Contributors: 5
Author Tokens Token Proportion Commits Commit Proportion
Houlong Wei 111 60.99% 2 13.33%
Dennis YC Hsieh 35 19.23% 7 46.67%
jason-jh.lin 27 14.84% 3 20.00%
Bibby Hsieh 8 4.40% 2 13.33%
Chun-Kuang Hu 1 0.55% 1 6.67%
Total 182 15 


/* SPDX-License-Identifier: GPL-2.0 */
/*
 * Copyright (c) 2018 MediaTek Inc.
 *
 */

#ifndef __MTK_CMDQ_MAILBOX_H__
#define __MTK_CMDQ_MAILBOX_H__

#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/types.h>

#define CMDQ_INST_SIZE			8 /* instruction is 64-bit */
#define CMDQ_SUBSYS_SHIFT		16
#define CMDQ_OP_CODE_SHIFT		24
#define CMDQ_JUMP_PASS			CMDQ_INST_SIZE

#define CMDQ_WFE_UPDATE			BIT(31)
#define CMDQ_WFE_UPDATE_VALUE		BIT(16)
#define CMDQ_WFE_WAIT			BIT(15)
#define CMDQ_WFE_WAIT_VALUE		0x1

/*
 * WFE arg_b
 * bit 0-11: wait value
 * bit 15: 1 - wait, 0 - no wait
 * bit 16-27: update value
 * bit 31: 1 - update, 0 - no update
 */
#define CMDQ_WFE_OPTION			(CMDQ_WFE_WAIT | CMDQ_WFE_WAIT_VALUE)

/** cmdq event maximum */
#define CMDQ_MAX_EVENT			0x3ff

/*
 * CMDQ_CODE_MASK:
 *   set write mask
 *   format: op mask
 * CMDQ_CODE_WRITE:
 *   write value into target register
 *   format: op subsys address value
 * CMDQ_CODE_JUMP:
 *   jump by offset
 *   format: op offset
 * CMDQ_CODE_WFE:
 *   wait for event and clear
 *   it is just clear if no wait
 *   format: [wait]  op event update:1 to_wait:1 wait:1
 *           [clear] op event update:1 to_wait:0 wait:0
 * CMDQ_CODE_EOC:
 *   end of command
 *   format: op irq_flag
 */
enum cmdq_code {
	CMDQ_CODE_MASK = 0x02,
	CMDQ_CODE_WRITE = 0x04,
	CMDQ_CODE_POLL = 0x08,
	CMDQ_CODE_JUMP = 0x10,
	CMDQ_CODE_WFE = 0x20,
	CMDQ_CODE_EOC = 0x40,
	CMDQ_CODE_READ_S = 0x80,
	CMDQ_CODE_WRITE_S = 0x90,
	CMDQ_CODE_WRITE_S_MASK = 0x91,
	CMDQ_CODE_LOGIC = 0xa0,
};

struct cmdq_cb_data {
	int			sta;
	struct cmdq_pkt		*pkt;
};

struct cmdq_mbox_priv {
	u8 shift_pa;
	dma_addr_t mminfra_offset;
};

struct cmdq_pkt {
	void			*va_base;
	dma_addr_t		pa_base;
	size_t			cmd_buf_size; /* command occupied size */
	size_t			buf_size; /* real buffer size */
	struct cmdq_mbox_priv	priv; /* for generating instruction */
};

/**
 * cmdq_get_mbox_priv() - get the private data of mailbox channel
 * @chan: mailbox channel
 * @priv: pointer to store the private data of mailbox channel
 *
 * While generating the GCE instruction to command buffer, the private data
 * of GCE hardware may need to be referenced, such as the shift bits of
 * physical address.
 *
 * This function should be called before generating the GCE instruction.
 */
void cmdq_get_mbox_priv(struct mbox_chan *chan, struct cmdq_mbox_priv *priv);

/**
 * cmdq_get_shift_pa() - get the shift bits of physical address
 * @chan: mailbox channel
 *
 * GCE can only fetch the command buffer address from a 32-bit register.
 * Some SOCs support more than 32-bit command buffer address for GCE, which
 * requires some shift bits to make the address fit into the 32-bit register.
 *
 * Return: the shift bits of physical address
 */
u8 cmdq_get_shift_pa(struct mbox_chan *chan);

#endif /* __MTK_CMDQ_MAILBOX_H__ */