| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Dave Kleikamp | 4300 | 49.64% | 2 | 1.37% |
| Jan Kara | 2110 | 24.36% | 50 | 34.25% |
| Theodore Y. Ts'o | 902 | 10.41% | 27 | 18.49% |
| Thomas Gleixner | 191 | 2.20% | 2 | 1.37% |
| Lukas Czerner | 129 | 1.49% | 4 | 2.74% |
| zhangyi (F) | 122 | 1.41% | 6 | 4.11% |
| Josef Bacik | 115 | 1.33% | 3 | 2.05% |
| Ritesh Harjani | 112 | 1.29% | 5 | 3.42% |
| Joel Becker | 105 | 1.21% | 2 | 1.37% |
| Yongqiang Yang | 88 | 1.02% | 1 | 0.68% |
| Ross Zwisler | 75 | 0.87% | 1 | 0.68% |
| Zhihao Cheng | 65 | 0.75% | 3 | 2.05% |
| Mingming Cao | 61 | 0.70% | 5 | 3.42% |
| Matthew Wilcox | 39 | 0.45% | 2 | 1.37% |
| Ding Dinghua | 39 | 0.45% | 2 | 1.37% |
| Michal Hocko | 32 | 0.37% | 3 | 2.05% |
| Johann Lombardi | 30 | 0.35% | 1 | 0.68% |
| Eric Sandeen | 22 | 0.25% | 3 | 2.05% |
| Xiaoguang Wang | 22 | 0.25% | 1 | 0.68% |
| Junxiao Bi | 20 | 0.23% | 1 | 0.68% |
| Qian Cai | 14 | 0.16% | 1 | 0.68% |
| Mauro Carvalho Chehab | 12 | 0.14% | 1 | 0.68% |
| Chengguang Xu | 11 | 0.13% | 1 | 0.68% |
| Dmitriy Monakhov | 8 | 0.09% | 4 | 2.74% |
| Dan Carpenter | 8 | 0.09% | 2 | 1.37% |
| Tao Ma | 6 | 0.07% | 1 | 0.68% |
| wangyan | 4 | 0.05% | 1 | 0.68% |
| Adrian Bunk | 4 | 0.05% | 1 | 0.68% |
| Randy Dunlap | 3 | 0.03% | 1 | 0.68% |
| Andrew Perepechko | 3 | 0.03% | 1 | 0.68% |
| Liu Song | 3 | 0.03% | 1 | 0.68% |
| Linus Torvalds | 2 | 0.02% | 1 | 0.68% |
| Adam Buchbinder | 1 | 0.01% | 1 | 0.68% |
| Taesoo Kim | 1 | 0.01% | 1 | 0.68% |
| Tahsin Erdogan | 1 | 0.01% | 1 | 0.68% |
| Li Yang | 1 | 0.01% | 1 | 0.68% |
| Neil Brown | 1 | 0.01% | 1 | 0.68% |
| Andreas Dilger | 1 | 0.01% | 1 | 0.68% |
| Total | 8663 | 146 |
// SPDX-License-Identifier: GPL-2.0+ /* * linux/fs/jbd2/transaction.c * * Written by Stephen C. Tweedie <sct@redhat.com>, 1998 * * Copyright 1998 Red Hat corp --- All Rights Reserved * * Generic filesystem transaction handling code; part of the ext2fs * journaling system. * * This file manages transactions (compound commits managed by the * journaling code) and handles (individual atomic operations by the * filesystem). */ #include <linux/time.h> #include <linux/fs.h> #include <linux/jbd2.h> #include <linux/errno.h> #include <linux/slab.h> #include <linux/timer.h> #include <linux/mm.h> #include <linux/highmem.h> #include <linux/hrtimer.h> #include <linux/backing-dev.h> #include <linux/bug.h> #include <linux/module.h> #include <linux/sched/mm.h> #include <trace/events/jbd2.h> static void __jbd2_journal_temp_unlink_buffer(struct journal_head *jh); static void __jbd2_journal_unfile_buffer(struct journal_head *jh); static struct kmem_cache *transaction_cache; int __init jbd2_journal_init_transaction_cache(void) { J_ASSERT(!transaction_cache); transaction_cache = kmem_cache_create("jbd2_transaction_s", sizeof(transaction_t), 0, SLAB_HWCACHE_ALIGN|SLAB_TEMPORARY, NULL); if (!transaction_cache) { pr_emerg("JBD2: failed to create transaction cache\n"); return -ENOMEM; } return 0; } void jbd2_journal_destroy_transaction_cache(void) { kmem_cache_destroy(transaction_cache); transaction_cache = NULL; } void jbd2_journal_free_transaction(transaction_t *transaction) { if (unlikely(ZERO_OR_NULL_PTR(transaction))) return; kmem_cache_free(transaction_cache, transaction); } /* * Base amount of descriptor blocks we reserve for each transaction. */ static int jbd2_descriptor_blocks_per_trans(journal_t *journal) { int tag_space = journal->j_blocksize - sizeof(journal_header_t); int tags_per_block; /* Subtract UUID */ tag_space -= 16; if (jbd2_journal_has_csum_v2or3(journal)) tag_space -= sizeof(struct jbd2_journal_block_tail); /* Commit code leaves a slack space of 16 bytes at the end of block */ tags_per_block = (tag_space - 16) / journal_tag_bytes(journal); /* * Revoke descriptors are accounted separately so we need to reserve * space for commit block and normal transaction descriptor blocks. */ return 1 + DIV_ROUND_UP(journal->j_max_transaction_buffers, tags_per_block); } /* * jbd2_get_transaction: obtain a new transaction_t object. * * Simply initialise a new transaction. Initialize it in * RUNNING state and add it to the current journal (which should not * have an existing running transaction: we only make a new transaction * once we have started to commit the old one). * * Preconditions: * The journal MUST be locked. We don't perform atomic mallocs on the * new transaction and we can't block without protecting against other * processes trying to touch the journal while it is in transition. * */ static void jbd2_get_transaction(journal_t *journal, transaction_t *transaction) { transaction->t_journal = journal; transaction->t_state = T_RUNNING; transaction->t_start_time = ktime_get(); transaction->t_tid = journal->j_transaction_sequence++; transaction->t_expires = jiffies + journal->j_commit_interval; atomic_set(&transaction->t_updates, 0); atomic_set(&transaction->t_outstanding_credits, jbd2_descriptor_blocks_per_trans(journal) + atomic_read(&journal->j_reserved_credits)); atomic_set(&transaction->t_outstanding_revokes, 0); atomic_set(&transaction->t_handle_count, 0); INIT_LIST_HEAD(&transaction->t_inode_list); INIT_LIST_HEAD(&transaction->t_private_list); /* Set up the commit timer for the new transaction. */ journal->j_commit_timer.expires = round_jiffies_up(transaction->t_expires); add_timer(&journal->j_commit_timer); J_ASSERT(journal->j_running_transaction == NULL); journal->j_running_transaction = transaction; transaction->t_max_wait = 0; transaction->t_start = jiffies; transaction->t_requested = 0; } /* * Handle management. * * A handle_t is an object which represents a single atomic update to a * filesystem, and which tracks all of the modifications which form part * of that one update. */ /* * Update transaction's maximum wait time, if debugging is enabled. * * t_max_wait is carefully updated here with use of atomic compare exchange. * Note that there could be multiplre threads trying to do this simultaneously * hence using cmpxchg to avoid any use of locks in this case. * With this t_max_wait can be updated w/o enabling jbd2_journal_enable_debug. */ static inline void update_t_max_wait(transaction_t *transaction, unsigned long ts) { unsigned long oldts, newts; if (time_after(transaction->t_start, ts)) { newts = jbd2_time_diff(ts, transaction->t_start); oldts = READ_ONCE(transaction->t_max_wait); while (oldts < newts) oldts = cmpxchg(&transaction->t_max_wait, oldts, newts); } } /* * Wait until running transaction passes to T_FLUSH state and new transaction * can thus be started. Also starts the commit if needed. The function expects * running transaction to exist and releases j_state_lock. */ static void wait_transaction_locked(journal_t *journal) __releases(journal->j_state_lock) { DEFINE_WAIT(wait); int need_to_start; tid_t tid = journal->j_running_transaction->t_tid; prepare_to_wait_exclusive(&journal->j_wait_transaction_locked, &wait, TASK_UNINTERRUPTIBLE); need_to_start = !tid_geq(journal->j_commit_request, tid); read_unlock(&journal->j_state_lock); if (need_to_start) jbd2_log_start_commit(journal, tid); jbd2_might_wait_for_commit(journal); schedule(); finish_wait(&journal->j_wait_transaction_locked, &wait); } /* * Wait until running transaction transitions from T_SWITCH to T_FLUSH * state and new transaction can thus be started. The function releases * j_state_lock. */ static void wait_transaction_switching(journal_t *journal) __releases(journal->j_state_lock) { DEFINE_WAIT(wait); if (WARN_ON(!journal->j_running_transaction || journal->j_running_transaction->t_state != T_SWITCH)) { read_unlock(&journal->j_state_lock); return; } prepare_to_wait_exclusive(&journal->j_wait_transaction_locked, &wait, TASK_UNINTERRUPTIBLE); read_unlock(&journal->j_state_lock); /* * We don't call jbd2_might_wait_for_commit() here as there's no * waiting for outstanding handles happening anymore in T_SWITCH state * and handling of reserved handles actually relies on that for * correctness. */ schedule(); finish_wait(&journal->j_wait_transaction_locked, &wait); } static void sub_reserved_credits(journal_t *journal, int blocks) { atomic_sub(blocks, &journal->j_reserved_credits); wake_up(&journal->j_wait_reserved); } /* * Wait until we can add credits for handle to the running transaction. Called * with j_state_lock held for reading. Returns 0 if handle joined the running * transaction. Returns 1 if we had to wait, j_state_lock is dropped, and * caller must retry. * * Note: because j_state_lock may be dropped depending on the return * value, we need to fake out sparse so ti doesn't complain about a * locking imbalance. Callers of add_transaction_credits will need to * make a similar accomodation. */ static int add_transaction_credits(journal_t *journal, int blocks, int rsv_blocks) __must_hold(&journal->j_state_lock) { transaction_t *t = journal->j_running_transaction; int needed; int total = blocks + rsv_blocks; /* * If the current transaction is locked down for commit, wait * for the lock to be released. */ if (t->t_state != T_RUNNING) { WARN_ON_ONCE(t->t_state >= T_FLUSH); wait_transaction_locked(journal); __acquire(&journal->j_state_lock); /* fake out sparse */ return 1; } /* * If there is not enough space left in the log to write all * potential buffers requested by this operation, we need to * stall pending a log checkpoint to free some more log space. */ needed = atomic_add_return(total, &t->t_outstanding_credits); if (needed > journal->j_max_transaction_buffers) { /* * If the current transaction is already too large, * then start to commit it: we can then go back and * attach this handle to a new transaction. */ atomic_sub(total, &t->t_outstanding_credits); /* * Is the number of reserved credits in the current transaction too * big to fit this handle? Wait until reserved credits are freed. */ if (atomic_read(&journal->j_reserved_credits) + total > journal->j_max_transaction_buffers) { read_unlock(&journal->j_state_lock); jbd2_might_wait_for_commit(journal); wait_event(journal->j_wait_reserved, atomic_read(&journal->j_reserved_credits) + total <= journal->j_max_transaction_buffers); __acquire(&journal->j_state_lock); /* fake out sparse */ return 1; } wait_transaction_locked(journal); __acquire(&journal->j_state_lock); /* fake out sparse */ return 1; } /* * The commit code assumes that it can get enough log space * without forcing a checkpoint. This is *critical* for * correctness: a checkpoint of a buffer which is also * associated with a committing transaction creates a deadlock, * so commit simply cannot force through checkpoints. * * We must therefore ensure the necessary space in the journal * *before* starting to dirty potentially