| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Alessandro Rubini | 1155 | 62.20% | 1 | 12.50% |
| Davide Ciminaghi | 700 | 37.70% | 6 | 75.00% |
| Thomas Gleixner | 2 | 0.11% | 1 | 12.50% |
| Total | 1857 | 8 |
/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (c) 2009-2011 Wind River Systems, Inc. * Copyright (c) 2011 ST Microelectronics (Alessandro Rubini) * * The STMicroelectronics ConneXt (STA2X11) chip has several unrelated * functions in one PCI endpoint functions. This driver simply * registers the platform devices in this iomemregion and exports a few * functions to access common registers */ #ifndef __STA2X11_MFD_H #define __STA2X11_MFD_H #include <linux/types.h> #include <linux/pci.h> enum sta2x11_mfd_plat_dev { sta2x11_sctl = 0, sta2x11_gpio, sta2x11_scr, sta2x11_time, sta2x11_apbreg, sta2x11_apb_soc_regs, sta2x11_vic, sta2x11_n_mfd_plat_devs, }; #define STA2X11_MFD_SCTL_NAME "sta2x11-sctl" #define STA2X11_MFD_GPIO_NAME "sta2x11-gpio" #define STA2X11_MFD_SCR_NAME "sta2x11-scr" #define STA2X11_MFD_TIME_NAME "sta2x11-time" #define STA2X11_MFD_APBREG_NAME "sta2x11-apbreg" #define STA2X11_MFD_APB_SOC_REGS_NAME "sta2x11-apb-soc-regs" #define STA2X11_MFD_VIC_NAME "sta2x11-vic" extern u32 __sta2x11_mfd_mask(struct pci_dev *, u32, u32, u32, enum sta2x11_mfd_plat_dev); /* * The MFD PCI block includes the GPIO peripherals and other register blocks. * For GPIO, we have 32*4 bits (I use "gsta" for "gpio sta2x11".) */ #define GSTA_GPIO_PER_BLOCK 32 #define GSTA_NR_BLOCKS 4 #define GSTA_NR_GPIO (GSTA_GPIO_PER_BLOCK * GSTA_NR_BLOCKS) /* Pinconfig is set by the board definition: altfunc, pull-up, pull-down */ struct sta2x11_gpio_pdata { unsigned pinconfig[GSTA_NR_GPIO]; }; /* Macros below lifted from sh_pfc.h, with minor differences */ #define PINMUX_TYPE_NONE 0 #define PINMUX_TYPE_FUNCTION 1 #define PINMUX_TYPE_OUTPUT_LOW 2 #define PINMUX_TYPE_OUTPUT_HIGH 3 #define PINMUX_TYPE_INPUT 4 #define PINMUX_TYPE_INPUT_PULLUP 5 #define PINMUX_TYPE_INPUT_PULLDOWN 6 /* Give names to GPIO pins, like PXA does, taken from the manual */ #define STA2X11_GPIO0 0 #define STA2X11_GPIO1 1 #define STA2X11_GPIO2 2 #define STA2X11_GPIO3 3 #define STA2X11_GPIO4 4 #define STA2X11_GPIO5 5 #define STA2X11_GPIO6 6 #define STA2X11_GPIO7 7 #define STA2X11_GPIO8_RGBOUT_RED7 8 #define STA2X11_GPIO9_RGBOUT_RED6 9 #define STA2X11_GPIO10_RGBOUT_RED5 10 #define STA2X11_GPIO11_RGBOUT_RED4 11 #define STA2X11_GPIO12_RGBOUT_RED3 12 #define STA2X11_GPIO13_RGBOUT_RED2 13 #define STA2X11_GPIO14_RGBOUT_RED1 14 #define STA2X11_GPIO15_RGBOUT_RED0 15 #define STA2X11_GPIO16_RGBOUT_GREEN7 16 #define STA2X11_GPIO17_RGBOUT_GREEN6 