Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Chang S. Bae | 3229 | 99.51% | 4 | 80.00% |
Reinette Chatre | 16 | 0.49% | 1 | 20.00% |
Total | 3245 | 5 |
// SPDX-License-Identifier: GPL-2.0 #define _GNU_SOURCE #include <err.h> #include <errno.h> #include <pthread.h> #include <setjmp.h> #include <stdio.h> #include <string.h> #include <stdbool.h> #include <unistd.h> #include <x86intrin.h> #include <sys/auxv.h> #include <sys/mman.h> #include <sys/shm.h> #include <sys/ptrace.h> #include <sys/syscall.h> #include <sys/wait.h> #include <sys/uio.h> #include "../kselftest.h" /* For __cpuid_count() */ #ifndef __x86_64__ # error This test is 64-bit only #endif #define XSAVE_HDR_OFFSET 512 #define XSAVE_HDR_SIZE 64 struct xsave_buffer { union { struct { char legacy[XSAVE_HDR_OFFSET]; char header[XSAVE_HDR_SIZE]; char extended[0]; }; char bytes[0]; }; }; static inline uint64_t xgetbv(uint32_t index) { uint32_t eax, edx; asm volatile("xgetbv;" : "=a" (eax), "=d" (edx) : "c" (index)); return eax + ((uint64_t)edx << 32); } static inline void xsave(struct xsave_buffer *xbuf, uint64_t rfbm) { uint32_t rfbm_lo = rfbm; uint32_t rfbm_hi = rfbm >> 32; asm volatile("xsave (%%rdi)" : : "D" (xbuf), "a" (rfbm_lo), "d" (rfbm_hi) : "memory"); } static inline void xrstor(struct xsave_buffer *xbuf, uint64_t rfbm) { uint32_t rfbm_lo = rfbm; uint32_t rfbm_hi = rfbm >> 32; asm volatile("xrstor (%%rdi)" : : "D" (xbuf), "a" (rfbm_lo), "d" (rfbm_hi)); } /* err() exits and will not return */ #define fatal_error(msg, ...) err(1, "[FAIL]\t" msg, ##__VA_ARGS__) static void sethandler(int sig, void (*handler)(int, siginfo_t *, void *), int flags) { struct sigaction sa; memset(&sa, 0, sizeof(sa)); sa.sa_sigaction = handler; sa.sa_flags = SA_SIGINFO | flags; sigemptyset(&sa.sa_mask); if (sigaction(sig, &sa, 0)) fatal_error("sigaction"); } static void clearhandler(int sig) { struct sigaction sa; memset(&sa, 0, sizeof(sa)); sa.sa_handler = SIG_DFL; sigemptyset(&sa.sa_mask); if (sigaction(sig, &sa, 0)) fatal_error("sigaction"); } #define XFEATURE_XTILECFG 17 #define XFEATURE_XTILEDATA 18 #define XFEATURE_MASK_XTILECFG (1 << XFEATURE_XTILECFG) #define XFEATURE_MASK_XTILEDATA (1 << XFEATURE_XTILEDATA) #define XFEATURE_MASK_XTILE (XFEATURE_MASK_XTILECFG | XFEATURE_MASK_XTILEDATA) #define CPUID_LEAF1_ECX_XSAVE_MASK (1 << 26) #define CPUID_LEAF1_ECX_OSXSAVE_MASK (1 << 27) static inline void check_cpuid_xsave(void) { uint32_t eax, ebx, ecx, edx; /* * CPUID.1:ECX.XSAVE[bit 26] enumerates general * support for the XSAVE feature set, including * XGETBV. */ __cpuid_count(1, 0, eax, ebx, ecx, edx); if (!(ecx & CPUID_LEAF1_ECX_XSAVE_MASK)) fatal_error("cpuid: no CPU xsave support"); if (!