checkpointed buffers * in the new transaction. */ if (jbd2_log_space_left(journal) < journal->j_max_transaction_buffers) { atomic_sub(total, &t->t_outstanding_credits); read_unlock(&journal->j_state_lock); jbd2_might_wait_for_commit(journal); write_lock(&journal->j_state_lock); if (jbd2_log_space_left(journal) < journal->j_max_transaction_buffers) __jbd2_log_wait_for_space(journal); write_unlock(&journal->j_state_lock); __acquire(&journal->j_state_lock); /* fake out sparse */ return 1; } /* No reservation? We are done... */ if (!rsv_blocks) return 0; needed = atomic_add_return(rsv_blocks, &journal->j_reserved_credits); /* We allow at most half of a transaction to be reserved */ if (needed > journal->j_max_transaction_buffers / 2) { sub_reserved_credits(journal, rsv_blocks); atomic_sub(total, &t->t_outstanding_credits); read_unlock(&journal->j_state_lock); jbd2_might_wait_for_commit(journal); wait_event(journal->j_wait_reserved, atomic_read(&journal->j_reserved_credits) + rsv_blocks <= journal->j_max_transaction_buffers / 2); __acquire(&journal->j_state_lock); /* fake out sparse */ return 1; } return 0; } /* * start_this_handle: Given a handle, deal with any locking or stalling * needed to make sure that there is enough journal space for the handle * to begin. Attach the handle to a transaction and set up the * transaction's buffer credits. */ static int start_this_handle(journal_t *journal, handle_t *handle, gfp_t gfp_mask) { transaction_t *transaction, *new_transaction = NULL; int blocks = handle->h_total_credits; int rsv_blocks = 0; unsigned long ts = jiffies; if (handle->h_rsv_handle) rsv_blocks = handle->h_rsv_handle->h_total_credits; /* * Limit the number of reserved credits to 1/2 of maximum transaction * size and limit the number of total credits to not exceed maximum * transaction size per operation. */ if ((rsv_blocks > journal->j_max_transaction_buffers / 2) || (rsv_blocks + blocks > journal->j_max_transaction_buffers)) { printk(KERN_ERR "JBD2: %s wants too many credits " "credits:%d rsv_credits:%d max:%d\n", current->comm, blocks, rsv_blocks, journal->j_max_transaction_buffers); WARN_ON(1); return -ENOSPC; } alloc_transaction: /* * This check is racy but it is just an optimization of allocating new * transaction early if there are high chances we'll need it. If we * guess wrong, we'll retry or free unused transaction. */ if (!data_race(journal->j_running_transaction)) { /* * If __GFP_FS is not present, then we may be being called from * inside the fs writeback layer, so we MUST NOT fail. */ if ((gfp_mask & __GFP_FS) == 0) gfp_mask |= __GFP_NOFAIL; new_transaction = kmem_cache_zalloc(transaction_cache, gfp_mask); if (!new_transaction) return -ENOMEM; } jbd2_debug(3, "New handle %p going live.\n", handle); /* * We need to hold j_state_lock until t_updates has been incremented, * for proper journal barrier handling */ repeat: read_lock(&journal->j_state_lock); BUG_ON(journal->j_flags & JBD2_UNMOUNT); if (is_journal_aborted(journal) || (journal->j_errno != 0 && !(journal->j_flags & JBD2_ACK_ERR))) { read_unlock(&journal->j_state_lock); jbd2_journal_free_transaction(new_transaction); return -EROFS; } /* * Wait on the journal's transaction barrier if necessary. Specifically * we allow reserved handles to proceed because otherwise commit could * deadlock on page writeback not being able to complete. */ if (!handle->h_reserved && journal->j_barrier_count) { read_unlock(&journal->j_state_lock); wait_event(journal->j_wait_transaction_locked, journal->j_barrier_count == 0); goto repeat; } if (!journal->j_running_transaction) { read_unlock(&journal->j_state_lock); if (!new_transaction) goto alloc_transaction; write_lock(&journal->j_state_lock); if (!journal->j_running_transaction && (handle->h_reserved || !journal->j_barrier_count)) { jbd2_get_transaction(journal, new_transaction); new_transaction = NULL; } write_unlock(&journal->j_state_lock); goto repeat; } transaction = journal->j_running_transaction; if (!handle->h_reserved) { /* We may have dropped j_state_lock - restart in that case */ if (add_transaction_credits(journal, blocks, rsv_blocks)) { /* * add_transaction_credits releases * j_state_lock on a non-zero return */ __release(&journal->j_state_lock); goto repeat; } } else { /* * We have handle reserved so we are allowed to join T_LOCKED * transaction and we don't have to check for transaction size * and journal space. But we still have to wait while running * transaction is being switched to a committing one as it * won't wait for any handles anymore. */ if (transaction->t_state == T_SWITCH) { wait_transaction_switching(journal); goto repeat; } sub_reserved_credits(journal, blocks); handle->h_reserved = 0; } /* OK, account for the buffers that this operation expects to * use and add the handle to the running transaction. */ update_t_max_wait(transaction, ts); handle->h_transaction = transaction; handle->h_requested_credits = blocks; handle->h_revoke_credits_requested = handle->h_revoke_credits; handle->h_start_jiffies = jiffies; atomic_inc(&transaction->t_updates); atomic_inc(&transaction->t_handle_count); jbd2_debug(4, "Handle %p given %d credits (total %d, free %lu)\n", handle, blocks, atomic_read(&transaction->t_outstanding_credits), jbd2_log_space_left(journal)); read_unlock(&journal->j_state_lock); current->journal_info = handle; rwsem_acquire_read(&journal->j_trans_commit_map, 0, 0, _THIS_IP_); jbd2_journal_free_transaction(new_transaction); /* * Ensure that no allocations done while the transaction is open are * going to recurse back to the fs layer. */ handle->saved_alloc_context = memalloc_nofs_save(); return 0; } /* Allocate a new handle. This should probably be in a slab... */ static handle_t *new_handle(int nblocks) { handle_t *handle = jbd2_alloc_handle(GFP_NOFS); if (!handle) return NULL; handle->h_total_credits = nblocks; handle->h_ref = 1; return handle; } handle_t *jbd2__journal_start(journal_t *journal, int nblocks, int rsv_blocks, int revoke_records, gfp_t gfp_mask, unsigned int type, unsigned int line_no) { handle_t *handle = journal_current_handle(); int err; if (!journal) return ERR_PTR(-EROFS); if (handle) { J_ASSERT(handle->h_transaction->t_journal == journal); handle->h_ref++; return handle; } nblocks += DIV_ROUND_UP(revoke_records, journal->j_revoke_records_per_block); handle = new_handle(nblocks); if (!handle) return ERR_PTR(-ENOMEM); if (rsv_blocks) { handle_t *rsv_handle; rsv_handle = new_handle(rsv_blocks); if (!rsv_handle) { jbd2_free_handle(handle); return ERR_PTR(-ENOMEM); } rsv_handle->h_reserved = 1; rsv_handle->h_journal = journal; handle->h_rsv_handle = rsv_handle; } handle->h_revoke_credits = revoke_records; err = start_this_handle(journal, handle, gfp_mask); if (err < 0) { if (handle->h_rsv_handle) jbd2_free_handle(handle->h_rsv_handle); jbd2_free_handle(handle); return ERR_PTR(err); } handle->h_type = type; handle->h_line_no = line_no; trace_jbd2_handle_start(journal->j_fs_dev->bd_dev, handle->h_transaction->t_tid, type, line_no, nblocks); return handle; } EXPORT_SYMBOL(jbd2__journal_start); /** * jbd2_journal_start() - Obtain a new handle. * @journal: Journal to start transaction on. * @nblocks: number of block buffer we might modify * * We make sure that the transaction can guarantee at least nblocks of * modified buffers in the log. We block until the log can guarantee * that much space. Additionally, if rsv_blocks > 0, we also create another * handle with rsv_blocks reserved blocks in the journal. This handle is * stored in h_rsv_handle. It is not attached to any particular transaction * and thus doesn't block transaction commit. If the caller uses this reserved * handle, it has to set h_rsv_handle to NULL as otherwise jbd2_journal_stop() * on the parent handle will dispose the reserved one. Reserved handle has to * be converted to a normal handle using jbd2_journal_start_reserved() before * it can be used. * * Return a pointer to a newly allocated handle, or an ERR_PTR() value * on failure. */ handle_t *jbd2_journal_start(journal_t *journal, int nblocks) { return jbd2__journal_start(journal, nblocks, 0, 0, GFP_NOFS, 0, 0); } EXPORT_SYMBOL(jbd2_journal_start); static void __jbd2_journal_unreserve_handle(handle_t *handle, transaction_t *t) { journal_t *journal = handle->h_journal; WARN_ON(!handle->h_reserved); sub_reserved_credits(journal, handle->h_total_credits); if (t) atomic_sub(handle->h_total_credits, &t->t_outstanding_credits); } void jbd2_journal_free_reserved(handle_t *handle) { journal_t *journal = handle->h_journal; /* Get j_state_lock to pin running transaction if it exists */ read_lock(&journal->j_state_lock); __jbd2_journal_unreserve_handle(handle, journal->j_running_transaction); read_unlock(&journal->j_state_lock); jbd2_free_handle(handle); } EXPORT_SYMBOL(jbd2_journal_free_reserved); /** * jbd2_journal_start_reserved() - start reserved handle * @handle: handle to start * @type: for handle statistics * @line_no: for handle statistics * * Start handle that has been previously reserved with jbd2_journal_reserve(). * This attaches @handle to the running transaction (or creates one if there's * not transaction running). Unlike jbd2_journal_start() this function cannot * block on journal commit, checkpointing, or similar stuff. It can block on * memory allocation or frozen journal though. * * Return 0 on success, non-zero on error - handle is freed in that case. */ int jbd2_journal_start_reserved(handle_t *handle, unsigned int type, unsigned int line_no) { journal_t *journal = handle->h_journal; int ret = -EIO; if (WARN_ON(!handle->h_reserved)) { /* Someone passed in normal handle? Just stop it. */ jbd2_journal_stop(handle); return ret; } /* * Usefulness of mixing of reserved and unreserved handles is * questionable. So far nobody seems to need it so just error out. */ if (WARN_ON(current->journal_info)) { jbd2_journal_free_reserved(handle); return ret; } handle->h_journal = NULL; /* * GFP_NOFS is here because callers are likely from writeback or * similarly constrained call sites */ ret = start_this_handle(journal, handle, GFP_NOFS); if (ret < 0) { handle->h_journal = journal; jbd2_journal_free_reserved(handle); return ret; } handle->h_type = type; handle->h_line_no = line_no; trace_jbd2_handle_start(journal->j_fs_dev->bd_dev, handle->h_transaction->t_tid, type, line_no, handle->h_total_credits); return 0; } EXPORT_SYMBOL(jbd2_journal_start_reserved); /** * jbd2_journal_extend() - extend buffer credits. * @handle: handle to 'extend' * @nblocks: nr blocks to try to extend by. * @revoke_records: number of revoke records to try to extend by. * * Some transactions, such as large extends and truncates, can