| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Arnaldo Carvalho de Melo | 830 | 88.49% | 7 | 70.00% |
| Muhammad Usama Anjum | 102 | 10.87% | 1 | 10.00% |
| Daniel Rosenberg | 5 | 0.53% | 1 | 10.00% |
| Gustavo A. R. Silva | 1 | 0.11% | 1 | 10.00% |
| Total | 938 | 10 |
/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ #ifndef _UAPI_LINUX_FS_H #define _UAPI_LINUX_FS_H /* * This file has definitions for some important file table structures * and constants and structures used by various generic file system * ioctl's. Please do not make any changes in this file before * sending patches for review to linux-fsdevel@vger.kernel.org and * linux-api@vger.kernel.org. */ #include <linux/limits.h> #include <linux/ioctl.h> #include <linux/types.h> #ifndef __KERNEL__ #include <linux/fscrypt.h> #endif /* Use of MS_* flags within the kernel is restricted to core mount(2) code. */ #if !defined(__KERNEL__) #include <linux/mount.h> #endif /* * It's silly to have NR_OPEN bigger than NR_FILE, but you can change * the file limit at runtime and only root can increase the per-process * nr_file rlimit, so it's safe to set up a ridiculously high absolute * upper limit on files-per-process. * * Some programs (notably those using select()) may have to be * recompiled to take full advantage of the new limits.. */ /* Fixed constants first: */ #undef NR_OPEN #define INR_OPEN_CUR 1024 /* Initial setting for nfile rlimits */ #define INR_OPEN_MAX 4096 /* Hard limit for nfile rlimits */ #define BLOCK_SIZE_BITS 10 #define BLOCK_SIZE (1<<BLOCK_SIZE_BITS) #define SEEK_SET 0 /* seek relative to beginning of file */ #define SEEK_CUR 1 /* seek relative to current file position */ #define SEEK_END 2 /* seek relative to end of file */ #define SEEK_DATA 3 /* seek to the next data */ #define SEEK_HOLE 4 /* seek to the next hole */ #define SEEK_MAX SEEK_HOLE #define RENAME_NOREPLACE (1 << 0) /* Don't overwrite target */ #define RENAME_EXCHANGE (1 << 1) /* Exchange source and dest */ #define RENAME_WHITEOUT (1 << 2) /* Whiteout source */ struct file_clone_range { __s64 src_fd; __u64 src_offset; __u64 src_length; __u64 dest_offset; }; struct fstrim_range { __u64 start; __u64 len; __u64 minlen; }; /* extent-same (dedupe) ioctls; these MUST match the btrfs ioctl definitions */ #define FILE_DEDUPE_RANGE_SAME 0 #define FILE_DEDUPE_RANGE_DIFFERS 1 /* from struct btrfs_ioctl_file_extent_same_info */ struct file_dedupe_range_info { __s64 dest_fd; /* in - destination file */ __u64 dest_offset; /* in - start of extent in destination */ __u64 bytes_deduped; /* out - total # of bytes we were able * to dedupe from this file. */ /* status of this dedupe operation: * < 0 for error * == FILE_DEDUPE_RANGE_SAME if dedupe succeeds * == FILE_DEDUPE_RANGE_DIFFERS if data differs */ __s32 status; /* out - see above description */ __u32 reserved; /* must be zero */ }; /* from struct btrfs_ioctl_file_extent_same_args */ struct file_dedupe_range { __u64 src_offset; /* in - start of extent in source */ __u64 src_length; /* in - length of extent */ __u16 dest_count; /* in - total elements in info array */ __u16 reserved1; /* must be zero */ __u32 reserved2; /* must be zero */ struct file_dedupe_range_info info[]; }; /* And dynamically-tunable limits and defaults: */ struct files_stat_struct { unsigned long nr_files; /* read only */ unsigned long nr_free_files; /* read only */ unsigned long max_files; /* tunable */ }; struct inodes_stat_t { long nr_inodes; long nr_unused; long dummy[5]; /* padding for sysctl ABI compatibility */ }; #define NR_FILE 8192 /* this can well be larger