17 #define STA2X11_GPIO18_RGBOUT_GREEN5 18 #define STA2X11_GPIO19_RGBOUT_GREEN4 19 #define STA2X11_GPIO20_RGBOUT_GREEN3 20 #define STA2X11_GPIO21_RGBOUT_GREEN2 21 #define STA2X11_GPIO22_RGBOUT_GREEN1 22 #define STA2X11_GPIO23_RGBOUT_GREEN0 23 #define STA2X11_GPIO24_RGBOUT_BLUE7 24 #define STA2X11_GPIO25_RGBOUT_BLUE6 25 #define STA2X11_GPIO26_RGBOUT_BLUE5 26 #define STA2X11_GPIO27_RGBOUT_BLUE4 27 #define STA2X11_GPIO28_RGBOUT_BLUE3 28 #define STA2X11_GPIO29_RGBOUT_BLUE2 29 #define STA2X11_GPIO30_RGBOUT_BLUE1 30 #define STA2X11_GPIO31_RGBOUT_BLUE0 31 #define STA2X11_GPIO32_RGBOUT_VSYNCH 32 #define STA2X11_GPIO33_RGBOUT_HSYNCH 33 #define STA2X11_GPIO34_RGBOUT_DEN 34 #define STA2X11_GPIO35_ETH_CRS_DV 35 #define STA2X11_GPIO36_ETH_TXD1 36 #define STA2X11_GPIO37_ETH_TXD0 37 #define STA2X11_GPIO38_ETH_TX_EN 38 #define STA2X11_GPIO39_MDIO 39 #define STA2X11_GPIO40_ETH_REF_CLK 40 #define STA2X11_GPIO41_ETH_RXD1 41 #define STA2X11_GPIO42_ETH_RXD0 42 #define STA2X11_GPIO43_MDC 43 #define STA2X11_GPIO44_CAN_TX 44 #define STA2X11_GPIO45_CAN_RX 45 #define STA2X11_GPIO46_MLB_DAT 46 #define STA2X11_GPIO47_MLB_SIG 47 #define STA2X11_GPIO48_SPI0_CLK 48 #define STA2X11_GPIO49_SPI0_TXD 49 #define STA2X11_GPIO50_SPI0_RXD 50 #define STA2X11_GPIO51_SPI0_FRM 51 #define STA2X11_GPIO52_SPI1_CLK 52 #define STA2X11_GPIO53_SPI1_TXD 53 #define STA2X11_GPIO54_SPI1_RXD 54 #define STA2X11_GPIO55_SPI1_FRM 55 #define STA2X11_GPIO56_SPI2_CLK 56 #define STA2X11_GPIO57_SPI2_TXD 57 #define STA2X11_GPIO58_SPI2_RXD 58 #define STA2X11_GPIO59_SPI2_FRM 59 #define STA2X11_GPIO60_I2C0_SCL 60 #define STA2X11_GPIO61_I2C0_SDA 61 #define STA2X11_GPIO62_I2C1_SCL 62 #define STA2X11_GPIO63_I2C1_SDA 63 #define STA2X11_GPIO64_I2C2_SCL 64 #define STA2X11_GPIO65_I2C2_SDA 65 #define STA2X11_GPIO66_I2C3_SCL 66 #define STA2X11_GPIO67_I2C3_SDA 67 #define STA2X11_GPIO68_MSP0_RCK 68 #define STA2X11_GPIO69_MSP0_RXD 69 #define STA2X11_GPIO70_MSP0_RFS 70 #define STA2X11_GPIO71_MSP0_TCK 71 #define STA2X11_GPIO72_MSP0_TXD 72 #define STA2X11_GPIO73_MSP0_TFS 73 #define STA2X11_GPIO74_MSP0_SCK 74 #define STA2X11_GPIO75_MSP1_CK 75 #define STA2X11_GPIO76_MSP1_RXD 76 #define STA2X11_GPIO77_MSP1_FS 77 #define STA2X11_GPIO78_MSP1_TXD 78 #define STA2X11_GPIO79_MSP2_CK 79 #define STA2X11_GPIO80_MSP2_RXD 80 #define STA2X11_GPIO81_MSP2_FS 81 #define STA2X11_GPIO82_MSP2_TXD 82 #define STA2X11_GPIO83_MSP3_CK 83 #define STA2X11_GPIO84_MSP3_RXD 84 #define STA2X11_GPIO85_MSP3_FS 85 #define STA2X11_GPIO86_MSP3_TXD 86 #define STA2X11_GPIO87_MSP4_CK 87 #define STA2X11_GPIO88_MSP4_RXD 88 #define STA2X11_GPIO89_MSP4_FS 89 #define STA2X11_GPIO90_MSP4_TXD 90 #define STA2X11_GPIO91_MSP5_CK 91 #define STA2X11_GPIO92_MSP5_RXD 92 #define STA2X11_GPIO93_MSP5_FS 93 #define STA2X11_GPIO94_MSP5_TXD 94 #define STA2X11_GPIO95_SDIO3_DAT3 95 #define STA2X11_GPIO96_SDIO3_DAT2 96 #define STA2X11_GPIO97_SDIO3_DAT1 97 #define STA2X11_GPIO98_SDIO3_DAT0 98 #define STA2X11_GPIO99_SDIO3_CLK 99 #define STA2X11_GPIO100_SDIO3_CMD 100 #define STA2X11_GPIO101 101 #define STA2X11_GPIO102 102 #define STA2X11_GPIO103 103 #define STA2X11_GPIO104 104 #define STA2X11_GPIO105_SDIO2_DAT3 105 #define STA2X11_GPIO106_SDIO2_DAT2 106 #define STA2X11_GPIO107_SDIO2_DAT1 107 #define STA2X11_GPIO108_SDIO2_DAT0 108 #define STA2X11_GPIO109_SDIO2_CLK 109 #define STA2X11_GPIO110_SDIO2_CMD 110 #define STA2X11_GPIO111 111 #define STA2X11_GPIO112 112 #define STA2X11_GPIO113 113 #define STA2X11_GPIO114 114 #define STA2X11_GPIO115_SDIO1_DAT3 115 #define STA2X11_GPIO116_SDIO1_DAT2 116 #define STA2X11_GPIO117_SDIO1_DAT1 117 #define STA2X11_GPIO118_SDIO1_DAT0 118 #define STA2X11_GPIO119_SDIO1_CLK 119 #define STA2X11_GPIO120_SDIO1_CMD 120 #define STA2X11_GPIO121 121 #define STA2X11_GPIO122 122 #define STA2X11_GPIO123 123 #define STA2X11_GPIO124 124 #define STA2X11_GPIO125_UART2_TXD 125 #define STA2X11_GPIO126_UART2_RXD 126 #define STA2X11_GPIO127_UART3_TXD 127 /* * The APB bridge has its own registers, needed by our users as well. * They are accessed with the following read/mask/write function. */ static inline u32 sta2x11_apbreg_mask(struct pci_dev *pdev, u32 reg, u32 mask, u32 val) { return __sta2x11_mfd_mask(pdev, reg, mask, val, sta2x11_apbreg); } /* CAN and MLB */ #define APBREG_BSR 0x00 /* Bridge Status Reg */ #define APBREG_PAER 0x08 /* Peripherals Address Error Reg */ #define APBREG_PWAC 0x20 /* Peripheral Write Access Control reg */ #define APBREG_PRAC 0x40 /* Peripheral Read Access Control reg */ #define APBREG_PCG 0x60 /* Peripheral Clock Gating Reg */ #define APBREG_PUR 0x80 /* Peripheral Under Reset Reg */ #define APBREG_EMU_PCG 0xA0 /* Emulator Peripheral Clock Gating Reg */ #define APBREG_CAN (1 << 1) #define APBREG_MLB (1 << 3) /* SARAC */ #define APBREG_BSR_SARAC 0x100 /* Bridge Status Reg */ #define APBREG_PAER_SARAC 0x108 /* Peripherals Address Error Reg */ #define APBREG_PWAC_SARAC 0x120 /* Peripheral Write Access Control reg */ #define APBREG_PRAC_SARAC 0x140 /* Peripheral Read Access Control reg */ #define APBREG_PCG_SARAC 0x160 /* Peripheral Clock Gating Reg */ #define APBREG_PUR_SARAC 0x180 /* Peripheral Under Reset Reg */ #define APBREG_EMU_PCG_SARAC 0x1A0 /* Emulator Peripheral Clock Gating Reg */ #define APBREG_SARAC (1 << 2) /* * The system controller has