| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Matthew Sakai | 653 | 97.61% | 2 | 50.00% |
| Mike Snitzer | 16 | 2.39% | 2 | 50.00% |
| Total | 669 | 4 |
/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright 2023 Red Hat */ #ifndef VDO_RECOVERY_JOURNAL_H #define VDO_RECOVERY_JOURNAL_H #include <linux/list.h> #include "numeric.h" #include "admin-state.h" #include "constants.h" #include "encodings.h" #include "flush.h" #include "statistics.h" #include "types.h" #include "wait-queue.h" /** * DOC: recovery journal. * * The recovery_journal provides a log of all block mapping and reference count changes which have * not yet been stably written to the block map or slab journals. This log helps to reduce the * write amplification of writes by providing amortization of slab journal and block map page * updates. * * The recovery journal has a single dedicated queue and thread for performing all journal updates. * The concurrency guarantees of this single-threaded model allow the code to omit more * fine-grained locking for recovery journal structures. * * The journal consists of a set of on-disk blocks arranged as a circular log with monotonically * increasing sequence numbers. Three sequence numbers serve to define the active extent of the * journal. The 'head' is the oldest active block in the journal. The 'tail' is the end of the * half-open interval containing the active blocks. 'active' is the number of the block actively * receiving entries. In an empty journal, head == active == tail. Once any entries are added, tail * = active + 1, and head may be any value in the interval [tail - size, active]. * * The journal also contains a set of in-memory blocks which are used to buffer up entries until * they can be committed. In general the number of in-memory blocks ('tail_buffer_count') will be * less than the on-disk size. Each in-memory block is also a vdo_completion. Each in-memory block * has a vio which is used to commit that block to disk. The vio's data is the on-disk * representation of the journal block. In addition each in-memory block has a buffer which is used * to accumulate entries while a partial commit of the block is in progress. In-memory blocks are * kept on two rings. Free blocks live on the 'free_tail_blocks' ring. When a block becomes active * (see below) it is moved to the 'active_tail_blocks' ring. When a block is fully committed, it is * moved back to the 'free_tail_blocks' ring. * * When entries are added to the journal, they are added to the active in-memory block, as * indicated by the 'active_block' field. If the caller wishes to wait for the entry to be * committed, the requesting VIO will be attached to the in-memory block to which the caller's * entry was added. If the caller does wish to wait, or if the entry filled the active block, an * attempt will be made to commit that block to disk. If there is already another commit in * progress, the attempt will be ignored and then automatically retried when the in-progress commit * completes. If there is no commit in progress, any data_vios waiting on the block are transferred * to the block's vio which is then written, automatically waking all of the waiters when it * completes. When the write completes, any entries which accumulated in the block are copied to * the vio's data buffer. * * Finally, the journal maintains a set of counters, one for each on disk journal block. These * counters are used as locks to prevent premature reaping of journal blocks. Each time a new * sequence number is used, the counter for the corresponding block is incremented. The counter is * subsequently decremented when that block is filled and then committed for the last time. This * prevents blocks from being reaped while they are still being updated. The counter is also * incremented once for each entry added to a block, and decremented once each time the block map * is updated in memory for that request. This prevents blocks from being reaped while their VIOs * are still active. Finally, each in-memory block map page tracks the oldest journal block that * contains entries corresponding to uncommitted updates to that block map page. Each time an * in-memory block map page is updated, it checks if the journal block for the VIO is earlier than * the one it references, in which case it increments the count on the earlier journal block and * decrements the count on the later journal block, maintaining a lock on the oldest journal block * containing entries for that page. When a block map page has been flushed from the cache, the * counter for the journal block it references is decremented. Whenever the counter for the head * block goes to 0, the head