Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Kent Overstreet | 590 | 99.83% | 13 | 92.86% |
Randy Dunlap | 1 | 0.17% | 1 | 7.14% |
Total | 591 | 14 |
/* SPDX-License-Identifier: GPL-2.0 */ #ifndef _LINUX_SIX_H #define _LINUX_SIX_H /** * DOC: SIX locks overview * * Shared/intent/exclusive locks: sleepable read/write locks, like rw semaphores * but with an additional state: read/shared, intent, exclusive/write * * The purpose of the intent state is to allow for greater concurrency on tree * structures without deadlocking. In general, a read can't be upgraded to a * write lock without deadlocking, so an operation that updates multiple nodes * will have to take write locks for the full duration of the operation. * * But by adding an intent state, which is exclusive with other intent locks but * not with readers, we can take intent locks at the start of the operation, * and then take write locks only for the actual update to each individual * nodes, without deadlocking. * * Example usage: * six_lock_read(&foo->lock); * six_unlock_read(&foo->lock); * * An intent lock must be held before taking a write lock: * six_lock_intent(&foo->lock); * six_lock_write(&foo->lock); * six_unlock_write(&foo->lock); * six_unlock_intent(&foo->lock); * * Other operations: * six_trylock_read() * six_trylock_intent() * six_trylock_write() * * six_lock_downgrade() convert from intent to read * six_lock_tryupgrade() attempt to convert from read to intent, may fail * * There are also interfaces that take the lock type as an enum: * * six_lock_type(&foo->lock, SIX_LOCK_read); * six_trylock_convert(&foo->lock, SIX_LOCK_read, SIX_LOCK_intent) * six_lock_type(&foo->lock, SIX_LOCK_write); * six_unlock_type(&foo->lock, SIX_LOCK_write); * six_unlock_type(&foo->lock, SIX_LOCK_intent); * * Lock sequence numbers - unlock(), relock(): * * Locks embed sequences numbers, which are incremented on write lock/unlock. * This allows locks to be dropped and the retaken iff the state they protect * hasn't changed; this makes it much easier to avoid holding locks while e.g. * doing IO or allocating memory. * * Example usage: * six_lock_read(&foo->lock); * u32 seq = six_lock_seq(&foo->lock); * six_unlock_read(&foo->lock); * * some_operation_that_may_block(); * * if (six_relock_read(&foo->lock, seq)) { ... } * * If the relock operation succeeds, it is as if the lock was never unlocked. * * Reentrancy: * * Six locks are not by themselves reentrant, but have counters for both the * read and intent states that can be used to provide reentrancy by an upper * layer that tracks held locks. If a lock is known to already be held in the * read or intent state, six_lock_increment() can be used to bump the "lock * held in this state" counter, increasing the number of unlock calls that * will be required to fully unlock it. * * Example usage: * six_lock_read(&foo->lock); * six_lock_increment(&foo->lock, SIX_LOCK_read); * six_unlock_read(&foo->lock); * six_unlock_read(&foo->lock); * foo->lock is now fully unlocked. * * Since the intent state supercedes read, it's legal to increment the read * counter when holding an intent lock, but not the reverse. * * A lock may only be held once for write: six_lock_increment(.., SIX_LOCK_write) * is not legal. * * should_sleep_fn: * * There is a six_lock() variant that takes a function pointer that is called * immediately prior to schedule() when blocking, and may return an error to * abort. * * One possible use for this feature is when objects being locked are part of * a cache and may reused, and lock ordering is based on a property of the * object that will change when the object is reused - i.e. logical key order. * * If looking up an object in the cache may race with object reuse, and lock * ordering is required to prevent deadlock, object reuse may change the * correct lock order for that object and cause a deadlock. should_sleep_fn * can be used to check if the object is still the object we want and avoid * this deadlock. * * Wait list entry interface: * * There is a six_lock() variant, six_lock_waiter(), that takes a pointer to a * wait list entry. By embedding six_lock_waiter into another object, and by * traversing lock waitlists, it is then possible for an