be done * atomically all at once or in several stages. The operation requests * a credit for a number of buffer modifications in advance, but can * extend its credit if it needs more. * * jbd2_journal_extend tries to give the running handle more buffer credits. * It does not guarantee that allocation - this is a best-effort only. * The calling process MUST be able to deal cleanly with a failure to * extend here. * * Return 0 on success, non-zero on failure. * * return code < 0 implies an error * return code > 0 implies normal transaction-full status. */ int jbd2_journal_extend(handle_t *handle, int nblocks, int revoke_records) { transaction_t *transaction = handle->h_transaction; journal_t *journal; int result; int wanted; if (is_handle_aborted(handle)) return -EROFS; journal = transaction->t_journal; result = 1; read_lock(&journal->j_state_lock); /* Don't extend a locked-down transaction! */ if (transaction->t_state != T_RUNNING) { jbd2_debug(3, "denied handle %p %d blocks: " "transaction not running\n", handle, nblocks); goto error_out; } nblocks += DIV_ROUND_UP( handle->h_revoke_credits_requested + revoke_records, journal->j_revoke_records_per_block) - DIV_ROUND_UP( handle->h_revoke_credits_requested, journal->j_revoke_records_per_block); wanted = atomic_add_return(nblocks, &transaction->t_outstanding_credits); if (wanted > journal->j_max_transaction_buffers) { jbd2_debug(3, "denied handle %p %d blocks: " "transaction too large\n", handle, nblocks); atomic_sub(nblocks, &transaction->t_outstanding_credits); goto error_out; } trace_jbd2_handle_extend(journal->j_fs_dev->bd_dev, transaction->t_tid, handle->h_type, handle->h_line_no, handle->h_total_credits, nblocks); handle->h_total_credits += nblocks; handle->h_requested_credits += nblocks; handle->h_revoke_credits += revoke_records; handle->h_revoke_credits_requested += revoke_records; result = 0; jbd2_debug(3, "extended handle %p by %d\n", handle, nblocks); error_out: read_unlock(&journal->j_state_lock); return result; } static void stop_this_handle(handle_t *handle) { transaction_t *transaction = handle->h_transaction; journal_t *journal = transaction->t_journal; int revokes; J_ASSERT(journal_current_handle() == handle); J_ASSERT(atomic_read(&transaction->t_updates) > 0); current->journal_info = NULL; /* * Subtract necessary revoke descriptor blocks from handle credits. We * take care to account only for revoke descriptor blocks the * transaction will really need as large sequences of transactions with * small numbers of revokes are relatively common. */ revokes = handle->h_revoke_credits_requested - handle->h_revoke_credits; if (revokes) { int t_revokes, revoke_descriptors; int rr_per_blk = journal->j_revoke_records_per_block; WARN_ON_ONCE(DIV_ROUND_UP(revokes, rr_per_blk) > handle->h_total_credits); t_revokes = atomic_add_return(revokes, &transaction->t_outstanding_revokes); revoke_descriptors = DIV_ROUND_UP(t_revokes, rr_per_blk) - DIV_ROUND_UP(t_revokes - revokes, rr_per_blk); handle->h_total_credits -= revoke_descriptors; } atomic_sub(handle->h_total_credits, &transaction->t_outstanding_credits); if (handle->h_rsv_handle) __jbd2_journal_unreserve_handle(handle->h_rsv_handle, transaction); if (atomic_dec_and_test(&transaction->t_updates)) wake_up(&journal->j_wait_updates); rwsem_release(&journal->j_trans_commit_map, _THIS_IP_); /* * Scope of the GFP_NOFS context is over here and so we can restore the * original alloc context. */ memalloc_nofs_restore(handle->saved_alloc_context); } /** * jbd2__journal_restart() - restart a handle . * @handle: handle to restart * @nblocks: nr credits requested * @revoke_records: number of revoke record credits requested * @gfp_mask: memory allocation flags (for start_this_handle) * * Restart a handle for a multi-transaction filesystem * operation. * * If the jbd2_journal_extend() call above fails to grant new buffer credits * to a running handle, a call to jbd2_journal_restart will commit the * handle's transaction so far and reattach the handle to a new * transaction capable of guaranteeing the requested number of * credits. We preserve reserved handle if there's any attached to the * passed in handle. */ int jbd2__journal_restart(handle_t *handle, int nblocks, int revoke_records, gfp_t gfp_mask) { transaction_t *transaction = handle->h_transaction; journal_t *journal; tid_t tid; int need_to_start; int ret; /* If we've had an abort of any type, don't even think about * actually doing the restart! */ if (is_handle_aborted(handle)) return 0; journal = transaction->t_journal; tid = transaction->t_tid; /* * First unlink the handle from its current transaction, and start the * commit on that. */ jbd2_debug(2, "restarting handle %p\n", handle); stop_this_handle(handle); handle->h_transaction = NULL; /* * TODO: If we use READ_ONCE / WRITE_ONCE for j_commit_request we can * get rid of pointless j_state_lock traffic like this. */ read_lock(&journal->j_state_lock); need_to_start = !tid_geq(journal->j_commit_request, tid); read_unlock(&journal->j_state_lock); if (need_to_start) jbd2_log_start_commit(journal, tid); handle->h_total_credits = nblocks + DIV_ROUND_UP(revoke_records, journal->j_revoke_records_per_block); handle->h_revoke_credits = revoke_records; ret = start_this_handle(journal, handle, gfp_mask); trace_jbd2_handle_restart(journal->j_fs_dev->bd_dev, ret ? 0 : handle->h_transaction->t_tid, handle->h_type, handle->h_line_no, handle->h_total_credits); return ret; } EXPORT_SYMBOL(jbd2__journal_restart); int jbd2_journal_restart(handle_t *handle, int nblocks) { return jbd2__journal_restart(handle, nblocks, 0, GFP_NOFS); } EXPORT_SYMBOL(jbd2_journal_restart); /* * Waits for any outstanding t_updates to finish. * This is called with write j_state_lock held. */ void jbd2_journal_wait_updates(journal_t *journal) { DEFINE_WAIT(wait); while (1) { /* * Note that the running transaction can get freed under us if * this transaction is getting committed in * jbd2_journal_commit_transaction() -> * jbd2_journal_free_transaction(). This can only happen when we * release j_state_lock -> schedule() -> acquire j_state_lock. * Hence we should everytime retrieve new j_running_transaction * value (after j_state_lock release acquire cycle), else it may * lead to use-after-free of old freed transaction. */ transaction_t *transaction = journal->j_running_transaction; if (!transaction) break; prepare_to_wait(&journal->j_wait_updates, &wait, TASK_UNINTERRUPTIBLE); if (!atomic_read(&transaction->t_updates)) { finish_wait(&journal->j_wait_updates, &wait); break; } write_unlock(&journal->j_state_lock); schedule(); finish_wait(&journal->j_wait_updates, &wait); write_lock(&journal->j_state_lock); } } /** * jbd2_journal_lock_updates () - establish a transaction barrier. * @journal: Journal to establish a barrier on. * * This locks out any further updates from being started, and blocks * until all existing updates have completed, returning only once the * journal is in a quiescent state with no updates running. * * The journal lock should not be held on entry. */ void jbd2_journal_lock_updates(journal_t *journal) { jbd2_might_wait_for_commit(journal); write_lock(&journal->j_state_lock); ++journal->j_barrier_count; /* Wait until there are no reserved handles */ if (atomic_read(&journal->j_reserved_credits)) { write_unlock(&journal->j_state_lock); wait_event(journal->j_wait_reserved, atomic_read(&journal->j_reserved_credits) == 0); write_lock(&journal->j_state_lock); } /* Wait until there are no running t_updates */ jbd2_journal_wait_updates(journal); write_unlock(&journal->j_state_lock); /* * We have now established a barrier against other normal updates, but * we also need to barrier against other jbd2_journal_lock_updates() calls * to make sure that we serialise special journal-locked operations * too. */ mutex_lock(&journal->j_barrier); } /** * jbd2_journal_unlock_updates () - release barrier * @journal: Journal to release the barrier on. * * Release a transaction barrier obtained with jbd2_journal_lock_updates(). * * Should be called without the journal lock held. */ void jbd2_journal_unlock_updates (journal_t *journal) { J_ASSERT(journal->j_barrier_count != 0); mutex_unlock(&journal->j_barrier); write_lock(&journal->j_state_lock); --journal->j_barrier_count; write_unlock(&journal->j_state_lock); wake_up_all(&journal->j_wait_transaction_locked); } static void warn_dirty_buffer(struct buffer_head *bh) { printk(KERN_WARNING "JBD2: Spotted dirty metadata buffer (dev = %pg, blocknr = %llu). " "There's a risk of filesystem corruption in case of system " "crash.\n", bh->b_bdev, (unsigned long long)bh->b_blocknr); } /* Call t_frozen trigger and copy buffer data into jh->b_frozen_data. */ static void jbd2_freeze_jh_data(struct journal_head *jh) { char *source; struct buffer_head *bh = jh2bh(jh); J_EXPECT_JH(jh, buffer_uptodate(bh), "Possible IO failure.\n"); source = kmap_local_folio(bh->b_folio, bh_offset(bh)); /* Fire data frozen trigger just before we copy the data */ jbd2_buffer_frozen_trigger(jh, source, jh->b_triggers); memcpy(jh->b_frozen_data, source, bh->b_size); kunmap_local(source); /* * Now that the frozen data is saved off, we need to store any matching * triggers. */ jh->b_frozen_triggers = jh->b_triggers; } /* * If the buffer is already part of the current transaction, then there * is nothing we need to do. If it is already part of a prior * transaction which we are still committing to disk, then we need to * make sure that we do not overwrite the old copy: we do copy-out to * preserve the copy going to disk. We also account the buffer against * the handle's metadata buffer credits (unless the buffer is already * part of the transaction, that is). * */ static int do_get_write_access(handle_t *handle, struct journal_head *jh, int force_copy) { struct buffer_head *bh; transaction_t *transaction = handle->h_transaction; journal_t *journal; int error; char *frozen_buffer = NULL; unsigned long start_lock, time_lock; journal = transaction->t_journal; jbd2_debug(5, "journal_head %p, force_copy %d\n", jh, force_copy); JBUFFER_TRACE(jh, "entry"); repeat: bh = jh2bh(jh); /* @@@ Need to check for errors here at some point. */ start_lock = jiffies; lock_buffer(bh); spin_lock(&jh->b_state_lock); /* If it takes too long to lock the buffer, trace it */ time_lock = jbd2_time_diff(start_lock, jiffies); if (time_lock > HZ/10) trace_jbd2_lock_buffer_stall(bh->b_bdev->bd_dev, jiffies_to_msecs(time_lock)); /* We now hold the buffer lock so it is safe to query the buffer * state. Is the buffer dirty? * * If so, there are two possibilities. The buffer may be * non-journaled, and undergoing a quite legitimate