Contributors: 14
Author Tokens Token Proportion Commits Commit Proportion
Linus Torvalds (pre-git) 145 53.70% 4 14.29%
Wolfram Sang 40 14.81% 6 21.43%
David Howells 27 10.00% 1 3.57%
Albert Cranford 21 7.78% 2 7.14%
Jean Delvare 10 3.70% 4 14.29%
Laurent Pinchart 4 1.48% 1 3.57%
Christoph Hellwig 4 1.48% 1 3.57%
Benjamin Tissoires 4 1.48% 1 3.57%
Mark Brown 4 1.48% 1 3.57%
David Brownell 4 1.48% 3 10.71%
David S. Miller 3 1.11% 1 3.57%
David Woodhouse 2 0.74% 1 3.57%
Hideki Iwamoto 1 0.37% 1 3.57%
Greg Kroah-Hartman 1 0.37% 1 3.57%
Total 270 28 


/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
/*
 * i2c.h - definitions for the I2C bus interface
 *
 * Copyright (C) 1995-2000 Simon G. Vogl
 * With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and
 * Frodo Looijaard <frodol@dds.nl>
 */

#ifndef _UAPI_LINUX_I2C_H
#define _UAPI_LINUX_I2C_H

#include <linux/types.h>

/**
 * struct i2c_msg - an I2C transaction segment beginning with START
 *
 * @addr: Slave address, either 7 or 10 bits. When this is a 10 bit address,
 *   %I2C_M_TEN must be set in @flags and the adapter must support
 *   %I2C_FUNC_10BIT_ADDR.
 *
 * @flags:
 *   Supported by all adapters:
 *   %I2C_M_RD: read data (from slave to master). Guaranteed to be 0x0001!
 *
 *   Optional:
 *   %I2C_M_DMA_SAFE: the buffer of this message is DMA safe. Makes only sense
 *     in kernelspace, because userspace buffers are copied anyway
 *
 *   Only if I2C_FUNC_10BIT_ADDR is set:
 *   %I2C_M_TEN: this is a 10 bit chip address
 *
 *   Only if I2C_FUNC_SMBUS_READ_BLOCK_DATA is set:
 *   %I2C_M_RECV_LEN: message length will be first received byte
 *
 *   Only if I2C_FUNC_NOSTART is set:
 *   %I2C_M_NOSTART: skip repeated start sequence

 *   Only if I2C_FUNC_PROTOCOL_MANGLING is set:
 *   %I2C_M_NO_RD_ACK: in a read message, master ACK/NACK bit is skipped
 *   %I2C_M_IGNORE_NAK: treat NACK from client as ACK
 *   %I2C_M_REV_DIR_ADDR: toggles the Rd/Wr bit
 *   %I2C_M_STOP: force a STOP condition after the message
 *
 * @len: Number of data bytes in @buf being read from or written to the I2C
 *   slave address. For read transactions where %I2C_M_RECV_LEN is set, the
 *   caller guarantees that this buffer can hold up to %I2C_SMBUS_BLOCK_MAX
 *   bytes in addition to the initial length byte sent by the slave (plus,
 *   if used, the SMBus PEC); and this value will be incremented by the number
 *   of block data bytes received.
 *
 * @buf: The buffer into which data is read, or from which it's written.
 *
 * An i2c_msg is the low level representation of one segment of an I2C
 * transaction.  It is visible to drivers in the @i2c_transfer() procedure,
 * to userspace from i2c-dev, and to I2C adapter drivers through the
 * @i2c_adapter.@master_xfer() method.
 *
 * Except when I2C "protocol mangling" is used, all I2C adapters implement
 * the standard rules for I2C transactions.  Each transaction begins with a
 * START.  That is followed by the slave address, and a bit encoding read
 * versus write.  Then follow all the data bytes, possibly including a byte
 * with SMBus PEC.  The transfer terminates with a NAK, or when all those
 * bytes have been transferred and ACKed.  If this is the last message in a
 * group, it is followed by a STOP.  Otherwise it is followed by the next
 * @i2c_msg transaction segment, beginning with a (repeated) START.
 *
 * Alternatively, when the adapter supports %I2C_FUNC_PROTOCOL_MANGLING then
 * passing certain @flags may have changed those standard protocol behaviors.
 * Those flags are only for use with broken/nonconforming slaves, and with
 * adapters which are known to support the specific mangling options they need.
 */
struct i2c_msg {
	__u16 addr;
	__u16 flags;
#define I2C_M_RD		0x0001	/* guaranteed to be 0x0001! */
#define I2C_M_TEN		0x0010	/* use only if I2C_FUNC_10BIT_ADDR */
#define I2C_M_DMA_SAFE		0x0200	/* use only in kernel space */
#define I2C_M_RECV_LEN		0x0400	/* use only if I2C_FUNC_SMBUS_READ_BLOCK_DATA */
#define I2C_M_NO_RD_ACK		0x0800	/* use only if I2C_FUNC_PROTOCOL_MANGLING */
#define I2C_M_IGNORE_NAK	0x1000	/* use only if I2C_FUNC_PROTOCOL_MANGLING */
#define I2C_M_REV_DIR_ADDR	0x2000	/* use only if I2C_FUNC_PROTOCOL_MANGLING */
#define I2C_M_NOSTART		0x4000	/* use only if I2C_FUNC_NOSTART */
#define I2C_M_STOP		0x8000	/* use only if I2C_FUNC_PROTOCOL_MANGLING */
	__u16 len;
	__u8 *buf;
};