upper layer to * implement full cycle detection for deadlock avoidance. * * should_sleep_fn should be used for invoking the cycle detector, walking the * graph of held locks to check for a deadlock. The upper layer must track * held locks for each thread, and each thread's held locks must be reachable * from its six_lock_waiter object. * * six_lock_waiter() will add the wait object to the waitlist re-trying taking * the lock, and before calling should_sleep_fn, and the wait object will not * be removed from the waitlist until either the lock has been successfully * acquired, or we aborted because should_sleep_fn returned an error. * * Also, six_lock_waiter contains a timestamp, and waiters on a waitlist will * have timestamps in strictly ascending order - this is so the timestamp can * be used as a cursor for lock graph traverse. */ #include <linux/lockdep.h> #include <linux/sched.h> #include <linux/types.h> enum six_lock_type { SIX_LOCK_read, SIX_LOCK_intent, SIX_LOCK_write, }; struct six_lock { atomic_t state; u32 seq; unsigned intent_lock_recurse; struct task_struct *owner; unsigned __percpu *readers; raw_spinlock_t wait_lock; struct list_head wait_list; #ifdef CONFIG_DEBUG_LOCK_ALLOC struct lockdep_map dep_map; #endif }; struct six_lock_waiter { struct list_head list; struct task_struct *task; enum six_lock_type lock_want; bool lock_acquired; u64 start_time; }; typedef int (*six_lock_should_sleep_fn)(struct six_lock *lock, void *); void six_lock_exit(struct six_lock *lock); enum six_lock_init_flags { SIX_LOCK_INIT_PCPU = 1U << 0, }; void __six_lock_init(struct six_lock *lock, const char *name, struct lock_class_key *key, enum six_lock_init_flags flags); /** * six_lock_init - initialize a six lock * @lock: lock to initialize * @flags: optional flags, i.e. SIX_LOCK_INIT_PCPU */ #define six_lock_init(lock, flags) \ do { \ static struct lock_class_key __key; \ \ __six_lock_init((lock), #lock, &__key, flags); \ } while (0) /** * six_lock_seq - obtain current lock sequence number * @lock: six_lock to obtain sequence number for * * @lock should be held for read or intent, and not write * * By saving the lock sequence number, we can unlock @lock and then (typically * after some blocking operation) attempt to relock it: the relock will succeed * if the sequence number hasn't changed, meaning no write locks have been taken * and state corresponding to what @lock protects is still valid. */ static inline u32 six_lock_seq(const struct six_lock *lock) { return lock->seq; } bool six_trylock_ip(struct six_lock *lock, enum six_lock_type type, unsigned long ip); /** * six_trylock_type - attempt to take a six lock without blocking * @lock: lock to take * @type: SIX_LOCK_read, SIX_LOCK_intent, or SIX_LOCK_write * * Return: true on success, false on failure. */ static inline bool six_trylock_type(struct six_lock *lock, enum six_lock_type type) { return six_trylock_ip(lock, type, _THIS_IP_); } int six_lock_ip_waiter(struct six_lock *lock, enum six_lock_type type, struct six_lock_waiter *wait, six_lock_should_sleep_fn should_sleep_fn, void *p, unsigned long ip); /** * six_lock_waiter - take a lock, with full waitlist interface * @lock: lock to take * @type: SIX_LOCK_read, SIX_LOCK_intent, or SIX_LOCK_write * @wait: pointer to wait object, which will be added to lock's waitlist * @should_sleep_fn: callback run after adding to waitlist, immediately prior * to scheduling * @p: passed through to @should_sleep_fn * * This is a convenience wrapper around six_lock_ip_waiter(), see that function * for full documentation. * * Return: 0 on success, or the return code from @should_sleep_fn on failure. */ static inline int six_lock_waiter(struct six_lock *lock, enum six_lock_type type, struct six_lock_waiter *wait, six_lock_should_sleep_fn should_sleep_fn, void *p) { return six_lock_ip_waiter(lock, type, wait, should_sleep_fn, p, _THIS_IP_); } /** * six_lock_ip - take a six lock lock * @lock: lock to take * @type: SIX_LOCK_read, SIX_LOCK_intent, or SIX_LOCK_write * @should_sleep_fn: callback run after adding to waitlist, immediately prior * to scheduling * @p: passed through to @should_sleep_fn * @ip: ip parameter for lockdep/lockstat, i.e. _THIS_IP_ * * Return: 0 on success, or