its own registers. Some of these are accessed * by out users as well, using the following read/mask/write/function */ static inline u32 sta2x11_sctl_mask(struct pci_dev *pdev, u32 reg, u32 mask, u32 val) { return __sta2x11_mfd_mask(pdev, reg, mask, val, sta2x11_sctl); } #define SCTL_SCCTL 0x00 /* System controller control register */ #define SCTL_ARMCFG 0x04 /* ARM configuration register */ #define SCTL_SCPLLCTL 0x08 /* PLL control status register */ #define SCTL_SCPLLCTL_AUDIO_PLL_PD BIT(1) #define SCTL_SCPLLCTL_FRAC_CONTROL BIT(3) #define SCTL_SCPLLCTL_STRB_BYPASS BIT(6) #define SCTL_SCPLLCTL_STRB_INPUT BIT(8) #define SCTL_SCPLLFCTRL 0x0c /* PLL frequency control register */ #define SCTL_SCPLLFCTRL_AUDIO_PLL_NDIV_MASK 0xff #define SCTL_SCPLLFCTRL_AUDIO_PLL_NDIV_SHIFT 10 #define SCTL_SCPLLFCTRL_AUDIO_PLL_IDF_MASK 7 #define SCTL_SCPLLFCTRL_AUDIO_PLL_IDF_SHIFT 21 #define SCTL_SCPLLFCTRL_AUDIO_PLL_ODF_MASK 7 #define SCTL_SCPLLFCTRL_AUDIO_PLL_ODF_SHIFT 18 #define SCTL_SCPLLFCTRL_DITHER_DISABLE_MASK 0x03 #define SCTL_SCPLLFCTRL_DITHER_DISABLE_SHIFT 4 #define SCTL_SCRESFRACT 0x10 /* PLL fractional input register */ #define SCTL_SCRESFRACT_MASK 0x0000ffff #define SCTL_SCRESCTRL1 0x14 /* Peripheral reset control 1 */ #define SCTL_SCRESXTRL2 0x18 /* Peripheral reset control 2 */ #define SCTL_SCPEREN0 0x1c /* Peripheral clock enable register 0 */ #define SCTL_SCPEREN1 0x20 /* Peripheral clock enable register 1 */ #define SCTL_SCPEREN2 0x24 /* Peripheral clock enable register 2 */ #define SCTL_SCGRST 0x28 /* Peripheral global reset */ #define SCTL_SCPCIECSBRST 0x2c /* PCIe PAB CSB reset status register */ #define SCTL_SCPCIPMCR1 0x30 /* PCI power management control 1 */ #define SCTL_SCPCIPMCR2 0x34 /* PCI power management control 2 */ #define SCTL_SCPCIPMSR1 0x38 /* PCI power management status 1 */ #define SCTL_SCPCIPMSR2 0x3c /* PCI power management status 2 */ #define SCTL_SCPCIPMSR3 0x40 /* PCI power management status 3 */ #define SCTL_SCINTREN 0x44 /* Interrupt enable */ #define SCTL_SCRISR 0x48 /* RAW interrupt status */ #define SCTL_SCCLKSTAT0 0x4c /* Peripheral clocks status 0 */ #define SCTL_SCCLKSTAT1 0x50 /* Peripheral clocks status 1 */ #define SCTL_SCCLKSTAT2 0x54 /* Peripheral clocks status 2 */ #define SCTL_SCRSTSTA 0x58 /* Reset status register */ #define SCTL_SCRESCTRL1_USB_PHY_POR (1 << 0) #define SCTL_SCRESCTRL1_USB_OTG (1 << 1) #define SCTL_SCRESCTRL1_USB_HRST (1 << 2) #define SCTL_SCRESCTRL1_USB_PHY_HOST (1 << 3) #define SCTL_SCRESCTRL1_SATAII (1 << 4) #define SCTL_SCRESCTRL1_VIP (1 << 5) #define SCTL_SCRESCTRL1_PER_MMC0 (1 << 6) #define SCTL_SCRESCTRL1_PER_MMC1 (1 << 