writeback. * Otherwise, it is journaled, and we don't expect dirty buffers * in that state (the buffers should be marked JBD_Dirty * instead.) So either the IO is being done under our own * control and this is a bug, or it's a third party IO such as * dump(8) (which may leave the buffer scheduled for read --- * ie. locked but not dirty) or tune2fs (which may actually have * the buffer dirtied, ugh.) */ if (buffer_dirty(bh) && jh->b_transaction) { warn_dirty_buffer(bh); /* * We need to clean the dirty flag and we must do it under the * buffer lock to be sure we don't race with running write-out. */ JBUFFER_TRACE(jh, "Journalling dirty buffer"); clear_buffer_dirty(bh); /* * The buffer is going to be added to BJ_Reserved list now and * nothing guarantees jbd2_journal_dirty_metadata() will be * ever called for it. So we need to set jbddirty bit here to * make sure the buffer is dirtied and written out when the * journaling machinery is done with it. */ set_buffer_jbddirty(bh); } error = -EROFS; if (is_handle_aborted(handle)) { spin_unlock(&jh->b_state_lock); unlock_buffer(bh); goto out; } error = 0; /* * The buffer is already part of this transaction if b_transaction or * b_next_transaction points to it */ if (jh->b_transaction == transaction || jh->b_next_transaction == transaction) { unlock_buffer(bh); goto done; } /* * this is the first time this transaction is touching this buffer, * reset the modified flag */ jh->b_modified = 0; /* * If the buffer is not journaled right now, we need to make sure it * doesn't get written to disk before the caller actually commits the * new data */ if (!jh->b_transaction) { JBUFFER_TRACE(jh, "no transaction"); J_ASSERT_JH(jh, !jh->b_next_transaction); JBUFFER_TRACE(jh, "file as BJ_Reserved"); /* * Make sure all stores to jh (b_modified, b_frozen_data) are * visible before attaching it to the running transaction. * Paired with barrier in jbd2_write_access_granted() */ smp_wmb(); spin_lock(&journal->j_list_lock); if (test_clear_buffer_dirty(bh)) { /* * Execute buffer dirty clearing and jh->b_transaction * assignment under journal->j_list_lock locked to * prevent bh being removed from checkpoint list if * the buffer is in an intermediate state (not dirty * and jh->b_transaction is NULL). */ JBUFFER_TRACE(jh, "Journalling dirty buffer"); set_buffer_jbddirty(bh); } __jbd2_journal_file_buffer(jh, transaction, BJ_Reserved); spin_unlock(&journal->j_list_lock); unlock_buffer(bh); goto done; } unlock_buffer(bh); /* * If there is already a copy-out version of this buffer, then we don't * need to make another one */ if (jh->b_frozen_data) { JBUFFER_TRACE(jh, "has frozen data"); J_ASSERT_JH(jh, jh->b_next_transaction == NULL); goto attach_next; } JBUFFER_TRACE(jh, "owned by older transaction"); J_ASSERT_JH(jh, jh->b_next_transaction == NULL); J_ASSERT_JH(jh, jh->b_transaction == journal->j_committing_transaction); /* * There is one case we have to be very careful about. If the * committing transaction is currently writing this buffer out to disk * and has NOT made a copy-out, then we cannot modify the buffer * contents at all right now. The essence of copy-out is that it is * the extra copy, not the primary copy, which gets journaled. If the * primary copy is already going to disk then we cannot do copy-out * here. */ if (buffer_shadow(bh)) { JBUFFER_TRACE(jh, "on shadow: sleep"); spin_unlock(&jh->b_state_lock); wait_on_bit_io(&bh->b_state, BH_Shadow, TASK_UNINTERRUPTIBLE); goto repeat; } /* * Only do the copy if the currently-owning transaction still needs it. * If buffer isn't on BJ_Metadata list, the committing transaction is * past that stage (here we use the fact that BH_Shadow is set under * bh_state lock together with refiling to BJ_Shadow list and at this * point we know the buffer doesn't have BH_Shadow set). * * Subtle point, though: if this is a get_undo_access, then we will be * relying on the frozen_data to contain the new value of the * committed_data record after the transaction, so we HAVE to force the * frozen_data copy in that case. */ if (jh->b_jlist == BJ_Metadata || force_copy) { JBUFFER_TRACE(jh, "generate frozen data"); if (!frozen_buffer) { JBUFFER_TRACE(jh, "allocate memory for buffer"); spin_unlock(&jh->b_state_lock); frozen_buffer = jbd2_alloc(jh2bh(jh)->b_size, GFP_NOFS | __GFP_NOFAIL); goto repeat; } jh->b_frozen_data = frozen_buffer; frozen_buffer = NULL; jbd2_freeze_jh_data(jh); } attach_next: /* * Make sure all stores to jh (b_modified, b_frozen_data) are visible * before attaching it to the running transaction. Paired with barrier * in jbd2_write_access_granted() */ smp_wmb(); jh->b_next_transaction = transaction; done: spin_unlock(&jh->b_state_lock); /* * If we are about to journal a buffer, then any revoke pending on it is * no longer valid */ jbd2_journal_cancel_revoke(handle, jh); out: if (unlikely(frozen_buffer)) /* It's usually NULL */ jbd2_free(frozen_buffer, bh->b_size); JBUFFER_TRACE(jh, "exit"); return error; } /* Fast check whether buffer is already attached to the required transaction */ static bool jbd2_write_access_granted(handle_t *handle, struct buffer_head *bh, bool undo) { struct journal_head *jh; bool ret = false; /* Dirty buffers require special handling... */ if (buffer_dirty(bh)) return false; /* * RCU protects us from dereferencing freed pages. So the checks we do * are guaranteed not to oops. However the jh slab object can get freed * & reallocated while we work with it. So we have to be careful. When * we see jh attached to the running transaction, we know it must stay * so until the transaction is committed. Thus jh won't be freed and * will be attached to the same bh while we run. However it can * happen jh gets freed, reallocated, and attached to the transaction * just after we get pointer to it from bh. So we have to be careful * and recheck jh still belongs to our bh before we return success. */ rcu_read_lock(); if (!buffer_jbd(bh)) goto out; /* This should be bh2jh() but that doesn't work with inline functions */ jh = READ_ONCE(bh->b_private); if (!jh) goto out; /* For undo access buffer must have data copied */ if (undo && !jh->b_committed_data) goto out; if (READ_ONCE(jh->b_transaction) != handle->h_transaction && READ_ONCE(jh->b_next_transaction) != handle->h_transaction) goto out; /* * There are two reasons for the barrier here: * 1) Make sure to fetch b_bh after we did previous checks so that we * detect when jh went through free, realloc, attach to transaction * while we were checking. Paired with implicit barrier in that path. * 2) So that access to bh done after jbd2_write_access_granted() * doesn't get reordered and see inconsistent state of concurrent * do_get_write_access(). */ smp_mb(); if (unlikely(jh->b_bh != bh)) goto out; ret = true; out: rcu_read_unlock(); return ret; } /** * jbd2_journal_get_write_access() - notify intent to modify a buffer * for metadata (not data) update. * @handle: transaction to add buffer modifications to * @bh: bh to be used for metadata writes * * Returns: error code or 0 on success. * * In full data journalling mode the buffer may be of type BJ_AsyncData, * because we're ``write()ing`` a buffer which is also part of a shared mapping. */ int jbd2_journal_get_write_access(handle_t *handle, struct buffer_head *bh) { struct journal_head *jh; journal_t *journal; int rc; if (is_handle_aborted(handle)) return -EROFS; journal = handle->h_transaction->t_journal; if (jbd2_check_fs_dev_write_error(journal)) { /* * If the fs dev has writeback errors, it may have failed * to async write out metadata buffers in the background. * In this case, we could read old data from disk and write * it out again, which may lead to on-disk filesystem * inconsistency. Aborting journal can avoid it happen. */ jbd2_journal_abort(journal, -EIO); return -EIO; } if (jbd2_write_access_granted(handle, bh, false)) return 0; jh = jbd2_journal_add_journal_head(bh); /* We do not want to get caught playing with fields which the * log thread also manipulates. Make sure that the buffer * completes any outstanding IO before proceeding. */ rc = do_get_write_access(handle, jh, 0); jbd2_journal_put_journal_head(jh); return rc; } /* * When the user wants to journal a newly created buffer_head * (ie. getblk() returned a new buffer and we are going to populate it * manually rather than reading off disk), then we need to keep the * buffer_head locked until it has been completely filled with new * data. In this case, we should be able to make the assertion that * the bh is not already part of an existing transaction. * * The buffer should already be locked by the caller by this point. * There is no lock ranking violation: it was a newly created, * unlocked buffer beforehand. */ /** * jbd2_journal_get_create_access () - notify intent to use newly created bh * @handle: transaction to new buffer to * @bh: new buffer. * * Call this if you create a new bh. */ int jbd2_journal_get_create_access(handle_t *handle, struct buffer_head *bh) { transaction_t *transaction = handle->h_transaction; journal_t *journal; struct journal_head *jh = jbd2_journal_add_journal_head(bh); int err; jbd2_debug(5, "journal_head %p\n", jh); err = -EROFS; if (is_handle_aborted(handle)) goto out; journal = transaction->t_journal; err = 0; JBUFFER_TRACE(jh, "entry"); /* * The buffer may already belong to this transaction due to pre-zeroing * in the filesystem's new_block code. It may also be on the previous, * committing transaction's lists, but it HAS to be in Forget state in * that case: the transaction must have deleted the buffer for it to be * reused here. */ spin_lock(&jh->b_state_lock); J_ASSERT_JH(jh, (jh->b_transaction == transaction || jh->b_transaction == NULL || (jh->b_transaction == journal->j_committing_transaction && jh->b_jlist == BJ_Forget))); J_ASSERT_JH(jh, jh->b_next_transaction == NULL); J_ASSERT_JH(jh, buffer_locked(jh2bh(jh))); if (jh->b_transaction == NULL) { /* * Previous jbd2_journal_forget() could have left the buffer * with jbddirty bit set because it was being committed. When * the commit finished, we've filed the buffer for * checkpointing and marked it dirty. Now we are reallocating * the buffer so the transaction freeing it must have * committed and so it's safe to clear the dirty bit. */ clear_buffer_dirty(jh2bh(jh)); /* first access by this transaction */ jh->b_modified = 0; JBUFFER_TRACE(jh, "file as BJ_Reserved"); spin_lock(&journal->j_list_lock); __jbd2_journal_file_buffer(jh, transaction, BJ_Reserved); spin_unlock(&journal->j_list_lock); } else if (jh->b_transaction == journal->j_committing_transaction) { /* first access by this transaction */ jh->b_modified = 0; JBUFFER_TRACE(jh, "set next