Contributors: 43
| Author |
Tokens |
Token Proportion |
Commits |
Commit Proportion |
| Russell King |
239 |
25.53% |
16 |
18.60% |
| Peter Hurley |
83 |
8.87% |
8 |
9.30% |
| Ilpo Järvinen |
74 |
7.91% |
8 |
9.30% |
| Yinghai Lu |
71 |
7.59% |
1 |
1.16% |
| Alan Cox |
63 |
6.73% |
5 |
5.81% |
| Paul Gortmaker |
62 |
6.62% |
2 |
2.33% |
| Magnus Damm |
52 |
5.56% |
3 |
3.49% |
| David Daney |
25 |
2.67% |
2 |
2.33% |
| Matwey V. Kornilov |
23 |
2.46% |
1 |
1.16% |
| Andy Shevchenko |
21 |
2.24% |
2 |
2.33% |
| Manuel Lauss |
18 |
1.92% |
1 |
1.16% |
| Jamie Iles |
18 |
1.92% |
1 |
1.16% |
| Philippe Langlais |
15 |
1.60% |
1 |
1.16% |
| Lukas Wunner |
15 |
1.60% |
1 |
1.16% |
| Lee Jones |
14 |
1.50% |
1 |
1.16% |
| Serge Semin |
13 |
1.39% |
1 |
1.16% |
| Corey Minyard |
12 |
1.28% |
1 |
1.16% |
| Rafael Gago |
9 |
0.96% |
1 |
1.16% |
| Linus Torvalds (pre-git) |
9 |
0.96% |
3 |
3.49% |
| Björn Helgaas |
9 |
0.96% |
1 |
1.16% |
| Sebastian Andrzej Siewior |
8 |
0.85% |
3 |
3.49% |
| Heikki Krogerus |
8 |
0.85% |
1 |
1.16% |
| Ed Blake |
8 |
0.85% |
2 |
2.33% |
| Darwin Dingel |
8 |
0.85% |
1 |
1.16% |
| Dan J Williams |
6 |
0.64% |
1 |
1.16% |
| Vikram Pandita |
5 |
0.53% |
1 |
1.16% |
| Yegor Yefremov |
5 |
0.53% |
1 |
1.16% |
| Jeremy Kerr |
5 |
0.53% |
1 |
1.16% |
| Dmitry Safonov |
5 |
0.53% |
1 |
1.16% |
| Will Newton |
4 |
0.43% |
1 |
1.16% |
| Yoshihiro Yunomae |
4 |
0.43% |
1 |
1.16% |
| Rob Herring |
3 |
0.32% |
1 |
1.16% |
| JiSheng Zhang |
3 |
0.32% |
1 |
1.16% |
| Wan Ahmad Zainie |
3 |
0.32% |
1 |
1.16% |
| Masahiro Yamada |
3 |
0.32% |
1 |
1.16% |
| Lennert Buytenhek |
2 |
0.21% |
1 |
1.16% |
| Måns Rullgård |
2 |
0.21% |
1 |
1.16% |
| Thomas Gleixner |
2 |
0.21% |
1 |
1.16% |
| Paul B Schroeder |
2 |
0.21% |
1 |
1.16% |
| Eddie Huang |
2 |
0.21% |
1 |
1.16% |
| Pantelis Antoniou |
1 |
0.11% |
1 |
1.16% |
| Jiri Slaby |
1 |
0.11% |
1 |
1.16% |
| Josh Boyer |
1 |
0.11% |
1 |
1.16% |
| Total |
936 |
|
86 |
|
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* linux/include/linux/serial_8250.h
*
* Copyright (C) 2004 Russell King
*/
#ifndef _LINUX_SERIAL_8250_H
#define _LINUX_SERIAL_8250_H
#include <linux/errno.h>
#include <linux/serial_core.h>
#include <linux/serial_reg.h>
#include <linux/platform_device.h>
struct uart_8250_port;
/*
* This is the platform device platform_data structure
*
* @mapsize: Port size for ioremap()
* @bugs: Port bugs
*
* @dl_read: ``u32 ()(struct uart_8250_port *up)``
*
* UART divisor latch read.