7) #define SCTL_SCRESCTRL1_PER_GPIO0 (1 << 8) #define SCTL_SCRESCTRL1_PER_GPIO1 (1 << 9) #define SCTL_SCRESCTRL1_PER_GPIO2 (1 << 10) #define SCTL_SCRESCTRL1_PER_GPIO3 (1 << 11) #define SCTL_SCRESCTRL1_PER_MTU0 (1 << 12) #define SCTL_SCRESCTRL1_KER_SPI0 (1 << 13) #define SCTL_SCRESCTRL1_KER_SPI1 (1 << 14) #define SCTL_SCRESCTRL1_KER_SPI2 (1 << 15) #define SCTL_SCRESCTRL1_KER_MCI0 (1 << 16) #define SCTL_SCRESCTRL1_KER_MCI1 (1 << 17) #define SCTL_SCRESCTRL1_PRE_HSI2C0 (1 << 18) #define SCTL_SCRESCTRL1_PER_HSI2C1 (1 << 19) #define SCTL_SCRESCTRL1_PER_HSI2C2 (1 << 20) #define SCTL_SCRESCTRL1_PER_HSI2C3 (1 << 21) #define SCTL_SCRESCTRL1_PER_MSP0 (1 << 22) #define SCTL_SCRESCTRL1_PER_MSP1 (1 << 23) #define SCTL_SCRESCTRL1_PER_MSP2 (1 << 24) #define SCTL_SCRESCTRL1_PER_MSP3 (1 << 25) #define SCTL_SCRESCTRL1_PER_MSP4 (1 << 26) #define SCTL_SCRESCTRL1_PER_MSP5 (1 << 27) #define SCTL_SCRESCTRL1_PER_MMC (1 << 28) #define SCTL_SCRESCTRL1_KER_MSP0 (1 << 29) #define SCTL_SCRESCTRL1_KER_MSP1 (1 << 30) #define SCTL_SCRESCTRL1_KER_MSP2 (1 << 31) #define SCTL_SCPEREN0_UART0 (1 << 0) #define SCTL_SCPEREN0_UART1 (1 << 1) #define SCTL_SCPEREN0_UART2 (1 << 2) #define SCTL_SCPEREN0_UART3 (1 << 3) #define SCTL_SCPEREN0_MSP0 (1 << 4) #define SCTL_SCPEREN0_MSP1 (1 << 5) #define SCTL_SCPEREN0_MSP2 (1 << 6) #define SCTL_SCPEREN0_MSP3 (1 << 7) #define SCTL_SCPEREN0_MSP4 (1 << 8) #define SCTL_SCPEREN0_MSP5 (1 << 9) #define SCTL_SCPEREN0_SPI0 (1 << 10) #define SCTL_SCPEREN0_SPI1 (1 << 11) #define SCTL_SCPEREN0_SPI2 (1 << 12) #define SCTL_SCPEREN0_I2C0 (1 << 13) #define SCTL_SCPEREN0_I2C1 (1 << 14) #define SCTL_SCPEREN0_I2C2 (1 << 15) #define SCTL_SCPEREN0_I2C3 (1 << 16) #define SCTL_SCPEREN0_SVDO_LVDS (1 << 17) #define SCTL_SCPEREN0_USB_HOST (1 << 18) #define SCTL_SCPEREN0_USB_OTG (1 << 19) #define SCTL_SCPEREN0_MCI0 (1 << 20) #define SCTL_SCPEREN0_MCI1 (1 << 21) #define SCTL_SCPEREN0_MCI2 (1 << 22) #define SCTL_SCPEREN0_MCI3 (1 << 23) #define SCTL_SCPEREN0_SATA (1 << 24) #define SCTL_SCPEREN0_ETHERNET (1 << 25) #define SCTL_SCPEREN0_VIC (1 << 26) #define SCTL_SCPEREN0_DMA_AUDIO (1 << 27) #define SCTL_SCPEREN0_DMA_SOC (1 << 28) #define SCTL_SCPEREN0_RAM (1 << 29) #define SCTL_SCPEREN0_VIP (1 << 30) #define SCTL_SCPEREN0_ARM (1 << 31) #define SCTL_SCPEREN1_UART0 (1 << 0) #define SCTL_SCPEREN1_UART1 (1 << 1) #define SCTL_SCPEREN1_UART2 (1 << 2) #define SCTL_SCPEREN1_UART3 (1 << 3) #define SCTL_SCPEREN1_MSP0 (1 << 4) #define SCTL_SCPEREN1_MSP1 (1 << 5) #define SCTL_SCPEREN1_MSP2 (1 << 6) #define SCTL_SCPEREN1_MSP3 (1 << 7) #define SCTL_SCPEREN1_MSP4 (1 << 8) #define SCTL_SCPEREN1_MSP5 (1 << 9) #define