on a larger system */ /* * Structure for FS_IOC_FSGETXATTR[A] and FS_IOC_FSSETXATTR. */ struct fsxattr { __u32 fsx_xflags; /* xflags field value (get/set) */ __u32 fsx_extsize; /* extsize field value (get/set)*/ __u32 fsx_nextents; /* nextents field value (get) */ __u32 fsx_projid; /* project identifier (get/set) */ __u32 fsx_cowextsize; /* CoW extsize field value (get/set)*/ unsigned char fsx_pad[8]; }; /* * Flags for the fsx_xflags field */ #define FS_XFLAG_REALTIME 0x00000001 /* data in realtime volume */ #define FS_XFLAG_PREALLOC 0x00000002 /* preallocated file extents */ #define FS_XFLAG_IMMUTABLE 0x00000008 /* file cannot be modified */ #define FS_XFLAG_APPEND 0x00000010 /* all writes append */ #define FS_XFLAG_SYNC 0x00000020 /* all writes synchronous */ #define FS_XFLAG_NOATIME 0x00000040 /* do not update access time */ #define FS_XFLAG_NODUMP 0x00000080 /* do not include in backups */ #define FS_XFLAG_RTINHERIT 0x00000100 /* create with rt bit set */ #define FS_XFLAG_PROJINHERIT 0x00000200 /* create with parents projid */ #define FS_XFLAG_NOSYMLINKS 0x00000400 /* disallow symlink creation */ #define FS_XFLAG_EXTSIZE 0x00000800 /* extent size allocator hint */ #define FS_XFLAG_EXTSZINHERIT 0x00001000 /* inherit inode extent size */ #define FS_XFLAG_NODEFRAG 0x00002000 /* do not defragment */ #define FS_XFLAG_FILESTREAM 0x00004000 /* use filestream allocator */ #define FS_XFLAG_DAX 0x00008000 /* use DAX for IO */ #define FS_XFLAG_COWEXTSIZE 0x00010000 /* CoW extent size allocator hint */ #define FS_XFLAG_HASATTR 0x80000000 /* no DIFLAG for this */ /* the read-only stuff doesn't really belong here, but any other place is probably as bad and I don't want to create yet another include file. */ #define BLKROSET _IO(0x12,93) /* set device read-only (0 = read-write) */ #define BLKROGET _IO(0x12,94) /* get read-only status (0 = read_write) */ #define BLKRRPART _IO(0x12,95) /* re-read partition table */ #define BLKGETSIZE _IO(0x12,96) /* return device size /512 (long *arg) */ #define BLKFLSBUF _IO(0x12,97) /* flush buffer cache */ #define BLKRASET _IO(0x12,98) /* set read ahead for block device */ #define BLKRAGET _IO(0x12,99) /* get current read ahead setting */ #define BLKFRASET _IO(0x12,100)/* set filesystem (mm/filemap.c) read-ahead */ #define BLKFRAGET _IO(0x12,101)/* get filesystem (mm/filemap.c) read-ahead */ #define BLKSECTSET _IO(0x12,102)/* set max sectors per request (ll_rw_blk.c) */ #define BLKSECTGET _IO(0x12,103)/* get max sectors per request (ll_rw_blk.c) */ #define BLKSSZGET _IO(0x12,104)/* get block device sector size */ #if 0 #define BLKPG _IO(0x12,105)/* See blkpg.h */ /* Some people are morons. Do not use sizeof! */ #define BLKELVGET _IOR(0x12,106,size_t)/* elevator get */ #define BLKELVSET _IOW(0x12,107,size_t)/* elevator set */ /* This was here just to show that the number is taken - probably all these _IO(0x12,*) ioctls should be moved to blkpg.h. */ #endif /* A jump here: 108-111 have been used for various private purposes. */ #define BLKBSZGET _IOR(0x12,112,size_t) #define BLKBSZSET _IOW(0x12,113,size_t) #define BLKGETSIZE64 _IOR(0x12,114,size_t) /* return device size in bytes (u64 *arg) */ #define BLKTRACESETUP _IOWR(0x12,115,struct blk_user_trace_setup) #define BLKTRACESTART _IO(0x12,116) #define BLKTRACESTOP _IO(0x12,117) #define BLKTRACETEARDOWN _IO(0x12,118) #define BLKDISCARD _IO(0x12,119) #define BLKIOMIN _IO(0x12,120) #define BLKIOOPT _IO(0x12,121) #define BLKALIGNOFF _IO(0x12,122) #define BLKPBSZGET _IO(0x12,123) #define BLKDISCARDZEROES _IO(0x12,124) #define BLKSECDISCARD _IO(0x12,125) #define