*
* @dl_write: ``void ()(struct uart_8250_port *up, u32 value)``
*
* Write @value into UART divisor latch.
*
* Locking: Caller holds port's lock.
*/
struct plat_serial8250_port {
unsigned long iobase; /* io base address */
void __iomem *membase; /* ioremap cookie or NULL */
resource_size_t mapbase; /* resource base */
resource_size_t mapsize;
unsigned int uartclk; /* UART clock rate */
unsigned int irq; /* interrupt number */
unsigned long irqflags; /* request_irq flags */
void *private_data;
unsigned char regshift; /* register shift */
unsigned char iotype; /* UPIO_* */
unsigned char hub6;
unsigned char has_sysrq; /* supports magic SysRq */
unsigned int type; /* If UPF_FIXED_TYPE */
upf_t flags; /* UPF_* flags */
u16 bugs; /* port bugs */
unsigned int (*serial_in)(struct uart_port *, int);
void (*serial_out)(struct uart_port *, int, int);
u32 (*dl_read)(struct uart_8250_port *up);
void (*dl_write)(struct uart_8250_port *up, u32 value);
void (*set_termios)(struct uart_port *,
struct ktermios *new,
const struct ktermios *old);
void (*set_ldisc)(struct uart_port *,
struct ktermios *);
unsigned int (*get_mctrl)(struct uart_port *);
int (*handle_irq)(struct uart_port *);
void (*pm)(struct uart_port *, unsigned int state,
unsigned old);
void (*handle_break)(struct uart_port *);
};
/*
* Allocate 8250 platform device IDs. Nothing is implied by
* the numbering here, except for the legacy entry being -1.
*/
enum {
PLAT8250_DEV_LEGACY = -1,
PLAT8250_DEV_PLATFORM,
PLAT8250_DEV_PLATFORM1,
PLAT8250_DEV_PLATFORM2,
PLAT8250_DEV_FOURPORT,
PLAT8250_DEV_ACCENT,
PLAT8250_DEV_BOCA,
PLAT8250_DEV_EXAR_ST16C554,
PLAT8250_DEV_HUB6,
PLAT8250_DEV_AU1X00,
PLAT8250_DEV_SM501,
};
struct uart_8250_dma;
struct uart_8250_port;
/**
* 8250 core driver operations
*
* @setup_irq() Setup irq handling. The universal 8250 driver links this
* port to the irq chain. Other drivers may @request_irq().
* @release_irq() Undo irq handling. The universal 8250 driver unlinks
* the port from the irq chain.
*/
struct uart_8250_ops {
int (*setup_irq)(struct uart_8250_port *);
void (*release_irq)(struct uart_8250_port *);
void (*setup_timer)(struct uart_8250_port *);
};
struct uart_8250_em485 {
struct hrtimer start_tx_timer; /* "rs485 start tx" timer */
struct hrtimer stop_tx_timer; /* "rs485 stop tx" timer */
struct hrtimer *active_timer; /* pointer to active timer */
struct uart_8250_port *port; /* for hrtimer callbacks */
unsigned int tx_stopped:1; /* tx is currently stopped */
};
/*
* This should be used by drivers which want to register
* their own 8250 ports without registering their own
* platform device. Using these will make your driver
* dependent on the 8250 driver.
*
* @dl_read: ``u32 ()(struct uart_8250_port *port)``
*
* UART divisor latch read.
*
* @dl_write: ``void ()(struct uart_8250_port *port, u32 value)``
*
* Write @value into UART divisor latch.
*
* Locking: Caller holds port's lock.