SCTL_SCPEREN1_SPI0 (1 << 10) #define SCTL_SCPEREN1_SPI1 (1 << 11) #define SCTL_SCPEREN1_SPI2 (1 << 12) #define SCTL_SCPEREN1_I2C0 (1 << 13) #define SCTL_SCPEREN1_I2C1 (1 << 14) #define SCTL_SCPEREN1_I2C2 (1 << 15) #define SCTL_SCPEREN1_I2C3 (1 << 16) #define SCTL_SCPEREN1_USB_PHY (1 << 17) /* * APB-SOC registers */ static inline u32 sta2x11_apb_soc_regs_mask(struct pci_dev *pdev, u32 reg, u32 mask, u32 val) { return __sta2x11_mfd_mask(pdev, reg, mask, val, sta2x11_apb_soc_regs); } #define PCIE_EP1_FUNC3_0_INTR_REG 0x000 #define PCIE_EP1_FUNC7_4_INTR_REG 0x004 #define PCIE_EP2_FUNC3_0_INTR_REG 0x008 #define PCIE_EP2_FUNC7_4_INTR_REG 0x00c #define PCIE_EP3_FUNC3_0_INTR_REG 0x010 #define PCIE_EP3_FUNC7_4_INTR_REG 0x014 #define PCIE_EP4_FUNC3_0_INTR_REG 0x018 #define PCIE_EP4_FUNC7_4_INTR_REG 0x01c #define PCIE_INTR_ENABLE0_REG 0x020 #define PCIE_INTR_ENABLE1_REG 0x024 #define PCIE_EP1_FUNC_TC_REG 0x028 #define PCIE_EP2_FUNC_TC_REG 0x02c #define PCIE_EP3_FUNC_TC_REG 0x030 #define PCIE_EP4_FUNC_TC_REG 0x034 #define PCIE_EP1_FUNC_F_REG 0x038 #define PCIE_EP2_FUNC_F_REG 0x03c #define PCIE_EP3_FUNC_F_REG 0x040 #define PCIE_EP4_FUNC_F_REG 0x044 #define PCIE_PAB_AMBA_SW_RST_REG 0x048 #define PCIE_PM_STATUS_0_PORT_0_4 0x04c #define PCIE_PM_STATUS_7_0_EP1 0x050 #define PCIE_PM_STATUS_7_0_EP2 0x054 #define PCIE_PM_STATUS_7_0_EP3 0x058 #define PCIE_PM_STATUS_7_0_EP4 0x05c #define PCIE_DEV_ID_0_EP1_REG 0x060 #define PCIE_CC_REV_ID_0_EP1_REG 0x064 #define PCIE_DEV_ID_1_EP1_REG 0x068 #define PCIE_CC_REV_ID_1_EP1_REG 0x06c #define PCIE_DEV_ID_2_EP1_REG 0x070 #define PCIE_CC_REV_ID_2_EP1_REG 0x074 #define PCIE_DEV_ID_3_EP1_REG 0x078 #define PCIE_CC_REV_ID_3_EP1_REG 0x07c #define PCIE_DEV_ID_4_EP1_REG 0x080 #define PCIE_CC_REV_ID_4_EP1_REG 0x084 #define PCIE_DEV_ID_5_EP1_REG 0x088 #define PCIE_CC_REV_ID_5_EP1_REG 0x08c #define PCIE_DEV_ID_6_EP1_REG 0x090 #define PCIE_CC_REV_ID_6_EP1_REG 0x094 #define PCIE_DEV_ID_7_EP1_REG 0x098 #define PCIE_CC_REV_ID_7_EP1_REG 0x09c #define PCIE_DEV_ID_0_EP2_REG 0x0a0 #define PCIE_CC_REV_ID_0_EP2_REG 0x0a4 #define PCIE_DEV_ID_1_EP2_REG 0x0a8 #define PCIE_CC_REV_ID_1_EP2_REG 0x0ac #define PCIE_DEV_ID_2_EP2_REG 0x0b0 #define PCIE_CC_REV_ID_2_EP2_REG 0x0b4 #define PCIE_DEV_ID_3_EP2_REG 0x0b8 #define PCIE_CC_REV_ID_3_EP2_REG 0x0bc #define PCIE_DEV_ID_4_EP2_REG 0x0c0 #define PCIE_CC_REV_ID_4_EP2_REG 0x0c4 #define PCIE_DEV_ID_5_EP2_REG 0x0c8 #define PCIE_CC_REV_ID_5_EP2_REG 0x0cc #define PCIE_DEV_ID_6_EP2_REG 0x0d0 #define PCIE_CC_REV_ID_6_EP2_REG 0x0d4 #define PCIE_DEV_ID_7_EP2_REG 0x0d8 #define PCIE_CC_REV_ID_7_EP2_REG 0x0dC #define PCIE_DEV_ID_0_EP3_REG 0x0e0 #define