Contributors: 18
Author Tokens Token Proportion Commits Commit Proportion
Russell King 117 27.53% 6 18.75%
Linus Torvalds (pre-git) 87 20.47% 6 18.75%
Ben Dooks 53 12.47% 2 6.25%
Albin Tonnerre 39 9.18% 1 3.12%
Tony Lindgren 31 7.29% 2 6.25%
Nico Pitre 22 5.18% 3 9.38%
Jinbum Park 15 3.53% 1 3.12%
Arnd Bergmann 11 2.59% 1 3.12%
Jean-Christophe Plagniol-Villard 10 2.35% 1 3.12%
Linus Torvalds 8 1.88% 1 3.12%
Uwe Zeisberger 8 1.88% 1 3.12%
Rusty Russell 7 1.65% 1 3.12%
Bart Van Assche 5 1.18% 1 3.12%
Stephen Boyd 5 1.18% 1 3.12%
Al Viro 3 0.71% 1 3.12%
Thomas Petazzoni 2 0.47% 1 3.12%
Shawn Guo 1 0.24% 1 3.12%
Greg Kroah-Hartman 1 0.24% 1 3.12%
Total 425 32


// SPDX-License-Identifier: GPL-2.0
/*
 * misc.c
 * 
 * This is a collection of several routines from gzip-1.0.3 
 * adapted for Linux.
 *
 * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
 *
 * Modified for ARM Linux by Russell King
 *
 * Nicolas Pitre <nico@visuaide.com>  1999/04/14 :
 *  For this code to run directly from Flash, all constant variables must
 *  be marked with 'const' and all other variables initialized at run-time 
 *  only.  This way all non constant variables will end up in the bss segment,
 *  which should point to addresses in RAM and cleared to 0 on start.
 *  This allows for a much quicker boot time.
 */

unsigned int __machine_arch_type;

#include <linux/compiler.h>	/* for inline */
#include <linux/types.h>
#include <linux/linkage.h>
#include "misc.h"
#ifdef CONFIG_ARCH_EP93XX
#include "misc-ep93xx.h"
#endif

static void putstr(const char *ptr);

#include CONFIG_UNCOMPRESS_INCLUDE

#ifdef CONFIG_DEBUG_ICEDCC

#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)

static void icedcc_putc(int ch)
{
	int status, i = 0x4000000;

	do {
		if (--i < 0)
			return;

		asm volatile ("mrc p14, 0, %0, c0, c1, 0" : "=r" (status));
	} while (status & (1 << 29));

	asm("mcr p14, 0, %0, c0, c5, 0" : : "r" (ch));
}


#elif defined(CONFIG_CPU_XSCALE)

static void icedcc_putc(int ch)
{
	int status, i = 0x4000000;

	do {
		if (--i < 0)
			return;

		asm volatile ("mrc p14, 0, %0, c14, c0, 0" : "=r" (status));
	} while (status & (1 << 28));

	asm("mcr p14, 0, %0, c8, c0, 0" : : "r" (ch));
}

#else

static void icedcc_putc(int ch)
{
	int status, i = 0x4000000;

	do {
		if (--i < 0)
			return;

		asm volatile ("mrc p14, 0, %0, c0, c0, 0" : "=r" (status));
	} while (status & 2);

	asm("mcr p14, 0, %0, c1, c0, 0" : : "r" (ch));
}

#endif

#define putc(ch)	icedcc_putc(ch)
#endif

static void putstr(const char *ptr)
{
	char c;

	while ((c = *ptr++) != '\0') {
		if (c == '\n')
			putc('\r');
		putc(c);
	}

	flush();
}

/*
 * gzip declarations
 */
unsigned char *output_data;

unsigned long free_mem_ptr;
unsigned long free_mem_end_ptr;

#ifndef arch_error
#define arch_error(x)
#endif

void error(char *x)
{
	arch_error(x);

	putstr("\n\n");
	putstr(x);
	putstr("\n\n -- System halted");

	while(1);	/* Halt */
}

asmlinkage void __div0(void)
{
	error("Attempting division by 0!");
}

void
decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
		unsigned long free_mem_ptr_end_p,
		int arch_id)
{
	int ret;

	output_data		= (unsigned char *)output_start;
	free_mem_ptr		= free_mem_ptr_p;
	free_mem_end_ptr	= free_mem_ptr_end_p;
	__machine_arch_type	= arch_id;

#ifdef CONFIG_ARCH_EP93XX
	ep93xx_decomp_setup();
#endif
	arch_decomp_setup();

	putstr("Uncompressing Linux...");
	ret = do_decompress(input_data, input_data_end - input_data,
			    output_data, error);
	if (ret)
		error("decompressor returned an error");
	else
		putstr(" done, booting the kernel.\n");
}

void fortify_panic(const char *name)
{
	error("detected buffer overflow");
}