| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Shuming Fan | 759 | 98.96% | 3 | 75.00% |
| Pierre-Louis Bossart | 8 | 1.04% | 1 | 25.00% |
| Total | 767 | 4 |
/* SPDX-License-Identifier: GPL-2.0-only */ /* * rt711-sdca.h -- RT711 SDCA ALSA SoC audio driver header * * Copyright(c) 2021 Realtek Semiconductor Corp. */ #ifndef __RT711_SDCA_H__ #define __RT711_SDCA_H__ #include <linux/pm.h> #include <linux/regmap.h> #include <linux/soundwire/sdw.h> #include <linux/soundwire/sdw_type.h> #include <sound/soc.h> #include <linux/workqueue.h> struct rt711_sdca_priv { struct regmap *regmap, *mbq_regmap; struct snd_soc_component *component; struct sdw_slave *slave; struct sdw_bus_params params; bool hw_init; bool first_hw_init; struct snd_soc_jack *hs_jack; struct delayed_work jack_detect_work; struct delayed_work jack_btn_check_work; struct mutex calibrate_mutex; /* for headset calibration */ struct mutex disable_irq_lock; /* SDCA irq lock protection */ bool disable_irq; int jack_type, jd_src; unsigned int scp_sdca_stat1, scp_sdca_stat2; int hw_ver; bool fu0f_dapm_mute, fu0f_mixer_l_mute, fu0f_mixer_r_mute; bool fu1e_dapm_mute, fu1e_mixer_l_mute, fu1e_mixer_r_mute; }; /* NID */ #define RT711_AUDIO_FUNCTION_GROUP 0x01 #define RT711_DAC_OUT2 0x03 #define RT711_ADC_IN1 0x09 #define RT711_ADC_IN2 0x08 #define RT711_DMIC1 0x12 #define RT711_DMIC2 0x13 #define RT711_MIC2 0x19 #define RT711_LINE1 0x1a #define RT711_LINE2 0x1b #define RT711_BEEP 0x1d #define RT711_VENDOR_REG 0x20 #define RT711_HP_OUT 0x21 #define RT711_MIXER_IN1 0x22 #define RT711_MIXER_IN2 0x23 #define RT711_INLINE_CMD 0x55 #define RT711_VENDOR_CALI 0x58 #define RT711_VENDOR_IMS_DRE 0x5b #define RT711_VENDOR_VAD 0x5e #define RT711_VENDOR_ANALOG_CTL 0x5f #define RT711_VENDOR_HDA_CTL 0x61 /* Index (NID:20h) */ #define RT711_JD_PRODUCT_NUM 0x00 #define RT711_DMIC_CTL1 0x06 #define RT711_JD_CTL1 0x08 #define RT711_JD_CTL2 0x09 #define RT711_CC_DET1 0x11 #define RT711_PARA_VERB_CTL 0x1a #define RT711_COMBO_JACK_AUTO_CTL1 0x45 #define RT711_COMBO_JACK_AUTO_CTL2 0x46 #define RT711_COMBO_JACK_AUTO_CTL3 0x47 #define RT711_INLINE_CMD_CTL 0x48 #define RT711_DIGITAL_MISC_CTRL4 0x4a #define RT711_JD_CTRL6 0x6a #define RT711_VREFOUT_CTL 0x6b #define RT711_GPIO_TEST_MODE_CTL2 0x6d #define RT711_FSM_CTL 0x6f #define RT711_IRQ_FLAG_TABLE1 0x80 #define RT711_IRQ_FLAG_TABLE2 0x81 #define RT711_IRQ_FLAG_TABLE3 0x82 #define RT711_HP_FSM_CTL 0x83 #define RT711_TX_RX_MUX_CTL 0x91 #define