv->lock, flags); if (priv->rx_flags & THROTTLED) { dev_dbg(dev, "%s - now throttling\n", __func__); priv->rx_flags |= ACTUALLY_THROTTLED; spin_unlock_irqrestore(&priv->lock, flags); return; } spin_unlock_irqrestore(&priv->lock, flags); tty = tty_port_tty_get(&port->port); if (!tty) { dev_dbg(dev, "%s - bad tty pointer - exiting\n", __func__); return; } spin_lock_irqsave(&priv->lock, flags); result = urb->actual_length; switch (priv->pkt_fmt) { default: case packet_format_1: /* This is for the CY7C64013... */ priv->current_status = data[0] & 0xF8; bytes = data[1] + 2; i = 2; break; case packet_format_2: /* This is for the CY7C63743... */ priv->current_status = data[0] & 0xF8; bytes = (data[0] & 0x07) + 1; i = 1; break; } spin_unlock_irqrestore(&priv->lock, flags); if (result < bytes) { dev_dbg(dev, "%s - wrong packet size - received %d bytes but packet said %d bytes\n", __func__, result, bytes); goto continue_read; } usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data); spin_lock_irqsave(&priv->lock, flags); /* check to see if status has changed */ if (priv->current_status != priv->prev_status) { u8 delta = priv->current_status ^ priv->prev_status; if (delta & UART_MSR_MASK) { if (delta & UART_CTS) port->icount.cts++; if (delta & UART_DSR) port->icount.dsr++; if (delta & UART_RI) port->icount.rng++; if (delta & UART_CD) port->icount.dcd++; wake_up_interruptible(&port->port.delta_msr_wait); } priv->prev_status = priv->current_status; } spin_unlock_irqrestore(&priv->lock, flags); /* hangup, as defined in acm.c... this might be a bad place for it * though */ if (tty && !C_CLOCAL(tty) && !(priv->current_status & UART_CD)) { dev_dbg(dev, "%s - calling hangup\n", __func__); tty_hangup(tty); goto continue_read; } /* There is one error bit... I'm assuming it is a parity error * indicator as the generic firmware will set this bit to 1 if a * parity error occurs. * I can not find reference to any other error events. */ spin_lock_irqsave(&priv->lock, flags); if (priv->current_status & CYP_ERROR) { spin_unlock_irqrestore(&priv->lock, flags); tty_flag = TTY_PARITY; dev_dbg(dev, "%s - Parity Error detected\n", __func__); } else spin_unlock_irqrestore(&priv->lock, flags); /* process read if there is data other than line status */ if (bytes > i) { tty_insert_flip_string_fixed_flag(&port->port, data + i, tty_flag, bytes - i); tty_flip_buffer_push(&port->port); } spin_lock_irqsave(&priv->lock, flags); /* control and status byte(s) are also counted */ priv->bytes_in += bytes; spin_unlock_irqrestore(&priv->lock, flags); continue_read: tty_kref_put(tty); /* Continue trying to always read */ if (priv->comm_is_ok) { usb_fill_int_urb(port->interrupt_in_urb, port->serial->dev, usb_rcvintpipe(port->serial->dev, port->interrupt_in_endpointAddress), port->interrupt_in_urb->transfer_buffer, port->interrupt_in_urb->transfer_buffer_length, cypress_read_int_callback, port, priv->read_urb_interval); result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); if (result && result != -EPERM) { dev_err(dev, "%s - failed resubmitting read urb, error %d\n", __func__, result); cypress_set_dead(port); } } } /* cypress_read_int_callback */ static void cypress_write_int_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; struct cypress_private *priv = usb_get_serial_port_data(port); struct device *dev = &urb->dev->dev; int status = urb->status; switch (status) { case 0: /* success */ break; case -ECONNRESET: case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ dev_dbg(dev, "%s - urb shutting down with status: %d\n", __func__, status); priv->write_urb_in_use = 0; return; case -EPIPE: /* Cannot call usb_clear_halt while in_interrupt */ fallthrough; default: dev_err(dev, "%s - unexpected nonzero write status received: %d\n", __func__, status); cypress_set_dead(port); break; } priv->write_urb_in_use = 0; /* send any buffered data */ cypress_send(port); } module_usb_serial_driver(serial_drivers, id_table_combined); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); module_param(stats, bool, 0644); MODULE_PARM_DESC(stats, "Enable statistics or not"); module_param(interval, int, 0644); MODULE_PARM_DESC(interval, "Overrides interrupt interval"); module_param(unstable_bauds, bool, 0644); MODULE_PARM_DESC(unstable_bauds, "Allow unstable baud rates");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1