Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Mats Randgaard | 133 | 97.08% | 1 | 33.33% |
Hans Verkuil | 4 | 2.92% | 2 | 66.67% |
Total | 137 | 3 |
/* SPDX-License-Identifier: GPL-2.0-only */ /* * tc358743 - Toshiba HDMI to CSI-2 bridge * * Copyright 2015 Cisco Systems, Inc. and/or its affiliates. All rights reserved. */ /* * References (c = chapter, p = page): * REF_01 - Toshiba, TC358743XBG (H2C), Functional Specification, Rev 0.60 * REF_02 - Toshiba, TC358743XBG_HDMI-CSI_Tv11p_nm.xls */ #ifndef _TC358743_ #define _TC358743_ enum tc358743_ddc5v_delays { DDC5V_DELAY_0_MS, DDC5V_DELAY_50_MS, DDC5V_DELAY_100_MS, DDC5V_DELAY_200_MS, }; enum tc358743_hdmi_detection_delay { HDMI_MODE_DELAY_0_MS, HDMI_MODE_DELAY_25_MS, HDMI_MODE_DELAY_50_MS, HDMI_MODE_DELAY_100_MS, }; struct tc358743_platform_data { /* System clock connected to REFCLK (pin H5) */ u32 refclk_hz; /* 26 MHz, 27 MHz or 42 MHz */ /* DDC +5V debounce delay to avoid spurious interrupts when the cable * is connected. * Sets DDC5V_MODE in register DDC_CTL. * Default: DDC5V_DELAY_0_MS */ enum tc358743_ddc5v_delays ddc5v_delay; bool enable_hdcp; /* * The FIFO size is 512x32, so Toshiba recommend to set the default FIFO * level to somewhere in the middle (e.g. 300), so it can cover speed * mismatches in input and output ports. */ u16 fifo_level; /* Bps pr lane is (refclk_hz / pll_prd) * pll_fbd */ u16 pll_prd; u16 pll_fbd; /* CSI * Calculate CSI parameters with REF_02 for the highest resolution your * CSI interface can handle. The driver will adjust the number of CSI * lanes in use according to the pixel clock. * * The values in brackets are calculated with REF_02 when the number of * bps pr lane is 823.5 MHz, and can serve as a starting point. */ u32 lineinitcnt; /* (0x00001770) */ u32 lptxtimecnt; /* (0x00000005) */ u32 tclk_headercnt; /* (0x00001d04) */ u32 tclk_trailcnt; /* (0x00000000) */ u32 ths_headercnt; /* (0x00000505) */ u32 twakeup; /* (0x00004650) */ u32 tclk_postcnt; /* (0x00000000) */ u32 ths_trailcnt; /* (0x00000004) */ u32 hstxvregcnt; /* (0x00000005) */ /* DVI->HDMI detection delay to avoid unnecessary switching between DVI * and HDMI mode. * Sets HDMI_DET_V in register HDMI_DET. * Default: HDMI_MODE_DELAY_0_MS */ enum tc358743_hdmi_detection_delay hdmi_detection_delay; /* Reset PHY automatically when TMDS clock goes from DC to AC. * Sets PHY_AUTO_RST2 in register PHY_CTL2. * Default: false */ bool hdmi_phy_auto_reset_tmds_detected; /* Reset PHY automatically when TMDS clock passes 21 MHz. * Sets PHY_AUTO_RST3 in register PHY_CTL2. * Default: false */ bool hdmi_phy_auto_reset_tmds_in_range; /* Reset PHY automatically when TMDS clock is detected. * Sets PHY_AUTO_RST4 in register PHY_CTL2. * Default: false */ bool hdmi_phy_auto_reset_tmds_valid; /* Reset HDMI PHY automatically when hsync period is out of range. * Sets H_PI_RST in register HV_RST. * Default: false */ bool hdmi_phy_auto_reset_hsync_out_of_range; /* Reset HDMI PHY automatically when vsync period is out of range. * Sets V_PI_RST in register HV_RST. * Default: false */ bool hdmi_phy_auto_reset_vsync_out_of_range; }; /* custom controls */ /* Audio sample rate in Hz */ #define TC358743_CID_AUDIO_SAMPLING_RATE (V4L2_CID_USER_TC358743_BASE + 0) /* Audio present status */ #define TC358743_CID_AUDIO_PRESENT (V4L2_CID_USER_TC358743_BASE + 1) #endif
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1