RT711_FILTER_SRC_SEL 0xb0 #define RT711_ADC27_VOL_SET 0xb7 /* Index (NID:58h) */ #define RT711_DAC_DC_CALI_CTL1 0x00 #define RT711_DAC_DC_CALI_CTL2 0x01 /* Index (NID:5bh) */ #define RT711_IMS_DIGITAL_CTL1 0x00 #define RT711_HP_IMS_RESULT_L 0x20 #define RT711_HP_IMS_RESULT_R 0x21 /* Index (NID:5eh) */ #define RT711_VAD_SRAM_CTL1 0x10 /* Index (NID:5fh) */ #define RT711_MISC_POWER_CTL0 0x01 #define RT711_MISC_POWER_CTL4 0x05 /* Index (NID:61h) */ #define RT711_HDA_LEGACY_MUX_CTL1 0x00 #define RT711_HDA_LEGACY_UNSOLICITED_CTL 0x03 #define RT711_HDA_LEGACY_CONFIG_CTL 0x06 #define RT711_HDA_LEGACY_RESET_CTL 0x08 #define RT711_HDA_LEGACY_GPIO_CTL 0x0a #define RT711_ADC08_09_PDE_CTL 0x24 #define RT711_GE_MODE_RELATED_CTL 0x35 #define RT711_PUSH_BTN_INT_CTL0 0x36 #define RT711_PUSH_BTN_INT_CTL1 0x37 #define RT711_PUSH_BTN_INT_CTL2 0x38 #define RT711_PUSH_BTN_INT_CTL6 0x3c #define RT711_PUSH_BTN_INT_CTL7 0x3d #define RT711_PUSH_BTN_INT_CTL9 0x3f /* DAC DC offset calibration control-1 (0x00)(NID:20h) */ #define RT711_DAC_DC_CALI_TRIGGER (0x1 << 15) #define RT711_DAC_DC_CALI_CLK_EN (0x1 << 14) #define RT711_DAC_DC_FORCE_CALI_RST (0x1 << 3) /* jack detect control 1 (0x08)(NID:20h) */ #define RT711_JD2_DIGITAL_MODE_SEL (0x1 << 1) /* jack detect control 2 (0x09)(NID:20h) */ #define RT711_JD2_2PORT_200K_DECODE_HP (0x1 << 13) #define RT711_JD2_2PORT_100K_DECODE_MASK (0x1 << 12) #define RT711_JD2_2PORT_100K_DECODE_HP (0x0 << 12) #define RT711_HP_JD_SEL_JD1 (0x0 << 1) #define RT711_HP_JD_SEL_JD2 (0x1 << 1) /* CC DET1 (0x11)(NID:20h) */ #define RT711_HP_JD_FINAL_RESULT_CTL_JD12 (0x1 << 10) #define RT711_HP_JD_FINAL_RESULT_CTL_CCDET (0x0 << 10) #define RT711_POW_CC1_AGPI (0x1 << 5) #define RT711_POW_CC1_AGPI_ON (0x1 << 5) #define RT711_POW_CC1_AGPI_OFF (0x0 << 5) /* Parameter & Verb control (0x1a)(NID:20h) */ #define RT711_HIDDEN_REG_SW_RESET (0x1 << 14) /* combo jack auto switch control 2 (0x46)(NID:20h) */ #define RT711_COMBOJACK_AUTO_DET_STATUS (0x1 << 11) #define RT711_COMBOJACK_AUTO_DET_TRS (0x1 << 10) #define RT711_COMBOJACK_AUTO_DET_CTIA (0x1 << 9) #define RT711_COMBOJACK_AUTO_DET_OMTP (0x1 << 8) /* FSM control (0x6f)(NID:20h) */ #define RT711_CALI_CTL (0x0 << 0) #define RT711_COMBOJACK_CTL (0x1 << 0) #define RT711_IMS_CTL (0x2 << 0) #define RT711_DEPOP_CTL (0x3 << 0) #define RT711_FSM_IMP_EN (0x1 << 6) /* Impedance Sense Digital Control 1 (0x00)(NID:5bh) */ #define RT711_TRIGGER_IMS (0x1 << 15) #define RT711_IMS_EN (0x1 << 6) #define