Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Ilpo Järvinen | 841 | 51.72% | 25 | 60.98% |
Fenghua Yu | 424 | 26.08% | 8 | 19.51% |
Maciej Wieczor-Retman | 288 | 17.71% | 1 | 2.44% |
Sai Praneeth | 67 | 4.12% | 4 | 9.76% |
Shaopeng Tan | 6 | 0.37% | 3 | 7.32% |
Total | 1626 | 41 |
// SPDX-License-Identifier: GPL-2.0 /* * Cache Allocation Technology (CAT) test * * Copyright (C) 2018 Intel Corporation * * Authors: * Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>, * Fenghua Yu <fenghua.yu@intel.com> */ #include "resctrl.h" #include <unistd.h> #define RESULT_FILE_NAME "result_cat" #define NUM_OF_RUNS 5 /* * Minimum difference in LLC misses between a test with n+1 bits CBM to the * test with n bits is MIN_DIFF_PERCENT_PER_BIT * (n - 1). With e.g. 5 vs 4 * bits in the CBM mask, the minimum difference must be at least * MIN_DIFF_PERCENT_PER_BIT * (4 - 1) = 3 percent. * * The relationship between number of used CBM bits and difference in LLC * misses is not expected to be linear. With a small number of bits, the * margin is smaller than with larger number of bits. For selftest purposes, * however, linear approach is enough because ultimately only pass/fail * decision has to be made and distinction between strong and stronger * signal is irrelevant. */ #define MIN_DIFF_PERCENT_PER_BIT 1UL static int show_results_info(__u64 sum_llc_val, int no_of_bits, unsigned long cache_span, unsigned long min_diff_percent, unsigned long num_of_runs, bool platform, __s64 *prev_avg_llc_val) { __u64 avg_llc_val = 0; float avg_diff; int ret = 0; avg_llc_val = sum_llc_val / num_of_runs; if (*prev_avg_llc_val) { float delta = (__s64)(avg_llc_val - *prev_avg_llc_val); avg_diff = delta / *prev_avg_llc_val; ret = platform && (avg_diff * 100) < (float)min_diff_percent; ksft_print_msg("%s Check cache miss rate changed more than %.1f%%\n", ret ? "Fail:" : "Pass:", (float)min_diff_percent); ksft_print_msg("Percent diff=%.1f\n", avg_diff * 100); } *prev_avg_llc_val = avg_llc_val; show_cache_info(no_of_bits, avg_llc_val, cache_span, true); return ret; } /* Remove the highest bit from CBM */ static unsigned long next_mask(unsigned long current_mask) { return current_mask & (current_mask >> 1); } static int check_results(struct resctrl_val_param *param, const char *cache_type, unsigned long cache_total_size, unsigned long full_cache_mask, unsigned long current_mask) { char *token_array[8], temp[512]; __u64 sum_llc_perf_miss = 0; __s64 prev_avg_llc_val = 0; unsigned long alloc_size; int runs = 0; int fail = 0; int ret; FILE *fp; ksft_print_msg("Checking for pass/fail\n"); fp = fopen(param->filename, "r"); if (!fp) { ksft_perror("Cannot open file"); return -1; } while (fgets(temp, sizeof(temp), fp)) { char *token = strtok(temp, ":\t"); int fields = 0; int bits; while (token) { token_array[fields++] = token; token = strtok(NULL, ":\t"); } sum_llc_perf_miss += strtoull(token_array[3], NULL, 0); runs++; if (runs < NUM_OF_RUNS) continue; if (!current_mask) { ksft_print_msg("Unexpected empty cache mask\n"); break; } alloc_size = cache_portion_size(cache_total_size, current_mask, full_cache_mask); bits = count_bits(current_mask); ret = show_results_info(sum_llc_perf_miss, bits, alloc_size / 64, MIN_DIFF_PERCENT_PER_BIT * (bits - 1), runs, get_vendor() == ARCH_INTEL, &prev_avg_llc_val); if (ret) fail = 1; runs = 0; sum_llc_perf_miss = 0; current_mask = next_mask(current_mask); } fclose(fp); return fail; } void cat_test_cleanup(void) { remove(RESULT_FILE_NAME); } /* * cat_test - Execute CAT benchmark and measure cache misses * @test: Test information structure * @uparams: User supplied parameters * @param: Parameters passed to cat_test() * @span: Buffer size for the benchmark * @current_mask Start mask for the first iteration * * Run CAT selftest by varying the allocated cache portion and comparing the * impact on cache misses (the result analysis is done in check_results() * and show_results_info(), not in this function). * * One bit is removed from the CAT allocation bit mask (in current_mask) for * each subsequent test which keeps reducing the size of the allocated cache * portion. A single test flushes the buffer, reads it to warm up the cache, * and reads the buffer again. The cache misses are measured during the last * read pass. * * Return: 0 when the test was run, < 0 on error. */ static int cat_test(const struct resctrl_test *test, const struct user_params *uparams, struct resctrl_val_param *param, size_t span, unsigned long current_mask) { char *resctrl_val = param->resctrl_val; struct perf_event_read pe_read; struct perf_event_attr pea; cpu_set_t old_affinity; unsigned char *buf; char schemata[64]; int ret, i, pe_fd; pid_t bm_pid; if (strcmp(param->filename, "") == 0) sprintf(param->filename, "stdio"); bm_pid = getpid(); /* Taskset benchmark to specified cpu */ ret = taskset_benchmark(bm_pid, uparams->cpu, &old_affinity); if (ret) return ret; /* Write benchmark to specified con_mon grp, mon_grp in resctrl FS*/ ret = write_bm_pid_to_resctrl(bm_pid, param->ctrlgrp, param->mongrp, resctrl_val); if (ret) goto reset_affinity; perf_event_attr_initialize(&pea, PERF_COUNT_HW_CACHE_MISSES); perf_event_initialize_read_format(&pe_read); pe_fd = perf_open(&pea, bm_pid, uparams->cpu); if (pe_fd < 0) { ret = -1; goto reset_affinity; } buf = alloc_buffer(span, 1); if (!buf) { ret = -1; goto pe_close; } while (current_mask) { snprintf(schemata, sizeof(schemata), "%lx", param->mask & ~current_mask); ret = write_schemata("", schemata, uparams->cpu, test->resource); if (ret) goto free_buf; snprintf(schemata, sizeof(schemata), "%lx", current_mask); ret = write_schemata(param->ctrlgrp, schemata, uparams->cpu, test->resource); if (ret) goto free_buf; for (i = 0; i < NUM_OF_RUNS; i++) { mem_flush(buf, span); fill_cache_read(buf, span, true); ret = perf_event_reset_enable(pe_fd); if (ret) goto free_buf; fill_cache_read(buf, span, true); ret = perf_event_measure(pe_fd, &pe_read, param->filename, bm_pid); if (ret) goto free_buf; } current_mask = next_mask(current_mask); } free_buf: free(buf); pe_close: close(pe_fd); reset_affinity: taskset_restore(bm_pid, &old_affinity); return ret; } static int cat_run_test(const struct resctrl_test *test, const struct user_params *uparams) { unsigned long long_mask, start_mask, full_cache_mask; unsigned long cache_total_size = 0; int n = uparams->bits; unsigned int start; int count_of_bits; size_t span; int ret; ret = get_full_cbm(test->resource, &full_cache_mask); if (ret) return ret; /* Get the largest contiguous exclusive portion of the cache */ ret = get_mask_no_shareable(test->resource, &long_mask); if (ret) return ret; /* Get L3/L2 cache size */ ret = get_cache_size(uparams->cpu, test->resource, &cache_total_size); if (ret) return ret; ksft_print_msg("Cache size :%lu\n", cache_total_size); count_of_bits = count_contiguous_bits(long_mask, &start); if (!n) n = count_of_bits / 2; if (n > count_of_bits - 1) { ksft_print_msg("Invalid input value for no_of_bits n!