(ecx & CPUID_LEAF1_ECX_OSXSAVE_MASK)) fatal_error("cpuid: no OS xsave support"); } static uint32_t xbuf_size; static struct { uint32_t xbuf_offset; uint32_t size; } xtiledata; #define CPUID_LEAF_XSTATE 0xd #define CPUID_SUBLEAF_XSTATE_USER 0x0 #define TILE_CPUID 0x1d #define TILE_PALETTE_ID 0x1 static void check_cpuid_xtiledata(void) { uint32_t eax, ebx, ecx, edx; __cpuid_count(CPUID_LEAF_XSTATE, CPUID_SUBLEAF_XSTATE_USER, eax, ebx, ecx, edx); /* * EBX enumerates the size (in bytes) required by the XSAVE * instruction for an XSAVE area containing all the user state * components corresponding to bits currently set in XCR0. * * Stash that off so it can be used to allocate buffers later. */ xbuf_size = ebx; __cpuid_count(CPUID_LEAF_XSTATE, XFEATURE_XTILEDATA, eax, ebx, ecx, edx); /* * eax: XTILEDATA state component size * ebx: XTILEDATA state component offset in user buffer */ if (!eax || !ebx) fatal_error("xstate cpuid: invalid tile data size/offset: %d/%d", eax, ebx); xtiledata.size = eax; xtiledata.xbuf_offset = ebx; } /* The helpers for managing XSAVE buffer and tile states: */ struct xsave_buffer *alloc_xbuf(void) { struct xsave_buffer *xbuf; /* XSAVE buffer should be 64B-aligned. */ xbuf = aligned_alloc(64, xbuf_size); if (!xbuf) fatal_error("aligned_alloc()"); return xbuf; } static inline void clear_xstate_header(struct xsave_buffer *buffer) { memset(&buffer->header, 0, sizeof(buffer->header)); } static inline uint64_t get_xstatebv(struct xsave_buffer *buffer) { /* XSTATE_BV is at the beginning of the header: */ return *(uint64_t *)&buffer->header; } static inline void set_xstatebv(struct xsave_buffer *buffer, uint64_t bv) { /* XSTATE_BV is at the beginning of the header: */ *(uint64_t *)(&buffer->header) = bv; } static void set_rand_tiledata(struct xsave_buffer *xbuf) { int *ptr = (int *)&xbuf->bytes[xtiledata.xbuf_offset]; int data; int i; /* * Ensure that 'data' is never 0. This ensures that * the registers are never in their initial configuration * and thus never tracked as being in the init state. */ data = rand() | 1; for (i = 0; i < xtiledata.size / sizeof(int); i++, ptr++) *ptr = data; } struct xsave_buffer *stashed_xsave; static void init_stashed_xsave(void) { stashed_xsave = alloc_xbuf(); if (!stashed_xsave) fatal_error("failed to allocate stashed_xsave\n"); clear_xstate_header(stashed_xsave); } static void free_stashed_xsave(void) { free(stashed_xsave); } /* See 'struct _fpx_sw_bytes' at sigcontext.h */ #define SW_BYTES_OFFSET 464 /* N.B. The struct's field name varies so read from the offset. */ #define SW_BYTES_BV_OFFSET (SW_BYTES_OFFSET + 8) static inline struct _fpx_sw_bytes *get_fpx_sw_bytes(void *buffer) { return (struct _fpx_sw_bytes *)(buffer + SW_BYTES_OFFSET); } static inline uint64_t get_fpx_sw_bytes_features(void *buffer) { return *(uint64_t *)(buffer + SW_BYTES_BV_OFFSET); } /* Work around printf() being unsafe in signals: */ #define SIGNAL_BUF_LEN 1000 char signal_message_buffer[SIGNAL_BUF_LEN]; void sig_print(char *msg) { int left = SIGNAL_BUF_LEN - strlen(signal_message_buffer) - 1; strncat(signal_message_buffer, msg, left); } static volatile bool noperm_signaled; static int noperm_errs; /* * Signal handler for when AMX is used but * permission has not been obtained. */ static void handle_noperm(int sig, siginfo_t *si, void *ctx_void) { ucontext_t *ctx = (ucontext_t *)ctx_void; void *xbuf = ctx->uc_mcontext.fpregs; struct _fpx_sw_bytes *sw_bytes; uint64_t features; /* Reset the signal message buffer: */ signal_message_buffer[0] = '\0'; sig_print("\tAt SIGILL handler,\n"); if (si->si_code != ILL_ILLOPC) { noperm_errs++; sig_print("[FAIL]\tInvalid signal code.