RT711_EAPD_HIGH 0x2 #define RT711_EAPD_LOW 0x0 #define RT711_MUTE_SFT 7 /* set input/output mapping to payload[14][15] separately */ #define RT711_DIR_IN_SFT 6 #define RT711_DIR_OUT_SFT 7 /* RC Calibration register */ #define RT711_RC_CAL_STATUS 0x320c /* Buffer address for HID */ #define RT711_BUF_ADDR_HID1 0x44030000 #define RT711_BUF_ADDR_HID2 0x44030020 /* RT711 SDCA Control - function number */ #define FUNC_NUM_JACK_CODEC 0x01 #define FUNC_NUM_MIC_ARRAY 0x02 #define FUNC_NUM_HID 0x03 /* RT711 SDCA entity */ #define RT711_SDCA_ENT_HID01 0x01 #define RT711_SDCA_ENT_GE49 0x49 #define RT711_SDCA_ENT_USER_FU05 0x05 #define RT711_SDCA_ENT_USER_FU0F 0x0f #define RT711_SDCA_ENT_USER_FU1E 0x1e #define RT711_SDCA_ENT_PLATFORM_FU15 0x15 #define RT711_SDCA_ENT_PLATFORM_FU44 0x44 #define RT711_SDCA_ENT_PDE28 0x28 #define RT711_SDCA_ENT_PDE29 0x29 #define RT711_SDCA_ENT_PDE2A 0x2a #define RT711_SDCA_ENT_CS01 0x01 #define RT711_SDCA_ENT_CS11 0x11 #define RT711_SDCA_ENT_CS1F 0x1f #define RT711_SDCA_ENT_OT1 0x06 #define RT711_SDCA_ENT_LINE1 0x09 #define RT711_SDCA_ENT_LINE2 0x31 #define RT711_SDCA_ENT_PDELINE2 0x36 #define RT711_SDCA_ENT_USER_FU9 0x41 /* RT711 SDCA control */ #define RT711_SDCA_CTL_SAMPLE_FREQ_INDEX 0x10 #define RT711_SDCA_CTL_FU_CH_GAIN 0x0b #define RT711_SDCA_CTL_FU_MUTE 0x01 #define RT711_SDCA_CTL_FU_VOLUME 0x02 #define RT711_SDCA_CTL_HIDTX_CURRENT_OWNER 0x10 #define RT711_SDCA_CTL_HIDTX_SET_OWNER_TO_DEVICE 0x11 #define RT711_SDCA_CTL_HIDTX_MESSAGE_OFFSET 0x12 #define RT711_SDCA_CTL_HIDTX_MESSAGE_LENGTH 0x13 #define RT711_SDCA_CTL_SELECTED_MODE 0x01 #define RT711_SDCA_CTL_DETECTED_MODE 0x02 #define RT711_SDCA_CTL_REQ_POWER_STATE 0x01 #define RT711_SDCA_CTL_VENDOR_DEF 0x30 /* RT711 SDCA channel */ #define CH_L 0x01 #define CH_R 0x02 /* sample frequency index */ #define RT711_SDCA_RATE_44100HZ 0x08 #define RT711_SDCA_RATE_48000HZ 0x09 #define RT711_SDCA_RATE_96000HZ 0x0b #define RT711_SDCA_RATE_192000HZ 0x0d enum { RT711_AIF1, RT711_AIF2, RT711_AIFS, }; enum rt711_sdca_jd_src { RT711_JD_NULL, RT711_JD1, RT711_JD2, RT711_JD2_100K }; enum rt711_sdca_ver { RT711_VER_VD0, RT711_VER_VD1 }; int rt711_sdca_io_init(struct device *dev, struct sdw_slave *slave); int rt711_sdca_init(struct device *dev, struct regmap *regmap, struct regmap *mbq_regmap, struct sdw_slave *slave); int rt711_sdca_jack_detect(struct rt711_sdca_priv *rt711, bool *hp, bool *mic); #endif /* __RT711_SDCA_H__ */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1