is advanced until it comes to a block whose counter is not 0 or until * it reaches the active block. This is the mechanism for reclaiming journal space on disk. * * If there is no in-memory space when a VIO attempts to add an entry, the VIO will be attached to * the 'commit_completion' and will be woken the next time a full block has committed. If there is * no on-disk space when a VIO attempts to add an entry, the VIO will be attached to the * 'reap_completion', and will be woken the next time a journal block is reaped. */ enum vdo_zone_type { VDO_ZONE_TYPE_ADMIN, VDO_ZONE_TYPE_JOURNAL, VDO_ZONE_TYPE_LOGICAL, VDO_ZONE_TYPE_PHYSICAL, }; struct lock_counter { /* The completion for notifying the owner of a lock release */ struct vdo_completion completion; /* The number of logical zones which may hold locks */ zone_count_t logical_zones; /* The number of physical zones which may hold locks */ zone_count_t physical_zones; /* The number of locks */ block_count_t locks; /* Whether the lock release notification is in flight */ atomic_t state; /* The number of logical zones which hold each lock */ atomic_t *logical_zone_counts; /* The number of physical zones which hold each lock */ atomic_t *physical_zone_counts; /* The per-lock counts for the journal zone */ u16 *journal_counters; /* The per-lock decrement counts for the journal zone */ atomic_t *journal_decrement_counts; /* The per-zone, per-lock reference counts for logical zones */ u16 *logical_counters; /* The per-zone, per-lock reference counts for physical zones */ u16 *physical_counters; }; struct recovery_journal_block { /* The doubly linked pointers for the free or active lists */ struct list_head list_node; /* The waiter for the pending full block list */ struct vdo_waiter write_waiter; /* The journal to which this block belongs */ struct recovery_journal *journal; /* A pointer to the current sector in the packed block buffer */ struct packed_journal_sector *sector; /* The vio for writing this block */ struct vio vio; /* The sequence number for this block */ sequence_number_t sequence_number; /* The location of this block in the on-disk journal */ physical_block_number_t block_number; /* Whether this block is being committed */ bool committing; /* The total number of entries in this block */ journal_entry_count_t entry_count; /* The total number of uncommitted entries (queued or committing) */ journal_entry_count_t uncommitted_entry_count; /* The number of new entries in the current commit */ journal_entry_count_t entries_in_commit; /* The queue of vios which will make entries for the next commit */ struct vdo_wait_queue entry_waiters; /* The queue of vios waiting for the current commit */ struct vdo_wait_queue commit_waiters; }; struct recovery_journal { /* The thread ID of the journal zone */ thread_id_t thread_id; /* The slab depot which can hold locks on this journal */ struct slab_depot *depot; /* The block map which can hold locks on this journal */ struct block_map *block_map; /* The queue of vios waiting to make entries */ struct vdo_wait_queue entry_waiters; /* The number of free entries in the journal */ u64 available_space; /* The number of decrement entries which need to be made */ data_vio_count_t pending_decrement_count; /* Whether the journal is adding entries from the increment or decrement waiters queues */ bool adding_entries; /* The administrative state of the journal */ struct admin_state state; /* Whether a reap is in progress */ bool reaping; /* The location of the first journal block */ physical_block_number_t origin; /* The oldest active block in the journal on disk for block map rebuild */ sequence_number_t block_map_head; /* The oldest active block in the journal on disk for slab journal replay */ sequence_number_t slab_journal_head; /* The newest block in the journal on disk to which a write has finished */ sequence_number_t last_write_acknowledged; /* The end of the half-open interval of the active journal */ sequence_number_t tail; /* The point at which the last entry will have been added */ struct journal_point append_point; /* The journal point of the vio most recently released from the journal */ struct journal_point commit_point; /* The nonce of the VDO */ nonce_t nonce; /* The number of recoveries completed by the VDO */ u8 recovery_count; /* The number of entries which fit in a single block */ journal_entry_count_t entries_per_block; /* Unused in-memory journal blocks */ struct list_head free_tail_blocks; /* In-memory journal blocks with records */ struct list_head active_tail_blocks; /* A pointer to the active block (the one we are adding entries to now) */ struct recovery_journal_block *active_block; /* Journal blocks