\n"); } else { sig_print("[OK]\tValid signal code (ILL_ILLOPC).\n"); } sw_bytes = get_fpx_sw_bytes(xbuf); /* * Without permission, the signal XSAVE buffer should not * have room for AMX register state (aka. xtiledata). * Check that the size does not overlap with where xtiledata * will reside. * * This also implies that no state components *PAST* * XTILEDATA (features >=19) can be present in the buffer. */ if (sw_bytes->xstate_size <= xtiledata.xbuf_offset) { sig_print("[OK]\tValid xstate size\n"); } else { noperm_errs++; sig_print("[FAIL]\tInvalid xstate size\n"); } features = get_fpx_sw_bytes_features(xbuf); /* * Without permission, the XTILEDATA feature * bit should not be set. */ if ((features & XFEATURE_MASK_XTILEDATA) == 0) { sig_print("[OK]\tValid xstate mask\n"); } else { noperm_errs++; sig_print("[FAIL]\tInvalid xstate mask\n"); } noperm_signaled = true; ctx->uc_mcontext.gregs[REG_RIP] += 3; /* Skip the faulting XRSTOR */ } /* Return true if XRSTOR is successful; otherwise, false. */ static inline bool xrstor_safe(struct xsave_buffer *xbuf, uint64_t mask) { noperm_signaled = false; xrstor(xbuf, mask); /* Print any messages produced by the signal code: */ printf("%s", signal_message_buffer); /* * Reset the buffer to make sure any future printing * only outputs new messages: */ signal_message_buffer[0] = '\0'; if (noperm_errs) fatal_error("saw %d errors in noperm signal handler\n", noperm_errs); return !noperm_signaled; } /* * Use XRSTOR to populate the XTILEDATA registers with * random data. * * Return true if successful; otherwise, false. */ static inline bool load_rand_tiledata(struct xsave_buffer *xbuf) { clear_xstate_header(xbuf); set_xstatebv(xbuf, XFEATURE_MASK_XTILEDATA); set_rand_tiledata(xbuf); return xrstor_safe(xbuf, XFEATURE_MASK_XTILEDATA); } /* Return XTILEDATA to its initial configuration. */ static inline void init_xtiledata(void) { clear_xstate_header(stashed_xsave); xrstor_safe(stashed_xsave, XFEATURE_MASK_XTILEDATA); } enum expected_result { FAIL_EXPECTED, SUCCESS_EXPECTED }; /* arch_prctl() and sigaltstack() test */ #define ARCH_GET_XCOMP_PERM 0x1022 #define ARCH_REQ_XCOMP_PERM 0x1023 static void req_xtiledata_perm(void) { syscall(SYS_arch_prctl, ARCH_REQ_XCOMP_PERM, XFEATURE_XTILEDATA); } static void validate_req_xcomp_perm(enum expected_result exp) { unsigned long bitmask, expected_bitmask; long rc; rc = syscall(SYS_arch_prctl, ARCH_GET_XCOMP_PERM, &bitmask); if (rc) { fatal_error("prctl(ARCH_GET_XCOMP_PERM) error: %ld", rc); } else if (!(bitmask & XFEATURE_MASK_XTILECFG)) { fatal_error("ARCH_GET_XCOMP_PERM returns XFEATURE_XTILECFG off."); } rc = syscall(SYS_arch_prctl, ARCH_REQ_XCOMP_PERM, XFEATURE_XTILEDATA); if (exp == FAIL_EXPECTED) { if (rc) { printf("[OK]\tARCH_REQ_XCOMP_PERM saw expected failure..\n"); return; } fatal_error("ARCH_REQ_XCOMP_PERM saw unexpected success.\n"); } else if (rc) { fatal_error("ARCH_REQ_XCOMP_PERM saw unexpected failure.