\n"); ksft_print_msg("Please enter value in range 1 to %d\n", count_of_bits - 1); return -1; } start_mask = create_bit_mask(start, n); struct resctrl_val_param param = { .resctrl_val = CAT_STR, .ctrlgrp = "c1", .filename = RESULT_FILE_NAME, .num_of_runs = 0, }; param.mask = long_mask; span = cache_portion_size(cache_total_size, start_mask, full_cache_mask); remove(param.filename); ret = cat_test(test, uparams, ¶m, span, start_mask); if (ret) goto out; ret = check_results(¶m, test->resource, cache_total_size, full_cache_mask, start_mask); out: cat_test_cleanup(); return ret; } static int noncont_cat_run_test(const struct resctrl_test *test, const struct user_params *uparams) { unsigned long full_cache_mask, cont_mask, noncont_mask; unsigned int eax, ebx, ecx, edx, sparse_masks; int bit_center, ret; char schemata[64]; /* Check to compare sparse_masks content to CPUID output. */ ret = resource_info_unsigned_get(test->resource, "sparse_masks", &sparse_masks); if (ret) return ret; if (!strcmp(test->resource, "L3")) __cpuid_count(0x10, 1, eax, ebx, ecx, edx); else if (!strcmp(test->resource, "L2")) __cpuid_count(0x10, 2, eax, ebx, ecx, edx); else return -EINVAL; if (sparse_masks != ((ecx >> 3) & 1)) { ksft_print_msg("CPUID output doesn't match 'sparse_masks' file content!\n"); return 1; } /* Write checks initialization. */ ret = get_full_cbm(test->resource, &full_cache_mask); if (ret < 0) return ret; bit_center = count_bits(full_cache_mask) / 2; /* * The bit_center needs to be at least 3 to properly calculate the CBM * hole in the noncont_mask. If it's smaller return an error since the * cache mask is too short and that shouldn't happen. */ if (bit_center < 3) return -EINVAL; cont_mask = full_cache_mask >> bit_center; /* Contiguous mask write check. */ snprintf(schemata, sizeof(schemata), "%lx", cont_mask); ret = write_schemata("", schemata, uparams->cpu, test->resource); if (ret) { ksft_print_msg("Write of contiguous CBM failed\n"); return 1; } /* * Non-contiguous mask write check. CBM has a 0xf hole approximately in the middle. * Output is compared with support information to catch any edge case errors. */ noncont_mask = ~(0xfUL << (bit_center - 2)) & full_cache_mask; snprintf(schemata, sizeof(schemata), "%lx", noncont_mask); ret = write_schemata("", schemata, uparams->cpu, test->resource); if (ret && sparse_masks) ksft_print_msg("Non-contiguous CBMs supported but write of non-contiguous CBM failed\n"); else if (ret && !sparse_masks) ksft_print_msg("Non-contiguous CBMs not supported and write of non-contiguous CBM failed as expected\n"); else if (!ret && !sparse_masks) ksft_print_msg("Non-contiguous CBMs not supported but write of non-contiguous CBM succeeded\n"); return !ret == !sparse_masks; } static bool noncont_cat_feature_check(const struct resctrl_test *test) { if (!resctrl_resource_exists(test->resource)) return false; return resource_info_file_exists(test->resource, "sparse_masks"); } struct resctrl_test l3_cat_test = { .name = "L3_CAT", .group = "CAT", .resource = "L3", .feature_check = test_resource_feature_check, .run_test = cat_run_test, }; struct resctrl_test l3_noncont_cat_test = { .name = "L3_NONCONT_CAT", .group = "CAT", .resource = "L3", .feature_check = noncont_cat_feature_check, .run_test = noncont_cat_run_test, }; struct resctrl_test l2_noncont_cat_test = { .name = "L2_NONCONT_CAT", .group = "CAT", .resource = "L2", .feature_check = noncont_cat_feature_check, .run_test = noncont_cat_run_test, };
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1