Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
pascal paillet | 598 | 99.01% | 1 | 50.00% |
Sean Nyekjaer | 6 | 0.99% | 1 | 50.00% |
Total | 604 | 2 |
/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (C) STMicroelectronics 2018 - All Rights Reserved * Author: Philippe Peurichard <philippe.peurichard@st.com>, * Pascal Paillet <p.paillet@st.com> for STMicroelectronics. */ #ifndef __LINUX_MFD_STPMIC1_H #define __LINUX_MFD_STPMIC1_H #define TURN_ON_SR 0x1 #define TURN_OFF_SR 0x2 #define ICC_LDO_TURN_OFF_SR 0x3 #define ICC_BUCK_TURN_OFF_SR 0x4 #define RREQ_STATE_SR 0x5 #define VERSION_SR 0x6 #define MAIN_CR 0x10 #define PADS_PULL_CR 0x11 #define BUCKS_PD_CR 0x12 #define LDO14_PD_CR 0x13 #define LDO56_VREF_PD_CR 0x14 #define VBUS_DET_VIN_CR 0x15 #define PKEY_TURNOFF_CR 0x16 #define BUCKS_MASK_RANK_CR 0x17 #define BUCKS_MASK_RESET_CR 0x18 #define LDOS_MASK_RANK_CR 0x19 #define LDOS_MASK_RESET_CR 0x1A #define WCHDG_CR 0x1B #define WCHDG_TIMER_CR 0x1C #define BUCKS_ICCTO_CR 0x1D #define LDOS_ICCTO_CR 0x1E #define BUCK1_ACTIVE_CR 0x20 #define BUCK2_ACTIVE_CR 0x21 #define BUCK3_ACTIVE_CR 0x22 #define BUCK4_ACTIVE_CR 0x23 #define VREF_DDR_ACTIVE_CR 0x24 #define LDO1_ACTIVE_CR 0x25 #define LDO2_ACTIVE_CR 0x26 #define LDO3_ACTIVE_CR 0x27 #define LDO4_ACTIVE_CR 0x28 #define LDO5_ACTIVE_CR 0x29 #define LDO6_ACTIVE_CR 0x2A #define BUCK1_STDBY_CR 0x30 #define BUCK2_STDBY_CR 0x31 #define BUCK3_STDBY_CR 0x32 #define BUCK4_STDBY_CR 0x33 #define VREF_DDR_STDBY_CR 0x34 #define LDO1_STDBY_CR 0x35 #define LDO2_STDBY_CR 0x36 #define LDO3_STDBY_CR 0x37 #define LDO4_STDBY_CR 0x38 #define LDO5_STDBY_CR 0x39 #define LDO6_STDBY_CR 0x3A #define BST_SW_CR 0x40 #define INT_PENDING_R1 0x50 #define INT_PENDING_R2 0x51 #define INT_PENDING_R3 0x52 #define INT_PENDING_R4 0x53 #define INT_DBG_LATCH_R1 0x60 #define INT_DBG_LATCH_R2 0x61 #define INT_DBG_LATCH_R3 0x62 #define INT_DBG_LATCH_R4 0x63 #define INT_CLEAR_R1 0x70 #define INT_CLEAR_R2 0x71 #define INT_CLEAR_R3 0x72 #define INT_CLEAR_R4 0x73 #define INT_MASK_R1 0x80 #define INT_MASK_R2 0x81 #define INT_MASK_R3 0x82 #define INT_MASK_R4 0x83 #define INT_SET_MASK_R1 0x90 #define INT_SET_MASK_R2 0x91 #define INT_SET_MASK_R3 0x92 #define INT_SET_MASK_R4 0x93 #define INT_CLEAR_MASK_R1 0xA0 #define INT_CLEAR_MASK_R2 0xA1 #define INT_CLEAR_MASK_R3 0xA2 #define INT_CLEAR_MASK_R4 0xA3 #define INT_SRC_R1 0xB0 #define INT_SRC_R2 0xB1 #define INT_SRC_R3 0xB2 #define INT_SRC_R4 0xB3 #define PMIC_MAX_REGISTER_ADDRESS INT_SRC_R4 #define STPMIC1_PMIC_NUM_IRQ_REGS 4 #define TURN_OFF_SR_ICC_EVENT 0x08 #define LDO_VOLTAGE_MASK GENMASK(6, 2) #define BUCK_VOLTAGE_MASK GENMASK(7, 2) #define LDO_BUCK_VOLTAGE_SHIFT 2 #define LDO_ENABLE_MASK BIT(0) #define BUCK_ENABLE_MASK BIT(0) #define BUCK_HPLP_ENABLE_MASK BIT(1) #define BUCK_HPLP_SHIFT 1 #define STDBY_ENABLE_MASK BIT(0) #define BUCKS_PD_CR_REG_MASK GENMASK(7, 0) #define