\n"); } expected_bitmask = bitmask | XFEATURE_MASK_XTILEDATA; rc = syscall(SYS_arch_prctl, ARCH_GET_XCOMP_PERM, &bitmask); if (rc) { fatal_error("prctl(ARCH_GET_XCOMP_PERM) error: %ld", rc); } else if (bitmask != expected_bitmask) { fatal_error("ARCH_REQ_XCOMP_PERM set a wrong bitmask: %lx, expected: %lx.\n", bitmask, expected_bitmask); } else { printf("\tARCH_REQ_XCOMP_PERM is successful.\n"); } } static void validate_xcomp_perm(enum expected_result exp) { bool load_success = load_rand_tiledata(stashed_xsave); if (exp == FAIL_EXPECTED) { if (load_success) { noperm_errs++; printf("[FAIL]\tLoad tiledata succeeded.\n"); } else { printf("[OK]\tLoad tiledata failed.\n"); } } else if (exp == SUCCESS_EXPECTED) { if (load_success) { printf("[OK]\tLoad tiledata succeeded.\n"); } else { noperm_errs++; printf("[FAIL]\tLoad tiledata failed.\n"); } } } #ifndef AT_MINSIGSTKSZ # define AT_MINSIGSTKSZ 51 #endif static void *alloc_altstack(unsigned int size) { void *altstack; altstack = mmap(NULL, size, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS | MAP_STACK, -1, 0); if (altstack == MAP_FAILED) fatal_error("mmap() for altstack"); return altstack; } static void setup_altstack(void *addr, unsigned long size, enum expected_result exp) { stack_t ss; int rc; memset(&ss, 0, sizeof(ss)); ss.ss_size = size; ss.ss_sp = addr; rc = sigaltstack(&ss, NULL); if (exp == FAIL_EXPECTED) { if (rc) { printf("[OK]\tsigaltstack() failed.\n"); } else { fatal_error("sigaltstack() succeeded unexpectedly.\n"); } } else if (rc) { fatal_error("sigaltstack()"); } } static void test_dynamic_sigaltstack(void) { unsigned int small_size, enough_size; unsigned long minsigstksz; void *altstack; minsigstksz = getauxval(AT_MINSIGSTKSZ); printf("\tAT_MINSIGSTKSZ = %lu\n", minsigstksz); /* * getauxval() itself can return 0 for failure or * success. But, in this case, AT_MINSIGSTKSZ * will always return a >=0 value if implemented. * Just check for 0. */ if (minsigstksz == 0) { printf("no support for AT_MINSIGSTKSZ, skipping sigaltstack tests\n"); return; } enough_size = minsigstksz * 2; altstack = alloc_altstack(enough_size); printf("\tAllocate memory for altstack (%u bytes).\n", enough_size); /* * Try setup_altstack() with a size which can not fit * XTILEDATA. ARCH_REQ_XCOMP_PERM should fail. */ small_size = minsigstksz - xtiledata.size; printf("\tAfter sigaltstack() with small size (%u bytes).\n", small_size); setup_altstack(altstack, small_size, SUCCESS_EXPECTED); validate_req_xcomp_perm(FAIL_EXPECTED); /* * Try setup_altstack() with a size derived from * AT_MINSIGSTKSZ. It should be more than large enough * and thus ARCH_REQ_XCOMP_PERM should succeed. */ printf("\tAfter sigaltstack() with enough size (%u bytes).\n", enough_size); setup_altstack(altstack, enough_size, SUCCESS_EXPECTED); validate_req_xcomp_perm(SUCCESS_EXPECTED); /* * Try to coerce setup_altstack() to again accept a * too-small altstack. This ensures that big-enough * sigaltstacks can not shrink to a too-small value * once XTILEDATA permission is established. */ printf("\tThen, sigaltstack() with small size (%u bytes).