transaction"); spin_lock(&journal->j_list_lock); jh->b_next_transaction = transaction; spin_unlock(&journal->j_list_lock); } spin_unlock(&jh->b_state_lock); /* * akpm: I added this. ext3_alloc_branch can pick up new indirect * blocks which contain freed but then revoked metadata. We need * to cancel the revoke in case we end up freeing it yet again * and the reallocating as data - this would cause a second revoke, * which hits an assertion error. */ JBUFFER_TRACE(jh, "cancelling revoke"); jbd2_journal_cancel_revoke(handle, jh); out: jbd2_journal_put_journal_head(jh); return err; } /** * jbd2_journal_get_undo_access() - Notify intent to modify metadata with * non-rewindable consequences * @handle: transaction * @bh: buffer to undo * * Sometimes there is a need to distinguish between metadata which has * been committed to disk and that which has not. The ext3fs code uses * this for freeing and allocating space, we have to make sure that we * do not reuse freed space until the deallocation has been committed, * since if we overwrote that space we would make the delete * un-rewindable in case of a crash. * * To deal with that, jbd2_journal_get_undo_access requests write access to a * buffer for parts of non-rewindable operations such as delete * operations on the bitmaps. The journaling code must keep a copy of * the buffer's contents prior to the undo_access call until such time * as we know that the buffer has definitely been committed to disk. * * We never need to know which transaction the committed data is part * of, buffers touched here are guaranteed to be dirtied later and so * will be committed to a new transaction in due course, at which point * we can discard the old committed data pointer. * * Returns error number or 0 on success. */ int jbd2_journal_get_undo_access(handle_t *handle, struct buffer_head *bh) { int err; struct journal_head *jh; char *committed_data = NULL; if (is_handle_aborted(handle)) return -EROFS; if (jbd2_write_access_granted(handle, bh, true)) return 0; jh = jbd2_journal_add_journal_head(bh); JBUFFER_TRACE(jh, "entry"); /* * Do this first --- it can drop the journal lock, so we want to * make sure that obtaining the committed_data is done * atomically wrt. completion of any outstanding commits. */ err = do_get_write_access(handle, jh, 1); if (err) goto out; repeat: if (!jh->b_committed_data) committed_data = jbd2_alloc(jh2bh(jh)->b_size, GFP_NOFS|__GFP_NOFAIL); spin_lock(&jh->b_state_lock); if (!jh->b_committed_data) { /* Copy out the current buffer contents into the * preserved, committed copy. */ JBUFFER_TRACE(jh, "generate b_committed data"); if (!committed_data) { spin_unlock(&jh->b_state_lock); goto repeat; } jh->b_committed_data = committed_data; committed_data = NULL; memcpy(jh->b_committed_data, bh->b_data, bh->b_size); } spin_unlock(&jh->b_state_lock); out: jbd2_journal_put_journal_head(jh); if (unlikely(committed_data)) jbd2_free(committed_data, bh->b_size); return err; } /** * jbd2_journal_set_triggers() - Add triggers for commit writeout * @bh: buffer to trigger on * @type: struct jbd2_buffer_trigger_type containing the trigger(s). * * Set any triggers on this journal_head. This is always safe, because * triggers for a committing buffer will be saved off, and triggers for * a running transaction will match the buffer in that transaction. * * Call with NULL to clear the triggers. */ void jbd2_journal_set_triggers(struct buffer_head *bh, struct jbd2_buffer_trigger_type *type) { struct journal_head *jh = jbd2_journal_grab_journal_head(bh); if (WARN_ON_ONCE(!jh)) return; jh->b_triggers = type; jbd2_journal_put_journal_head(jh); } void jbd2_buffer_frozen_trigger(struct journal_head *jh, void *mapped_data, struct jbd2_buffer_trigger_type *triggers) { struct buffer_head *bh = jh2bh(jh); if (!triggers || !triggers->t_frozen) return; triggers->t_frozen(triggers, bh, mapped_data, bh->b_size); } void jbd2_buffer_abort_trigger(struct journal_head *jh, struct jbd2_buffer_trigger_type *triggers) { if (!triggers || !triggers->t_abort) return; triggers->t_abort(triggers, jh2bh(jh)); } /** * jbd2_journal_dirty_metadata() - mark a buffer as containing dirty metadata * @handle: transaction to add buffer to. * @bh: buffer to mark * * mark dirty metadata which needs to be journaled as part of the current * transaction. * * The buffer must have previously had jbd2_journal_get_write_access() * called so that it has a valid journal_head attached to the buffer * head. * * The buffer is placed on the transaction's metadata list and is marked * as belonging to the transaction. * * Returns error number or 0 on success. * * Special care needs to be taken if the buffer already belongs to the * current committing transaction (in which case we should have frozen * data present for that commit). In that case, we don't relink the * buffer: that only gets done when the old transaction finally * completes its commit. */ int jbd2_journal_dirty_metadata(handle_t *handle, struct buffer_head *bh) { transaction_t *transaction = handle->h_transaction; journal_t *journal; struct journal_head *jh; int ret = 0; if (!buffer_jbd(bh)) return -EUCLEAN; /* * We don't grab jh reference here since the buffer must be part * of the running transaction. */ jh = bh2jh(bh); jbd2_debug(5, "journal_head %p\n", jh); JBUFFER_TRACE(jh, "entry"); /* * This and the following assertions are unreliable since we may see jh * in inconsistent state unless we grab bh_state lock. But this is * crucial to catch bugs so let's do a reliable check until the * lockless handling is fully proven. */ if (data_race(jh->b_transaction != transaction && jh->b_next_transaction != transaction)) { spin_lock(&jh->b_state_lock); J_ASSERT_JH(jh, jh->b_transaction == transaction || jh->b_next_transaction == transaction); spin_unlock(&jh->b_state_lock); } if (jh->b_modified == 1) { /* If it's in our transaction it must be in BJ_Metadata list. */ if (data_race(jh->b_transaction == transaction && jh->b_jlist != BJ_Metadata)) { spin_lock(&jh->b_state_lock); if (jh->b_transaction == transaction && jh->b_jlist != BJ_Metadata) pr_err("JBD2: assertion failure: h_type=%u " "h_line_no=%u block_no=%llu jlist=%u\n", handle->h_type, handle->h_line_no, (unsigned long long) bh->b_blocknr, jh->b_jlist); J_ASSERT_JH(jh, jh->b_transaction != transaction || jh->b_jlist == BJ_Metadata); spin_unlock(&jh->b_state_lock); } goto out; } journal = transaction->t_journal; spin_lock(&jh->b_state_lock); if (is_handle_aborted(handle)) { /* * Check journal aborting with @jh->b_state_lock locked, * since 'jh->b_transaction' could be replaced with * 'jh->b_next_transaction' during old transaction * committing if journal aborted, which may fail * assertion on 'jh->b_frozen_data == NULL'. */ ret = -EROFS; goto out_unlock_bh; } if (jh->b_modified == 0) { /* * This buffer's got modified and becoming part * of the transaction. This needs to be done * once a transaction -bzzz */ if (WARN_ON_ONCE(jbd2_handle_buffer_credits(handle) <= 0)) { ret = -ENOSPC; goto out_unlock_bh; } jh->b_modified = 1; handle->h_total_credits--; } /* * fastpath, to avoid expensive locking. If this buffer is already * on the running transaction's metadata list there is nothing to do. * Nobody can take it off again because there is a handle open. * I _think_ we're OK here with SMP barriers - a mistaken decision will * result in this test being false, so we go in and take the locks. */ if (jh->b_transaction == transaction && jh->b_jlist == BJ_Metadata) { JBUFFER_TRACE(jh, "fastpath"); if (unlikely(jh->b_transaction != journal->j_running_transaction)) { printk(KERN_ERR "JBD2: %s: " "jh->b_transaction (%llu, %p, %u) != " "journal->j_running_transaction (%p, %u)\n", journal->j_devname, (unsigned long long) bh->b_blocknr, jh->b_transaction, jh->b_transaction ? jh->b_transaction->t_tid : 0, journal->j_running_transaction, journal->j_running_transaction ? journal->j_running_transaction->t_tid : 0); ret = -EINVAL; } goto out_unlock_bh; } set_buffer_jbddirty(bh); /* * Metadata already on the current transaction list doesn't * need to be filed. Metadata on another transaction's list must * be committing, and will be refiled once the commit completes: * leave it alone for now. */ if (jh->b_transaction != transaction) { JBUFFER_TRACE(jh, "already on other transaction"); if (unlikely(((jh->b_transaction != journal->j_committing_transaction)) || (jh->b_next_transaction != transaction))) { printk(KERN_ERR "jbd2_journal_dirty_metadata: %s: " "bad jh for block %llu: " "transaction (%p, %u), " "jh->b_transaction (%p, %u), " "jh->b_next_transaction (%p, %u), jlist %u\n", journal->j_devname, (unsigned long long) bh->b_blocknr, transaction, transaction->t_tid, jh->b_transaction, jh->b_transaction ? jh->b_transaction->t_tid : 0, jh->b_next_transaction, jh->b_next_transaction ? jh->b_next_transaction->t_tid : 0, jh->b_jlist); WARN_ON(1); ret = -EINVAL; } /* And this case is illegal: we can't reuse another * transaction's data buffer, ever. */ goto out_unlock_bh; } /* That test should have eliminated the following case: */ J_ASSERT_JH(jh, jh->b_frozen_data == NULL); JBUFFER_TRACE(jh, "file as BJ_Metadata"); spin_lock(&journal->j_list_lock); __jbd2_journal_file_buffer(jh, transaction, BJ_Metadata); spin_unlock(&journal->j_list_lock); out_unlock_bh: spin_unlock(&jh->b_state_lock); out: JBUFFER_TRACE(jh, "exit"); return ret; } /** * jbd2_journal_forget() - bforget() for potentially-journaled buffers. * @handle: transaction handle * @bh: bh to 'forget' * * We can only do the bforget if there are no commits pending against the * buffer. If the buffer is dirty in the current running transaction we * can safely unlink it. * * bh may not be a journalled buffer at all - it may be a non-JBD * buffer which came off the hashtable. Check for this. * * Decrements bh->b_count by one. * * Allow this call even if the handle has aborted --- it may be part of * the caller's cleanup after an abort. */ int jbd2_journal_forget(handle_t *handle, struct buffer_head *bh) { transaction_t *transaction = handle->h_transaction; journal_t *journal; struct journal_head *jh; int drop_reserve = 0; int err = 0; int was_modified = 0; if (is_handle_aborted(handle)) return -EROFS; journal = transaction->t_journal; BUFFER_TRACE(bh, "entry"); jh = jbd2_journal_grab_journal_head(bh); if (!jh) { __bforget(bh); return 0; } spin_lock(&jh->b_state_lock); /* Critical error: attempting to delete a bitmap buffer, maybe? * Don't do any jbd operations, and return an error. */ if (!J_EXPECT_JH(jh, !jh->b_committed_data, "inconsistent data on disk")) { err = -EIO; goto drop; } /* keep track of whether or not this transaction modified us */ was_modified = jh->b_modified; /* * The buffer's going from the transaction, we must drop * all references -bzzz */ jh->b_modified = 0; if (jh->b_transaction == transaction) { J_ASSERT_JH(jh, !jh->b_frozen_data); /* If we are forgetting a buffer which is already part * of this transaction, then we can just drop it from * the transaction immediately. */ clear_buffer_dirty(bh); clear_buffer_jbddirty(bh); JBUFFER_TRACE(jh, "belongs to current transaction: unfile"); /* * we only want to drop a reference if this transaction * modified the buffer */ if (was_modified) drop_reserve = 1; /* * We are no longer going to journal this buffer. * However, the commit of this transaction is still * important to the buffer: the delete that we are now * processing might obsolete an old log entry, so by * committing, we can satisfy the buffer's checkpoint. * * So, if we have a checkpoint on the buffer, we should * now refile the buffer on our BJ_Forget list so that * we know to remove the checkpoint after we commit. */ spin_lock(&journal->j_list_lock); if (jh->b_cp_transaction) { __jbd2_journal_temp_unlink_buffer(jh); __jbd2_journal_file_buffer(jh, transaction, BJ_Forget); } else { __jbd2_journal_unfile_buffer(jh); jbd2_journal_put_journal_head(jh); } spin_unlock(&journal->j_list_lock); } else if (jh->b_transaction) { J_ASSERT_JH(jh, (jh->b_transaction == journal->j_committing_transaction)); /* However, if the buffer is still owned by a prior * (committing) transaction, we can't drop it yet... */ JBUFFER_TRACE(jh, "belongs to older transaction"); /* ... but we CAN drop it from the new transaction through * marking the buffer as freed and set j_next_transaction to * the new transaction, so that not only the commit code * knows it should clear dirty bits when it is done with the * buffer, but also the buffer can be checkpointed only * after the new transaction commits. */ set_buffer_freed(bh); if (!jh->b_next_transaction) { spin_lock(&journal->j_list_lock); jh->b_next_transaction = transaction; spin_unlock(&journal->j_list_lock); } else { J_ASSERT(jh->b_next_transaction == transaction); /* * only drop a reference if this transaction modified * the buffer */ if (was_modified) drop_reserve = 1; } } else { /* * Finally, if the buffer is not belongs to any * transaction, we can just drop it now if it has no * checkpoint. */ spin_lock(&journal->j_list_lock); if (!jh->b_cp_transaction) { JBUFFER_TRACE(jh, "belongs to none transaction"); spin_unlock(&journal->j_list_lock); goto drop; } /* * Otherwise, if the buffer has been written to disk, * it is safe to remove the checkpoint and drop it. */ if (jbd2_journal_try_remove_checkpoint(jh) >= 0) { spin_unlock(&journal->j_list_lock); goto drop; } /* * The buffer is still not written to disk, we should * attach this buffer to current transaction so that the * buffer can be checkpointed only after the current * transaction commits. */ clear_buffer_dirty(bh); __jbd2_journal_file_buffer(jh, transaction, BJ_Forget); spin_unlock(&journal->j_list_lock); } drop: __brelse(bh); spin_unlock(&jh->b_state_lock); jbd2_journal_put_journal_head(jh); if (drop_reserve) { /* no need to reserve log space for this block -bzzz */ handle->h_total_credits++; } return err; } /** * jbd2_journal_stop() - complete a transaction * @handle: transaction to complete. * * All done for a particular handle. * * There is not much action needed here. We just return any remaining * buffer credits to the transaction and remove the handle. The only * complication is that we need to start a commit operation if the * filesystem is marked for synchronous update. * * jbd2_journal_stop itself will not usually return an error, but it may * do so in unusual circumstances. In particular, expect it to * return -EIO if a jbd2_journal_abort has been executed since the * transaction began. */ int jbd2_journal_stop(handle_t *handle) { transaction_t *transaction = handle->h_transaction; journal_t *journal; int err = 0, wait_for_commit = 0; tid_t tid; pid_t pid; if (--handle->h_ref > 0) { jbd2_debug(4, "h_ref %d -> %d\n", handle->h_ref + 1, handle->h_ref); if (is_handle_aborted(handle)) return -EIO; return 0; } if (!transaction) { /* * Handle is already detached from the transaction so there is * nothing to do other than free the handle. */ memalloc_nofs_restore(handle->saved_alloc_context); goto free_and_exit; } journal = transaction->t_journal; tid = transaction->t_tid; if (is_handle_aborted(handle)) err = -EIO; jbd2_debug(4, "Handle %p going down\n", handle); trace_jbd2_handle_stats(journal->j_fs_dev->bd_dev, tid, handle->h_type, handle->h_line_no, jiffies - handle->h_start_jiffies, handle->h_sync, handle->h_requested_credits, (handle->h_requested_credits - handle->h_total_credits)); /* * Implement synchronous transaction batching. If the handle * was synchronous, don't force a commit immediately. Let's * yield and let another thread piggyback onto this * transaction. Keep doing that while new threads continue to * arrive. It doesn't cost much - we're about to run a commit * and sleep on IO anyway. Speeds up many-threaded, many-dir * operations by 30x or more... * * We try and optimize the sleep time against what the * underlying disk can do, instead of having a static sleep * time. This is useful for the case where our storage is so * fast that it is more optimal to go ahead and force a flush * and wait for the transaction to be committed than it is to * wait for an arbitrary amount of time for new writers to * join the transaction. We achieve this by measuring how * long it takes to commit a transaction, and compare it with * how long this transaction has been running, and if run time * < commit time then we sleep for the delta and commit. This * greatly helps super fast disks that would see slowdowns as * more threads started doing fsyncs. * * But don't do this if this process was the most recent one * to perform a synchronous write. We do this to detect the * case where a single process is doing a stream of sync * writes. No point in waiting for joiners in that case. * * Setting max_batch_time to 0 disables this completely. */ pid = current->pid; if (handle->h_sync && journal->j_last_sync_writer != pid && journal->j_max_batch_time) { u64 commit_time, trans_time; journal->j_last_sync_writer = pid; read_lock(&journal->j_state_lock); commit_time = journal->j_average_commit_time; read_unlock(&journal->j_state_lock); trans_time = ktime_to_ns(ktime_sub(ktime_get(), transaction->t_start_time)); commit_time = max_t(u64, commit_time, 1000*journal->j_min_batch_time); commit_time = min_t(u64, commit_time, 1000*journal->j_max_batch_time); if (trans_time < commit_time) { ktime_t expires = ktime_add_ns(ktime_get(), commit_time); set_current_state(TASK_UNINTERRUPTIBLE); schedule_hrtimeout(&expires, HRTIMER_MODE_ABS); } } if (handle->h_sync) transaction->t_synchronous_commit = 1; /* * If the handle is marked SYNC, we need to set another commit * going! We also want to force a commit if the transaction is too * old now. */ if (handle->h_sync || time_after_eq(jiffies, transaction->t_expires)) { /* Do this even for aborted journals: an abort still * completes the commit thread, it just doesn't write * anything to disk. */ jbd2_debug(2, "transaction too old, requesting commit for " "handle %p\n", handle); /* This is non-blocking */ jbd2_log_start_commit(journal, tid); /* * Special case: JBD2_SYNC synchronous updates require us * to wait for the commit to complete. */ if (handle->h_sync && !(current->flags & PF_MEMALLOC)) wait_for_commit = 1; } /* * Once stop_this_handle() drops t_updates, the transaction could start * committing on us and eventually disappear. So we must not * dereference transaction pointer again after calling * stop_this_handle(). */ stop_this_handle(handle); if (wait_for_commit) err = jbd2_log_wait_commit(journal, tid); free_and_exit: if (handle->h_rsv_handle) jbd2_free_handle(handle->h_rsv_handle); jbd2_free_handle(handle); return err; } /* * * List management code snippets: various functions for manipulating the * transaction buffer lists. * */ /* * Append a buffer to a transaction list, given the transaction's list head * pointer. * * j_list_lock is held. * * jh->b_state_lock is held. */ static inline void __blist_add_buffer(struct journal_head **list, struct journal_head *jh) { if (!*list) { jh->b_tnext = jh->b_tprev = jh; *list = jh; } else { /* Insert at the tail of the list to preserve order */ struct journal_head *first = *list, *last = first->b_tprev; jh->b_tprev = last; jh->b_tnext = first; last->b_tnext = first->b_tprev = jh; } } /* * Remove a buffer from a transaction list, given the transaction's list * head pointer. * * Called with j_list_lock held, and the journal may not be locked. * * jh->b_state_lock is held. */ static inline void __blist_del_buffer(struct journal_head **list, struct journal_head *jh) { if (*list == jh) { *list = jh->b_tnext; if (*list == jh) *list = NULL; } jh->b_tprev->b_tnext = jh->b_tnext; jh->b_tnext->b_tprev = jh->b_tprev; } /* * Remove a buffer from the appropriate transaction list. * * Note that this function can *change* the value of * bh->b_transaction->t_buffers, t_forget, t_shadow_list, t_log_list or * t_reserved_list. If the caller is holding onto a copy of one of these * pointers, it could go bad. Generally the caller needs to re-read the * pointer from the transaction_t. * * Called under j_list_lock. */ static void __jbd2_journal_temp_unlink_buffer(struct journal_head *jh) { struct journal_head **list = NULL; transaction_t *transaction; struct buffer_head *bh = jh2bh(jh); lockdep_assert_held(&jh->b_state_lock); transaction = jh->b_transaction; if (transaction) assert_spin_locked(&transaction->t_journal->j_list_lock); J_ASSERT_JH(jh, jh->b_jlist < BJ_Types); if (jh->b_jlist != BJ_None) J_ASSERT_JH(jh, transaction != NULL); switch (jh->b_jlist) { case BJ_None: return; case BJ_Metadata: transaction->t_nr_buffers--; J_ASSERT_JH(jh, transaction->t_nr_buffers >= 0); list = &transaction->t_buffers; break; case BJ_Forget: list = &transaction->t_forget; break; case BJ_Shadow: list = &transaction->t_shadow_list; break; case BJ_Reserved: list = &transaction->t_reserved_list; break; } __blist_del_buffer(list, jh); jh->b_jlist = BJ_None; if (transaction && is_journal_aborted(transaction->t_journal)) clear_buffer_jbddirty(bh); else if (test_clear_buffer_jbddirty(bh)) mark_buffer_dirty(bh); /* Expose it to the VM */ } /* * Remove buffer from all transactions. The caller is responsible for dropping * the jh reference that belonged to the transaction. * * Called with bh_state lock and j_list_lock */ static void __jbd2_journal_unfile_buffer(struct journal_head *jh) { J_ASSERT_JH(jh, jh->b_transaction != NULL); J_ASSERT_JH(jh, jh->b_next_transaction == NULL); __jbd2_journal_temp_unlink_buffer(jh); jh->b_transaction = NULL; } void jbd2_journal_unfile_buffer(journal_t *journal, struct journal_head *jh) { struct buffer_head *bh = jh2bh(jh); /* Get reference so that buffer cannot be freed before we unlock it */ get_bh(bh); spin_lock(&jh->b_state_lock); spin_lock(&journal->j_list_lock); __jbd2_journal_unfile_buffer(jh); spin_unlock(&journal->j_list_lock); spin_unlock(&jh->b_state_lock); jbd2_journal_put_journal_head(jh); __brelse(bh); } /** * jbd2_journal_try_to_free_buffers() - try to free page buffers. * @journal: journal for operation * @folio: Folio to detach data from. * * For all the buffers on this page, * if they are fully written out ordered data, move them onto BUF_CLEAN * so try_to_free_buffers() can reap them. * * This function returns non-zero if we wish try_to_free_buffers() * to be called. We do this if the page is releasable by try_to_free_buffers(). * We also do it if the page has locked or dirty buffers and the caller wants * us to perform sync or async writeout. * * This complicates JBD locking somewhat. We aren't protected by the * BKL here. We wish to remove the buffer from its committing or * running transaction's ->t_datalist via __jbd2_journal_unfile_buffer. * * This may *change* the value of transaction_t->t_datalist, so anyone * who looks at t_datalist needs to lock against this function. * * Even worse, someone may be doing a jbd2_journal_dirty_data on this * buffer. So we need to lock against that. jbd2_journal_dirty_data() * will come out of the lock with the buffer dirty, which makes it * ineligible for release here. * * Who else is affected by this? hmm... Really the only contender * is do_get_write_access() - it could be looking at the buffer while * journal_try_to_free_buffer() is changing its state. But that * cannot happen because we never reallocate freed data as metadata * while the data is part of a transaction. Yes? * * Return false on failure, true on success */ bool jbd2_journal_try_to_free_buffers(journal_t *journal, struct folio *folio) { struct buffer_head *head; struct buffer_head *bh; bool ret = false; J_ASSERT(folio_test_locked(folio)); head = folio_buffers(folio); bh = head; do { struct journal_head *jh; /* * We take our own ref against the journal_head here to avoid * having to add tons of locking around each instance of * jbd2_journal_put_journal_head(). */ jh = jbd2_journal_grab_journal_head(bh); if (!jh) continue; spin_lock(&jh->b_state_lock); if (!jh->b_transaction && !jh->b_next_transaction) { spin_lock(&journal->j_list_lock); /* Remove written-back checkpointed metadata buffer */ if (jh->b_cp_transaction != NULL) jbd2_journal_try_remove_checkpoint(jh); spin_unlock(&journal->j_list_lock); } spin_unlock(&jh->b_state_lock); jbd2_journal_put_journal_head(jh); if (buffer_jbd(bh)) goto busy; } while ((bh = bh->b_this_page) != head); ret = try_to_free_buffers(folio); busy: return ret; } /* * This buffer is no longer needed. If it is on an older transaction's * checkpoint list we need to record it on this transaction's forget list * to pin this buffer (and hence its checkpointing transaction) down until * this transaction commits. If the buffer isn't on a checkpoint list, we * release it. * Returns non-zero if JBD no longer has an interest in the buffer. * * Called under j_list_lock. * * Called under jh->b_state_lock. */ static int __dispose_buffer(struct journal_head *jh, transaction_t *transaction) { int may_free = 1; struct buffer_head *bh = jh2bh(jh); if (jh->b_cp_transaction) { JBUFFER_TRACE(jh, "on running+cp transaction"); __jbd2_journal_temp_unlink_buffer(jh); /* * We don't want to write the buffer anymore, clear the * bit so that we don't confuse checks in * __journal_file_buffer */ clear_buffer_dirty(bh); __jbd2_journal_file_buffer(jh, transaction, BJ_Forget); may_free = 0; } else { JBUFFER_TRACE(jh, "on running transaction"); __jbd2_journal_unfile_buffer(jh); jbd2_journal_put_journal_head(jh); } return may_free; } /* * jbd2_journal_invalidate_folio * * This code is tricky. It has a number of cases to deal with. * * There are two invariants which this code relies on: * * i_size must be updated on disk before we start calling invalidate_folio * on the data. * * This is done in ext3 by defining an ext3_setattr method which * updates i_size before truncate gets going. By maintaining this * invariant, we can be sure that it is safe to throw away any buffers * attached to the current transaction: once the transaction commits, * we know that the data will not be needed. * * Note however that we can *not* throw away data belonging to the * previous, committing transaction! * * Any disk blocks which *are* part of the previous, committing * transaction (and which therefore cannot be discarded immediately) are * not going to be reused in the new running transaction * * The bitmap committed_data images guarantee this: any block which is * allocated in one transaction and removed in the next will be marked * as in-use in the committed_data bitmap, so cannot be reused until * the next transaction to delete the block commits. This means that * leaving committing buffers dirty is quite safe: the disk blocks * cannot be reallocated to a different file and so buffer aliasing is * not possible. * * * The above applies mainly to ordered data mode. In writeback mode we * don't make guarantees about the order in which data hits disk --- in * particular we don't guarantee that new dirty data is flushed before * transaction commit --- so it is always safe just to discard data * immediately in that mode. --sct */ /* * The journal_unmap_buffer helper function returns zero if the buffer * concerned remains pinned as an anonymous buffer belonging to an older * transaction. * * We're outside-transaction here. Either or both of j_running_transaction * and j_committing_transaction may be NULL. */ static int journal_unmap_buffer(journal_t *journal, struct buffer_head *bh, int partial_page) { transaction_t *transaction; struct journal_head *jh; int may_free = 1; BUFFER_TRACE(bh, "entry"); /* * It is safe to proceed here without the j_list_lock because the * buffers cannot be stolen by try_to_free_buffers as long as we are * holding the page lock. --sct */ jh = jbd2_journal_grab_journal_head(bh); if (!jh) goto zap_buffer_unlocked; /* OK, we have data buffer in journaled mode */ write_lock(&journal->j_state_lock); spin_lock(&jh->b_state_lock); spin_lock(&journal->j_list_lock); /* * We cannot remove the buffer from checkpoint lists until the * transaction adding inode to orphan list (let's call it T) * is committed. Otherwise if the transaction changing the * buffer would be cleaned from the journal before T is * committed, a crash will cause that the correct contents of * the buffer will be lost. On the other hand we have to * clear the buffer dirty bit at latest at the moment when the * transaction marking the buffer as freed in the filesystem * structures is committed because from that moment on the * block can be reallocated and used by a different page. * Since the block hasn't been freed yet but the inode has * already been added to orphan list, it is safe for us to add * the buffer to BJ_Forget list of the newest transaction. * * Also we have to clear buffer_mapped flag of a truncated buffer * because the buffer_head may be attached to the page straddling * i_size (can happen only when blocksize < pagesize) and thus the * buffer_head can be reused when the file is extended again. So we end * up keeping around invalidated buffers attached to transactions' * BJ_Forget list just to stop checkpointing code from cleaning up * the transaction this buffer was modified in. */ transaction = jh->b_transaction; if (transaction == NULL) { /* First case: not on any transaction. If it * has no checkpoint link, then we can zap it: * it's a writeback-mode buffer so we don't care * if it hits disk safely. */ if (!jh->b_cp_transaction) { JBUFFER_TRACE(jh, "not on any transaction: zap"); goto zap_buffer; } if (!buffer_dirty(bh)) { /* bdflush has written it. We can drop it now */ __jbd2_journal_remove_checkpoint(jh); goto zap_buffer; } /* OK, it must be in the journal but still not * written fully to disk: it's metadata or * journaled data... */ if (journal->j_running_transaction) { /* ... and once the current transaction has * committed, the buffer won't be needed any * longer. */ JBUFFER_TRACE(jh, "checkpointed: add to BJ_Forget"); may_free = __dispose_buffer(jh, journal->j_running_transaction); goto zap_buffer; } else { /* There is no currently-running transaction. So the * orphan record which we wrote for this file must have * passed into commit. We must attach this buffer to * the committing transaction, if it exists. */ if (journal->j_committing_transaction) { JBUFFER_TRACE(jh, "give to committing trans"); may_free = __dispose_buffer(jh, journal->j_committing_transaction); goto zap_buffer; } else { /* The orphan record's transaction has * committed. We can cleanse this buffer */ clear_buffer_jbddirty(bh); __jbd2_journal_remove_checkpoint(jh); goto zap_buffer; } } } else if (transaction == journal->j_committing_transaction) { JBUFFER_TRACE(jh, "on committing transaction"); /* * The buffer is committing, we simply cannot touch * it. If the page is straddling i_size we have to wait * for commit and try again. */ if (partial_page) { spin_unlock(&journal->j_list_lock); spin_unlock(&jh->b_state_lock); write_unlock(&journal->j_state_lock); jbd2_journal_put_journal_head(jh); /* Already zapped buffer? Nothing to do... */ if (!bh->b_bdev) return 0; return -EBUSY; } /* * OK, buffer won't be reachable after truncate. We just clear * b_modified to not confuse transaction credit accounting, and * set j_next_transaction to the running transaction (if there * is one) and mark buffer as freed so that commit code knows * it should clear dirty bits when it is done with the buffer. */ set_buffer_freed(bh); if (journal->j_running_transaction && buffer_jbddirty(bh)) jh->b_next_transaction = journal->j_running_transaction; jh->b_modified = 0; spin_unlock(&journal->j_list_lock); spin_unlock(&jh->b_state_lock); write_unlock(&journal->j_state_lock); jbd2_journal_put_journal_head(jh); return 0; } else { /* Good, the buffer belongs to the running transaction. * We are writing our own transaction's data, not any * previous one's, so it is safe to throw it away * (remember that we expect the filesystem to have set * i_size already for this truncate so recovery will not * expose the disk blocks we are discarding here.) */ J_ASSERT_JH(jh, transaction == journal->j_running_transaction); JBUFFER_TRACE(jh, "on running transaction"); may_free = __dispose_buffer(jh, transaction); } zap_buffer: /* * This is tricky. Although the buffer is truncated, it may be reused * if blocksize < pagesize and it is attached to the page straddling * EOF. Since the buffer might have been added to BJ_Forget list of the * running transaction, journal_get_write_access() won't clear * b_modified and credit accounting gets confused. So clear b_modified * here. */ jh->b_modified = 0; spin_unlock(&journal->j_list_lock); spin_unlock(&jh->b_state_lock); write_unlock(&journal->j_state_lock); jbd2_journal_put_journal_head(jh); zap_buffer_unlocked: clear_buffer_dirty(bh); J_ASSERT_BH(bh, !buffer_jbddirty(bh)); clear_buffer_mapped(bh); clear_buffer_req(bh); clear_buffer_new(bh); clear_buffer_delay(bh); clear_buffer_unwritten(bh); bh->b_bdev = NULL; return may_free; } /** * jbd2_journal_invalidate_folio() * @journal: journal to use for flush... * @folio: folio to flush * @offset: start of the range to invalidate * @length: length of the range to invalidate * * Reap page buffers containing data after in the specified range in page. * Can return -EBUSY if buffers are part of the committing transaction and * the page is straddling i_size. Caller then has to wait for current commit * and try again. */ int jbd2_journal_invalidate_folio(journal_t *journal, struct folio *folio, size_t offset, size_t length) { struct buffer_head *head, *bh, *next; unsigned int stop = offset + length; unsigned int curr_off = 0; int partial_page = (offset || length < folio_size(folio)); int may_free = 1; int ret = 0; if (!folio_test_locked(folio)) BUG(); head = folio_buffers(folio); if (!head) return 0; BUG_ON(stop > folio_size(folio) || stop < length); /* We will potentially be playing with lists other than just the * data lists (especially for journaled data mode), so be * cautious in our locking. */ bh = head; do { unsigned int next_off = curr_off + bh->b_size; next = bh->b_this_page; if (next_off > stop) return 0; if (offset <= curr_off) { /* This block is wholly outside the truncation point */ lock_buffer(bh); ret = journal_unmap_buffer(journal, bh, partial_page); unlock_buffer(bh); if (ret < 0) return ret; may_free &= ret; } curr_off = next_off; bh = next; } while (bh != head); if (!partial_page) { if (may_free && try_to_free_buffers(folio)) J_ASSERT(!folio_buffers(folio)); } return 0; } /* * File a buffer on the given transaction list. */ void __jbd2_journal_file_buffer(struct journal_head *jh, transaction_t *transaction, int jlist) { struct journal_head **list = NULL; int was_dirty = 0; struct buffer_head *bh = jh2bh(jh); lockdep_assert_held(&jh->b_state_lock); assert_spin_locked(&transaction->t_journal->j_list_lock); J_ASSERT_JH(jh, jh->b_jlist < BJ_Types); J_ASSERT_JH(jh, jh->b_transaction == transaction || jh->b_transaction == NULL); if (jh->b_transaction && jh->b_jlist == jlist) return; if (jlist == BJ_Metadata || jlist == BJ_Reserved || jlist == BJ_Shadow || jlist == BJ_Forget) { /* * For metadata buffers, we track dirty bit in buffer_jbddirty * instead of buffer_dirty. We should not see a dirty bit set * here because we clear it in do_get_write_access but e.g. * tune2fs can modify the sb and set the dirty bit at any time * so we try to gracefully handle that. */ if (buffer_dirty(bh)) warn_dirty_buffer(bh); if (test_clear_buffer_dirty(bh) || test_clear_buffer_jbddirty(bh)) was_dirty = 1; } if (jh->b_transaction) __jbd2_journal_temp_unlink_buffer(jh); else jbd2_journal_grab_journal_head(bh); jh->b_transaction = transaction; switch (jlist) { case BJ_None: J_ASSERT_JH(jh, !jh->b_committed_data); J_ASSERT_JH(jh, !jh->b_frozen_data); return; case BJ_Metadata: transaction->t_nr_buffers++; list = &transaction->t_buffers; break; case BJ_Forget: list = &transaction->t_forget; break; case BJ_Shadow: list = &transaction->t_shadow_list; break; case BJ_Reserved: list = &transaction->t_reserved_list; break; } __blist_add_buffer(list, jh); jh->b_jlist = jlist; if (was_dirty) set_buffer_jbddirty(bh); } void jbd2_journal_file_buffer(struct journal_head *jh, transaction_t *transaction, int jlist) { spin_lock(&jh->b_state_lock); spin_lock(&transaction->t_journal->j_list_lock); __jbd2_journal_file_buffer(jh, transaction, jlist); spin_unlock(&transaction->t_journal->j_list_lock); spin_unlock(&jh->b_state_lock); } /* * Remove a buffer from its current buffer list in preparation for * dropping it from its current transaction entirely. If the buffer has * already started to be used by a subsequent transaction, refile the * buffer on that transaction's metadata list. * * Called under j_list_lock * Called under jh->b_state_lock * * When this function returns true, there's no next transaction to refile to * and the caller has to drop jh reference through * jbd2_journal_put_journal_head(). */ bool __jbd2_journal_refile_buffer(struct journal_head *jh) { int was_dirty, jlist; struct buffer_head *bh = jh2bh(jh); lockdep_assert_held(&jh->b_state_lock); if (jh->b_transaction) assert_spin_locked(&jh->b_transaction->t_journal->j_list_lock); /* If the buffer is now unused, just drop it. */ if (jh->b_next_transaction == NULL) { __jbd2_journal_unfile_buffer(jh); return true; } /* * It has been modified by a later transaction: add it to the new * transaction's metadata list. */ was_dirty = test_clear_buffer_jbddirty(bh); __jbd2_journal_temp_unlink_buffer(jh); /* * b_transaction must be set, otherwise the new b_transaction won't * be holding jh reference */ J_ASSERT_JH(jh, jh->b_transaction != NULL); /* * We set b_transaction here because b_next_transaction will inherit * our jh reference and thus __jbd2_journal_file_buffer() must not * take a new one. */ WRITE_ONCE(jh->b_transaction, jh->b_next_transaction); WRITE_ONCE(jh->b_next_transaction, NULL); if (buffer_freed(bh)) jlist = BJ_Forget; else if (jh->b_modified) jlist = BJ_Metadata; else jlist = BJ_Reserved; __jbd2_journal_file_buffer(jh, jh->b_transaction, jlist); J_ASSERT_JH(jh, jh->b_transaction->t_state == T_RUNNING); if (was_dirty) set_buffer_jbddirty(bh); return false; } /* * __jbd2_journal_refile_buffer() with necessary locking added. We take our * bh reference so that we can safely unlock bh. * * The jh and bh may be freed by this call. */ void jbd2_journal_refile_buffer(journal_t *journal, struct journal_head *jh) { bool drop; spin_lock(&jh->b_state_lock); spin_lock(&journal->j_list_lock); drop = __jbd2_journal_refile_buffer(jh); spin_unlock(&jh->b_state_lock); spin_unlock(&journal->j_list_lock); if (drop) jbd2_journal_put_journal_head(jh); } /* * File inode in the inode list of the handle's transaction */ static int jbd2_journal_file_inode(handle_t *handle, struct jbd2_inode *jinode, unsigned long flags, loff_t start_byte, loff_t end_byte) { transaction_t *transaction = handle->h_transaction; journal_t *journal; if (is_handle_aborted(handle)) return -EROFS; journal = transaction->t_journal; jbd2_debug(4, "Adding inode %lu, tid:%d\n", jinode->i_vfs_inode->i_ino, transaction->t_tid); spin_lock(&journal->j_list_lock); jinode->i_flags |= flags; if (jinode->i_dirty_end) { jinode->i_dirty_start = min(jinode->i_dirty_start, start_byte); jinode->i_dirty_end = max(jinode->i_dirty_end, end_byte); } else { jinode->i_dirty_start = start_byte; jinode->i_dirty_end = end_byte; } /* Is inode already attached where we need it? */ if (jinode->i_transaction == transaction || jinode->i_next_transaction == transaction) goto done; /* * We only ever set this variable to 1 so the test is safe. Since * t_need_data_flush is likely to be set, we do the test to save some * cacheline bouncing */ if (!transaction->t_need_data_flush) transaction->t_need_data_flush = 1; /* On some different transaction's list - should be * the committing one */ if (jinode->i_transaction) { J_ASSERT(jinode->i_next_transaction == NULL); J_ASSERT(jinode->i_transaction == journal->j_committing_transaction); jinode->i_next_transaction = transaction; goto done; } /* Not on any transaction list... */ J_ASSERT(!jinode->i_next_transaction); jinode->i_transaction = transaction; list_add(&jinode->i_list, &transaction->t_inode_list); done: spin_unlock(&journal->j_list_lock); return 0; } int jbd2_journal_inode_ranged_write(handle_t *handle, struct jbd2_inode *jinode, loff_t start_byte, loff_t length) { return jbd2_journal_file_inode(handle, jinode, JI_WRITE_DATA | JI_WAIT_DATA, start_byte, start_byte + length - 1); } int jbd2_journal_inode_ranged_wait(handle_t *handle, struct jbd2_inode *jinode, loff_t start_byte, loff_t length) { return jbd2_journal_file_inode(handle, jinode, JI_WAIT_DATA, start_byte, start_byte + length - 1); } /* * File truncate and transaction commit interact with each other in a * non-trivial way. If a transaction writing data block A is * committing, we cannot discard the data by truncate until we have * written them. Otherwise if we crashed after the transaction with * write has committed but before the transaction with truncate has * committed, we could see stale data in block A. This function is a * helper to solve this problem. It starts writeout of the truncated * part in case it is in the committing transaction. * * Filesystem code must call this function when inode is journaled in * ordered mode before truncation happens and after the inode has been * placed on orphan list with the new inode size. The second condition * avoids the race that someone writes new data and we start * committing the transaction after this function has been called but * before a transaction for truncate is started (and furthermore it * allows us to optimize the case where the addition to orphan list * happens in the same transaction as write --- we don't have to write * any data in such case). */ int jbd2_journal_begin_ordered_truncate(journal_t *journal, struct jbd2_inode *jinode, loff_t new_size) { transaction_t *inode_trans, *commit_trans; int ret = 0; /* This is a quick check to avoid locking if not necessary */ if (!jinode->i_transaction) goto out; /* Locks are here just to force reading of recent values, it is * enough that the transaction was not committing before we started * a transaction adding the inode to orphan list */ read_lock(&journal->j_state_lock); commit_trans = journal->j_committing_transaction; read_unlock(&journal->j_state_lock); spin_lock(&journal->j_list_lock); inode_trans = jinode->i_transaction; spin_unlock(&journal->j_list_lock); if (inode_trans == commit_trans) { ret = filemap_fdatawrite_range(jinode->i_vfs_inode->i_mapping, new_size, LLONG_MAX); if (ret) jbd2_journal_abort(journal, ret); } out: return ret; }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1