PCIE_CC_REV_ID_0_EP3_REG 0x0e4 #define PCIE_DEV_ID_1_EP3_REG 0x0e8 #define PCIE_CC_REV_ID_1_EP3_REG 0x0ec #define PCIE_DEV_ID_2_EP3_REG 0x0f0 #define PCIE_CC_REV_ID_2_EP3_REG 0x0f4 #define PCIE_DEV_ID_3_EP3_REG 0x0f8 #define PCIE_CC_REV_ID_3_EP3_REG 0x0fc #define PCIE_DEV_ID_4_EP3_REG 0x100 #define PCIE_CC_REV_ID_4_EP3_REG 0x104 #define PCIE_DEV_ID_5_EP3_REG 0x108 #define PCIE_CC_REV_ID_5_EP3_REG 0x10c #define PCIE_DEV_ID_6_EP3_REG 0x110 #define PCIE_CC_REV_ID_6_EP3_REG 0x114 #define PCIE_DEV_ID_7_EP3_REG 0x118 #define PCIE_CC_REV_ID_7_EP3_REG 0x11c #define PCIE_DEV_ID_0_EP4_REG 0x120 #define PCIE_CC_REV_ID_0_EP4_REG 0x124 #define PCIE_DEV_ID_1_EP4_REG 0x128 #define PCIE_CC_REV_ID_1_EP4_REG 0x12c #define PCIE_DEV_ID_2_EP4_REG 0x130 #define PCIE_CC_REV_ID_2_EP4_REG 0x134 #define PCIE_DEV_ID_3_EP4_REG 0x138 #define PCIE_CC_REV_ID_3_EP4_REG 0x13c #define PCIE_DEV_ID_4_EP4_REG 0x140 #define PCIE_CC_REV_ID_4_EP4_REG 0x144 #define PCIE_DEV_ID_5_EP4_REG 0x148 #define PCIE_CC_REV_ID_5_EP4_REG 0x14c #define PCIE_DEV_ID_6_EP4_REG 0x150 #define PCIE_CC_REV_ID_6_EP4_REG 0x154 #define PCIE_DEV_ID_7_EP4_REG 0x158 #define PCIE_CC_REV_ID_7_EP4_REG 0x15c #define PCIE_SUBSYS_VEN_ID_REG 0x160 #define PCIE_COMMON_CLOCK_CONFIG_0_4_0 0x164 #define PCIE_MIPHYP_SSC_EN_REG 0x168 #define PCIE_MIPHYP_ADDR_REG 0x16c #define PCIE_L1_ASPM_READY_REG 0x170 #define PCIE_EXT_CFG_RDY_REG 0x174 #define PCIE_SoC_INT_ROUTER_STATUS0_REG 0x178 #define PCIE_SoC_INT_ROUTER_STATUS1_REG 0x17c #define PCIE_SoC_INT_ROUTER_STATUS2_REG 0x180 #define PCIE_SoC_INT_ROUTER_STATUS3_REG 0x184 #define DMA_IP_CTRL_REG 0x324 #define DISP_BRIDGE_PU_PD_CTRL_REG 0x328 #define VIP_PU_PD_CTRL_REG 0x32c #define USB_MLB_PU_PD_CTRL_REG 0x330 #define SDIO_PU_PD_MISCFUNC_CTRL_REG1 0x334 #define SDIO_PU_PD_MISCFUNC_CTRL_REG2 0x338 #define UART_PU_PD_CTRL_REG 0x33c #define ARM_Lock 0x340 #define SYS_IO_CHAR_REG1 0x344 #define SYS_IO_CHAR_REG2 0x348 #define SATA_CORE_ID_REG 0x34c #define SATA_CTRL_REG 0x350 #define I2C_HSFIX_MISC_REG 0x354 #define SPARE2_RESERVED 0x358 #define SPARE3_RESERVED 0x35c #define MASTER_LOCK_REG 0x368 #define SYSTEM_CONFIG_STATUS_REG 0x36c #define MSP_CLK_CTRL_REG 0x39c #define COMPENSATION_REG1 0x3c4 #define COMPENSATION_REG2 0x3c8 #define COMPENSATION_REG3 0x3cc #define TEST_CTL_REG 0x3d0 /* * SECR (OTP) registers */ #define STA2X11_SECR_CR 0x00 #define STA2X11_SECR_FVR0 0x10 #define STA2X11_SECR_FVR1 0x14 extern int sta2x11_mfd_get_regs_data(struct platform_device *pdev, enum sta2x11_mfd_plat_dev index, void __iomem **regs, spinlock_t **lock); #endif /* __STA2X11_MFD_H */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1