the return code from @should_sleep_fn on failure. */ static inline int six_lock_ip(struct six_lock *lock, enum six_lock_type type, six_lock_should_sleep_fn should_sleep_fn, void *p, unsigned long ip) { struct six_lock_waiter wait; return six_lock_ip_waiter(lock, type, &wait, should_sleep_fn, p, ip); } /** * six_lock_type - take a six lock lock * @lock: lock to take * @type: SIX_LOCK_read, SIX_LOCK_intent, or SIX_LOCK_write * @should_sleep_fn: callback run after adding to waitlist, immediately prior * to scheduling * @p: passed through to @should_sleep_fn * * Return: 0 on success, or the return code from @should_sleep_fn on failure. */ static inline int six_lock_type(struct six_lock *lock, enum six_lock_type type, six_lock_should_sleep_fn should_sleep_fn, void *p) { struct six_lock_waiter wait; return six_lock_ip_waiter(lock, type, &wait, should_sleep_fn, p, _THIS_IP_); } bool six_relock_ip(struct six_lock *lock, enum six_lock_type type, unsigned seq, unsigned long ip); /** * six_relock_type - attempt to re-take a lock that was held previously * @lock: lock to take * @type: SIX_LOCK_read, SIX_LOCK_intent, or SIX_LOCK_write * @seq: lock sequence number obtained from six_lock_seq() while lock was * held previously * * Return: true on success, false on failure. */ static inline bool six_relock_type(struct six_lock *lock, enum six_lock_type type, unsigned seq) { return six_relock_ip(lock, type, seq, _THIS_IP_); } void six_unlock_ip(struct six_lock *lock, enum six_lock_type type, unsigned long ip); /** * six_unlock_type - drop a six lock * @lock: lock to unlock * @type: SIX_LOCK_read, SIX_LOCK_intent, or SIX_LOCK_write * * When a lock is held multiple times (because six_lock_incement()) was used), * this decrements the 'lock held' counter by one. * * For example: * six_lock_read(&foo->lock); read count 1 * six_lock_increment(&foo->lock, SIX_LOCK_read); read count 2 * six_lock_unlock(&foo->lock, SIX_LOCK_read); read count 1 * six_lock_unlock(&foo->lock, SIX_LOCK_read); read count 0 */ static inline void six_unlock_type(struct six_lock *lock, enum six_lock_type type) { six_unlock_ip(lock, type, _THIS_IP_); } #define __SIX_LOCK(type) \ static inline bool six_trylock_ip_##type(struct six_lock *lock, unsigned long ip)\ { \ return six_trylock_ip(lock, SIX_LOCK_##type, ip); \ } \ \ static inline bool six_trylock_##type(struct six_lock *lock) \ { \ return six_trylock_ip(lock, SIX_LOCK_##type, _THIS_IP_); \ } \ \ static inline int six_lock_ip_waiter_##type(struct six_lock *lock, \ struct six_lock_waiter *wait, \ six_lock_should_sleep_fn should_sleep_fn, void *p,\ unsigned long ip) \ { \ return six_lock_ip_waiter(lock, SIX_LOCK_##type, wait, should_sleep_fn, p, ip);\ } \ \ static inline int six_lock_ip_##type(struct six_lock *lock, \ six_lock_should_sleep_fn should_sleep_fn, void *p, \ unsigned long ip) \ { \ return six_lock_ip(lock, SIX_LOCK_##type, should_sleep_fn, p, ip);\ } \ \ static inline bool six_relock_ip_##type(struct six_lock *lock, u32 seq, unsigned long ip)\ { \ return six_relock_ip(lock, SIX_LOCK_##type, seq, ip); \ } \ \ static inline bool six_relock_##type(struct six_lock *lock, u32 seq) \ { \ return six_relock_ip(lock, SIX_LOCK_##type, seq, _THIS_IP_); \ } \ \ static inline int six_lock_##type(struct six_lock *lock, \ six_lock_should_sleep_fn fn, void *p)\ { \ return six_lock_ip_##type(lock, fn, p, _THIS_IP_); \ } \ \ static inline void six_unlock_ip_##type(struct six_lock *lock, unsigned long ip) \ { \ six_unlock_ip(lock, SIX_LOCK_##type, ip); \ } \ \ static inline void six_unlock_##type(struct six_lock *lock) \ { \ six_unlock_ip(lock, SIX_LOCK_##type, _THIS_IP_); \ } __SIX_LOCK(read) __SIX_LOCK(intent) __SIX_LOCK(write) #undef __SIX_LOCK void six_lock_downgrade(struct six_lock *); bool six_lock_tryupgrade(struct six_lock *); bool six_trylock_convert(struct six_lock *, enum six_lock_type, enum six_lock_type); void six_lock_increment(struct six_lock *, enum six_lock_type); void six_lock_wakeup_all(struct six_lock *); struct six_lock_count { unsigned n[3]; }; struct six_lock_count six_lock_counts(struct six_lock *); void six_lock_readers_add(struct six_lock *, int); #endif /* _LINUX_SIX_H */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1