BLKROTATIONAL _IO(0x12,126) #define BLKZEROOUT _IO(0x12,127) #define BLKGETDISKSEQ _IOR(0x12,128,__u64) /* * A jump here: 130-136 are reserved for zoned block devices * (see uapi/linux/blkzoned.h) */ #define BMAP_IOCTL 1 /* obsolete - kept for compatibility */ #define FIBMAP _IO(0x00,1) /* bmap access */ #define FIGETBSZ _IO(0x00,2) /* get the block size used for bmap */ #define FIFREEZE _IOWR('X', 119, int) /* Freeze */ #define FITHAW _IOWR('X', 120, int) /* Thaw */ #define FITRIM _IOWR('X', 121, struct fstrim_range) /* Trim */ #define FICLONE _IOW(0x94, 9, int) #define FICLONERANGE _IOW(0x94, 13, struct file_clone_range) #define FIDEDUPERANGE _IOWR(0x94, 54, struct file_dedupe_range) #define FSLABEL_MAX 256 /* Max chars for the interface; each fs may differ */ #define FS_IOC_GETFLAGS _IOR('f', 1, long) #define FS_IOC_SETFLAGS _IOW('f', 2, long) #define FS_IOC_GETVERSION _IOR('v', 1, long) #define FS_IOC_SETVERSION _IOW('v', 2, long) #define FS_IOC_FIEMAP _IOWR('f', 11, struct fiemap) #define FS_IOC32_GETFLAGS _IOR('f', 1, int) #define FS_IOC32_SETFLAGS _IOW('f', 2, int) #define FS_IOC32_GETVERSION _IOR('v', 1, int) #define FS_IOC32_SETVERSION _IOW('v', 2, int) #define FS_IOC_FSGETXATTR _IOR('X', 31, struct fsxattr) #define FS_IOC_FSSETXATTR _IOW('X', 32, struct fsxattr) #define FS_IOC_GETFSLABEL _IOR(0x94, 49, char[FSLABEL_MAX]) #define FS_IOC_SETFSLABEL _IOW(0x94, 50, char[FSLABEL_MAX]) /* * Inode flags (FS_IOC_GETFLAGS / FS_IOC_SETFLAGS) * * Note: for historical reasons, these flags were originally used and * defined for use by ext2/ext3, and then other file systems started * using these flags so they wouldn't need to write their own version * of chattr/lsattr (which was shipped as part of e2fsprogs). You * should think twice before trying to use these flags in new * contexts, or trying to assign these flags, since they are used both * as the UAPI and the on-disk encoding for ext2/3/4. Also, we are * almost out of 32-bit flags. :-) * * We have recently hoisted FS_IOC_FSGETXATTR / FS_IOC_FSSETXATTR from * XFS to the generic FS level interface. This uses a structure that * has padding and hence has more room to grow, so it may be more * appropriate for many new use cases. * * Please do not change these flags or interfaces before checking with * linux-fsdevel@vger.kernel.org and linux-api@vger.kernel.org. */ #define FS_SECRM_FL 0x00000001 /* Secure deletion */ #define FS_UNRM_FL 0x00000002 /* Undelete */ #define FS_COMPR_FL 0x00000004 /* Compress file */ #define FS_SYNC_FL 0x00000008 /* Synchronous updates */ #define FS_IMMUTABLE_FL 0x00000010 /* Immutable file */ #define FS_APPEND_FL 0x00000020 /* writes to file may only append */ #define FS_NODUMP_FL 0x00000040 /* do not dump file */ #define FS_NOATIME_FL 0x00000080 /* do not update atime */ /* Reserved for compression usage... */ #define FS_DIRTY_FL 0x00000100 #define FS_COMPRBLK_FL 0x00000200 /* One or more compressed clusters */ #define FS_NOCOMP_FL 0x00000400 /* Don't compress */ /* End compression flags --- maybe not all used */ #define FS_ENCRYPT_FL 0x00000800 /* Encrypted file */ #define FS_BTREE_FL 0x00001000 /* btree format dir */ #define FS_INDEX_FL 0x00001000 /* hash-indexed directory */ #define FS_IMAGIC_FL 0x00002000 /* AFS directory */ #define FS_JOURNAL_DATA_FL 0x00004000 /* Reserved for ext3 */ #define FS_NOTAIL_FL 0x00008000 /* file tail should not be merged */ #define FS_DIRSYNC_FL 0x00010000 /* dirsync behaviour (directories only) */ #define FS_TOPDIR_FL 0x00020000 /* Top of directory hierarchies*/ #define FS_HUGE_FILE_FL 0x00040000 /* Reserved