Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Dave Jones | 896 | 58.79% | 4 | 11.43% |
Wim Van Sebroeck | 266 | 17.45% | 9 | 25.71% |
Alan Cox | 123 | 8.07% | 3 | 8.57% |
Guenter Roeck | 60 | 3.94% | 1 | 2.86% |
Jiri Slaby | 52 | 3.41% | 3 | 8.57% |
Joe Perches | 42 | 2.76% | 1 | 2.86% |
Al Viro | 25 | 1.64% | 1 | 2.86% |
Benjamin Collins | 21 | 1.38% | 1 | 2.86% |
Andrew Morton | 12 | 0.79% | 1 | 2.86% |
Jingoo Han | 7 | 0.46% | 1 | 2.86% |
Kees Cook | 7 | 0.46% | 2 | 5.71% |
Arnd Bergmann | 5 | 0.33% | 1 | 2.86% |
Gustavo A. R. Silva | 2 | 0.13% | 1 | 2.86% |
Namhyung Kim | 1 | 0.07% | 1 | 2.86% |
Thomas Gleixner | 1 | 0.07% | 1 | 2.86% |
Andrey Panin | 1 | 0.07% | 1 | 2.86% |
Samuel Tardieu | 1 | 0.07% | 1 | 2.86% |
Arjan van de Ven | 1 | 0.07% | 1 | 2.86% |
Kirill Smelkov | 1 | 0.07% | 1 | 2.86% |
Total | 1524 | 35 |
// SPDX-License-Identifier: GPL-2.0-only /* * ALi M7101 PMU Computer Watchdog Timer driver * * Based on w83877f_wdt.c by Scott Jennings <linuxdrivers@oro.net> * and the Cobalt kernel WDT timer driver by Tim Hockin * <thockin@cobaltnet.com> * * (c)2002 Steve Hill <steve@navaho.co.uk> * * This WDT driver is different from most other Linux WDT * drivers in that the driver will ping the watchdog by itself, * because this particular WDT has a very short timeout (1.6 * seconds) and it would be insane to count on any userspace * daemon always getting scheduled within that time frame. * * Additions: * Aug 23, 2004 - Added use_gpio module parameter for use on revision a1d PMUs * found on very old cobalt hardware. * -- Mike Waychison <michael.waychison@sun.com> */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/types.h> #include <linux/timer.h> #include <linux/miscdevice.h> #include <linux/watchdog.h> #include <linux/ioport.h> #include <linux/notifier.h> #include <linux/reboot.h> #include <linux/init.h> #include <linux/fs.h> #include <linux/pci.h> #include <linux/io.h> #include <linux/uaccess.h> #define WDT_ENABLE 0x9C #define WDT_DISABLE 0x8C #define ALI_7101_WDT 0x92 #define ALI_7101_GPIO 0x7D #define ALI_7101_GPIO_O 0x7E #define ALI_WDT_ARM 0x01 /* * We're going to use a 1 second timeout. * If we reset the watchdog every ~250ms we should be safe. */ #define WDT_INTERVAL (HZ/4+1) /* * We must not require too good response from the userspace daemon. * Here we require the userspace daemon to send us a heartbeat * char to /dev/watchdog every 30 seconds. */ #define WATCHDOG_TIMEOUT 30 /* 30 sec default timeout */ /* in seconds, will be multiplied by HZ to get seconds to wait for a ping */ static int timeout = WATCHDOG_TIMEOUT; module_param(timeout, int, 0); MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (1<=timeout<=3600, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); static int use_gpio; /* Use the pic (for a1d revision alim7101) */ module_param(use_gpio, int, 0); MODULE_PARM_DESC(use_gpio, "Use the gpio watchdog (required by old cobalt boards)."); static void wdt_timer_ping(struct timer_list *); static DEFINE_TIMER(timer, wdt_timer_ping); static unsigned long next_heartbeat; static unsigned long wdt_is_open; static char wdt_expect_close; static struct pci_dev *alim7101_pmu; static bool nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); /* * Whack the dog */ static void wdt_timer_ping(struct timer_list *unused) { /* If we got a heartbeat pulse within the WDT_US_INTERVAL * we agree to ping the WDT */ char tmp; if (time_before(jiffies, next_heartbeat)) { /* Ping the WDT (this is actually a disarm/arm sequence) */ pci_read_config_byte(alim7101_pmu, 0x92, &tmp); pci_write_config_byte(alim7101_pmu, ALI_7101_WDT, (tmp & ~ALI_WDT_ARM)); pci_write_config_byte(alim7101_pmu, ALI_7101_WDT, (tmp | ALI_WDT_ARM)); if (use_gpio) { pci_read_config_byte(alim7101_pmu, ALI_7101_GPIO_O, &tmp); pci_write_config_byte(alim7101_pmu, ALI_7101_GPIO_O, tmp | 0x20); pci_write_config_byte(alim7101_pmu, ALI_7101_GPIO_O, tmp & ~0x20); } } else { pr_warn("Heartbeat lost! Will not ping the watchdog\n"); } /* Re-set the timer interval */ mod_timer(&timer, jiffies + WDT_INTERVAL); } /* * Utility routines */ static void wdt_change(int writeval) { char tmp; pci_read_config_byte(alim7101_pmu, ALI_7101_WDT, &tmp); if (writeval == WDT_ENABLE) { pci_write_config_byte(alim7101_pmu, ALI_7101_WDT, (tmp | ALI_WDT_ARM)); if (use_gpio) { pci_read_config_byte(alim7101_pmu, ALI_7101_GPIO_O, &tmp); pci_write_config_byte(alim7101_pmu, ALI_7101_GPIO_O, tmp & ~0x20); } } else { pci_write_config_byte(alim7101_pmu, ALI_7101_WDT, (tmp & ~ALI_WDT_ARM)); if (use_gpio) { pci_read_config_byte(alim7101_pmu, ALI_7101_GPIO_O, &tmp); pci_write_config_byte(alim7101_pmu, ALI_7101_GPIO_O, tmp | 0x20); } } } static void wdt_startup(void) { next_heartbeat = jiffies + (timeout * HZ); /* We must enable before we kick off the timer in case the timer occurs as we ping it */ wdt_change(WDT_ENABLE); /* Start the timer */ mod_timer(&timer, jiffies + WDT_INTERVAL); pr_info("Watchdog timer is now enabled\n"); } static void wdt_turnoff(void) { /* Stop the timer */ del_timer_sync(&timer); wdt_change(WDT_DISABLE); pr_info("Watchdog timer is now disabled...\n"); } static void wdt_keepalive(void) { /* user land ping */ next_heartbeat = jiffies + (timeout * HZ); } /* * /dev/watchdog handling */ static ssize_t fop_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) { /* See if we got the magic character 'V' and reload the timer */ if (count) { if (!nowayout) { size_t ofs; /* note: just in case someone wrote the magic character * five months ago... */ wdt_expect_close = 0; /* now scan */ for (ofs = 0; ofs != count; ofs++) { char c; if (get_user(c, buf + ofs)) return -EFAULT; if (c == 'V') wdt_expect_close = 42; } } /* someone wrote to us, we should restart timer */ wdt_keepalive(); } return count; } static int fop_open(struct inode *inode, struct file *file) { /* Just in case we're already talking to someone... */ if (test_and_set_bit(0, &wdt_is_open)) return -EBUSY; /* Good, fire up the show */ wdt_startup(); return stream_open(inode, file); } static int fop_close(struct inode *inode, struct file *file) { if (wdt_expect_close == 42) wdt_turnoff(); else { /* wim: shouldn't there be a: del_timer(&timer); */ pr_crit("device file closed unexpectedly. Will not stop the WDT!\n"); } clear_bit(0, &wdt_is_open); wdt_expect_close = 0; return 0; } static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; static const struct watchdog_info ident = { .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE, .firmware_version = 1, .identity = "ALiM7101", }; switch (cmd) { case WDIOC_GETSUPPORT: return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: return put_user(0, p); case WDIOC_SETOPTIONS: { int new_options, retval = -EINVAL; if (get_user(new_options, p)) return -EFAULT; if (new_options & WDIOS_DISABLECARD) { wdt_turnoff(); retval = 0; } if (new_options & WDIOS_ENABLECARD) { wdt_startup(); retval = 0; } return retval; } case WDIOC_KEEPALIVE: wdt_keepalive(); return 0; case WDIOC_SETTIMEOUT: { int new_timeout; if (get_user(new_timeout, p)) return -EFAULT; /* arbitrary upper limit */ if (new_timeout < 1 || new_timeout > 3600) return -EINVAL; timeout = new_timeout; wdt_keepalive(); } fallthrough; case WDIOC_GETTIMEOUT: return put_user(timeout, p); default: return -ENOTTY; } } static const struct file_operations wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = fop_write, .open = fop_open, .release = fop_close, .unlocked_ioctl = fop_ioctl, .compat_ioctl = compat_ptr_ioctl, }; static struct miscdevice wdt_miscdev = { .minor = WATCHDOG_MINOR, .name = "watchdog", .fops = &wdt_fops, }; static int wdt_restart_handle(struct notifier_block *this, unsigned long mode, void *cmd) { /* * Cobalt devices have no way of rebooting themselves other * than getting the watchdog to pull reset, so we restart the * watchdog on reboot with no heartbeat. */ wdt_change(WDT_ENABLE); /* loop until the watchdog fires */ while (true) ; return NOTIFY_DONE; } static struct notifier_block wdt_restart_handler = { .notifier_call = wdt_restart_handle, .priority = 128, }; /* * Notifier for system down */ static int wdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused) { if (code == SYS_DOWN || code == SYS_HALT) wdt_turnoff(); return NOTIFY_DONE; } /* * The WDT needs to learn about soft shutdowns in order to * turn the timebomb registers off. */ static struct notifier_block wdt_notifier = { .notifier_call = wdt_notify_sys, }; static void __exit alim7101_wdt_unload(void) { wdt_turnoff(); /* Deregister */ misc_deregister(&wdt_miscdev); unregister_reboot_notifier(&wdt_notifier); unregister_restart_handler(&wdt_restart_handler); pci_dev_put(alim7101_pmu); } static int __init alim7101_wdt_init(void) { int rc = -EBUSY; struct pci_dev *ali1543_south; char tmp; pr_info("Steve Hill <steve@navaho.co.uk>\n"); alim7101_pmu = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101, NULL); if (!alim7101_pmu) { pr_info("ALi M7101 PMU not present - WDT not set\n"); return -EBUSY; } /* Set the WDT in the PMU to 1 second */ pci_write_config_byte(alim7101_pmu, ALI_7101_WDT, 0x02); ali1543_south = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL); if (!ali1543_south) { pr_info("ALi 1543 South-Bridge not present - WDT not set\n"); goto err_out; } pci_read_config_byte(ali1543_south, 0x5e, &tmp); pci_dev_put(ali1543_south); if ((tmp & 0x1e) == 0x00) { if (!use_gpio) { pr_info("Detected old alim7101 revision 'a1d'. If this is a cobalt board, set the 'use_gpio' module parameter.\n"); goto err_out; } nowayout = 1; } else if ((tmp & 0x1e) != 0x12 && (tmp & 0x1e) != 0x00) { pr_info("ALi 1543 South-Bridge does not have the correct revision number (???1001?) - WDT not set\n"); goto err_out; } if (timeout < 1 || timeout > 3600) { /* arbitrary upper limit */ timeout = WATCHDOG_TIMEOUT; pr_info("timeout value must be 1 <= x <= 3600, using %d\n", timeout); } rc = register_reboot_notifier(&wdt_notifier); if (rc) { pr_err("cannot register reboot notifier (err=%d)\n", rc); goto err_out; } rc = register_restart_handler(&wdt_restart_handler); if (rc) { pr_err("cannot register restart handler (err=%d)\n", rc); goto err_out_reboot; } rc = misc_register(&wdt_miscdev); if (rc) { pr_err("cannot register miscdev on minor=%d (err=%d)\n", wdt_miscdev.minor, rc); goto err_out_restart; } if (nowayout) __module_get(THIS_MODULE); pr_info("WDT driver for ALi M7101 initialised. timeout=%d sec (nowayout=%d)\n", timeout, nowayout); return 0; err_out_restart: unregister_restart_handler(&wdt_restart_handler); err_out_reboot: unregister_reboot_notifier(&wdt_notifier); err_out: pci_dev_put(alim7101_pmu); return rc; } module_init(alim7101_wdt_init); module_exit(alim7101_wdt_unload); static const struct pci_device_id alim7101_pci_tbl[] __used = { { PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533) }, { PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101) }, { } }; MODULE_DEVICE_TABLE(pci, alim7101_pci_tbl); MODULE_AUTHOR("Steve Hill"); MODULE_DESCRIPTION("ALi M7101 PMU Computer Watchdog Timer driver"); MODULE_LICENSE("GPL");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1