Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Mauro Carvalho Chehab | 88 | 34.51% | 8 | 36.36% |
Sakari Ailus | 62 | 24.31% | 2 | 9.09% |
Shuah Khan | 37 | 14.51% | 1 | 4.55% |
Steve Longerbeam | 26 | 10.20% | 1 | 4.55% |
Hans Verkuil | 21 | 8.24% | 4 | 18.18% |
Ezequiel García | 12 | 4.71% | 1 | 4.55% |
Laurent Pinchart | 6 | 2.35% | 3 | 13.64% |
Thomas Gleixner | 2 | 0.78% | 1 | 4.55% |
Colton Lewis | 1 | 0.39% | 1 | 4.55% |
Total | 255 | 22 |
/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * v4l2-mc.h - Media Controller V4L2 types and prototypes * * Copyright (C) 2016 Mauro Carvalho Chehab <mchehab@kernel.org> * Copyright (C) 2006-2010 Nokia Corporation * Copyright (c) 2016 Intel Corporation. */ #ifndef _V4L2_MC_H #define _V4L2_MC_H #include <media/media-device.h> #include <media/v4l2-dev.h> #include <media/v4l2-subdev.h> #include <linux/types.h> /* We don't need to include pci.h or usb.h here */ struct pci_dev; struct usb_device; #ifdef CONFIG_MEDIA_CONTROLLER /** * v4l2_mc_create_media_graph() - create Media Controller links at the graph. * * @mdev: pointer to the &media_device struct. * * Add links between the entities commonly found on PC customer's hardware at * the V4L2 side: camera sensors, audio and video PLL-IF decoders, tuners, * analog TV decoder and I/O entities (video, VBI and Software Defined Radio). * * .. note:: * * Webcams are modelled on a very simple way: the sensor is * connected directly to the I/O entity. All dirty details, like * scaler and crop HW are hidden. While such mapping is enough for v4l2 * interface centric PC-consumer's hardware, V4L2 subdev centric camera * hardware should not use this routine, as it will not build the right graph. */ int v4l2_mc_create_media_graph(struct media_device *mdev); /** * v4l_enable_media_source() - Hold media source for exclusive use * if free * * @vdev: pointer to struct video_device * * This interface calls enable_source handler to determine if * media source is free for use. The enable_source handler is * responsible for checking is the media source is free and * start a pipeline between the media source and the media * entity associated with the video device. This interface * should be called from v4l2-core and dvb-core interfaces * that change the source configuration. * * Return: returns zero on success or a negative error code. */ int v4l_enable_media_source(struct video_device *vdev); /** * v4l_disable_media_source() - Release media source * * @vdev: pointer to struct video_device * * This interface calls disable_source handler to release * the media source. The disable_source handler stops the * active media pipeline between the media source and the * media entity associated with the video device. * * Return: returns zero on success or a negative error code. */ void v4l_disable_media_source(struct video_device *vdev); /* * v4l_vb2q_enable_media_tuner - Hold media source for exclusive use * if free. * @q - pointer to struct vb2_queue * * Wrapper for v4l_enable_media_source(). This function should * be called from v4l2-core to enable the media source with * pointer to struct vb2_queue as the input argument. Some * v4l2-core interfaces don't have access to video device and * this interface finds the struct video_device for the q and * calls v4l_enable_media_source(). */ int v4l_vb2q_enable_media_source(struct vb2_queue *q); /** * v4l2_create_fwnode_links_to_pad - Create fwnode-based links from a * source subdev to a sink pad. * * @src_sd: pointer to a source subdev * @sink: pointer to a sink pad * @flags: the link flags * * This function searches for fwnode endpoint connections from a source * subdevice to a single sink pad, and if suitable connections are found, * translates them into media links to that pad. The function can be * called by the sink, in its v4l2-async notifier bound callback, to create * links from a bound source subdevice. * * The @flags argument specifies the link flags. The caller shall ensure that * the flags are valid regardless of the number of links