*/
struct uart_8250_port {
struct uart_port port;
struct timer_list timer; /* "no irq" timer */
struct list_head list; /* ports on this IRQ */
u32 capabilities; /* port capabilities */
u16 bugs; /* port bugs */
unsigned int tx_loadsz; /* transmit fifo load size */
unsigned char acr;
unsigned char fcr;
unsigned char ier;
unsigned char lcr;
unsigned char mcr;
unsigned char cur_iotype; /* Running I/O type */
unsigned int rpm_tx_active;
unsigned char canary; /* non-zero during system sleep
* if no_console_suspend
*/
unsigned char probe;
struct mctrl_gpios *gpios;
#define UART_PROBE_RSA (1 << 0)
/*
* Some bits in registers are cleared on a read, so they must
* be saved whenever the register is read but the bits will not
* be immediately processed.
*/
#define LSR_SAVE_FLAGS UART_LSR_BRK_ERROR_BITS
u16 lsr_saved_flags;
u16 lsr_save_mask;
#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA
unsigned char msr_saved_flags;
struct uart_8250_dma *dma;
const struct uart_8250_ops *ops;
/* 8250 specific callbacks */
u32 (*dl_read)(struct uart_8250_port *up);
void (*dl_write)(struct uart_8250_port *up, u32 value);
struct uart_8250_em485 *em485;
void (*rs485_start_tx)(struct uart_8250_port *);
void (*rs485_stop_tx)(struct uart_8250_port *);
/* Serial port overrun backoff */
struct delayed_work overrun_backoff;
u32 overrun_backoff_time_ms;
};
static inline struct uart_8250_port *up_to_u8250p(struct uart_port *up)
{
return container_of(up, struct uart_8250_port, port);
}
int serial8250_register_8250_port(const struct uart_8250_port *);
void serial8250_unregister_port(int line);
void serial8250_suspend_port(int line);
void serial8250_resume_port(int line);
int early_serial_setup(struct uart_port *port);
int early_serial8250_setup(struct earlycon_device *device, const char *options);
void serial8250_update_uartclk(struct uart_port *port, unsigned int uartclk);
void serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
const struct ktermios *old);
void serial8250_do_set_ldisc(struct uart_port *port, struct ktermios *termios);
unsigned int serial8250_do_get_mctrl(struct uart_port *port);
int serial8250_do_startup(struct uart_port *port);
void serial8250_do_shutdown(struct uart_port *port);
void serial8250_do_pm(struct uart_port *port, unsigned int state,
unsigned int oldstate);
void serial8250_do_set_mctrl(struct uart_port *port, unsigned int mctrl);
void serial8250_do_set_divisor(struct uart_port *port, unsigned int baud,
unsigned int quot, unsigned int quot_frac);
int fsl8250_handle_irq(struct uart_port *port);
int serial8250_handle_irq(struct uart_port *port, unsigned int iir);
u16 serial8250_rx_chars(struct uart_8250_port *up, u16 lsr);
void serial8250_read_char(struct uart_8250_port *up, u16 lsr);
void serial8250_tx_chars(struct uart_8250_port *up);
unsigned int serial8250_modem_status(struct uart_8250_port *up);
void serial8250_init_port(struct uart_8250_port *up);
void serial8250_set_defaults(struct uart_8250_port *up);
void serial8250_console_write(struct uart_8250_port *up, const char *s,
unsigned int count);
int serial8250_console_setup(struct uart_port *port, char *options, bool probe);
int serial8250_console_exit(struct uart_port *port);
void serial8250_set_isa_configurator(void (*v)(int port, struct uart_port *up,
u32 *capabilities));
#ifdef CONFIG_SERIAL_8250_RT288X
int rt288x_setup(struct uart_port *p);
int au_platform_setup(struct plat_serial8250_port *p);
#else
static inline int rt288x_setup(struct uart_port *p) { return -ENODEV; }
static inline int au_platform_setup(struct plat_serial8250_port *p) { return -ENODEV; }
#endif
#endif