\n", small_size); setup_altstack(altstack, small_size, FAIL_EXPECTED); } static void test_dynamic_state(void) { pid_t parent, child, grandchild; parent = fork(); if (parent < 0) { /* fork() failed */ fatal_error("fork"); } else if (parent > 0) { int status; /* fork() succeeded. Now in the parent. */ wait(&status); if (!WIFEXITED(status) || WEXITSTATUS(status)) fatal_error("arch_prctl test parent exit"); return; } /* fork() succeeded. Now in the child . */ printf("[RUN]\tCheck ARCH_REQ_XCOMP_PERM around process fork() and sigaltack() test.\n"); printf("\tFork a child.\n"); child = fork(); if (child < 0) { fatal_error("fork"); } else if (child > 0) { int status; wait(&status); if (!WIFEXITED(status) || WEXITSTATUS(status)) fatal_error("arch_prctl test child exit"); _exit(0); } /* * The permission request should fail without an * XTILEDATA-compatible signal stack */ printf("\tTest XCOMP_PERM at child.\n"); validate_xcomp_perm(FAIL_EXPECTED); /* * Set up an XTILEDATA-compatible signal stack and * also obtain permission to populate XTILEDATA. */ printf("\tTest dynamic sigaltstack at child:\n"); test_dynamic_sigaltstack(); /* Ensure that XTILEDATA can be populated. */ printf("\tTest XCOMP_PERM again at child.\n"); validate_xcomp_perm(SUCCESS_EXPECTED); printf("\tFork a grandchild.\n"); grandchild = fork(); if (grandchild < 0) { /* fork() failed */ fatal_error("fork"); } else if (!grandchild) { /* fork() succeeded. Now in the (grand)child. */ printf("\tTest XCOMP_PERM at grandchild.\n"); /* * Ensure that the grandchild inherited * permission and a compatible sigaltstack: */ validate_xcomp_perm(SUCCESS_EXPECTED); } else { int status; /* fork() succeeded. Now in the parent. */ wait(&status); if (!WIFEXITED(status) || WEXITSTATUS(status)) fatal_error("fork test grandchild"); } _exit(0); } static inline int __compare_tiledata_state(struct xsave_buffer *xbuf1, struct xsave_buffer *xbuf2) { return memcmp(&xbuf1->bytes[xtiledata.xbuf_offset], &xbuf2->bytes[xtiledata.xbuf_offset], xtiledata.size); } /* * Save current register state and compare it to @xbuf1.' * * Returns false if @xbuf1 matches the registers. * Returns true if @xbuf1 differs from the registers. */ static inline bool __validate_tiledata_regs(struct xsave_buffer *xbuf1) { struct xsave_buffer *xbuf2; int ret; xbuf2 = alloc_xbuf(); if (!xbuf2) fatal_error("failed to allocate XSAVE buffer\n"); xsave(xbuf2, XFEATURE_MASK_XTILEDATA); ret = __compare_tiledata_state(xbuf1, xbuf2); free(xbuf2); if (ret == 0) return false; return true; } static inline void validate_tiledata_regs_same(struct xsave_buffer *xbuf) { int ret = __validate_tiledata_regs(xbuf); if (ret != 0) fatal_error("TILEDATA registers changed"); } static inline void validate_tiledata_regs_changed(struct xsave_buffer *xbuf) { int ret = __validate_tiledata_regs(xbuf); if (ret == 0) fatal_error("TILEDATA registers did not change"); } /* tiledata inheritance test */ static void test_fork(void) { pid_t child, grandchild; child = fork(); if (child < 0) { /* fork() failed */ fatal_error("fork"); } else if (child > 0) { /* fork() succeeded. Now in the parent. */ int status; wait(&status); if (!WIFEXITED(status) || WEXITSTATUS(status)) fatal_error("fork test child"); return; } /* fork() succeeded. Now in the child. */ printf("[RUN]\tCheck tile data inheritance.