that may be created. * For instance, setting the MEDIA_LNK_FL_ENABLED flag will cause all created * links to be enabled, which isn't valid if more than one link is created. * * .. note:: * * Any sink subdevice that calls this function must implement the * .get_fwnode_pad media operation in order to verify endpoints passed * to the sink are owned by the sink. * * Return 0 on success or a negative error code on failure. */ int v4l2_create_fwnode_links_to_pad(struct v4l2_subdev *src_sd, struct media_pad *sink, u32 flags); /** * v4l2_create_fwnode_links - Create fwnode-based links from a source * subdev to a sink subdev. * * @src_sd: pointer to a source subdevice * @sink_sd: pointer to a sink subdevice * * This function searches for any and all fwnode endpoint connections * between source and sink subdevices, and translates them into media * links. The function can be called by the sink subdevice, in its * v4l2-async notifier subdev bound callback, to create all links from * a bound source subdevice. * * .. note:: * * Any sink subdevice that calls this function must implement the * .get_fwnode_pad media operation in order to verify endpoints passed * to the sink are owned by the sink. * * Return 0 on success or a negative error code on failure. */ int v4l2_create_fwnode_links(struct v4l2_subdev *src_sd, struct v4l2_subdev *sink_sd); /** * v4l2_pipeline_pm_get - Increase the use count of a pipeline * @entity: The root entity of a pipeline * * THIS FUNCTION IS DEPRECATED. DO NOT USE IN NEW DRIVERS. USE RUNTIME PM * ON SUB-DEVICE DRIVERS INSTEAD. * * Update the use count of all entities in the pipeline and power entities on. * * This function is intended to be called in video node open. It uses * struct media_entity.use_count to track the power status. The use * of this function should be paired with v4l2_pipeline_link_notify(). * * Return 0 on success or a negative error code on failure. */ int v4l2_pipeline_pm_get(struct media_entity *entity); /** * v4l2_pipeline_pm_put - Decrease the use count of a pipeline * @entity: The root entity of a pipeline * * THIS FUNCTION IS DEPRECATED. DO NOT USE IN NEW DRIVERS. USE RUNTIME PM * ON SUB-DEVICE DRIVERS INSTEAD. * * Update the use count of all entities in the pipeline and power entities off. * * This function is intended to be called in video node release. It uses * struct media_entity.use_count to track the power status. The use * of this function should be paired with v4l2_pipeline_link_notify(). */ void v4l2_pipeline_pm_put(struct media_entity *entity); /** * v4l2_pipeline_link_notify - Link management notification callback * @link: The link * @flags: New link flags that will be applied * @notification: The link's state change notification type (MEDIA_DEV_NOTIFY_*) * * React to link management on powered pipelines by updating the use count of * all entities in the source and sink sides of the link. Entities are powered * on or off accordingly. The use of this function should be paired * with v4l2_pipeline_pm_{get,put}(). * * Return 0 on success or a negative error code on failure. Powering entities * off is assumed to never fail. This function will not fail for disconnection * events. */ int v4l2_pipeline_link_notify(struct media_link *link, u32 flags, unsigned int notification); #else /* CONFIG_MEDIA_CONTROLLER */ static inline int v4l2_mc_create_media_graph(struct media_device *mdev) { return 0; } static inline int v4l_enable_media_source(struct video_device *vdev) { return 0; } static inline void v4l_disable_media_source(struct video_device *vdev) { } static inline int v4l_vb2q_enable_media_source(struct vb2_queue *q) { return 0; } static inline int v4l2_pipeline_pm_get(struct media_entity *entity) { return 0; } static inline void v4l2_pipeline_pm_put(struct media_entity *entity) {} static inline int v4l2_pipeline_link_notify(struct media_link *link, u32 flags, unsigned int notification) { return 0; } #endif /* CONFIG_MEDIA_CONTROLLER */ #endif /* _V4L2_MC_H */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1