/* To determine what functionality is present */

#define I2C_FUNC_I2C			0x00000001
#define I2C_FUNC_10BIT_ADDR		0x00000002 /* required for I2C_M_TEN */
#define I2C_FUNC_PROTOCOL_MANGLING	0x00000004 /* required for I2C_M_IGNORE_NAK etc. */
#define I2C_FUNC_SMBUS_PEC		0x00000008
#define I2C_FUNC_NOSTART		0x00000010 /* required for I2C_M_NOSTART */
#define I2C_FUNC_SLAVE			0x00000020
#define I2C_FUNC_SMBUS_BLOCK_PROC_CALL	0x00008000 /* SMBus 2.0 or later */
#define I2C_FUNC_SMBUS_QUICK		0x00010000
#define I2C_FUNC_SMBUS_READ_BYTE	0x00020000
#define I2C_FUNC_SMBUS_WRITE_BYTE	0x00040000
#define I2C_FUNC_SMBUS_READ_BYTE_DATA	0x00080000
#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA	0x00100000
#define I2C_FUNC_SMBUS_READ_WORD_DATA	0x00200000
#define I2C_FUNC_SMBUS_WRITE_WORD_DATA	0x00400000
#define I2C_FUNC_SMBUS_PROC_CALL	0x00800000
#define I2C_FUNC_SMBUS_READ_BLOCK_DATA	0x01000000 /* required for I2C_M_RECV_LEN */
#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000
#define I2C_FUNC_SMBUS_READ_I2C_BLOCK	0x04000000 /* I2C-like block xfer  */
#define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK	0x08000000 /* w/ 1-byte reg. addr. */
#define I2C_FUNC_SMBUS_HOST_NOTIFY	0x10000000 /* SMBus 2.0 or later */

#define I2C_FUNC_SMBUS_BYTE		(I2C_FUNC_SMBUS_READ_BYTE | \
					 I2C_FUNC_SMBUS_WRITE_BYTE)
#define I2C_FUNC_SMBUS_BYTE_DATA	(I2C_FUNC_SMBUS_READ_BYTE_DATA | \
					 I2C_FUNC_SMBUS_WRITE_BYTE_DATA)
#define I2C_FUNC_SMBUS_WORD_DATA	(I2C_FUNC_SMBUS_READ_WORD_DATA | \
					 I2C_FUNC_SMBUS_WRITE_WORD_DATA)
#define I2C_FUNC_SMBUS_BLOCK_DATA	(I2C_FUNC_SMBUS_READ_BLOCK_DATA | \
					 I2C_FUNC_SMBUS_WRITE_BLOCK_DATA)
#define I2C_FUNC_SMBUS_I2C_BLOCK	(I2C_FUNC_SMBUS_READ_I2C_BLOCK | \
					 I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)

#define I2C_FUNC_SMBUS_EMUL		(I2C_FUNC_SMBUS_QUICK | \
					 I2C_FUNC_SMBUS_BYTE | \
					 I2C_FUNC_SMBUS_BYTE_DATA | \
					 I2C_FUNC_SMBUS_WORD_DATA | \
					 I2C_FUNC_SMBUS_PROC_CALL | \
					 I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | \
					 I2C_FUNC_SMBUS_I2C_BLOCK | \
					 I2C_FUNC_SMBUS_PEC)

/* if I2C_M_RECV_LEN is also supported */
#define I2C_FUNC_SMBUS_EMUL_ALL		(I2C_FUNC_SMBUS_EMUL | \
					 I2C_FUNC_SMBUS_READ_BLOCK_DATA | \
					 I2C_FUNC_SMBUS_BLOCK_PROC_CALL)

/*
 * Data for SMBus Messages
 */
#define I2C_SMBUS_BLOCK_MAX	32	/* As specified in SMBus standard */
union i2c_smbus_data {
	__u8 byte;
	__u16 word;
	__u8 block[I2C_SMBUS_BLOCK_MAX + 2]; /* block[0] is used for length */
			       /* and one more for user-space compatibility */
};

/* i2c_smbus_xfer read or write markers */
#define I2C_SMBUS_READ	1
#define I2C_SMBUS_WRITE	0

/* SMBus transaction types (size parameter in the above functions)
   Note: these no longer correspond to the (arbitrary) PIIX4 internal codes! */
#define I2C_SMBUS_QUICK		    0
#define I2C_SMBUS_BYTE		    1
#define I2C_SMBUS_BYTE_DATA	    2
#define I2C_SMBUS_WORD_DATA	    3
#define I2C_SMBUS_PROC_CALL	    4
#define I2C_SMBUS_BLOCK_DATA	    5
#define I2C_SMBUS_I2C_BLOCK_BROKEN  6
#define I2C_SMBUS_BLOCK_PROC_CALL   7		/* SMBus 2.0 */
#define I2C_SMBUS_I2C_BLOCK_DATA    8

#endif /* _UAPI_LINUX_I2C_H */