\n\tBefore fork(), load tiledata\n"); load_rand_tiledata(stashed_xsave); grandchild = fork(); if (grandchild < 0) { /* fork() failed */ fatal_error("fork"); } else if (grandchild > 0) { /* fork() succeeded. Still in the first child. */ int status; wait(&status); if (!WIFEXITED(status) || WEXITSTATUS(status)) fatal_error("fork test grand child"); _exit(0); } /* fork() succeeded. Now in the (grand)child. */ /* * TILEDATA registers are not preserved across fork(). * Ensure that their value has changed: */ validate_tiledata_regs_changed(stashed_xsave); _exit(0); } /* Context switching test */ static struct _ctxtswtest_cfg { unsigned int iterations; unsigned int num_threads; } ctxtswtest_config; struct futex_info { pthread_t thread; int nr; pthread_mutex_t mutex; struct futex_info *next; }; static void *check_tiledata(void *info) { struct futex_info *finfo = (struct futex_info *)info; struct xsave_buffer *xbuf; int i; xbuf = alloc_xbuf(); if (!xbuf) fatal_error("unable to allocate XSAVE buffer"); /* * Load random data into 'xbuf' and then restore * it to the tile registers themselves. */ load_rand_tiledata(xbuf); for (i = 0; i < ctxtswtest_config.iterations; i++) { pthread_mutex_lock(&finfo->mutex); /* * Ensure the register values have not * diverged from those recorded in 'xbuf'. */ validate_tiledata_regs_same(xbuf); /* Load new, random values into xbuf and registers */ load_rand_tiledata(xbuf); /* * The last thread's last unlock will be for * thread 0's mutex. However, thread 0 will * have already exited the loop and the mutex * will already be unlocked. * * Because this is not an ERRORCHECK mutex, * that inconsistency will be silently ignored. */ pthread_mutex_unlock(&finfo->next->mutex); } free(xbuf); /* * Return this thread's finfo, which is * a unique value for this thread. */ return finfo; } static int create_threads(int num, struct futex_info *finfo) { int i; for (i = 0; i < num; i++) { int next_nr; finfo[i].nr = i; /* * Thread 'i' will wait on this mutex to * be unlocked. Lock it immediately after * initialization: */ pthread_mutex_init(&finfo[i].mutex, NULL); pthread_mutex_lock(&finfo[i].mutex); next_nr = (i + 1) % num; finfo[i].next = &finfo[next_nr]; if (pthread_create(&finfo[i].thread, NULL, check_tiledata, &finfo[i])) fatal_error("pthread_create()"); } return 0; } static void affinitize_cpu0(void) { cpu_set_t cpuset; CPU_ZERO(&cpuset); CPU_SET(0, &cpuset); if (sched_setaffinity(0, sizeof(cpuset), &cpuset) != 0) fatal_error("sched_setaffinity to CPU 0"); } static void test_context_switch(void) { struct futex_info *finfo; int i; /* Affinitize to one CPU to force context switches */ affinitize_cpu0(); req_xtiledata_perm(); printf("[RUN]\tCheck tiledata context switches, %d iterations, %d threads.