that need writing */ struct vdo_wait_queue pending_writes; /* The new block map reap head after reaping */ sequence_number_t block_map_reap_head; /* The head block number for the block map rebuild range */ block_count_t block_map_head_block_number; /* The new slab journal reap head after reaping */ sequence_number_t slab_journal_reap_head; /* The head block number for the slab journal replay range */ block_count_t slab_journal_head_block_number; /* The data-less vio, usable only for flushing */ struct vio *flush_vio; /* The number of blocks in the on-disk journal */ block_count_t size; /* The number of logical blocks that are in-use */ block_count_t logical_blocks_used; /* The number of block map pages that are allocated */ block_count_t block_map_data_blocks; /* The number of journal blocks written but not yet acknowledged */ block_count_t pending_write_count; /* The threshold at which slab journal tail blocks will be written out */ block_count_t slab_journal_commit_threshold; /* Counters for events in the journal that are reported as statistics */ struct recovery_journal_statistics events; /* The locks for each on-disk block */ struct lock_counter lock_counter; /* The tail blocks */ struct recovery_journal_block blocks[]; }; /** * vdo_get_recovery_journal_block_number() - Get the physical block number for a given sequence * number. * @journal: The journal. * @sequence: The sequence number of the desired block. * * Return: The block number corresponding to the sequence number. */ static inline physical_block_number_t __must_check vdo_get_recovery_journal_block_number(const struct recovery_journal *journal, sequence_number_t sequence) { /* * Since journal size is a power of two, the block number modulus can just be extracted * from the low-order bits of the sequence. */ return vdo_compute_recovery_journal_block_number(journal->size, sequence); } /** * vdo_compute_recovery_journal_check_byte() - Compute the check byte for a given sequence number. * @journal: The journal. * @sequence: The sequence number. * * Return: The check byte corresponding to the sequence number. */ static inline u8 __must_check vdo_compute_recovery_journal_check_byte(const struct recovery_journal *journal, sequence_number_t sequence) { /* The check byte must change with each trip around the journal. */ return (((sequence / journal->size) & 0x7F) | 0x80); } int __must_check vdo_decode_recovery_journal(struct recovery_journal_state_7_0 state, nonce_t nonce, struct vdo *vdo, struct partition *partition, u64 recovery_count, block_count_t journal_size, struct recovery_journal **journal_ptr); void vdo_free_recovery_journal(struct recovery_journal *journal); void vdo_initialize_recovery_journal_post_repair(struct recovery_journal *journal, u64 recovery_count, sequence_number_t tail, block_count_t logical_blocks_used, block_count_t block_map_data_blocks); block_count_t __must_check vdo_get_journal_block_map_data_blocks_used(struct recovery_journal *journal); thread_id_t __must_check vdo_get_recovery_journal_thread_id(struct recovery_journal *journal); void vdo_open_recovery_journal(struct recovery_journal *journal, struct slab_depot *depot, struct block_map *block_map); sequence_number_t vdo_get_recovery_journal_current_sequence_number(struct recovery_journal *journal); block_count_t __must_check vdo_get_recovery_journal_length(block_count_t journal_size); struct recovery_journal_state_7_0 __must_check vdo_record_recovery_journal(const struct recovery_journal *journal); void vdo_add_recovery_journal_entry(struct recovery_journal *journal, struct data_vio *data_vio); void vdo_acquire_recovery_journal_block_reference(struct recovery_journal *journal, sequence_number_t sequence_number, enum vdo_zone_type zone_type, zone_count_t zone_id); void vdo_release_recovery_journal_block_reference(struct recovery_journal *journal, sequence_number_t sequence_number, enum vdo_zone_type zone_type, zone_count_t zone_id); void vdo_release_journal_entry_lock(struct recovery_journal *journal, sequence_number_t sequence_number); void vdo_drain_recovery_journal(struct recovery_journal *journal, const struct admin_state_code *operation, struct vdo_completion *parent); void vdo_resume_recovery_journal(struct recovery_journal *journal, struct vdo_completion *parent); block_count_t __must_check vdo_get_recovery_journal_logical_blocks_used(const struct recovery_journal *journal); struct recovery_journal_statistics __must_check vdo_get_recovery_journal_statistics(const struct recovery_journal *journal); void vdo_dump_recovery_journal_statistics(const struct recovery_journal *journal); #endif /* VDO_RECOVERY_JOURNAL_H */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1