for ext4 */ #define FS_EXTENT_FL 0x00080000 /* Extents */ #define FS_VERITY_FL 0x00100000 /* Verity protected inode */ #define FS_EA_INODE_FL 0x00200000 /* Inode used for large EA */ #define FS_EOFBLOCKS_FL 0x00400000 /* Reserved for ext4 */ #define FS_NOCOW_FL 0x00800000 /* Do not cow file */ #define FS_DAX_FL 0x02000000 /* Inode is DAX */ #define FS_INLINE_DATA_FL 0x10000000 /* Reserved for ext4 */ #define FS_PROJINHERIT_FL 0x20000000 /* Create with parents projid */ #define FS_CASEFOLD_FL 0x40000000 /* Folder is case insensitive */ #define FS_RESERVED_FL 0x80000000 /* reserved for ext2 lib */ #define FS_FL_USER_VISIBLE 0x0003DFFF /* User visible flags */ #define FS_FL_USER_MODIFIABLE 0x000380FF /* User modifiable flags */ #define SYNC_FILE_RANGE_WAIT_BEFORE 1 #define SYNC_FILE_RANGE_WRITE 2 #define SYNC_FILE_RANGE_WAIT_AFTER 4 #define SYNC_FILE_RANGE_WRITE_AND_WAIT (SYNC_FILE_RANGE_WRITE | \ SYNC_FILE_RANGE_WAIT_BEFORE | \ SYNC_FILE_RANGE_WAIT_AFTER) /* * Flags for preadv2/pwritev2: */ typedef int __bitwise __kernel_rwf_t; /* high priority request, poll if possible */ #define RWF_HIPRI ((__force __kernel_rwf_t)0x00000001) /* per-IO O_DSYNC */ #define RWF_DSYNC ((__force __kernel_rwf_t)0x00000002) /* per-IO O_SYNC */ #define RWF_SYNC ((__force __kernel_rwf_t)0x00000004) /* per-IO, return -EAGAIN if operation would block */ #define RWF_NOWAIT ((__force __kernel_rwf_t)0x00000008) /* per-IO O_APPEND */ #define RWF_APPEND ((__force __kernel_rwf_t)0x00000010) /* mask of flags supported by the kernel */ #define RWF_SUPPORTED (RWF_HIPRI | RWF_DSYNC | RWF_SYNC | RWF_NOWAIT |\ RWF_APPEND) /* Pagemap ioctl */ #define PAGEMAP_SCAN _IOWR('f', 16, struct pm_scan_arg) /* Bitmasks provided in pm_scan_args masks and reported in page_region.categories. */ #define PAGE_IS_WPALLOWED (1 << 0) #define PAGE_IS_WRITTEN (1 << 1) #define PAGE_IS_FILE (1 << 2) #define PAGE_IS_PRESENT (1 << 3) #define PAGE_IS_SWAPPED (1 << 4) #define PAGE_IS_PFNZERO (1 << 5) #define PAGE_IS_HUGE (1 << 6) /* * struct page_region - Page region with flags * @start: Start of the region * @end: End of the region (exclusive) * @categories: PAGE_IS_* category bitmask for the region */ struct page_region { __u64 start; __u64 end; __u64 categories; }; /* Flags for PAGEMAP_SCAN ioctl */ #define PM_SCAN_WP_MATCHING (1 << 0) /* Write protect the pages matched. */ #define PM_SCAN_CHECK_WPASYNC (1 << 1) /* Abort the scan when a non-WP-enabled page is found. */ /* * struct pm_scan_arg - Pagemap ioctl argument * @size: Size of the structure * @flags: Flags for the IOCTL * @start: Starting address of the region * @end: Ending address of the region * @walk_end Address where the scan stopped (written by kernel). * walk_end == end (address tags cleared) informs that the scan completed on entire range. * @vec: Address of page_region struct array for output * @vec_len: Length of the page_region struct array * @max_pages: Optional limit for number of returned pages (0 = disabled) * @category_inverted: PAGE_IS_* categories which values match if 0 instead of 1 * @category_mask: Skip pages for which any category doesn't match * @category_anyof_mask: Skip pages for which no category matches * @return_mask: PAGE_IS_* categories that are to be reported in `page_region`s returned */ struct pm_scan_arg { __u64 size; __u64 flags; __u64 start; __u64 end; __u64 walk_end; __u64 vec; __u64 vec_len; __u64 max_pages; __u64 category_inverted; __u64 category_mask; __u64 category_anyof_mask; __u64 return_mask; }; #endif /* _UAPI_LINUX_FS_H */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1