\n", ctxtswtest_config.iterations, ctxtswtest_config.num_threads); finfo = malloc(sizeof(*finfo) * ctxtswtest_config.num_threads); if (!finfo) fatal_error("malloc()"); create_threads(ctxtswtest_config.num_threads, finfo); /* * This thread wakes up thread 0 * Thread 0 will wake up 1 * Thread 1 will wake up 2 * ... * the last thread will wake up 0 * * ... this will repeat for the configured * number of iterations. */ pthread_mutex_unlock(&finfo[0].mutex); /* Wait for all the threads to finish: */ for (i = 0; i < ctxtswtest_config.num_threads; i++) { void *thread_retval; int rc; rc = pthread_join(finfo[i].thread, &thread_retval); if (rc) fatal_error("pthread_join() failed for thread %d err: %d\n", i, rc); if (thread_retval != &finfo[i]) fatal_error("unexpected thread retval for thread %d: %p\n", i, thread_retval); } printf("[OK]\tNo incorrect case was found.\n"); free(finfo); } /* Ptrace test */ /* * Make sure the ptracee has the expanded kernel buffer on the first * use. Then, initialize the state before performing the state * injection from the ptracer. */ static inline void ptracee_firstuse_tiledata(void) { load_rand_tiledata(stashed_xsave); init_xtiledata(); } /* * Ptracer injects the randomized tile data state. It also reads * before and after that, which will execute the kernel's state copy * functions. So, the tester is advised to double-check any emitted * kernel messages. */ static void ptracer_inject_tiledata(pid_t target) { struct xsave_buffer *xbuf; struct iovec iov; xbuf = alloc_xbuf(); if (!xbuf) fatal_error("unable to allocate XSAVE buffer"); printf("\tRead the init'ed tiledata via ptrace().\n"); iov.iov_base = xbuf; iov.iov_len = xbuf_size; memset(stashed_xsave, 0, xbuf_size); if (ptrace(PTRACE_GETREGSET, target, (uint32_t)NT_X86_XSTATE, &iov)) fatal_error("PTRACE_GETREGSET"); if (!__compare_tiledata_state(stashed_xsave, xbuf)) printf("[OK]\tThe init'ed tiledata was read from ptracee.\n"); else printf("[FAIL]\tThe init'ed tiledata was not read from ptracee.\n"); printf("\tInject tiledata via ptrace().\n"); load_rand_tiledata(xbuf); memcpy(&stashed_xsave->bytes[xtiledata.xbuf_offset], &xbuf->bytes[xtiledata.xbuf_offset], xtiledata.size); if (ptrace(PTRACE_SETREGSET, target, (uint32_t)NT_X86_XSTATE, &iov)) fatal_error("PTRACE_SETREGSET"); if (ptrace(PTRACE_GETREGSET, target, (uint32_t)NT_X86_XSTATE, &iov)) fatal_error("PTRACE_GETREGSET"); if (!__compare_tiledata_state(stashed_xsave, xbuf)) printf("[OK]\tTiledata was correctly written to ptracee.\n"); else printf("[FAIL]\tTiledata was not correctly written to ptracee.\n"); } static void test_ptrace(void) { pid_t child; int status; child = fork(); if (child < 0) { err(1, "fork"); } else if (!child) { if (ptrace(PTRACE_TRACEME, 0, NULL, NULL)) err(1, "PTRACE_TRACEME"); ptracee_firstuse_tiledata(); raise(SIGTRAP); _exit(0); } do { wait(&status); } while (WSTOPSIG(status) != SIGTRAP); ptracer_inject_tiledata(child); ptrace(PTRACE_DETACH, child, NULL, NULL); wait(&status); if (!WIFEXITED(status) || WEXITSTATUS(status)) err(1, "ptrace test"); } int main(void) { /* Check hardware availability at first */ check_cpuid_xsave(); check_cpuid_xtiledata(); init_stashed_xsave(); sethandler(SIGILL, handle_noperm, 0); test_dynamic_state(); /* Request permission for the following tests */ req_xtiledata_perm(); test_fork(); ctxtswtest_config.iterations = 10; ctxtswtest_config.num_threads = 5; test_context_switch(); test_ptrace(); clearhandler(SIGILL); free_stashed_xsave(); return 0; }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1