BUCK_MASK_RANK_REGISTER_MASK GENMASK(3, 0) #define BUCK_MASK_RESET_REGISTER_MASK GENMASK(3, 0) #define LDO1234_PULL_DOWN_REGISTER_MASK GENMASK(7, 0) #define LDO56_VREF_PD_CR_REG_MASK GENMASK(5, 0) #define LDO_MASK_RANK_REGISTER_MASK GENMASK(5, 0) #define LDO_MASK_RESET_REGISTER_MASK GENMASK(5, 0) #define BUCK1_PULL_DOWN_REG BUCKS_PD_CR #define BUCK1_PULL_DOWN_MASK BIT(0) #define BUCK2_PULL_DOWN_REG BUCKS_PD_CR #define BUCK2_PULL_DOWN_MASK BIT(2) #define BUCK3_PULL_DOWN_REG BUCKS_PD_CR #define BUCK3_PULL_DOWN_MASK BIT(4) #define BUCK4_PULL_DOWN_REG BUCKS_PD_CR #define BUCK4_PULL_DOWN_MASK BIT(6) #define LDO1_PULL_DOWN_REG LDO14_PD_CR #define LDO1_PULL_DOWN_MASK BIT(0) #define LDO2_PULL_DOWN_REG LDO14_PD_CR #define LDO2_PULL_DOWN_MASK BIT(2) #define LDO3_PULL_DOWN_REG LDO14_PD_CR #define LDO3_PULL_DOWN_MASK BIT(4) #define LDO4_PULL_DOWN_REG LDO14_PD_CR #define LDO4_PULL_DOWN_MASK BIT(6) #define LDO5_PULL_DOWN_REG LDO56_VREF_PD_CR #define LDO5_PULL_DOWN_MASK BIT(0) #define LDO6_PULL_DOWN_REG LDO56_VREF_PD_CR #define LDO6_PULL_DOWN_MASK BIT(2) #define VREF_DDR_PULL_DOWN_REG LDO56_VREF_PD_CR #define VREF_DDR_PULL_DOWN_MASK BIT(4) #define BUCKS_ICCTO_CR_REG_MASK GENMASK(6, 0) #define LDOS_ICCTO_CR_REG_MASK GENMASK(5, 0) #define LDO_BYPASS_MASK BIT(7) /* Main PMIC Control Register * MAIN_CR * Address : 0x10 */ #define OCP_OFF_DBG BIT(4) #define PWRCTRL_POLARITY_HIGH BIT(3) #define PWRCTRL_ENABLE BIT(2) #define RESTART_REQUEST_ENABLE BIT(1) #define SOFTWARE_SWITCH_OFF BIT(0) /* Main PMIC PADS Control Register * PADS_PULL_CR * Address : 0x11 */ #define WAKEUP_DETECTOR_DISABLED BIT(4) #define PWRCTRL_PD_ACTIVE BIT(3) #define PWRCTRL_PU_ACTIVE BIT(2) #define WAKEUP_PD_ACTIVE BIT(1) #define PONKEY_PU_INACTIVE BIT(0) /* Main PMIC VINLOW Control Register * VBUS_DET_VIN_CRC DMSC * Address : 0x15 */ #define SWIN_DETECTOR_ENABLED BIT(7) #define SWOUT_DETECTOR_ENABLED BIT(6) #define VINLOW_ENABLED BIT(0) #define VINLOW_CTRL_REG_MASK GENMASK(7, 0) /* USB Control Register * Address : 0x40 */ #define BOOST_OVP_DISABLED BIT(7) #define VBUS_OTG_DETECTION_DISABLED BIT(6) #define SW_OUT_DISCHARGE BIT(5) #define VBUS_OTG_DISCHARGE BIT(4) #define OCP_LIMIT_HIGH BIT(3) #define SWIN_SWOUT_ENABLED BIT(2) #define USBSW_OTG_SWITCH_ENABLED BIT(1) #define BOOST_ENABLED BIT(0) /* PKEY_TURNOFF_CR * Address : 0x16 */ #define PONKEY_PWR_OFF BIT(7) #define PONKEY_CC_FLAG_CLEAR BIT(6) #define PONKEY_TURNOFF_TIMER_MASK GENMASK(3, 0) #define PONKEY_TURNOFF_MASK GENMASK(7, 0) /* * struct stpmic1 - stpmic1 master device for sub-drivers * @dev: master device of the chip (can be used to access platform data) * @irq: main IRQ number * @regmap_irq_chip_data: irq chip data */ struct stpmic1 { struct device *dev; struct regmap *regmap; int irq; struct regmap_irq_chip_data *irq_data; }; #endif /* __LINUX_MFD_STPMIC1_H */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1